New install of solaris 10 and I cannot see the other 5 harddrives

I am a bit rusty on solaris but here is the issue and exscuse my clulessness. Just installed 10 on an e450. At the ok prompt you can query the hardware and the hard drives are there. From the OS level, they do not appear. In the solaris console I can only see the hard drive the OS is on. Question is simple; how do you make the OS see the other hard drives. Linux I use disk druid. In 8 I used disksuite, but it has been about six years since I have messed with it.

It sounds like all that was done during the installation as to set up one disk for the OS install and the remaining drive were not selected and partitioned.
Run format and see if the disks show up. If they are there, then they likely need partitioning and file systems added with newfs command. Last thing is to make sure they get mounted by adding entries in /etc/vfstab.
If you want to do volumes go to docs.sun.com and dowload the Sun Volume Manager documentation under Solaris 10.
Regards

Similar Messages

Have 3 sites on line and need to update them but each time i click on the site icon it opens always the same one... and i cannot access the other 2....

Have 3 sites on line and need to update them but each time i click on the site icon it opens always the same one... and i cannot access the other 2....

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
You can download an already compiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

I used to have over 2000 songs in my itunes library, now there are only a few and I cannot find the others.

I used to have over 2000 songs in my itunes library, now there are only a few and I cannot find the others.

See this post.
tt2

Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an Apple I-Tunes software update, but I am not sure. Software or hardware??

Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an I-Tunes software update, but I am not sure. Is this likely a software issue or is the shuffle not working correctly?

Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an I-Tunes software update, but I am not sure. Is this likely a software issue or is the shuffle not working correctly?

I am using mac book pro and I cannot see the video of my chatmate using skype or fb.please help

i am using mac book pro and I cannot see the video of my chatmate using skype or fb.please help

Is your version of Skype known to work with your operating system version?

HT1843 hi my bluetooth cannot see the other bluetooth devices. When it is picked up by a different device tries to pair with it but the pairing does not occur. what can I do apart from throwing this **** thing in the bin?

hi my bluetooth cannot see the other bluetooth devices. When it is picked up by a different device tries to pair with it but the pairing does not occur. what can I do apart from throwing this **** thing in the bin?

It isn't supposed to pair with the MacBook. You can use WiFi to connect but not Bluetooth. You can setup a personal HotSpot on the iPhone and connect the MacBook, or setup the MacBook AirPort to create a network and attach the iPhone, and use the USB cable to connect the iPhone to the MacBook for syncing and backup purposes.
The communications are rather limited.

I upgraded to iOS8 on my iphone and now cannot see the thumbnails of my pictures when I try to download onto my computer.

I have an iphone 4 and an HP Pavillion with windows 7. I always have been able to connect my iphone to my laptop and open
the DCIM folder and see the picture icons so I can pick the ones I want to download. After upgrading to iOS8 I cannot see the icons after a
few seconds of connecting the phone to the computer. They all turn into the windows icon.
I do not want to try the icloud for windows control panel unless I can pick the pictures that will be transferred. I don't want all the pictures I take on my computer.

http://support.apple.com/kb/HT1808

I have enabling home sharing on my mac and pc and I cannot see the icom on itunes

I cannot see the home shared on my MAC or my PC.
I alos cannot share playlist either when I try.......HELP!

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

I have 2 iphoto libraries - when I opened iphoto today I can only see one (my old one) and I cannot find the other to "switch" too..

I had an old library on an old mac. I then started a new one on my new Mac and was able to easily switch between the two..
I opened iphoto today and I cannot find my old library which I'd added new photos too.
Hence all photos from the last year have disappeared...
Either this OR:
Half of my new photos have disappeared from my new library AND my old library has disappeared.
I've tried to find the library using a couple of ideas on this forum but i still can't find them....

What happens when you try to export from the library? Where are you trying to export to? Are both libraries located in the same Place? If not where are they located. If on an external HD how is that HD formatted?
How much free space do you have on your HD(s)?

Suddenly the facbook games page margens have become hidden by the face book section and I cannot see the arrows to control the games,

It's as if the game page has been maximised behind the facebook face page, this happened suddenly, one day I could see the complet game page with its control icons in the bottom right hand corner, the next they appeared behind the face page, to play them now I have to use the Internet explorer browser

I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

I am using Mail for emails and I seem to have two different windows that switch between the two. The emails are the same but the second window opens when I click on any details and I cannot see the top of my screen with control icons for internet, file

I am not very tech savy and apologize in advance if my question is not clear. I use the Mail application on my mac and I have two users on my computer, one for gmail and another for my work email. All email addresses appear in the mail application on one page. When I open my email and click on a message it often goes to the other user screen and cuts off the top of my screen which shows the bar for Chrome, file, edit, view, history etc....Still functional but very annoying. How do I choose a user screen and stop having it switch back and forth.
Thank you.

Mail troubleshooting - Yosemite
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline

My 2nd generation iPod nano screen is showing lines and I cannot see the whole menu. How can I fix this problem?

I believe that my wife disconnected the iPod nano (2nd Gen.) improperly and now the screen has a whole bunch of lines. I can see the screens moving when I move to the next screen. But it's just lines. Any help would be greatly appreciated.

well unfortunatley your warranty is over so the device is not covered, BUT sounds like you have interupting signals being sent from a stuck home button constantly being pressed and maybe even a digitizer problem (the touch screen). You can try to restore your ipod to your computer to see if it might be some kind of software related issue. Just restore to the last sync you have on iTunes. But FIRST...I would try to Reset your ipod.
Go to Settings>General>Reset> Reset all settings.

What happens when your iphone 4s is glitched, as in it won't work? The screen is blue and black and you cannot see the lockscreen?

Okay, so my friend accidently hit my iPhone out of my hand and it landed on its screen when it fell. I was wondering if Apple could repair it? The screen is all glitchy, you can only see a huge blue streak with a black background. You can't see the "need to be charged" symbol. Does this happen usually? I'm really worried because I do not want to waste money and buy another phone. Anyone know any trouble shooting or things I could do that might work to get the screen back to the way it was?

Hello 23435,
Welcome to the Apple Support Communities!
I understand that your iPhone was knocked out of your hand and now it displays blue and black colors on the display. It does sound like this iPhone may need to be evaluated for service. If you would like more information about this process, please refer to the attached web link below.
iPhone Other Repair Options - Apple Support
Have a great day,
Joe

When I open the firefox page it fills the whole page and I cannot see the top toolbar

I was using firefox and I don't know what happened but everything went real small. Now when I open firefox home page it fills the whole screen and I can see anything at the top, nor can I get out of it without using the task manager.

Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Command+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
If you are in full screen mode then hover the mouse to the top of the screen to make the Navigation Toolbar and Tab bar appear.<br>Click the Maximize button (top right corner of the Navigation Toolbar) to leave full screen mode or right-click empty space on a toolbar and choose "Exit Full Screen Mode" or press the F11 key.

When I try to use my phone, it does not light and I cannot see the messages or who is calling

When my phone rings or I get a message, the phone does not light up, therefore I cannot see anything on my phone

My phone does not light up at all, when I turn it on or anytime.

New install of solaris 10 and I cannot see the other 5 harddrives

Similar Messages

Maybe you are looking for