New install with codec issues
Hello,
I recently purchased the entire Creative Cloud suite of applications including Adobe Premiere. Everything works correctly however many of the professional level codecs are missing from the aps, ie. XDcam, RED, etc.. It's not possible to generate the sequences, import files, or open CS6 projects that utilize XDcam. This is a huge problem because our workflow relies on XD footage. It's as if the programs are stuck in a trail mode and will not unlock even if my named license is associated with the products. I've done 4 complete uninstalls, run adobe registry cleaner, repackaged three different CC deployments from the admin console, and still cannot get it to work. Is this familiar with anyone? I've talked to Adobe Tech Support and was passed around from tech to tech for 2 hours with no solution. Thanks for any help in advance.
Bob
So for anyone else with a similar issue, I may have found the solution. First, despite being told the new VMS runs MoCA 2.0 (and the Verizon splitters all saying 2.0 on them), in the Actiontec Router settings, it states that the network is running 1.1, even without the ECB2500C plugged in. So take that for what it's worth.
Secondly, changing the "Ethernet / Coax Channel" from 1150Mhz to 1500 in the router settings has so far completely cleared up all of the previous symptoms. I'll post another update if I see any other weirdness running with these settings, but so far so good.
Similar Messages
-
My Windows 7 Ultimate computer received an unauthorized Windows overnight update followed by error messages. Bless Microsoft. To compound the problem there were NO restore dates found and no recent backups. I lost about the last entire year of data including all my many downloads and recent documents, etc.
Like another user, I also had more than a year of Thunderbird emails in my inbox and many other folders. Important to me. Now TBird won't open...at all... and gives me an error message: "Your Thunderbird profile cannot be loaded. It may be missing or inaccessible." OK. So I uninstalled it and REINSTALLED IT, more than once, and still get this same error message after a supposedly successful installation. The error message and then TBird fails to open. Shouldn't it create a new profile with the new install?No. It's looking for, and finding, profiles.ini but can't find the profile in the location stored in profiles.ini.
Deleting (or moving or renaming) profiles.ini should indeed force it to generate a new profile.
Do these help?
http://kb.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared
http://kb.mozillazine.org/Recovering_a_missing_profile -
OID/DAS migrate content to new install with a different realm - help
Hi all.
Need some advice.
We have a dev/test 9.0.4 (10gr1) apps environment that has a specific domain. However the PROD domain is different as the person who installed it couldn't work around the fact that the server had a different domain name than test/uat. So they put in place a Virtual Host.
I want to fix this as PROD is different to dev/uat.
1) I believe this can be done using the OUI_HOSTNAME of the runInstaller option on a new install
Can anyone confirm this ??
2) Once I build a NEW 9.0.4 infrastructure/middle tier with the correct domain - how do I:
a) Migrate users from "bad" domain to new infrastructure tier domain and maintain all SSO/privledges ?? Ldap export and import ??
b) Migrate my content across => we are using oracle Portal and an OC4J instance. I assume I can do a 'portal export' from old install and import into new install ?? IS this valid ....... and then just re-deploy the "ear" file to new application server install ??
many thanks on your adviceI figured out the answer shortly after posting my question: I booted to new disk in the FW enclosure while attached to my MBP, and ran Migration Assistant, selecting to copy data from the (old) internal disk to "this mac". I'll see how everything works six hours from now...
Regards,
Ira -
NEW Information with 9700 issue
I have been following the issues with the 9700 pro cards for some time now. I have read all the threads on this board and seen no fixes yet that work. I HATE to say it but everyone is barking up the wrong trees for this problem. As you read this and check your own system I'm sure that you will come to the same irritating answer that I have. I purchased my first ATI Built 9700 pro at first release in the stores. After installing I experienced distorted graphics and lock-ups. I then started hunting for a fix. Tried all the bios flashes, drivers and VIA 4in1's. all came up with the same result so I called ATI they said that it might be the card so I went back to the store and got another ATI built 9700 pro card and yet had the same issues. Then I go and get Gigabytes MAYA 9700 pro card. Now there is no more distorted graphics (NOTE to ATI you may have something that you can learn from Gigabyte) but I still get lock ups. So then I hunt down drivers and bios flashes from Omega which has been modifying drivers as long as I can remember. They did not work either. I also tried different motherboards and no change. So I conclude that VIA, MSI and ATI are not at fault for this problem. Although with this info may be able to come up with a solution.
Now I start digging hard into my system and OS yet to find the real blame. I found that my agp and sound are sharing the same IRQ. Now wether you know it or not you cannot change IRQ settings with XP. So I disable my sound and retest and get outrageous results. My frame rates increased and benchmarks raised by almost half. Numbers that were not even achieved in ATI's tests. So then I install a different sound card and it put it on IRQ11 and moved AGP IRQ form 16 to IRQ11. BACK TO SAME PROBLEM. I have alot of free IRQs and also have disabled coms which open IRQ 3 and 4 also but do you think XP would change settings so they didn't share. NOOOOTTTTTTT!!!!! I did try the same system but with windows ME so I could set the IRQs myself and with having nothing sharing the same IRQ it worked GREAT!! The only option I see at this time is to re-install windows and disable the acpi which is the culpret behind all this and run standard PC HAL which means no more power control for ATX motherboards "THANKS BILL". No matter how you try XP wants to share AGP slot with a PCI slot. Now with my ATI 8500 it shares with sound but no problems but you have to remember that the 9700 is a new creature that performs like never before and I'm sure with the demand that it puts on the system anything else on the same IRQ will get lost or corrupt packets resulting in a system lock up. At the bottom I will provide a link to a bulletin by MS that discibes the way and also why XP handles the IRQs the way it does.
I would like you to try the same as I have and remove anything sharing the same IRQ as the 9700 pro and see if you get the same results as I have. I have tested 3 cards and four MBs and refuse to try any more products just to come to the same answer. I think you will all come to the same conclusion that I have. "Kill Bill".
http://support.microsoft.com/default.aspx?scid=KB;EN-US;Q252420&ID=KB;EN-US;Q252420I was having the same problem with the 9700 pro on the KT400. was getting lockups and freezing everytime i tried to run a 3d game or benchmark. (solitaire ran sweet though). Even went as far as to buy a new mobo the a7n8x with nforce 2 chipset...low and behold the card worked fine...pity the board lasted about 2 hours then i had to send it back cos it was shafted...no post no nothing...ay well...
so i went back to my MSI kt4 ultra i tried so many combinations i was going blind but i think i finally found a combination that works....well for me anyway
im using
Catalyst 2.5
ControlPanel 6.13.10.6218
Via 4.45 hyperion
Fast write disabled in smartgart but enabled in bios dont ask me why but it works like that...i know it doest overwrite it but it works. also try this one. type smartgart into the run dialog, you get a new window not accesible through normal display properties. for some reason installing the catalyst drivers sometimes disables agp write and agp read which you can see here. click retest all then reboot smartgart will popup as soon as you reboot to let you know what the settings are now.
now its running sweet as a nut
getting 3DMark
13930 running normal
15928 overclocked FSB
not ruling out the fact that shared IRQ's maybe at fault but mine is still shared with my nic and not causing any problems.
like i said it worked for me.. just thought id let you know
KT400 MS-6590
XP 2400+
2x256 XMS 3000 DDR (333)
ATi 9700 Pro
Windows XP SP1
Catalyst 2.5, CP 6.13.10.6218
Via 4.45 hyperion
3dMark - 13930 - 15928oc -
Hi...I had some problems this summer that I won't go into much detail, but now I would like to upgrade to Snow Leopard from Leopard and I'm not sure how to go about it.
1) In middle of composition in July and software stops working as expected after upgrade. After days of trying to fix, I choose to create a partition with only OS X 10.5.? (from install DVD) and Sibelius/Garritan Concert & Marching Band sound library on the internal drive of the iMac. I now have a Sib partition (I call it-short for Sibelius) and a "B" partition that has all of the files from my previous hard drive config restored from Time Machine (on external 1 TB drive).
2) Time Machine will not do backups now because (?) the configuration it expected to see doesn't exist (hard drive with one partition). So I've skipped backups for 6 months.
3) I have added photos to iPhoto and tunes to iTunes to the "B" partition that I don't want to loose.
So how do I approach this? I will be deleting the Sib partition, installing Snow Leopard and wanting all of my files/libraries from the B partition back to my unpartitioned (same) hard drive. I don't want to loose any files in this transition. Both partitions have 10.5.4 as that was the version that came with the RestoreDVD.
Thanks for your help in resolving this issue...GregI'm not sure what you are asking at this point.
If you clone your current drive onto an external drive, you can then use the Snow Leopard installer to re-partition the internal drive as a single partition, erase it, and install Snow Leopard. You can use Carbon Copy Cloner, Super Duper, or Disk Utility to clone the drive. However, I am not certain how all of them handle the multiple partitions. You may hav to partition the drive and then clone each individual partition.
After installation, and when the new installation starts up, you will be presented with some options about migrating data from an old computer. Use that option and connect your external. Choose the B partition and your users and settings will be transferred to the new installation.
When you run iPhoto and iTunes, they will upgrade your libraries to the new versions. If you are running iLife 11, don't run iPhoto until you have updated it. There are two updates that will be available in software update. Once you've installed the first, run software update again to get the second one. -
New Customer with Service Issue
I am very frustrated with Verizon & customer service. Our family is new to Verizon within the last month. We drop calls all the time and get choppy service by our house. I talked to local store and they advised for me to call Customer Service. The representative made me reset my new phone and everything, then they sent me to next level support. The next level support did a case and tried to sell me an extender which I refused to do. I am a new customer who spent alot of money to switch why should a spend another $250. The next level suppport stated they would call me back today after the case was resolved & did not. After a few dropped calls today, I called back, the first next level support person wanted to reset my phone again and told me the engineer said there not really an issue. He had me on hold several times and on the phone for over 25 minutes. The call then dropped and rep never called me back. Got on the click to chat and Hannah called me to try to resolve. She sent me to next level support who could only offer to sell me the network extender. I feel that I should have never switched from AT&T to Verizon because they just want me to spend more money and not resolve my issue. I am stuck in a contract and if there is an emergency that happens in my area then my children will never be able to get ahold of me. My childrens safety is the most important thing to me but not to Verizon. Very disappointed!!!
Why did you switch?
Why didn't you figure this out during the return period?
You don't have access to any landlines for children to contact you in an emergency? -
I just purchased PrE 9 and installed it a couple of days ago. My biggest concern is how much lag there is in the playback under the timeline view. I primarily use this for creating music videos. I have one video track for the stills and their transitions, one (and sometimes two) video tracks for the titles and their transitions, and an audio track containing the music. The audio track plays consistently, but the timeline generally has a problem keeping up and visually staying in sync with the music. I've used other video editors before and I've never experienced this problem.
I have also been experiencing multiple crashes while editing. So much so that I tend to have to save my work after each edit. This appears to be related to another problem in which I get a notice when starting up that I'm using a generic display driver and it will affect performance. At the start I was using a generic monitor driver but I replaced it with the driver specific to my monitor and yet I intermittently get these notices, and when I do the whole system seems to lag and overuse the CPU to the point I start getting warnings and eventually crash.
I've updated my graphics driver (Radeon x1950) and monitor driver so they are all current. I use a pentium 4 3ghz dual cpu with 2 gb of ram. I've been in touch with support and they want me to re-install the program. I'm hesitant to do that as apparently the installation process messes with the disk burning drivers to the point that I have to re-install my Primera Disc Publishing software for my Bravo SE printer/duplicator.
Anyone have any ideas or should I just abandon PrE at this point for another video editor?A line may be red for two reasons:
1. You picked the wrong Preset so PRE cannot process it properly. If this is the case the line would be red as soon as you have loaded it.
2. You have applied some adjustment to a portion of your timeline (e.g. a Transition, Effect, or a scaling or changing opacity ....). These red lines mean that when you view your project in the monitor you are seeing a 'rough' version. If you 'render' those line by pressing [Enter] PRE will make a 'good' copy of that footage.
AHA!!!
This seems to be getting to the answer somewhat! I rendered as you mentioned and it cleared the lines and performed well, but at a pretty high cost in storage as would be expected. I've tried projects with AVCHD 720p square pixel and DV-NTSC. I'm somewhat flying blind without some clear references to understanding what project type would best suit me, so if you have any references, I'd appreciate it.
And give us some information about your clip and hardware:
* Use the *http://www.headbands.com/gspot/* to analyse the file and post screen image.
* What project preset did you use?
* Where did the clip come from?
* How did you get it into PRE?
* Post back here with the necessary information described here: http://forums.adobe.com/thread/459220?tstart=0
I've included a gspot screen capture of one of my .MOV projects. As mentioned above I've tried a couple of differnt project presets but I'm kind of flying blind on that issue.
I'm not sure what you mean by "clips" in that there are no real video clips in my projects. Each scene consists of a single still image on the video track which has a transition into it, a transition out, and on a secondary video track I have the titles with their own transitions. I coordinate these elements with an audio track which is a .WAV file. The clips (read stills) come from various sources on either the internet or digital photo. I bring them in via the organizer and drop them onto the video timeline where they need to be and adjust where it begins and ends relative to the audio track and add the appropriate transitions or fade-out/fade-ins.
In terms of tuning appropriate levels of software, as mentioned before this has all been done previously in trying to troubleshoot the problems. QuickTime and Windows updater are all up to current rev levels as are the display and graphics drivers. I use tune-up utilities 2010 in scheduled mode (nightly) which keeps my disks defraged as well as a clean and tuned registry and eliminates any temp files.
When I run PRE I've been putting the computer into Tuneup's Turbo mode which puts most background processes to sleep and turns off some of the more hefty Windows appearence features, so there's not much likelihood you'll find much wrong with the overally performance and maintenance on this computer.
The specifics of the computer are:
System Information
Time of this report: 12/27/2010, 08:35:50
Machine name: DAVES-COMPUTER
Operating System: Windows 7 Home Premium 32-bit (6.1, Build 7600) (7600.win7_gdr.100618-1621)
Language: English (Regional Setting: English)
System Manufacturer: Gateway
System Model: 830GM
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs), ~3.0GHz
Memory: 2048MB RAM
Available OS Memory: 2030MB RAM
Page File: 1515MB used, 2545MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: The file MAudioFastTrackPro.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
Sound Tab 2: The file MAudioFastTrackPro.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
Input Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: Radeon X1950 Series (Microsoft Corporation - WDDM)
Manufacturer: ATI Technologies Inc.
Chip type:
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_7240&SUBSYS_0D021002&REV_00
Display Memory: 1270 MB
Dedicated Memory: 511 MB
Shared Memory: 759 MB
Current Mode: 1920 x 1080 (32 bit) (59Hz)
Monitor Name: SyncMaster P2370(G)/P23700(G),Magic P2370G(Digital)
Monitor Model: SyncMaster
Monitor Id: SAM052A
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: DVI
Driver Name: atiumdag.dll,atiumdva.cap,atitmmxx
Driver File Version: 8.14.0010.0630 (English)
Driver Version: 8.56.1.15
DDI Version: 9Ex
Driver Model: WDDM 1.0
Driver Attributes: Final Retail
Driver Date/Size: 7/13/2009 20:14:55, 4030976 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-3100-11CF-C471-082DA1C2C535}
Vendor ID: 0x1002
Device ID: 0x7240
SubSys ID: 0x0D021002
Revision ID: 0x0000
Driver Strong Name: atiilhag.inf:ATI.Mfg.NTx86...1:ati2mtag_R580:8.56.1.15:pci\ven_1002&dev_7240
Rank Of Driver: 00F42001
Video Accel: ModeMPEG2_A ModeMPEG2_C
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
D3D9 Overlay: Not Supported
DXVA-HD: Not Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
Sound Devices
Description: Line 1/2 (M-Audio FastTrack Pro)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: USB\VID_0763&PID_2012&REV_0100
Manufacturer ID: 239
Product ID: 65535
Type: WDM
Driver Name: MAudioFastTrackPro.sys
Driver Version: 5.10.0000.5134 (English)
Driver Attributes: Final Retail
WHQL Logo'd: No
Date and Size: 11/9/2009 13:56:10, 158600 bytes
Other Files:
Driver Provider: M-Audio
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Description: S/PDIF (M-Audio FastTrack Pro)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: USB\VID_0763&PID_2012&REV_0100
Manufacturer ID: 239
Product ID: 65535
Type: WDM
Driver Name: MAudioFastTrackPro.sys
Driver Version: 5.10.0000.5134 (English)
Driver Attributes: Final Retail
WHQL Logo'd: No
Date and Size: 11/9/2009 13:56:10, 158600 bytes
Other Files:
Driver Provider: M-Audio
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
Description: Line 1/2 (M-Audio FastTrack Pro)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: MAudioFastTrackPro.sys
Driver Version: 5.10.0000.5134 (English)
Driver Attributes: Final Retail
Date and Size: 11/9/2009 13:56:10, 158600 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Description: Line 3/4 (M-Audio FastTrack Pro)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: MAudioFastTrackPro.sys
Driver Version: 5.10.0000.5134 (English)
Driver Attributes: Final Retail
Date and Size: 11/9/2009 13:56:10, 158600 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF -
VMS new install - IP box issues
Installed my VMS and 2 IP boxes without issue. However, I am now seeing a problem between the IP boxes. I only have the 3 total units. While watching a channel on IP1, if I put the same channel on IP2, IP1 freezes, as if it were paused.
To correct the problem, I need to turn off IP2 then change the channel on IP1 to something different and then return to the original channel. Anyone else seeing this? We have to be able to watch the same channel on multiple TVs...I did a bit of Googling after I've been working this issue for several hours straight, and it seems I have the dreaded "NF3 vs 6800" issue.
I have flashed the BIOS to clock the BFG 6800GT OC back down to 350/1000 and even went so far to push it back to 345/1000. I have turned fastwrites off, the hidden ATI/NV setting in the BIOS is turned off, I tried pushing the voltage to the card up to 1.6 and used NiBitor and RivaTuner to try and force the 2d/3d times to be the same.
Nothing worked. I'm still getting annoying "RGB pixilation" as well as periodic UI freezes for half a second. Called BFG and they said they knew of no issues, and after doing a bit of searching on this board, it seems to be an NForce vs. 6800 problem.
Has anyone got any other ideas before I go over to the darkside and purchase a VIA board? -
[Solved but not completely] New install with Kde 4.7 Full
Is kde 4.7 a bit heavy ? I have the proper ATI drivers installed which I used on all my distros. This is the first time I am using 4.7.
Last edited by Zulfikar (2012-01-25 06:49:06)panosk wrote:
Zulfikar wrote:
nbtrap wrote:
Zulfikar:
You have to click on the "Preview" button in the Dolphin toolbar to toggle previews. Also, make sure you enable them in "Configure Dolphin", as arojas said.
I have tried all options even the preview stuff but nothing.
I think you also have to install kdegraphics-strigi-analyzer.
I just reinstalled KDE and all the codes,now I get the thumbnails -
Superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem and not SWAP or UFS or something else, then the superblock is corrupt and you might try running e2sck with and alternate superblock: e2sck -b 8193 <device>
I get this error after a new install and reboot, any idea what this mean and how to fix it.
Appreciate all the help.
This is a AMD 1.8mgz and 1 gig of ram on Asus mb.I just downloaded the image archlinux 2009.02 core i686 and was able to install with no issues. I was able to reboot successfully. It appears to be an issue with the newest installer specificly. turtle, try the old installer and see if you can't get things working. This should work for the OP too.
I got it to boot after an install for the first time using this older install image.
I wasted 8 freaking hours trying to figure out the problem and the answer is as simple as use the older installer. Shesh.
I was wrong. I installed once successfully in one of the computers on an 80 gb hard drive. When trying to reinstall on two different 120 gig hard drives the error repeated itself. I'm spent on this. I'm going to have to try another distro.
After two more installs I can get it to load but I'm now having a superblock last load time is in the future error.
Used fsck on all my partitions to fix the problem and now I have a successfully booting arch system. Guess I won't have to jump ship just yet.
------update, maybe this will help somebody----------
I'm not sure why but the partitions on my first disk are all referred to as sda and not hda even though all my hard drives are IDE (via command 'df', fstab has them listed by UID).
Even weirder, when I installed a new hard drive into the machine, I had to format it and mount it by referring to /dev/sdb and not /dev/hdb like I expected. This is odd as I don't even have any sata connections in my machine. Could someone tell me why this is happening. Is it a 'feature' or a 'bug' of arch?
lldmer, I wish I had listened to you when I was trying to install over and over the day before yesterday. Looks like you hit the nail on the head on this one. I wish I had tried what you suggested. The weird thing is that when I was originally having problems, the fstab did have the drives listed by UID. I wonder if changing those UID entries to /dev/sda style entries would have fixed my problems.
If I install arch again, I'll have to try that.
Last edited by bodyhead (2009-10-26 14:55:14) -
AdobeFlashPlayerInstaller_14_ltrosxd_aaa_aih.dmg Will Not Install with Mac OS 10.9.4
Hi all i was prompted to install the new flash update,
i tried to install at first i was getting an error with safari being open, when it was closed, i had forced quit the browser
and also checked Activity Manager to make sure it was shut.
after reading the adobe help information i uninstalled flash and restarted the computer, i started the process again
the safari problem did not come up apon the new install, But i had a new problem i get a general error at around 75-85%,
of the install.e
so now i have no flash player, i read the forums there is another thread that links, install_flash_player_osx-.dmg
some people saying that this works for OS 10.9.4, so i tried this option but now the file does not pass the download stage of the install at around 20%.
and the same old General error comes up again leaving me stuck, i am a stay at home dad that builds websites and i need Flash Player.
any help would be greatly welcomed.@Kiwisox
Thank you for providing the files. I didn't get a chance to look at them yesterday, but will do so today.
@Odawg76,
Please start a new thread with your issue, as it appears to be different from Kiwisox. It is also difficult to respond to various users in the same thread and keep responses relevant to each individual as the forums software doesn't nest responses to individual users, but lists everything chronologically. Please follow the guidelines here, Read Before Posting: How To Get A Useful Answer To Your Question, when creating your new thread. I've actually not seen the "Safari can't connect to server" returned by the Flash Player installer. Please include a screenshot of the error. Instructions available here, How to post a screenshot in the forum. Thank you.
@nikondvr
You're issue appears to be different from Kiwisox. On Mac, simply closing an application window does not quit the application. You need to actually terminate Safari for Flash Player installation to proceed.
There are a few different ways to Quit Safari:
Quit Safari app from the Dock icon:
Mouse over the Safari icon in the Dock
Press CTRL and left-mouse click at the same time
A menu will display. Click Quit to terminate the application.
Use Activity Monitor to terminate Safari:
Launch Activity Monitor from Applications/Utilities/Activity Monitor
Ensure 'All Processes' are being listed (menu in the upper right)
Find and select Safari
Click the Quit Process button (upper left)
Maria -
Constantly checks addon compatibily on new install v32
Since I have updated to the latest FF v32 it always checks the compatibility of the addons everytime I start it up. It was really annoying so i went back to a previous version and everything worked fine, all the addons worked and there was no issue but this new version has done nothing but give me a headache. Is this a bug in the new system update or what? Done a new install with it, with a new directory and tried with same. Delete old prefetch (if any), windows cache, restarted but the same issue.
Running Win7 64-bitYou can only bring up the Profile Manager when all Firefox instances are closed, so if necessary check that in the Windows Task Manager on the processes tab.
-
I have a client who wants to 'merge' 2 separate instances into a single instance in 11.5.10. The 2 separate instances are at different application and database levels, but do have commonalities, such as the COA structure. Part of the single instance project requires that the current CoA structure be changed from the current model. My impression and experience has told me this is a new install with a data migration from the 2 instances. Would that be the consensus of this group as well? Would there be any benefit to upgrading the 'newer' instance, creating a new SOB with the new structure, and then migrating data from the 'older' instance into the 'newer'/upgraded instance, which then serves as the single instance. Part of the migrations however, would BOTH require data conversion and mapping from the old COA to the new COA...
Any specefic Reasons why Multi Org can not be used here
-
New install will NOT load r8169 net module
After doing bad forced upgraded did new install with
10/9 iso. Install the base base-dev . rebooted to NO network.
with lsmod showed r8169 not loaded. [have openSUSE 12.2 on box using the r8169]
modprobe -va r8169 [ nothing on sysout and no load]
added file /etc/modules-load.d/r8169.conf with r8169 in file.
rebooted no load; journalctl showed this error:
system-modules-load [223] failed to lookup alias r8169 function not implemented
tried same file at /run/modules-load.d/ [ no error or no load]
Other strange on this load: at login linux 3.3, the /usr/lib/modules3.6.6 ??Other strange on this load: at login linux 3.3, the /usr/lib/modules3.6.6 ??
There's at least a few typo in here somewhere, but I'm guessing that you're trying to imply that there's a mismatch between the running kernel and the modules on disk. You've probably fubar'd a kernel upgrade by not having /boot mounted. You should fix that. There's probably a lot of other modules that aren't being loaded.
Last edited by falconindy (2012-10-21 04:40:50) -
I'm wondering if it is even possible to install the FCS 3 on brand new out-of-the-box Mavericks OS.... I need FCP 7 for my work. I allready installed FInal Cut Studio 3 on my Mavericks MacBook Air, but that OS was an updated one, from the previos version. It works greate (rendering is a nightmare though :-)).
The thing is that i have read meny post about People unable to Install Finac Cut Studio 3 on a brand new - not updated - Mavericks....
Will i I be able to install Final Cut Studio 3 on a brand new iMac with Mavericks out-of-the-box?Yes,
I have friends who have FCS 2009 (aka FCS 3) running on 10.9 machines from fresh installs.
Be aware that if you use a third party output device (Kona, Decklink, MXO, etc) you must have the updated drivers as well.
One friend had such issues with his Blackmagic Intensity card in a MacPro that he went back to an earlier OSX to find stability.
x
Maybe you are looking for
-
Hi, Im having trouble with the Gmail manager plugin. I recently upgraded to the latest version of firefox and after i did this for some reason the gmail manager plugin decided not to log into my account any more. It did say that it was compatible wit
-
No photos in Photostream, but 3rd party apps show that the photos are there
I am having a problem, not sure where to post it. Here is what is happening: 1. Take a photo with iPhone 4 2. Syncs to great up until last night 3. Last night I brought a photo into Nik's Snapseed app on my iPad (import from Photostream) 4. Now, my s
-
I have no clue how to program these flash galleries....My site www.al-burke.com contains a flash web gallery that I purchased online and I have been able to upload it to the site but its says movie not loaded. I have all the neccessary files in place
-
Standalone SQL Server monitoring with Solution Manager
Hi, We have a Solman 3.1 instance monitoring all of our SAP and non-SAP Infrastructure. We have several SQL Server systems we would like to monitor. Currently we have installed saposcol and sapccms agents on the servers and are getting the OS alerts
-
This spells the end for Blackberry
what a disaster. Been on the phone to Blackberry, Vodafone, Geek Squad all who have no idea how to resolve syncing BB Passport with Outlook 2014 on Windows 8.1. Quite simply, it doesnt work. I cant believe a phone that sells itself as being for the s