New install of Tiger LONG time to boot
I just can’t believe it! I am in the same boat!!! What’s this all about??????
I received my Tiger late yesterday and I installed it last night and got the gray screen with the Apple logo upon re-start. I left the computer running, turned off the monitor and just went to bed. When I got up this morning I turned on the monitor and things were running OK - or so it appeared. I ran software update and had to restart the computer. Hung up again with the gray screen again. I forced the computer to reboot to the install CD and performed disk repair (all OK) and repaired permissions and attempted a reboot. You got it, back to the gray screen with Apple logo. Now I am upset. Went to breakfast with friends and upon my return the computer was running correctly. I was gone for 3 hrs so do not know how long it took to completely boot into Tiger. What the heck is going on here?? At this point it was obvious there is a problem so came here to see if I can learn anything.
Note:
. I am installing Tiger on my G4 (DA 466) desktop.
. 800+ memory installed.
. Already performed disk repair and repair permissions from install CD.
. Current status:
. G4 is booted into Tiger.
Any ideas????
Thanks/
Charlie
This is normal behavior. The first restart after a major update to the OS (even the ones available in software update), often cause the startup component database (I can't recall the official name of it right now) to be invalidated, and needs to be rebuilt. On older machines, this can take quite some time (my 500 MHz iBook has taken upwards of 10 minutes to re-build the database).
Subsequent restarts which aren't cause by an OS update will be much faster.
Similar Messages
-
Computer still taking a long time to boot
I have a late 2013 21.5” iMac (Model: ME087LL/A) with a 1TB hard drive (5400 rpm). I just switch from Windows to Mac, so I tried to keep everything as simple as possible on the transfer of files. I had only added Kaspersky Antivirus and Western Digital Tools.
Boot times and operation seemed normal so I transferred my music, pictures, and some files. My computer started running slow with just one user and started taking a long time to boot. I found that since I added about 24,000 pictures to iPhoto, the Mac was trying to send all these pictures to iCloud in the background. I stopped using iCloud for iPhoto and that seemed to speed up the normal operation once the computer is booted.
The computer still seemed to take a very long time to boot. It would now take 3 minutes to get from turning it on to being able to use Safari. I uninstalled Kaspersky Antivirus and Western Digital Tools using each company’s uninstallers so I know they are completely off the computer.
Any ideas on how to get back to the fast boot time? I am only using about 150 GBs of the 1 T drive so I don’t think that is causing the issue. What should I expect for a boot time on a brand new Late 2013 iMac? Or should I try to re-install Maverick and try to get a fresh start?
Any advice would be appreciated so I don’t feel like I made the wrong choice going to Mac. I'm kicking myself because the computer was so fast when I just got it.Seventy one thanks for trying to help me out. I really appreciate it. Log is below. You are absolutely right. Kaspersky and WD look like they still have something (as well as google??). Is there anything else that stands out? How would I go about getting rid of them? Re-Install? Clean Re-Install?
EtreCheck version: 1.9.12 (48)
Report generated June 16, 2014 at 6:19:51 PM EDT
Hardware Information:
iMac (21.5-inch, Late 2013) (Verified)
iMac - model: iMac14,3
1 2.9 GHz Intel Core i5 CPU: 4 cores
8 GB RAM
Video Information:
NVIDIA GeForce GT 750M - VRAM: 1024 MB
iMac 1920 x 1080
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 0:8:41
Disk Information:
APPLE HDD HTS541010A9E662 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (847.45 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[loaded] com.kaspersky.kext.klif (3.0.3a40) Support
[loaded] com.kaspersky.nke (1.6.3a13) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.westerndigital.ErasePrivilegedHelper.plist Support
User Launch Agents:
[loaded] com.google.keystone.agent.plist Support
User Login Items:
None
Internet Plug-ins:
SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.125 - SDK 10.6 Support
Flash Player: Version: 14.0.0.125 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 141.47 GB
Destinations:
Mac Backup [Local] (Last used)
Total size: 2
Total number of backups: 5
Oldest backup: 2014-06-08 00:03:53 +0000
Last backup: 2014-06-16 03:07:06 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 141.47 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
2% WindowServer
1% fontd
0% hidd
0% dpd
Top Processes by Memory:
98 MB Finder
74 MB WindowServer
66 MB ocspd
66 MB mds_stores
66 MB Dock
Virtual Memory Information:
5.37 GB Free RAM
1.69 GB Active RAM
233 MB Inactive RAM
731 MB Wired RAM
233 MB Page-ins
0 B Page-outs -
New LUN Takes A long Time To Format and Errors Out
Good afternoon,<o:p></o:p>
I have a Hyper-V Cluster composed of 4 nodes and these nodes are able to access multiple CSVs (14 in total). I recently requested a new LUN (LUN 15)to be provisioned
to my Hyper-V cluster in the size of 500GB. Here is my problem:<o:p></o:p>
1. Formatting of a 500GB LUN (with quick format selected) should not take more than a few seconds. Instead, the quick format takes about 2hrs if not longer. I have actually
seen it go for half the day.<o:p></o:p>
2. Once the formatting has completed (no errors), taking the formatted LUN offline freezes the Computer Management screen and shows the status (Not Responding). This
will take place for 30 minutes or less and show that the LUN has been taken offline.<o:p></o:p>
3. In the Failover Cluster Manager, detecting the disks takes about 15 minutes. Once the available LUNs have been detected I can add the 500GB LUN to the Disks screen
without any problems.<o:p></o:p>
4. While in the Disks screen, adding the LUN to the Clustered Shared Volumes takes about 5 minutes (too long).<o:p></o:p>
Already seeing that there is a problem, I went ahead and used the Hyper-V Manager to create a 200GB vhd on the new LUN which has been added to the CSV. The bar indicating
the progress of the vhd creation does not display any progress (no green progress bar appears, not even a tiny bit of it) and after 3 hours (more or less) I receive an error, stating that the creation of the vhd failed.
<o:p>NOTE: The vhd shows up in Volume 9 (LUN 15) but I can only bet that it will not work, plus I would not want to work with a vhd file which failed during the
creation process.</o:p>
<o:p>Long story short, I repeated the above steps to see if that was a temporary problem, but it is not. The same problem occurs no matter which Hyper-V cluster
node the operations are performed on. I would like to add, that I tested the creation of a vhd on an already configured LUN and the creation was completed successfully, and within a n expected time frame.</o:p>
NOTE: When LUN 15 errors out, it's status shows "Failed" in the Failover Cluster Manager. This in turn, causes the re-scanning of available disks to take forever (in Computer Management) and it keeps searching. Pretty
much, the fail of one LUN affects the entire functionality of the entire Hyper-V Cluster.
Errors Listed In Event Details For LUN 15:
1. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer accessible from this cluster node because of error 'ERROR_TIMEOUT(1460)'. Please troubleshoot this node's connectivity to the storage device and
network connectivity.
Event ID: 5142; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
2. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer available on this node because of 'STATUS_IO_TIMEOUT(c00000b5)'. All I/O will temporarily be queued until a path to the volume is reestablished.
Event ID: 5120; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
3.Cluster resource 'Cluster Disk 5' of type 'Physical Disk' in clustered role '4530acc9-8552-4696-b6c3-636ff8d58c46' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover
Cluster Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event ID: 1069; Source: Microsoft-Windows Failover Clustering;Task Category: Resource Control Manager
4.
Cluster resource 'Cluster Disk 5' (resource type 'Physical Disk', DLL 'clusres.dll') did not respond to a request in a timely fashion. Cluster health detection will attempt to automatically recover by terminating the Resource Hosting Subsystem (RHS)
process running this resource. This may affect other resources hosted in the same RHS process. The resources will then be restarted.
The suspect resource 'Cluster Disk 5' will be marked to run in an isolated RHS process to avoid impacting multiple resources in the event that this resource failure occurs again. Please ensure services, applications, or underlying infrastructure
(such as storage or networking) associated with the suspect resource is functioning properly.
Event ID: 1230; Source: Microsoft-Windows FailoverClustering;Task Category: Resource Control Manager
Any and all help will be appreciated!Hi AquilaXXIII,
What server edition you are using? If you are using 2012r2 as cluster node, please install Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
update first,
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://social.technet.microsoft.com/Forums/en-US/f9c1a5f7-4fcf-409a-8d7e-388b85512bfe/new-lun-takes-a-long-time-to-format-and-errors-out?forum=winserv
Before you install the new shared storage please first validation this storage first, you can refer the following KB to validation the new LUN.
Understanding Cluster Validation Tests: Storage
http://technet.microsoft.com/en-us/library/cc771259.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
MBP Taking a long time to boot up
Recently, My MBP started taking a long time to boot up starting at the Mac OS X boot screen and since it is set on auto login through the whole longin process(briging up the dock and finder windows) i've tried safe booting but it didnt make much of a difference what should I do?
Try creating a new user account and see if the boot/login process takes the same time with the new account.
-
MacBook Air 13" is taking a very long time to boot up
My daughter purchased a MacBook Air 13" last 1.7 GH Intel Core i5, 4GB Memory. A couple of weeks ago, my daughter noticed that her computer was taking a long time to boot up. Apparently the bootup time has progressively lengthened to 3 - 5 minutes to get to her desktop. What happens is the boot-up process seems to stall on a grey screen and beach-balls until the desktop eventually appears. Does anyone have any idea of what could be causing this issue? Any tips, tricks, suggestion would be helpful.
Thanks!!I would consider doing the following:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
Why outlook2011 mac version* takes long time to boot with OSX
why outlook2011 mac version* takes long time to boot with OSX
Okay, so after doing all of the above, the computer still takes between 40 seconds and 1 minute or so to boot up, and the VersionCue messages still appear. However I discovered that the "kdcmond cannot retrieve..." messages disappeared after I disabled my ethernet connections. So at least I know that that had nothing to do with the extended boot-up time.
I have heard that the more RAM you have, the longer it takes to boot due to the RAM count. Since I have 10 GB, maybe this is why?
I've included the most recent Console messages below:
22/4/08 9:56:16 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
22/4/08 9:56:16 AM com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
22/4/08 9:56:16 AM com.apple.launchd[1] (org.cups.cups-lpd) Unknown key: SHAuthorizationRight
22/4/08 9:56:16 AM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
22/4/08 9:56:16 AM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
22/4/08 9:56:39 AM com.apple.SystemStarter[28] Starting Aladdin USB daemon
22/4/08 9:56:39 AM org.ntp.ntpd[25] Error : nodename nor servname provided, or not known
22/4/08 9:56:39 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[74]) Exited: Terminated
22/4/08 9:56:39 AM com.apple.launchctl.Aqua[90] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
22/4/08 9:56:42 AM com.apple.launchd[82] (0x1011e0.VersionCueCS3monitor) Failed to check-in! -
Mid-2010 MacBook Pro taking a long time to boot up with Yosemite (Etrecheck results)
I'd be so grateful if anyone can help me get to the bottom of this. The MacBook's otherwise working just fine just takes quite a lot longer (2-3 mins) to boot up since installing Yosemite. Just tried upgrading the memory which has made the system run faster but doesn't seem to have remedied the boot up problem.
Thanks in advance.
Ed
EtreCheck version: 2.1.8 (121)
Report generated 4 February 2015 14:16:33 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 1646
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
Color LCD 1440 x 900
NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:52:28
Disk Information: ℹ️
Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (62.00 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.delantis.kext.tcpblocknke (2.2.6 - SDK 10.6) [Click for support]
[not loaded] com.mice.driver.Wireless360Controller (1.0.0d10) [Click for support]
[not loaded] com.mice.driver.WirelessGamingReceiver (1.0.0d10) [Click for support]
[not loaded] com.mice.driver.Xbox360Controller (1.0.0d10) [Click for support]
[not loaded] com.pctools.iantivirus.kfs (1.0.1) [Click for support]
[loaded] com.screenrecycler.driver.ScreenRecyclerDriver (1.4.13 - SDK 10.4) [Click for support]
[not loaded] com.wdc.driver.1394HP (1.0.8) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.10) [Click for support]
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.delantis.tcbblocknke_load_kext.plist [Click for support]
[loaded] com.delantis.TCPBlock.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
[failed] com.adobe.ARM.[...].plist [Click for support] [Click for details]
[loaded] com.divx.agent.postinstall.plist [Click for support]
[failed] com.google.Chrome.framework.plist [Click for support] [Click for details]
User Login Items: ℹ️
System Events Application (/System/Library/CoreServices/System Events.app)
Google Drive Application (/Applications/Google Drive.app)
Dropbox UNKNOWN (missing value)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.04 - SDK 10.6 [Click for support]
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
RealPlayer Plugin: Version: Unknown [Click for support]
QuakeLivePlugin: Version: 0.1.0.258 [Click for support]
DirectorShockwave: Version: 11.0.0r458 [Click for support]
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Click for support]
DivXBrowserPlugin: Version: 2.2 [Click for support]
OVSHelper: Version: 1.1 [Click for support]
Silverlight: Version: 5.1.30214.0 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.3.3.3 [Click for support]
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
JavaAppletPlugin: Version: Java 7 Update 75 Check version
OfficeLiveBrowserPlugin: Version: 12.2.0 [Click for support]
User internet Plug-ins: ℹ️
fbplugin_1_0_1: Version: Unknown [Click for support]
Safari Extensions: ℹ️
AdBlock
Ebay Shopping Assistant [Adware! - Remove]
Searchme [Adware! - Remove]
Amazon Shopping Assistant [Adware! - Remove]
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
DivX [Click for support]
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 437.25 GB
Destinations:
Data [Network]
Total size: 2.00 TB
Total number of backups: 3
Oldest backup: 2015-02-02 03:51:54 +0000
Last backup: 2015-02-03 16:31:57 +0000
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 499.25 GB X 3)
Top Processes by CPU: ℹ️
20% backupd
9% mds
4% WindowServer
1% diskimages-helper
0% mds_stores
Top Processes by Memory: ℹ️
576 MB mds_stores
215 MB Safari
103 MB Finder
103 MB Google Drive
77 MB WindowServer
Virtual Memory Information: ℹ️
3.64 GB Free RAM
3.19 GB Active RAM
539 MB Inactive RAM
1.21 GB Wired RAM
5.07 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 4, 2015, 01:21:57 PM Self test - passed
Feb 4, 2015, 11:27:59 AM /Library/Logs/DiagnosticReports/Google Drive_2015-02-04-112759_[redacted].crash
Feb 3, 2015, 04:29:10 PM /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-02-03-162910_[re dacted].crash
Feb 3, 2015, 04:29:00 PM /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-02-03-162900_[re dacted].crash
Feb 3, 2015, 04:28:49 PM /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-02-03-162849_[re dacted].crash
Feb 3, 2015, 04:28:38 PM /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-02-03-162838_[re dacted].crash
Feb 3, 2015, 04:28:28 PM /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-02-03-162828_[re dacted].crash
Feb 3, 2015, 04:28:27 PM /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-02-03-162827_[re dacted].crash
Feb 3, 2015, 12:42:55 PM /Library/Logs/DiagnosticReports/rpcsvchost_2015-02-03-124255_[redacted].cpu_res ource.diag [Click for details]
Feb 2, 2015, 06:07:43 PM /Library/Logs/DiagnosticReports/Adobe InDesign CC_2015-02-02-180743_[redacted].hang
Feb 2, 2015, 06:03:10 PM /Library/Logs/DiagnosticReports/Finder_2015-02-02-180310_[redacted].hang
Feb 2, 2015, 06:03:10 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-02-02-180310_[ redacted].hang
Feb 2, 2015, 12:11:23 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Finder_2015-02-02-121123_[reda cted].crash
Feb 2, 2015, 09:48:41 AM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-02-02-094841_[ redacted].cpu_resource.diag [Click for details]
Feb 2, 2015, 04:04:01 AM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-02-02-040401_[ redacted].cpu_resource.diag [Click for details]
Feb 1, 2015, 07:44:51 PM /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-02-01-194451_[re dacted].crash
Feb 1, 2015, 07:44:49 PM /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-02-01-194449_[re dacted].crash
Feb 1, 2015, 07:40:37 PM /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-02-01-194037_[re dacted].crash
Feb 1, 2015, 07:40:35 PM /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-02-01-194035_[re dacted].crash
Feb 1, 2015, 07:39:13 PM /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-02-01-193913_[re dacted].crash
Feb 1, 2015, 07:39:11 PM /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-02-01-193911_[re dacted].crash
Feb 1, 2015, 06:28:39 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-02-01-182839_[ redacted].cpu_resource.diag [Click for details]
Feb 1, 2015, 04:39:26 PM /Library/Logs/DiagnosticReports/Google Drive_2015-02-01-163926_[redacted].crash
Feb 1, 2015, 05:19:20 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-02-01-171920_[ redacted].cpu_resource.diag [Click for details]Try to do a factory reset. You can backup your disk and transfer tthe things later.
If lion hold down command-r during bootup
if mountain lion hold option during bootup and choose a network, it will restore -
Applying Software Installation Policy Is Taking Long Time During Boot Process
1 of my servers is having slow boot up issue. I have enabled user environment debugging and the gpsvc.log file has been generated. I have also used the Windows Performance Analyzer to capture logs and results came back that the GP Client is taking a long
time in the boot process. So, I reckoned the slow boot is due to GPO but I am not sure where to look from this log file.
I have only paste part of the gpsvc.log file here due to limitation in the number of characters allowed to be posted. Would appreciate some good advise on this issue that I am facing.
GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {FB2CA36D-0B40-4307-821B-A13B252DE56C}
GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {fbf687e6-f063-4d9f-9f4f-fd9a26acdd5f}
GPSVC(34c.408) 04:03:30:109 GetMachineToken: Looping for authentication again.
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Logging Data for Target <SW01E772>.
GPSVC(34c.408) 04:03:30:109 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
GPSVC(34c.408) 04:03:30:109 LockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:109 Sync Lock Called
GPSVC(34c.408) 04:03:30:109 Writer Lock got immediately.
GPSVC(34c.408) 04:03:30:109 Lock taken successfully
GPSVC(34c.408) 04:03:30:109 UnLockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:109 UnLockedsuccessfully
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: OpenThreadTokenfailed with error 1008, assuming thread is not impersonating
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Processing extension Registry
GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes and nosecurity group membership change and extension Registry has NoGPOChangesset.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Wireless Group Policy
GPSVC(34c.408) 04:03:30:125CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Wireless Group Policy's status or policy time.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Wireless Group Policy skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Environment
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Group Policy Environment's status or policy time.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Group Policy Environment skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Local Users and Groups
GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:156 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
GPSVC(34c.408) 04:03:30:156 LockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:156 Sync Lock Called
GPSVC(34c.408)04:03:30:156 Writer Lock got immediately.
GPSVC(34c.408) 04:03:30:156 Lock taken successfully
GPSVC(34c.408) 04:03:30:156 ProcessGPOList: Entering for extension Group Policy Local Users and Groups
GPSVC(34c.408) 04:03:30:156 MachinePolicyCallback: Settingstatus UI to Applying Group Policy Local Users and Groups policy...
GPSVC(34c.408) 04:03:30:156 ProcessGPOList: No changes. CSEwill not be passed in the IwbemServicesintfptr
GPSVC(34c.364)04:03:30:156 Message Status = <Applying Group Policy Local Users and Groups policy...>
GPSVC(34c.364) 04:03:30:156 Setting GPsessionstate = 1
GPSVC(34c.408) 04:03:31:796 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, dwStatus= 0x0
GPSVC(34c.408) 04:03:31:953 GetWbemServices: CoCreateInstancesucceeded
GPSVC(34c.408) 04:03:36:031 ConnectToNameSpace: ConnectServerreturned 0x0
GPSVC(34c.408) 04:03:36:140 ProcessGroupPolicyCompletedExInternal: Extension {17D89FEC-5C44-4972-B12D-241CAEF74509} was able to log data. Error = 0x0, dwRet= 0. Clearing the dirty bit
GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Local Users and Groups> at 44203 ticks (ms)
GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, Return status dwRet= 0x0
GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups returned 0x0.
GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups status was not updated because there was no changes and no transition or rsopwasn't enabled
GPSVC(34c.408) 04:03:36:500 UnLockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:36:500 UnLockedsuccessfully
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Device Settings
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Group Policy Device Settings'sstatus or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Group Policy Device Settings skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Folder Redirection
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Folder Redirection's status or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Folder Redirection skipped with flags 0x7.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Microsoft Disk Quota
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Microsoft Disk Quota's status or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Microsoft Disk Quota skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Network Options
GPSVC(34c.408) 04:03:36:531CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Options'sstatus or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Group Policy Network Options skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension QoSPacket Scheduler
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension QoSPacket Scheduler's status or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension QoSPacket Scheduler skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Scripts
GPSVC(34c.408) 04:03:36:546 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes and no security group membership change and extension Scripts has NoGPOChangesset.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Remote Desktop USB Redirection
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Remote Desktop USB Redirection's status or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Remote Desktop USB Redirection skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Internet Explorer Zonemapping
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Zonemapping'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Internet Explorer Zonemappingskipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Drive Maps
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Drive Maps'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Drive Maps skipped withflags 0x7.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processingextension Group Policy Folders
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folders'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Folders skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Network Shares
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Shares's status or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Network Shares skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Files
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't readextension Group Policy Files's status or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Files skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Data Sources
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs:No GPO changes but couldn't read extension Group Policy Data Sources's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Group Policy Data Sources skipped because bothdeleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Group Policy Ini Files
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Group Policy Ini Files's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension GroupPolicy Ini Files skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Internet Explorer User Accelerators
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't readextension Internet Explorer User Accelerators's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Internet Explorer User Accelerators skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Security
GPSVC(34c.408) 04:03:36:578ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes and no security group membership change and extension Security has NoGPOChanges set.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Deployed Printer Connections
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Deployed Printer Connections's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Deployed Printer Connections skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Services
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Services's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Services skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Internet Explorer Branding
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Branding's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Internet Explorer Branding skipped with flags 0x7.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group PolicyFolder Options
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folder Options's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Folder Options skipped because bothdeleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Scheduled Tasks
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Scheduled Tasks's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Scheduled Tasks skipped because both deletedand changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Registry
GPSVC(34c.408) 04:03:36:593 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:625 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
GPSVC(34c.408)04:03:36:625 LockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:625 Sync Lock Called
GPSVC(34c.408) 04:03:36:625 Writer Lock got immediately.
GPSVC(34c.408) 04:03:36:625 Locktaken successfully
GPSVC(34c.408) 04:03:36:625 ProcessGPOList: Entering for extension Group Policy Registry
GPSVC(34c.408) 04:03:36:625 MachinePolicyCallback: Setting status UI to Applying Group Policy Registry policy...
GPSVC(34c.408) 04:03:36:625 ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(34c.364) 04:03:36:625 Setting GPsession state =1
GPSVC(34c.408) 04:03:36:765 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, dwStatus = 0x0
GPSVC(34c.408) 04:03:36:796 GetWbemServices: CoCreateInstance succeeded
GPSVC(34c.408) 04:03:36:812 ConnectToNameSpace: ConnectServer returned 0x0
GPSVC(34c.408) 04:03:36:812 ProcessGroupPolicyCompletedExInternal: Extension {B087BE9D-ED37-454F-AF9C-04291E351182} was able to log data. Error = 0x0, dwRet = 0. Clearing the dirty bit
GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Registry> at 44546 ticks (ms)
GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, Return status dwRet = 0x0
GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry returned 0x0.
GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry status was not updated because there was no changes and no transition or rsop wasn'tenabled
GPSVC(34c.408) 04:03:36:843 UnLockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:843 UnLocked successfully
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension 802.3 Group Policy
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension 802.3 Group Policy's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension 802.3 Group Policy skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Printers
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Printers's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Printers skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Shortcuts
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Shortcuts's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Shortcuts skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:890 ProcessGPOs: Processing extension Software Installation
GPSVC(34c.408) 04:03:36:890 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:890 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:890 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
GPSVC(34c.408) 04:03:36:890 LockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:890 Sync Lock Called
GPSVC(34c.408) 04:03:36:890 Writer Lock got immediately.
GPSVC(34c.408) 04:03:36:890 Lock taken successfully
GPSVC(34c.408) 04:03:36:890 ProcessGPOList: Entering for extension Software Installation
GPSVC(34c.408) 04:03:36:890 MachinePolicyCallback: Setting status UI to Applying Software Installation policy...
GPSVC(34c.408) 04:03:36:890ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(34c.364) 04:03:36:890 Message Status = <Applying Software Installation policy...>
GPSVC(34c.364) 04:03:36:890 Setting GPsession state = 1
GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation returned 0x0.
GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation status was not updated because there was no changes and no transition or rsop wasn't enabled
GPSVC(34c.408) 04:03:37:312UnLockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:37:312 UnLocked successfully
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension TCPIP
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension TCPIP's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension TCPIP skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Internet Explorer Machine Accelerators
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Machine Accelerators's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension Internet Explorer Machine Accelerators skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension IP Security
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension IP Security's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension IP Security skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Group Policy Internet Settings
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Internet Settings's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Internet Settings skipped with flags 0x7.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Start Menu Settings
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Start Menu Settings's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Start Menu Settings skipped because both deleted and changed GPO listsare empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processingextension Group Policy Regional Options
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extensionGroup Policy Regional Options's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy RegionalOptions skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Power Options
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Power Options's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Power Options skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Audit Policy Configuration
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Audit Policy Configuration's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Audit Policy Configuration skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Applications
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Group Policy Applications's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Group Policy Applications skipped with flags 0x7.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extension Enterprise QoS
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Enterprise QoS's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Enterprise QoS skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extensionCP
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension CP's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension CP skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:359 gpGetFgPolicyRefreshInfo: Mode: 1, Reason: 7
GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Previous Machine Fg policy Synchronous, Reason: SKU.
GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Next Machine Fg policy Synchronous, Reason: SKU.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: No WMI logging done in this policy cycle.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Boot/Logon Policy processing - checking if UBPM trigger events need to be fired
GPSVC(34c.408) 04:03:37:375 CheckAndFireGPTriggerEvent: FiredPolicy present UBPM trigger event for Machine.
GPSVC(34c.408) 04:03:37:375 Application complete with bConnectivityFailure = 0.
GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xc8c
GPSVC(34c.79c) 04:03:40:546 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3a0) 04:03:40:546 Target = Machine
GPSVC(34c.79c) 04:03:40:546 Client_RegisterForNotification: User =machine, changenumber = 0
GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Entering withtarget Machine and event 0x1ac
GPSVC(3bc.ac8) 04:03:59:296 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.748) 04:03:59:296 Target = Machine
GPSVC(3bc.ac8) 04:03:59:296 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.748) 04:03:59:343 Target = Machine
GPSVC(34c.748) 04:03:59:343 Target = Machine,ChangeNumber 0
GPSVC(34c.3ac) 04:03:59:515 Target = Machine
GPSVC(34c.3ac) 04:03:59:531 Target = Machine, ChangeNumber 0
GPSVC(34c.3ac) 04:03:59:531 Sid = (null), dwTimeout = 600000, dwFlags = 268435456
GPSVC(34c.3ac) 04:03:59:531 LockPolicySection calledfor user <Machine>
GPSVC(34c.3ac) 04:03:59:546 Async Lock called
GPSVC(34c.3ac) 04:03:59:546 Reader Lock got immediately. m_cReadersInLock : 1
GPSVC(34c.3ac) 04:03:59:546 Sid = (null)
GPSVC(34c.3ac) 04:03:59:546 UnLockPolicySection called for user <Machine>
GPSVC(34c.3ac) 04:03:59:546 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(34c.3ac) 04:03:59:546 Settinglock state as notLocked
GPSVC(34c.3ac) 04:03:59:546 UnLocked successfully
GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xd04
GPSVC(34c.bdc) 04:04:00:000 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:04:00:000 Target =Machine
GPSVC(34c.bdc) 04:04:00:000 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.3ac) 04:04:00:000 Target = Machine, ChangeNumber 0
GPSVC(34c.748) 04:04:01:140 Target = Machine
GPSVC(34c.748) 04:04:01:140 Target = Machine, ChangeNumber 0
GPSVC(154.41c) 04:05:25:509CGPNotify::RegisterForNotification: Entering with target Machine and event 0x458
GPSVC(154.41c) 04:05:25:509 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:509 Target = Machine
GPSVC(154.41c) 04:05:25:525 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:525 Target = Machine, ChangeNumber 0
GPSVC(154.41c) 04:05:25:525 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(154.41c) 04:05:25:759 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x4e8
GPSVC(154.41c) 04:05:25:759 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:759 Target = Machine
GPSVC(154.41c) 04:05:25:775 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(154.41c) 04:05:25:775 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.3ac) 04:05:25:775 Target = Machine, ChangeNumber 0
GPSVC(34c.3ac) 04:05:59:217 Target = Machine
GPSVC(34c.3ac)04:05:59:233 Target = Machine, ChangeNumber 0
GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::UnregisterNotification: Entering with event 0x1ac
GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(3bc.3cc) 04:05:59:405 CGPNotify::UnregisterNotification: Canceling pending calls
GPSVC(3bc.3cc) 04:05:59:420 Client_CompleteNotificationCall: failed with 0x4c7
GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Cancelled pending calls
GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(34c.360) 04:06:00:827 Target = Machine
GPSVC(34c.360) 04:06:00:827 Target = Machine, ChangeNumber 0
GPSVC(34c.360) 04:06:01:155 Target = Machine
GPSVC(34c.360) 04:06:01:171 Target = Machine, ChangeNumber 0
GPSVC(34c.fe8) 04:06:02:124 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x218
GPSVC(34c.fe8) 04:06:02:140 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.360) 04:06:02:155 Target = Machine
GPSVC(34c.fe8) 04:06:02:155 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.fe8) 04:06:02:171 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.da4) 05:06:16:856 Target = Machine
GPSVC(34c.da4) 05:06:16:856 Target = Machine, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20
GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:856 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:856 Target = S-1-5-20
GPSVC(34c.de8) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:872 Callerrequesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.de8) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:872 Caller requesting for usernotification/lock is from session 0
GPSVC(34c.da4) 05:06:16:872Target = S-1-5-20
GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20
GPSVC(34c.de8) 05:06:16:887 Could notfind user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.de8) 05:06:16:887 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:26:981 Setting GPsession state = 1
GPSVC(34c.de8) 05:06:32:341 SID = S-1-5-21-206128196-3657029889-627342018-7757
GPSVC(34c.de8) 05:06:32:356 bMachine = 0
GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
GPSVC(34c.de8) 05:06:32:356 Message Status = <Applying user settings...>
GPSVC(34c.778) 05:06:32:356 StartTime For network wait: 32140ms
GPSVC(34c.778) 05:06:32:356 Current Time: 3819953ms
GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
GPSVC(34c.778) 05:06:32:356 MaxTimeToWaitForNetwork: 5212ms
GPSVC(34c.778) 05:06:32:356 TimeRemainingToWaitForNetwork: 0ms
GPSVC(34c.778) 05:06:32:356 UserPolicy: Waiting for machine policy wait for network event with timeout 0 ms
GPSVC(34c.778) 05:06:32:388 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 65538
GPSVC(34c.778) 05:06:32:388 LockPolicySection called for user <Machine>Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support -
Taking too long time for booting
Hi there,
I just bought myself an iphone 5s. . Try to get up started for the 1st time but the thing keep booting or loading too long time for endless hours. What may go wrong? Appreciate if you could help me on this.But payment run before due date. you are not run before due date once check it
-
OVM Server takes long time to boot up - gets stuck for minutes after joining domain
Server takes a long time to reboot. Seems to get stuck for 8-10 minutes every time after joining domain.
See below extract from /var/log/messages:-
Feb 1 16:39:49 svrshir441 kernel: OCFS2 1.8.0
Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000E5144BF336A244A4 ( 0 1 2 ) 3 nodes
Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,4) on (node 1, slot 2) with ordered data mode.
Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB00000500000328DE591E03F0DB ( 0 1 2 ) 3 nodes
Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,2) on (node 1, slot 2) with ordered data mode.
Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB000005000024F2772BB88DAA6A ( 0 1 2 ) 3 nodes
Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,5) on (node 1, slot 2) with ordered data mode.
Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000B8721C8850D2C515 ( 0 1 2 ) 3 nodes
Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,1) on (node 1, slot 2) with ordered data mode.
Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000EE77A2D3C8C7383B ( 0 1 2 ) 3 nodes
Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,0) on (node 1, slot 2) with ordered data mode.
Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000B96BA1B4B79D765E ( 0 1 2 ) 3 nodes
Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,3) on (node 1, slot 2) with ordered data mode.
Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain ovm ( 0 1 2 ) 3 nodes
Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_BRM_status_show: BRM attribute is only forwarpdrive
Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_host_trace_buffer_show: host_trace_buffer is not registered
Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_host_trace_buffer_size_show: host_trace_buffer is not registered
Feb 1 16:47:22 svrshir441 kernel: qla2xxx [0000:30:00.0]-1020:7: **** Failed mbx[0]=4006
No idea why it seems to pause for 8 minutes.[2015-02-01 16:38:23 9555] DEBUG (ocfs2:162) cluster debug: {'/sys/kernel/debug/o2dlm': [], '/sys/kernel/debug/o2net': ['connected_n
odes', 'stats', 'sock_containers', 'send_tracking'], '/sys/kernel/debug/o2hb': ['0004FB0000050000E5144BF336A244A4', 'failed_regions'
, 'quorum_regions', 'live_regions', 'livenodes'], 'service o2cb status': 'Driver for "configfs": Loaded\nFilesystem "configfs": Moun
ted\nStack glue driver: Loaded\nStack plugin "o2cb": Loaded\nDriver for "ocfs2_dlmfs": Loaded\nFilesystem "ocfs2_dlmfs": Mounted\nCh
ecking O2CB cluster "8cd10008859eaf59": Online\n Heartbeat dead threshold: 61\n Network idle timeout: 60000\n Network keepalive d
elay: 2000\n Network reconnect delay: 2000\n Heartbeat mode: Global\nChecking O2CB heartbeat: Active\n 0004FB0000050000E5144BF336
A244A4 /dev/dm-4\nNodes in O2CB cluster: 0 1 2 \n'}
[2015-02-01 16:38:23 9555] DEBUG (ocfs2:162) cluster debug: {'/sys/kernel/debug/o2dlm': [], '/sys/kernel/debug/o2net': ['connected_n
odes', 'stats', 'sock_containers', 'send_tracking'], '/sys/kernel/debug/o2hb': ['0004FB0000050000E5144BF336A244A4', 'failed_regions'
, 'quorum_regions', 'live_regions', 'livenodes'], 'service o2cb status': 'Driver for "configfs": Loaded\nFilesystem "configfs": Moun
ted\nStack glue driver: Loaded\nStack plugin "o2cb": Loaded\nDriver for "ocfs2_dlmfs": Loaded\nFilesystem "ocfs2_dlmfs": Mounted\nCh
ecking O2CB cluster "8cd10008859eaf59": Online\n Heartbeat dead threshold: 61\n Network idle timeout: 60000\n Network keepalive d
elay: 2000\n Network reconnect delay: 2000\n Heartbeat mode: Global\nChecking O2CB heartbeat: Active\n 0004FB0000050000E5144BF336
A244A4 /dev/dm-4\nNodes in O2CB cluster: 0 1 2 \n'}
[2015-02-01 16:38:23 9555] DEBUG (ocfs2:270) Trying to mount /dev/mapper/360080e500036115200000b315294458d to /poolfsmnt/0004fb00000
50000e5144bf336a244a4
[2015-02-01 16:38:23 9555] DEBUG (ocfs2:295) /dev/mapper/360080e500036115200000b315294458d mounted to /poolfsmnt/0004fb0000050000e51
44bf336a244a4
[2015-02-01 16:38:24 10441] INFO (notificationserver:213) NOTIFICATION SERVER STARTED
[2015-02-01 16:38:24 10443] INFO (remaster:140) REMASTER SERVER STARTED
[2015-02-01 16:38:24 10444] INFO (monitor:23) MONITOR SERVER STARTED
[2015-02-01 16:38:24 10447] INFO (ha:89) HA SERVER STARTED
[2015-02-01 16:38:24 10448] INFO (stats:26) STAT SERVER STARTED
[2015-02-01 16:38:24 10451] INFO (xmlrpc:307) Oracle VM Agent XMLRPC Server started.
[2015-02-01 16:38:24 10451] INFO (xmlrpc:316) Oracle VM Server version: {'release': '3.2.8', 'date': '201404161506', 'build': '736'}
, hostname: svrshir441, ip: 10.90.17.41
[2015-02-01 16:38:24 10441] DEBUG (notificationserver:237) Trying to connect to manager.
[2015-02-01 16:38:24 10441] DEBUG (notificationserver:239) Connected to manager.
[2015-02-01 16:38:25 10441] INFO (notificationserver:267) Service started.
[2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdb-7:0:0:0 (unde
f:0x20470080e5361152:360080e500036115200000b315294458d)
[2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdh-9:0:0:0 (acti
ve:0x20460080e5361152:360080e500036115200000b315294458d)
[2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdd-7:0:0:2 (unde
f:0x20470080e5361152:360080e500036115200000b36529447cb)
[2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdj-9:0:0:2 (acti
ve:0x20460080e5361152:360080e500036115200000b36529447cb)
[2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdf-7:0:0:4 (unde
f:0x20470080e5361152:360080e500036115200000b39529448ba)
[2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdl-9:0:0:4 (acti
ve:0x20460080e5361152:360080e500036115200000b39529448ba)
[2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdc-7:0:0:1 (acti
ve:0x20470080e5361152:360080e500037683a00000b1652944694)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdi-9:0:0:1 (unde
f:0x20460080e5361152:360080e500037683a00000b1652944694)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sde-7:0:0:3 (acti
ve:0x20470080e5361152:360080e500037683a00000b18529448bf)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdk-9:0:0:3 (unde
f:0x20460080e5361152:360080e500037683a00000b18529448bf)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdg-7:0:0:5 (acti
ve:0x20470080e5361152:360080e500037683a00000b1a529449ac)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdm-9:0:0:5 (unde
f:0x20460080e5361152:360080e500037683a00000b1a529449ac)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_DM] dm-5 (360080e5000
36115200000b39529448ba)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_DM] dm-1 (360080e5000
36115200000b36529447cb)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_DM] dm-0 (360080e5000
37683a00000b1652944694)
[2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_DM] dm-2 (360080e5000
37683a00000b18529448bf)
[2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_DM] dm-3 (360080e5000
37683a00000b1a529449ac)
[2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_DM] dm-4 (360080e5000
36115200000b315294458d)
[2015-02-01 16:38:29 10444] DEBUG (monitor:36) Cluster state changed from [Unknown] to [DLM_Ready]
[2015-02-01 16:38:29 10444] INFO (notification:47) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Unknown] to [D
LM_Ready]
[2015-02-01 16:38:29 10441] INFO (notificationserver:139) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Unkn
own] to [DLM_Ready]
[2015-02-01 16:38:33 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:33 {NETWORK} net : ADD : eth4 (1)
[2015-02-01 16:38:36 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:36 {NETWORK} net : ADD : eth5 (1)
[2015-02-01 16:38:39 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:39 {NETWORK} net : ADD : eth6 (0)
[2015-02-01 16:38:42 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:42 {NETWORK} net : ADD : eth7 (1)
[2015-02-01 16:38:45 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:45 {NETWORK} net : ADD : eth0 (1)
[2015-02-01 16:38:48 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:48 {NETWORK} net : ADD : eth1 (1)
[2015-02-01 16:38:51 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:51 {NETWORK} net : ADD : eth2 (0)
[2015-02-01 16:38:54 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:54 {NETWORK} net : ADD : eth3 (1)
[2015-02-01 16:38:57 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:57 {NETWORK} net : ADD : bond0 (1)
[2015-02-01 16:39:00 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:39:00 {NETWORK} net : ADD : bond1 (1)
[2015-02-01 16:39:03 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:39:03 {NETWORK} net : ADD : bond1.590 (1)
[2015-02-01 16:39:06 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:39:06 {NETWORK} net : ADD : bond1.90 (1)
[2015-02-01 16:40:56 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) None&c=8&s=
1422808694292&lb=p&t=2&p=%3Ccom.oracle.odof.OdofIdentifier%3E%3Clong%3E943%3C%2Flong%3E%3C%2Fcom.oracle.odof.OdofIdentifier%3E%2Ccom
pareTo%2Cjava.lang.Object%2CNone%2C5'
[2015-02-01 16:41:05 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
[2015-02-01 16:41:26 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
[2015-02-01 16:41:47 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
[2015-02-01 16:42:05 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
[2015-02-01 16:42:26 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
[2015-02-01 16:42:26 10441] INFO (notificationserver:276) Service stopped.
[2015-02-01 16:42:26 10441] DEBUG (notificationserver:237) Trying to connect to manager.
[2015-02-01 16:42:29 10441] ERROR (notificationserver:244) Error initializing notification server: 'Invalid URL Request (send) https
://10.90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1
767abc'
[2015-02-01 16:42:45 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
[2015-02-01 16:42:59 10441] DEBUG (notificationserver:237) Trying to connect to manager.
[2015-02-01 16:43:05 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
[2015-02-01 16:43:25 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
[2015-02-01 16:43:32 10441] DEBUG (notificationserver:237) Trying to connect to manager.
[2015-02-01 16:43:45 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
[2015-02-01 16:44:02 10441] DEBUG (notificationserver:237) Trying to connect to manager.
[2015-02-01 16:44:05 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
[2015-02-01 16:44:25 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
[2015-02-01 16:44:32 10441] DEBUG (notificationserver:237) Trying to connect to manager.
[2015-02-01 16:44:46 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
[2015-02-01 16:44:53 11242] DEBUG (service:76) call start: discover_server
[2015-02-01 16:44:54 11242] DEBUG (service:76) call complete: discover_server
[2015-02-01 16:45:02 10441] DEBUG (notificationserver:237) Trying to connect to manager.
[2015-02-01 16:45:02 10441] DEBUG (notificationserver:239) Connected to manager.
[2015-02-01 16:45:03 10441] INFO (notificationserver:267) Service started.
[2015-02-01 16:47:22 11455] DEBUG (service:76) call start: get_api_version
[2015-02-01 16:47:22 11455] DEBUG (service:76) call complete: get_api_version
[2015-02-01 16:47:22 11456] DEBUG (service:76) call start: discover_server
[2015-02-01 16:47:22 11456] DEBUG (service:76) call complete: discover_server
[2015-02-01 16:47:22 11470] DEBUG (service:76) call start: discover_hardware
[2015-02-01 16:47:23 11470] DEBUG (service:76) call complete: discover_hardware
[2015-02-01 16:47:23 11497] DEBUG (service:76) call start: discover_network
[2015-02-01 16:47:23 11497] DEBUG (service:76) call complete: discover_network
[2015-02-01 16:47:24 11498] DEBUG (service:76) call start: discover_storage_plugins
[2015-02-01 16:47:24 11498] DEBUG (service:76) call complete: discover_storage_plugins
[2015-02-01 16:47:24 11501] DEBUG (service:74) call start: discover_physical_luns('',)
[2015-02-01 16:47:25 11501] DEBUG (service:76) call complete: discover_physical_luns
[2015-02-01 16:47:25 11523] DEBUG (service:74) call start: discover_physical_luns('360080e500036115200000b315294458d 360080e50003611
5200000b36529447cb 360080e500037683a00000b1652944694 360080e500036115200000b39529448ba 360080e500037683a00000b18529448bf 360080e5000
36115200000b315294458d 360080e500037683a00000b1a529449ac 360080e500036115200000b36529447cb 360080e500037683a00000b1652944694 360080e
500036115200000b39529448ba 360080e500037683a00000b18529448bf 360080e500037683a00000b1a529449ac',)
[2015-02-01 16:47:25 11523] DEBUG (service:76) call complete: discover_physical_luns
[2015-02-01 16:47:26 11545] DEBUG (service:76) call start: discover_repository_db
[2015-02-01 16:47:26 11545] DEBUG (service:76) call complete: discover_repository_db
[2015-02-01 16:47:26 11546] DEBUG (service:74) call start: storage_plugin_listMountPoints('oracle.ocfs2.OCFS2.OCFS2Plugin', {'status
': '', 'admin_user': '', 'admin_host': '', 'uuid': '0004fb000009000090ee9ab5a5966c67', 'total_sz': 0, 'admin_passwd': '******', 'fre
e_sz': 0, 'name': '0004fb000009000090ee9ab5a5966c67', 'access_host': '', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': []
, 'used_sz': 0, 'storage_desc': ''})
[2015-02-01 16:47:26 11546] INFO (storageplugin:109) storage_plugin_listMountPoints(oracle.ocfs2.OCFS2.OCFS2Plugin)
[2015-02-01 16:47:27 11546] DEBUG (service:76) call complete: storage_plugin_listMountPoints
[2015-02-01 16:47:27 11573] DEBUG (service:76) call start: get_yum_config
[2015-02-01 16:47:27 11573] DEBUG (service:76) call complete: get_yum_config
[2015-02-01 16:47:27 11574] DEBUG (service:76) call start: discover_cluster
[2015-02-01 16:47:27 11574] DEBUG (service:76) call complete: discover_cluster
[2015-02-01 16:48:53 11703] DEBUG (service:76) call start: discover_network
[2015-02-01 16:48:53 11703] DEBUG (service:76) call complete: discover_network
[2015-02-01 16:48:53 11704] DEBUG (service:74) async call start: start_vm('0004fb00000300001e5b01d4a4cb6426', '0004fb0000060000eff93
af0676e8c83')
[2015-02-01 16:48:53 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-eff9-3af0676e8c83 {START
[2015-02-01 16:48:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-eff9-3af0676e8c83 {VNC}
5900
[2015-02-01 16:48:54 11706] DEBUG (base:269) async call complete: func: start_vm pid: 11706 status: 0 output:
[2015-02-01 16:48:54 11706] INFO (notification:47) Notification sent: {ASYNC_PROC} exit PID 11706
[2015-02-01 16:48:54 10441] INFO (notificationserver:139) Sending notification: {ASYNC_PROC} exit PID 11706
[2015-02-01 16:48:55 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000eff93af0676e8c83 {SSLVNC} 6
900
[2015-02-01 16:48:55 11958] DEBUG (service:74) call start: configure_vm_ha('0004fb00000300001e5b01d4a4cb6426', '0004fb0000060000eff9
3af0676e8c83', True)
[2015-02-01 16:48:56 11958] DEBUG (service:76) call complete: configure_vm_ha
[2015-02-01 16:48:56 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000eff93af0676e8c83 {SSLTTY} 7
900
[2015-02-01 16:50:01 12075] DEBUG (service:76) call start: discover_network
[2015-02-01 16:50:01 12075] DEBUG (service:76) call complete: discover_network
[2015-02-01 16:50:01 12076] DEBUG (service:74) async call start: start_vm('0004fb0000030000ba5b6d02faa88c44', '0004fb0000060000fd7d7
ad27e9d7b63')
[2015-02-01 16:50:02 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {START
[2015-02-01 16:50:02 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VNC}
5901
[2015-02-01 16:50:02 12078] DEBUG (base:269) async call complete: func: start_vm pid: 12078 status: 0 output:
[2015-02-01 16:50:02 12078] INFO (notification:47) Notification sent: {ASYNC_PROC} exit PID 12078
[2015-02-01 16:50:03 10441] INFO (notificationserver:139) Sending notification: {ASYNC_PROC} exit PID 12078
[2015-02-01 16:50:03 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000fd7d7ad27e9d7b63 {SSLVNC} 6
901
[2015-02-01 16:50:04 12516] DEBUG (service:74) call start: configure_vm_ha('0004fb0000030000ba5b6d02faa88c44', '0004fb0000060000fd7d
7ad27e9d7b63', True)
[2015-02-01 16:50:04 12516] DEBUG (service:76) call complete: configure_vm_ha
[2015-02-01 16:50:04 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000fd7d7ad27e9d7b63 {SSLTTY} 7
902
[2015-02-01 16:50:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VMAPI
} VMAPIEvent {"VMAPIEvent":{"severity":5,"subsystem":"OVMSvcSS","process":"OVMSvc","type":"system","payload":{"type":"alive","alive"
:{"hostname":"GIS-DB-SVR1","domainName":"gloscc.gov.uk","osType":"Windows","osVersion":"Windows Server 2008 R2 Service Pack 1","kern
elVersion":"6.1.7601.18700","arch":"AMD64","guestType":"PVHVM","guestDriverVersion":"3.2.2.0","vmapiVersion":"100"}}}}
[2015-02-01 16:50:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VMAPI
} VMAPIEvent {"VMAPIEvent":{"severity":5,"subsystem":"OVMSvcSS","process":"OVMSvc","type":"system","payload":{"type":"IPChange","IPC
hange":{"intrface":"Oracle VM Virtual Ethernet Adapter","mac":"0021f6000001","ipv4info":{"ipinfo":[{"address":"10.90.0.66","netmask"
:"255.255.255.0","gateway":"","mtu":1500,"speed":1000000000}]},"ipv6info":{"ipinfo":[{"address":"fe80::993f:d5f4:599d:fa4%14","netma
sk":"255.255.255.0","gateway":"","mtu":1500,"speed":1000000000}]}}}}} -
IMac taking long time to boot after new hard drive installed. Help?
I recently had a new hard drive installed on my iMac (running Snow Leopard). After the intall all was well, but I couldn't get my screensaver to work. Erroneously thinking it was missing, I reinstalled it and ended up with two screen saver folders in the system files. Now when I turn on the Mac, I get a white screen for several seconds (close to a minute) before the system shows me the Apple logo and then boots. I'm concerned about this. Did my copying the screen saver cause the problem? Should I reinstall my system software? I was planning to upgrade to Mountain Lion anyway. Will that fix the problem? Any suggestions appreciated.
Restart in Safe Boot Mode (hold the left Shift key as soon as you restart your computer and hold it until the Apple logo appears). Once it gets to the desktop you can restart normally. Safe Mode serves a number of purposes and one of them is to delete/trim temporary files that might be causing boot problems. There's no guarantee this will improve your startup time but it will do no harm and I have seen computers restart more quickly after a Safe Boot.
-
Tiger refuses to install after a long time...
I need to install Tiger in a new second hard disk. I have a main disk (that was mounted some years ago with this same Tiger disk and version, 10.4) and later use the new disk as the main one
But disk instalation ask me to restart and this is repeated all the time. I disconnected the old hard disk but G5 just shows in the screen an alternating view of a question mark and a picture of something like a little head folder.
I am trying to absolve the disk install of this problem and think that some firware or related thing is the culprit.
Thank you.
G5 Mac OS X (10.4.10) Enough memoryI had the same problem. Slept fine with 10.3.9 and somewhere along the Tiger chain of updates it refused to sleep or would wake from sleep almost immediately.
After a ton of research and trying different things, here's what I've found. I should mention the Quicksilver has a dual processor upgrade, a usb 2 card, an M-Audio sound card (junk) and a fw 800 card. So, there's lot's to go wrong.
Apple's sleep is a mild sleep. To get it to sleep you have to execute a command to have it "safe sleep". Your G4 will likely need to be configured to "safe sleep". Go here http://www.jackoverfull.altervista.org/applicazioni/suspendnow/index-en.html All the scripts are there to configure and a script to run. Read the instructions in the read-me file. They are well written, succinct and simple. I keep a shortcut to SuspendNow! on the task bar. When I leave the computer I double click it, press enter and voila, sleep.
Don't be tempted to place the app in Utilities, it needs to be in Applications.
Another approach is NMS Sleep Assist. http://slicedapple.ath.cx/nmsutility.html The instructions are poor. I tried to get this to work under the many approachs available in the program and finally ended up using "Dependent Mode" (not ESI), setting up appropriate sleep holds and setting Apple's sleep to "never". Dependent mode replaces Apple's sleep and it works for me.
I run both SuspendNow! and NMS. I need NMS if I'm downloading and want to walk away. After the download's complete, plus my 5 minute time setting, the G4 sleeps.
There's a ton of sleep apps and widgets out there. I can honestly say I tried them all and these are the only two that worked for me. Chasing hardware issues is a waste of time. -
Z30 New Handset is taking long time for first boot
hold power button down for 30 seconds to reboot it
Hi, I purchased Z30 handset yesterday and tried switching it ON. It has taken 15hrs for booting and still showing 99%.Is this issue related to my handset particularly or BB10 related?
-
How long is an 'abnormally long' time to boot after 10.4.8 update?
How long is too long to wait for my macBook Pro to take to boot up after installing the latest update?
An hour?
2 hours?
A day?
I installed from Automatic Updates and shutdown rather than restart. Came abck hours later turned on powerer and waited and waited. After about an hour I tunred it off booted from the install CD, ran the disk utility, fixed a few permission and rebooted...
Should I take it in to the Apple Store tomorrow morning if this continues or reinstall the OS and start over?Hello dn:
As an aside, comparing Windows to OS X is like
comparing a plow horse ready for the glue factory to
a thoroughbred race horse. I use both every day and
have for years, so I have vivid daily comparisons.
Now then, as I indicated above, you probably caused
the problem by interrupting the software update
process. At a guess, you have clobbered directories
(you, not Apple). The first step would be to run
repair disk from your software install DVD (boot it,
holding down the "C" key). Repair disk is found in
the disk utility. If that works, you should be back
to the point where you can reinstall the combo
updater. There is also an excellent third party
program (mentioned above) called DiskWarrior (pricey
at about $90, but worth it if it saves the day).
If none of that works, you probably should do an
archive and install:
http://docs.info.apple.com/article.html?artnum=107120
A good back up/retreat strategy is just good
computing practice whether or not you are a computing
professional. There are several approaches. I make
bootable clones of all my iMacs on an external
firewire drive using a little program called
SuperDuper (&28 at www.shirt-pocket.com). The
bootable clone gives me almost complete protection
against hardware or software problems.
By the by, these forums are user-to-user. Everyone
is a volunteer - not an Apple employee. Apple
monitors/moderates the forums and provides an
excellent resource. If you are new to Macs (as your
post seems to indicate), you should spend some time
browsing the forums and using the tools available -
including the excellent library of knowledge base
articles.
Barry
OK, So I'm a cry baby.
But I do not buy your argument that it was all my fault. After I inrterupted the hour ling gray screen and ran and fixed a few previlige problems and tried again over 2 hour went by with nothing but the gray screen.
Archive and intall did get me back and running, but by now 4 -5 hours of my life are gone that I want back!
And the tone on this whole board seems to be we MacBook owners, who unsupectingly trusted Apple and let the Automaitic Software Update have its way with a computer that was functioning just fine, the result of which is a computer that needs to have the OS reinstalled, are at fault for having poor prior knowledge?
I bring up Microsoft because they are BAD. They have an OS that allows 3rd parties to install code to render your computer useless at best, a robot of evil at worst.
Yet here we have the Apple, a trusted known entity and the manufacture of not only the hardware but the OS handing us an install that should have just WORKED.
So al I can think is the Delta install is the culprit, since I had previously been on 10.4.7 and the Archive & Install put in 10.4.6. The Combined installer is ok.
Again MacBook owners are victimized for keeping current?
Some one at Apple deserves a dummy slap at least.
MacBook owners represent the "Switchers". They bought on style and a promis of stability and reliability. Not the allure of becoming UNIX Geeks or even Uber User or browsers of forums. They came from that dull gray world out there where viruse roam but if you let automatic updates run and loaded up with antiv virus and spyware scanners, things pretty much worked.
I'm not new to mac as I have been usinge them since I shelled out $3,500 for a Mac SE. (Don't laugh). I gave up however being a Uber User and I at least am tenaciouse enought to find this discussion board. I suspect there are going to be a lot of busy Mac "Geniouses" for the next few days as ordinary computer users stream in with MacBooks with gray screens.
You know Sony support totally *****, but they are rated the best on the PC side for customer satisfaction. Why? You almost never have to seek support from Sony.
Again I'm just ******** 'casue it happend to me on a new laptop that was bone stock. Its working now so problem solved. -
Sysprep Image takes a long time to boot
I am using POSReady 7 and using sysprep, now everything works fine as it should but takes over an hour from powerup till it boots into Windows for the first time. Now I know in my unattend.xml I am using the reinstall all devices option but Windows
is running its setup and I can see that working but once it is done and reboots, it comes up to a black screen with the mouse in the corner and sits at the screen for 30 min. Then it boots into Windows and all is well. My xml has little config in it
why does it sit at this screen for so long?Intel Celeron G540 2.5Ghz
4Gb
I typically install it via USB using Imagex through Winpe to the Drive which takes roughly 15min
But the Initial Windows boot takes over an hour
The 2 model Registers im using are NCR 80 and 82 xrt
Maybe you are looking for
-
Update price conditions in massive way
Hi Gurus, I defined a Rappel agreement with transaction VK11. Now i am needing to update this agreement for all customers so i would like to know if its possible to update at massive way instead of one per one. The field "Customer" is a mandatory fie
-
Whenever I try to access links in Flash Builder such as those on the Start Page, Device Connection Help in Run Configurations or even Find and Download other versions of Flex SDK in the Flex Configuration window it opens up a blank Notepad window wit
-
Video ok on TV, but photo impossible on TV
I have connected my ipod 80 on TV; it's ok to see video on tv, but I can't see photography from ipod on the tv. con you help me ?
-
HT5654 I have old 3G I pad I can't update from ISP 5 to ISP 7 how
When I try update from iso5 there is no update throught iTunes or throught setting show me there is no update what I do
-
Errors loading .m4v into iBook author?
Anyone getting errors loading .m4v into iBook author? I have been supplied .m4v files to insert into my document and an error pops up ...