New Installation - 11.5.10.2 - Rapid Start - Forms don´t goes up.

Good evening,
I've just finished installing Oracle E-Business Suite - 11.5.10.2 version Rapid Start (if u don't know it is a pre-setup environment, but it is exactly the same product)
I've installed it on Oracle Enterprise Linux version 4, following all pre-requisites.
I can logon to the application, choose a responsibility and when i pick a function to open the Oracle Forms, nothing happens.
It isn't a problem with Jinitiator, becuase it isn't prompted to installed, the problem is before the application ask to install this Jinitiator.
When i checked the address
http://avantasia.angra.com:8000/dev60cgi/f60cgi
The browser tells me that:
Oracle Forms Web CGI: Error detected
Error: Parameter "play" not found in URL or configuration parameters.
This make me happen that i have a problem with the last step of the Rapid Start installation, the execution of a file name "formsplayback.sh"
Do you have some idea of what is the problem and how to solve it ?
If someone needs more information i can upload the instructions of this archive "formsplayback.sh" or anything else.
Anyway thanks so much,
Gustavo

mdtaylor
I've stopped and started it all manually but...same problems occur. It seems that forms try to goes up, but is cut in the middle suddenly.
hsawwan
I've checked the directory you tell me.
a) Database Tier: I'm putting the log files that if found there
1) adconfig.log
Starting AutoConfig at Fri Mar 28 00:41:18 2008
Using adconfig.pl version 115.56.11511.2
     Using java command : /erpp/erppdb/9.2.0/jre/1.4.2/bin/java
     Java version : 1.4.2_02
     Classpath : /erpp/erppdb/9.2.0/jre/1.4.2/lib/rt.jar:/erpp/erppdb/9.2.0/jdbc/lib/ojdbc14.jar:/erpp/erppdb/9.2.0/appsutil/java/xmlparserv2.zip:/erpp/erppdb/9.2.0/appsutil/java:/erpp/erppdb/9.2.0/jlib/netcfg.jar
===========================================================================
Starting Utility to Report Version Conflicts at Fri Mar 28 00:41:20 GMT-03:00 2008
Using VersionConflictListGenerator.java version 115.2
All driver files processed.
No version conflict encountered.
===========================================================================
     Using Context file : /data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Attempting to create a back up of the Context file
Created back up file of name :
/erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/ERPP_avantasia.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature : Unverified
File system template : /erpp/erppdb/9.2.0/appsutil/template/adxdbctx.tmp
Checking for customizations to Context template
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations.
Looking for custom template at : /erpp/erppdb/9.2.0/appsutil/template/custom/adxdbctx.tmp
Custom template : Not available
Customizations found : None
File system Context file :/data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Checking the Context file for possible updates from the Database
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
===========================================================================
Starting Updates of Context file Fri Mar 28 00:41:22 GMT-03:00 2008
found context version : 115.71
available update version : 115.71
No updates to apply
Ending Updates of Context file
===========================================================================
===========================================================================
Config Tool CVMHelper started at Fri Mar 28 00:41:22 GMT-03:00 2008
===========================================================================
Updating local context file variables for Database Tier
Making database connection using DBUtil
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Exception occurred: java.sql.SQLException: Excepción de E/S: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=avantasia.angra.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ERPP)))
Exception occurred: java.sql.SQLException: Excepción de E/S: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=avantasia.angra.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ERPP.angra.com)))
Exception occurred: java.sql.SQLException: Excepción de E/S: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
Exception occurred while preseeding variables in the context file: java.sql.SQLException: Could not get connection to the database
StackTrace:
java.sql.SQLException: Could not get connection to the database
     at oracle.apps.ad.tools.configuration.CVMHelper.processNewContextFile(CVMHelper.java:525)
     at oracle.apps.ad.context.CtxValueMgt.preSeed2Ctx(CtxValueMgt.java:1714)
     at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1516)
     at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:661)
===========================================================================
Starting Context Value Management System at Fri Mar 28 00:41:22 GMT-03:00 2008
Using version 115.31
Options:
Force : no
Contextfile : /data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Templatefile : /erpp/erppdb/9.2.0/appsutil/template/adxdbctx.tmp
ValueUpdateFile : /erpp/erppdb/9.2.0/appsutil/template/adcvmdb.xml
Verifying value management system requirements:
ContextFile : VALID
Template File : VALID
ValueUpdateFile : VALID
Parsing the ValueUpdateFile
[ s_contextfile ]
Action : seed
Change reason : Setting the location to what has been specified by user
New value : /data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
[ s_adperlprg ]
Action : seed
Change reason : Setting the location to what has been specified by user
New value : /erpp/erppdb/9.2.0/Apache/perl/bin/perl
[ s_perl5lib ]
Action : seed
Change reason : Setting the location to what has been specified by user
New value : /erpp/erppdb/9.2.0/Apache/perl/lib/5.00503:/erpp/erppdb/9.2.0/Apache/perl/lib/site_perl/5.005:/erpp/erppdb/9.2.0/appsutil/perl
[ s_db_tnsadmin ]
Action : translate
Change reason : Resetting it to correct value
Expected value : /erpp/erppdb/9.2.0/network/admin
Found value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
New value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_tnsadmin ]
Action : translate
Change reason : Resetting it to correct value
Expected value : /erpp/erppdb/9.2.0/network/admin/ERPP
Found value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
New value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_linkctrl ]
Action : translate
Change reason : It should be unset in AutoConfig enabled RDBMS setup
Expected value : L_PTHREADS_D7
Found value :
New value :
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_systemname ]
Action : translate
Change reason : Resetting it to correct value
Expected value : ERPP
Found value : ERPP
New value : ERPP
Check Condition : Unconditional
[ s_db_nlslang ]
Action : translate
Change reason : Resetting it to correct value
Expected value : American_America.%s_at_cset%
Found value : American_America.UTF8
New value : American_America.UTF8
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_path ]
Action : translate
Change reason : Environment Variables should be updated through the context editor
Expected value : /erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:$PATH
Found value : /erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:$PATH
New value : /erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:$PATH
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_ldlib ]
Action : translate
Change reason : Environment Variables should be updated through the context editor
Expected value : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib
Found value : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
New value : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/lib:/usr/dt/lib:/erpp/erppdb/9.2.0/ctx/lib
Check Condition : Unconditional
INFO : Customer specified value - skipping
===========================================================================
[ Config tool : /erpp/erppdb/9.2.0/appsutil/bin/adgentns.pl ]
Command : /erpp/erppdb/9.2.0/Apache/perl/bin/perl -I /erpp/erppdb/9.2.0/Apache/perl/lib/5.00503:/erpp/erppdb/9.2.0/Apache/perl/lib/site_perl/5.005:/erpp/erppdb/9.2.0/appsutil/perl /erpp/erppdb/9.2.0/appsutil/bin/adgentns.pl PASSWORD contextfile=/data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Action : execute
Warning : Executable is a Symbolic link to /data/erpp/erppdb/9.2.0/appsutil/bin/adgentns.pl
SCRIPT RETURNED:
Generate Tns Names
Using java command: /erpp/erppdb/9.2.0/jre/1.4.2/bin/java
JAVA_HOME :
Java version : 1.4.2_02
Classpath : /erpp/erppdb/9.2.0/jre/1.4.2/lib/rt.jar:/erpp/erppdb/9.2.0/jdbc/lib/ojdbc14.jar:/erpp/erppdb/9.2.0/appsutil/java/xmlparserv2.zip:/erpp/erppdb/9.2.0/appsutil/java
Loading ORACLE_HOME environment from /erpp/erppdb/9.2.0
Logfile: /erpp/erppdb/9.2.0/appsutil/log/ERPP_avantasia/03280041/NetServiceHandler.log
tnsnames.ora instantiated
listener.ora instantiated
adgentns.pl exiting with status 0
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Result : SUCCEEDED
===========================================================================
Ending Context Value Management System.
===========================================================================
===========================================================================
No uploading of Context file and its templates to database. Database conection failed
===========================================================================
Updating rdbms version in Context file to db920
Updating rdbms type in Context file to 32 bits
Configuring templates from ORACLE_HOME ...
Processing DriverFile = /erpp/erppdb/9.2.0/appsutil/template/addbtmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for AppsUtil
Creation of Directory - /data/erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia Succeeded.
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adlicnse.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adlicnse.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adlicnse.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adlicnse.sql
setting permissions: 600
setting ownership: applerpp:dba
File /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia/listener.ora of type INSTALL already exists, this file will not be instantiated.
File /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia/tnsnames.ora of type INSTALL already exists, this file will not be instantiated.
Creation of Directory - /data/erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia Succeeded.
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adstopdb.sql
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstopdb.sql
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstopdb.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adstopdb.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adstrtdb.sql
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstrtdb.sql
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstrtdb.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adstrtdb.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbccnv.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbccnv.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbccnv.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/addbccnv.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adclobconv.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobconv.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobconv.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adclobconv.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adclobtmp.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobtmp.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobtmp.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adclobtmp.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adpreclone.pl
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adpreclone.pl
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adpreclone.pl to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adpreclone.pl
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrobj.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adcrobj.sql
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adchknls.pl
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adchknls.pl
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adchknls.pl to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adchknls.pl
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/ad8idbux.env
dest : /erpp/erppdb/9.2.0/ERPP_avantasia.env
backup : /erpp/erppdb/9.2.0/ERPP_avantasia.env to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/ERPP_avantasia.env
setting permissions: 644
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adupdlib_ux.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adupdlib.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adupdlib.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adupdlib.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrdb.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdb.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdb.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adcrdb.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adsvdb.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdb.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdb.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adsvdb.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adsvdlsn.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdlsn.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdlsn.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adsvdlsn.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adsvdcnv.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdcnv.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdcnv.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adsvdcnv.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbprf.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/addbprf.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbprf.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/addbprf.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbupdgsm.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbupdgsm.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbupdgsm.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/addbupdgsm.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/afdbprf.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/afdbprf.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/afdbprf.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/afdbprf.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbctl.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addbctl.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addbctl.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/addbctl.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addlnctl.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addlnctl.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addlnctl.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/addlnctl.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adlsnodes_ux.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adlsnodes.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adlsnodes.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adlsnodes.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adlnkoh.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/adlnkoh.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/adlnkoh.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adlnkoh.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrdbrdlg.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdbrdlg.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdbrdlg.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adcrdbrdlg.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adautocfg_ux.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adautocfg.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adautocfg.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adautocfg.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrobj.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adcrobj.sh
setting permissions: 700
setting ownership: applerpp:dba
File /erpp/erppdb/9.2.0/dbs/initERPP.ora of type INSTALL already exists, this file will not be instantiated.
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/afmkinit.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afmkinit.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afmkinit.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/afmkinit.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/config_ux.c
dest : /erpp/erppdb/9.2.0/rdbms/lib/config.c
backup : /erpp/erppdb/9.2.0/rdbms/lib/config.c to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/config.c
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcmclean.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcmclean.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcmclean.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adcmclean.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcctclean.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcctclean.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcctclean.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adcctclean.sql
setting permissions: 600
setting ownership: applerpp:dba
AutoConfig Setup Phase
Running Setup Process 1 of 2 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/Apache/perl/bin/perl -I /erpp/erppdb/9.2.0/Apache/perl/lib/5.00503:/erpp/erppdb/9.2.0/Apache/perl/lib/site_perl/5.005:/erpp/erppdb/9.2.0/appsutil/perl /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adchknls.pl
script returned:
Validating information needed for NLS........
DATABASE version : db920
No NLS specific checks required
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 2 of 2 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afmkinit.sh
script returned:
afmkinit.sh started at vie mar 28 00:41:36 ART 2008
The environment settings are as follows ...
ORACLE_HOME : /erpp/erppdb/9.2.0
ORACLE_SID : ERPP
TWO_TASK :
PATH : /erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/erpp/homes/oraerpp/bin:/erpp:/erpp/scripts:/sbin:/erpp/erppdb/9.2.0/OPatch
LD_LIBRARY_PATH : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
afmkinit.sh exiting with status 0
.end std out.
.end err out.
AutoConfig Profile Phase
Running Profile Process 1 of 1 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sh
script returned:
afdbprf.sh started at vie mar 28 00:41:37 ART 2008
The environment settings are as follows ...
ORACLE_HOME : /erpp/erppdb/9.2.0
ORACLE_SID : ERPP
PATH : /erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/erpp/homes/oraerpp/bin:/erpp:/erpp/scripts:/sbin:/erpp/erppdb/9.2.0/OPatch
LD_LIBRARY_PATH : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
Executable : /erpp/erppdb/9.2.0/bin/sqlplus
SQL*Plus: Release 9.2.0.5.0 - Production on Fri Mar 28 00:41:37 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Services Phase
Running Service Process 1 of 1 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sh
script returned:
adcrobj.sh started at vie mar 28 00:41:37 ART 2008
Parameters passed are : APPS apps
The environment settings are as follows ...
ORACLE_HOME : /erpp/erppdb/9.2.0
ORACLE_SID : ERPP
TWO_TASK :
PATH : /erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/erpp/homes/oraerpp/bin:/erpp:/erpp/scripts:/sbin:/erpp/erppdb/9.2.0/OPatch
LD_LIBRARY_PATH : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
SQLPLUS Executable : /erpp/erppdb/9.2.0/bin/sqlplus
SQL*Plus: Release 9.2.0.5.0 - Production on Fri Mar 28 00:41:37 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
adcrobj.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia
afdbprf.sh INSTE8_PRF 1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia
adcrobj.sh INSTE8_APPLY 1
AutoConfig is exiting with status 2
The log file for this session is located at: /erpp/erppdb/9.2.0/appsutil/log/ERPP_avantasia/03280041/adconfig.log
Starting AutoConfig at Fri Mar 28 00:41:52 2008
Using adconfig.pl version 115.56.11511.2
     Using java command : /erpp/erppdb/9.2.0/jre/1.4.2/bin/java
     Java version : 1.4.2_02
     Classpath : /erpp/erppdb/9.2.0/jre/1.4.2/lib/rt.jar:/erpp/erppdb/9.2.0/jdbc/lib/ojdbc14.jar:/erpp/erppdb/9.2.0/appsutil/java/xmlparserv2.zip:/erpp/erppdb/9.2.0/appsutil/java:/erpp/erppdb/9.2.0/jlib/netcfg.jar
===========================================================================
Starting Utility to Report Version Conflicts at Fri Mar 28 00:41:52 GMT-03:00 2008
Using VersionConflictListGenerator.java version 115.2
All driver files processed.
No version conflict encountered.
===========================================================================
     Using Context file : /data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Attempting to create a back up of the Context file
Created back up file of name :
/erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/ERPP_avantasia.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Established
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Connection obtained
-------------------ADX Database Utility Finished---------------
OAM Context editing support feature: Enabled
OAM Customization support feature : Enabled
File system template : /erpp/erppdb/9.2.0/appsutil/template/adxdbctx.tmp
Checking for customizations to Context template
Customizations found : None
File system Context file :/data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Checking the Context file for possible updates from the Database
Result : The Context file has no database equivalent
===========================================================================
Starting Updates of Context file Fri Mar 28 00:41:55 GMT-03:00 2008
found context version : 115.71
available update version : 115.71
No updates to apply
Ending Updates of Context file
===========================================================================
===========================================================================
Config Tool CVMHelper started at Fri Mar 28 00:41:55 GMT-03:00 2008
===========================================================================
Updating local context file variables for Database Tier
Making database connection using DBUtil
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Connection obtained
-------------------ADX Database Utility Finished---------------
Database connection successfully obtained
Updating context file variables for Database Tier
Checking for new context variables
No new variables found in the context file
Processing existing variables with updated defaults
Writing Context File back to File System
Context file updated
Closing connection
Connection closed
===========================================================================
Starting Context Value Management System at Fri Mar 28 00:41:56 GMT-03:00 2008
Using version 115.31
Options:
Force : no
Contextfile : /data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Templatefile : /erpp/erppdb/9.2.0/appsutil/template/adxdbctx.tmp
ValueUpdateFile : /erpp/erppdb/9.2.0/appsutil/template/adcvmdb.xml
Verifying value management system requirements:
ContextFile : VALID
Template File : VALID
ValueUpdateFile : VALID
Parsing the ValueUpdateFile
[ s_contextfile ]
Action : seed
Change reason : Setting the location to what has been specified by user
New value : /data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
[ s_adperlprg ]
Action : seed
Change reason : Setting the location to what has been specified by user
New value : /erpp/erppdb/9.2.0/Apache/perl/bin/perl
[ s_perl5lib ]
Action : seed
Change reason : Setting the location to what has been specified by user
New value : /erpp/erppdb/9.2.0/Apache/perl/lib/5.00503:/erpp/erppdb/9.2.0/Apache/perl/lib/site_perl/5.005:/erpp/erppdb/9.2.0/appsutil/perl
[ s_db_tnsadmin ]
Action : translate
Change reason : Resetting it to correct value
Expected value : /erpp/erppdb/9.2.0/network/admin
Found value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
New value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_tnsadmin ]
Action : translate
Change reason : Resetting it to correct value
Expected value : /erpp/erppdb/9.2.0/network/admin/ERPP
Found value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
New value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_linkctrl ]
Action : translate
Change reason : It should be unset in AutoConfig enabled RDBMS setup
Expected value : L_PTHREADS_D7
Found value :
New value :
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_systemname ]
Action : translate
Change reason : Resetting it to correct value
Expected value : ERPP
Found value : ERPP
New value : ERPP
Check Condition : Unconditional
[ s_db_nlslang ]
Action : translate
Change reason : Resetting it to correct value
Expected value : American_America.%s_at_cset%
Found value : American_America.UTF8
New value : American_America.UTF8
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_path ]
Action : translate
Change reason : Environment Variables should be updated through the context editor
Expected value : /erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:$PATH
Found value : /erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:$PATH
New value : /erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:$PATH
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_ldlib ]
Action : translate
Change reason : Environment Variables should be updated through the context editor
Expected value : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib
Found value : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
New value : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/lib:/usr/dt/lib:/erpp/erppdb/9.2.0/ctx/lib
Check Condition : Unconditional
INFO : Customer specified value - skipping
===========================================================================
[ Config tool : /erpp/erppdb/9.2.0/appsutil/bin/adgentns.pl ]
Command : /erpp/erppdb/9.2.0/Apache/perl/bin/perl -I /erpp/erppdb/9.2.0/Apache/perl/lib/5.00503:/erpp/erppdb/9.2.0/Apache/perl/lib/site_perl/5.005:/erpp/erppdb/9.2.0/appsutil/perl /erpp/erppdb/9.2.0/appsutil/bin/adgentns.pl PASSWORD contextfile=/data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Action : execute
Warning : Executable is a Symbolic link to /data/erpp/erppdb/9.2.0/appsutil/bin/adgentns.pl
SCRIPT RETURNED:
Generate Tns Names
Using java command: /erpp/erppdb/9.2.0/jre/1.4.2/bin/java
JAVA_HOME :
Java version : 1.4.2_02
Classpath : /erpp/erppdb/9.2.0/jre/1.4.2/lib/rt.jar:/erpp/erppdb/9.2.0/jdbc/lib/ojdbc14.jar:/erpp/erppdb/9.2.0/appsutil/java/xmlparserv2.zip:/erpp/erppdb/9.2.0/appsutil/java
Loading ORACLE_HOME environment from /erpp/erppdb/9.2.0
Logfile: /erpp/erppdb/9.2.0/appsutil/log/ERPP_avantasia/03280041/NetServiceHandler.log
adgentns.pl exiting with status 0
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Result : SUCCEEDED
===========================================================================
Ending Context Value Management System.
===========================================================================
===========================================================================
Uploading file system Context file and its templates to the database
Context file :
/data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Connection obtained
-------------------ADX Database Utility Finished---------------
Result : Successfully uploaded the Context file to the DataBase
Context template file :
/erpp/erppdb/9.2.0/appsutil/template/adxdbctx.tmp
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Connection obtained
-------------------ADX Database Utility Finished---------------
Result : Successfully uploaded the Context template file to the DataBase
Uploading the Context information template to the DataBase
Context information template :
/erpp/erppdb/9.2.0/appsutil/template/adxdbinf.tmp
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Connection obtained
-------------------ADX Database Utility Finished---------------
Result : Successfully uploaded the Context information template file to the DataBase
===========================================================================
Updating rdbms version in Context file to db920
Updating rdbms type in Context file to 32 bits
Configuring templates from ORACLE_HOME ...
Processing DriverFile = /erpp/erppdb/9.2.0/appsutil/template/addbtmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for AppsUtil
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adlicnse.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adlicnse.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adlicnse.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adlicnse.sql
setting permissions: 600
setting ownership: applerpp:dba
File /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia/listener.ora of type INSTALL already exists, this file will not be instantiated.
File /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia/tnsnames.ora of type INSTALL already exists, this file will not be instantiated.
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adstopdb.sql
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstopdb.sql
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstopdb.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adstopdb.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adstrtdb.sql
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstrtdb.sql
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstrtdb.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adstrtdb.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbccnv.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbccnv.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbccnv.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/addbccnv.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adclobconv.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobconv.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobconv.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adclobconv.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adclobtmp.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobtmp.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobtmp.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adclobtmp.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adpreclone.pl
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adpreclone.pl
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adpreclone.pl to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adpreclone.pl
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrobj.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adcrobj.sql
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adchknls.pl
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adchknls.pl
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adchknls.pl to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adchknls.pl
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/ad8idbux.env
dest : /erpp/erppdb/9.2.0/ERPP_avantasia.env
backup : /erpp/erppdb/9.2.0/ERPP_avantasia.env to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/ERPP_avantasia.env
setting permissions: 644
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adupdlib_ux.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adupdlib.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adupdlib.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adupdlib.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrdb.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdb.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdb.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adcrdb.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adsvdb.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdb.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdb.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adsvdb.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adsvdlsn.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdlsn.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdlsn.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adsvdlsn.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adsvdcnv.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdcnv.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdcnv.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adsvdcnv.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbprf.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/addbprf.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbprf.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/addbprf.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbupdgsm.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbupdgsm.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbupdgsm.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/addbupdgsm.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/afdbprf.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/afdbprf.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/afdbprf.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/afdbprf.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbctl.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addbctl.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addbctl.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/addbctl.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addlnctl.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addlnctl.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addlnctl.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/addlnctl.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adlsnodes_ux.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adlsnodes.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adlsnodes.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adlsnodes.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adlnkoh.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/adlnkoh.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/adlnkoh.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adlnkoh.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrdbrdlg.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdbrdlg.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdbrdlg.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adcrdbrdlg.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adautocfg_ux.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adautocfg.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adautocfg.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adautocfg.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrobj.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adcrobj.sh
setting permissions: 700
setting ownership: applerpp:dba
File /erpp/erppdb/9.2.0/dbs/initERPP.ora of type INSTALL already exists, this file will not be instantiated.
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/afmkinit.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afmkinit.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afmkinit.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/afmkinit.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/config_ux.c
dest : /erpp/erppdb/9.2.0/rdbms/lib/config.c
backup : /erpp/erppdb/9.2.0/rdbms/lib/config.c to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/config.c
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcmclean.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcmclean.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcmclean.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adcmclean.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcctclean.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcctclean.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcctclean.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adcctclean.sql
setting permissions: 600
setting ownership: applerpp:dba
AutoConfig Setup Phase
Running Setup Process 1 of 2 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/Apache/perl/bin/perl -I /erpp/erppdb/9.2.0/Apache/perl/lib/5.00503:/erpp/erppdb/9.2.0/Apache/perl/lib/site_perl/5.005:/erpp/erppdb/9.2.0/appsutil/perl /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adchknls.pl
script returned:
Validating information needed for NLS........
DATABASE version : db920
No NLS specific checks required
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 2 of 2 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afmkinit.sh
script returned:
afmkinit.sh started at vie mar 28 00:42:22 ART 2008
The environment settings are as follows ...
ORACLE_HOME : /erpp/erppdb/9.2.0
ORACLE_SID : ERPP
TWO_TASK :
PATH : /erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/erpp/homes/oraerpp/bin:/erpp:/erpp/scripts:/sbin:/erpp/erppdb/9.2.0/OPatch
LD_LIBRARY_PATH : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
afmkinit.sh exiting with status 0
.end std out.
.end err out.
AutoConfig Profile Phase
Running Profile Process 1 of 1 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sh
script returned:
afdbprf.sh started at vie mar 28 00:42:22 ART 2008
The environment settings are as follows ...
ORACLE_HOME : /erpp/erppdb/9.2.0
ORACLE_SID : ERPP
PATH : /erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/erpp/homes/oraerpp/bin:/erpp:/erpp/scripts:/sbin:/erpp/erppdb/9.2.0/OPatch
LD_LIBRARY_PATH : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
Executable : /erpp/erppdb/9.2.0/bin/sqlplus
SQL*Plus: Release 9.2.0.5.0 - Production on Fri Mar 28 00:42:22 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
Updated profile option value - 1 row(s) updated
Application Id : 0
Profile Name : FND_DB_WALLET_DIR
Level Id : 10001
New Value : /erpp/erppdb/9.2.0/appsutil/wallet
Old Value : /erpp/erppdb/9.2.0/appsutil/wallet
Updated profile option value - 1 row(s) updated
Application Id : 174
Profile Name : ECX_UTL_XSLT_DIR
Level Id : 10001
New Value : /usr/tmp
Old Value : /usr/tmp
Updated profile option value - 1 row(s) updated
Application Id : 174
Profile Name : ECX_UTL_LOG_DIR
Level Id : 10001
New Value : /usr/tmp
Old Value : /usr/tmp
PL/SQL procedure successfully completed.
Commit complete.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.5.0 - Production
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Services Phase
Running Service Process 1 of 1 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sh
script returned:
adcrobj.sh started at vie mar 28 00:42:23 ART 2008
Parameters passed are : APPS apps
The environment settings are as follows ...
ORACLE_HOME : /erpp/erppdb/9.2.0
ORACLE_SID : ERPP
TWO_TASK :
PATH : /erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/erpp/homes/oraerpp/bin:/erpp:/erpp/scripts:/sbin:/erpp/erppdb/9.2.0/OPatch
LD_LIBRARY_PATH : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
SQLPLUS Executable : /erpp/erppdb/9.2.0/bin/sqlplus
SQL*Plus: Release 9.2.0.5.0 - Production on Fri Mar 28 00:42:23 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
PL/SQL procedure successfully completed.
Commit complete.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.5.0 - Production
adcrobj.sh exiting with status 0
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig is exiting with status 0
The log file for this session is located at: /erpp/erppdb/9.2.0/appsutil/log/ERPP_avantasia/03280041/adconfig.log
2) netservicehandler
Using java command: /erpp/erppdb/9.2.0/jre/1.4.2/bin/java
JAVA_HOME :
Java version : 1.4.2_02
Classpath : /erpp/erppdb/9.2.0/jre/1.4.2/lib/rt.jar:/erpp/erppdb/9.2.0/jdbc/lib/ojdbc14.jar:/erpp/erppdb/9.2.0/appsutil/java/xmlparserv2.zip:/erpp/erppdb/9.2.0/appsutil/java
===============================================================================
NetServiceHandler 115.38.11586.2 started for avantasia at Fri Mar 28 00:41:23 GMT-03:00 2008
===============================================================================
[ Context Information ]
Host : avantasia
Domain : angra.com
Out Dir : /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041
Tier Type : DATABASE TIER
Getting connection...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Exception occurred: java.sql.SQLException: Excepción de E/S: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=avantasia.angra.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ERPP)))
Exception occurred: java.sql.SQLException: Excepción de E/S: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=avantasia.angra.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ERPP.angra.com)))
Exception occurred: java.sql.SQLException: Excepción de E/S: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
Could not get connection to the database.
Exiting with status 100 to instantiate the tnsnames.ora template
Creation of Directory - /data/erpp/erppdb/9.2.0/network/admin/ERPP_avantasia Succeeded.
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/ad8itns.ora
dest : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia/tnsnames.ora
AutoConfig is exiting with status 0
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/ad8ilsnr.ora
dest : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia/listener.ora
AutoConfig is exiting with status 0
adgentns.pl exiting with status 0
ERRORCODE = 0 ERRORCODE_END
Using java command: /erpp/erppdb/9.2.0/jre/1.4.2/bin/java
JAVA_HOME :
Java version : 1.4.2_02
Classpath : /erpp/erppdb/9.2.0/jre/1.4.2/lib/rt.jar:/erpp/erppdb/9.2.0/jdbc/lib/ojdbc14.jar:/erpp/erppdb/9.2.0/appsutil/java/xmlparserv2.zip:/erpp/erppdb/9.2.0/appsutil/java
===============================================================================
NetServiceHandler 115.38.11586.2 started for avantasia at Fri Mar 28 00:41:56 GMT-03:00 2008
===============================================================================
[ Context Information ]
Host : avantasia
Domain : angra.com
Out Dir : /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041
Tier Type : DATABASE TIER
Getting connection...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Connection obtained
-------------------ADX Database Utility Finished---------------
Connection obtained
NODE_ID Column Availability: true
FND_NODES Snap Shot:
Updating null NODE_IDs
No of rows updated: 0
FND_NODES Snap Shot:
Processing listener.ora
LISTENER ADMIN RESTRICTIONS = OFF
LISTENER PASSWORD ENABLE/DISABLE SWITCH = O

Similar Messages

  • New installation of remiere elements 11 dont start

    Click on Premiere icon produces no visible results.
    Task Manager shows no Premiere tasks.
    Is there anybody who know this problem and can help me?
    Thanks
    Lutz

    These questions below may be for a different product... but the information you need to supply is the same, for the products you use
    More information needed for someone to help... please click below and provide the requested information
    -Information FAQ http://forums.adobe.com/message/4200840
    Especially the exact brand/model graphics adapter, and device driver number
    Display driver http://forums.adobe.com/message/4943624
    Premiere Elements Hang/Crash http://forums.adobe.com/thread/792580
    http://help.adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7d 8a.html

  • Lenovo U310: Clean Windows 7 Installation Guide (including Rapid Start and Caching)

    Hi there,
    this is the first time that I am writing such a guide/tutorial/whatever you may call it – there are probably better ones, but though not being a total computer noob, it took me almost one week to get this pretty (now again) little beast running again. So hopefully this helps some others to avoid such stupid downtimes.
    A brief overview on what has happened to my original win 7 Home Premium:
    As some may know, this laptop is very well usable as a “Hackintosh” called Macbook clone. So that’s what I did. It turned out to be nice, but I wanted to go back to Windows after a while, using a clean W7 Pro installation to start over. Actually an easy task, format all drives, install Windows, be happy. Just as I had been doing this for years. Unfortunately, it turned out to be a real challenge. First, I couldn’t “see” my drives during installation (and thus not install), then I got random errors during installation aborting it at different points and finally rapid start and caching didn’t work. Every time I tried to activate them (after Win installation), it crashed my PC. I even found an (official Lenovo!) guide stating to install W7 on the SSD, which worked, but sucks due to space limitations. Oh and another very nice thing: The SSD showed up during WIN installation (but not the classical hard drive) stating it was about 60 GB. So as you can see, I have had a lot of different tries and errors. Why I didn’t use Lenovo Easy Recover? As said before, I erased all partitions…
    Before we start: If you have a good Windows running on the Laptop, do yourself a favor and disconnect the RAID 0 disks using the Intel Rapid Storage Application before(!!!) proceeding. It will make things much easier. And don’t forget to get all you data on an external drive or something.
    Ok, now let’s start.
    1.)    Prepare a USB Stick with the following driver
             http://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=21730 (choose f6flpy-x64.zip If you’re running a   
             64-bit system (standard nowadays), take f6flpy-x86.zip if it is a 32-bit Windows, just download and copy them
             into the stick’s root directory) and plug this stick in one of the left side USB ports.
    2.)    You’ll need Win 7 on either a DVD (plus external drive, for sure) or (bootable) USB stick
    3.)    Connect your drive/stick (with W7) to the right side USB port.
    4.)    Switch the computer on, immediately hit FN and F2. That will open the BIOS.
    5.)    In the BIOS, navigate to the very right section (“save and exit”) and navigate the cursor to “load setup defaults”.
             Hit enter to approve.
    6.)    After that, go to the “boot” tab and disable UEFI-boot.
    7.)    Next, go one more tab to the left and set the controller setting to RAID (NOT AHCI or Compatible!!!).
    8.)    Navigate the cursor down to “Intel Rapid Start” and hit enter. A submenu will pop up-
    9.)    Disable the first entry in that window, that will make the rest be disabled as well.
    10.) Navigate to the very right tab, this time hit save and exit.
    11.) The PC restarts.
    12.) Immediately hit FN and F12 to open the boot selection menu. Select to boot from your W7 DVD drive or USB
            stick.
    13.) Click yourself through the whole process of installing Windows 7 until the page comes up where you will have
            to select where to install it.
    14.) Click on “load drivers” and after a few seconds your downloaded driver should be there. Click ok to use them.
            Please do this step even if you can see your drives (SSD Disk 0, 32 GB and HDD Disk 1, 465(<-?) GB) as you
            would expect them – otherwise you’re very likely to get an error during the install process.
    15.) Now erase all partitions on both drives and select the HDD as the drive to install W7 to – NOT THE SSD!!!!!
            Seriously, don’t choose the SSD.
    16.) Windows will probably say that some extra partitions are necessary and so on, click ok and install Windows.
    17.) After the installation has finished and you see your Desktop, I suggest you to proceed with the next steps in the
            following order to see as early as possible if you are on the right way.
    18.) Install the Chipset driver, restart.
    19.) Install the Intel Rapid Storage “driver” and check the box where it asks to additionally install the control center.
            Reboot.
    20.) Go into BIOS (FN and F2) and enable Intel Rapid Start (the one you disabled in Step 8 and 9)
    21.) Boot into Windows.
    22.) Click on the Windows button, type cmd and right klick on the cmd.exe, select to run it as Admin.
    23.) Now you’ll create a hibernation partition on the SSD. (which by now should be completely empty as we’ve
            deleted all partitions in step 15)
    24.) In the command prompt that we have just opened, type: (without quotas, for sure)
    “diskpart” and hit the enter button
    “list disk” and hit the enter button
    Now you should see your ssd as disk 0 and your hdd as disk 1
    If your ssd is disk 0 (that would be standard), write “select disk 0”, otherwise write: “select disk 1”, and hit the enter button.
    Now write “create partition primary size=4096” and hit enter again. [if you have 4GB of ram, type 4096, if you have 8 GB of ram, use 8192]
    Now write “detail disk” and hit enter to see the volume number behind the volume that we have just created (it is 4 GB or 8 respectively, should be easy to find), in my case that was “2”
    Now type “select volume 2” if your 4 or 8 GB volume has number 2 as well, otherwise use the number you found out in step f. Hit enter.
    Finally, type: “set id=84 override” and hit enter for one last time.
    It should now say back that the id has been set successfully.
    Exit the command prompt. (close)
    25.) Reboot
    26.) Install the Rapid Start driver. Reboot.
    27.) Open the Intel Rapid Storage Application.
    28.) Click on accelerate and approve the settings. Two RAID’s will be created. Reboot.
    29.) Install the remaining drivers, have fun with Windows Update and that’s it!
    Good luck to all of you… And hey Lenovo - wouldn't that have been your job after all these posts showing your costumers in trouble? Just my two cents...
    If you want, you can now turn on UEFI-boot in BIOS.
    PS: If, after installing all drivers, you happen to see one unknown device in your device manager – this one belongs to Lenovo Connect Software that came with your Laptop. (Updates FB, Email etc when PC is in sleep mode) If you install Lenovo Connect it’s going to be fine, however, I would not recommend it as it is said to use a lot of energy and cause some other problems. So just live with it, your PC is totally fine without it.
    Kind regards from Shanghai

    Seriously guys, I can't use my 3 days old laptop. Some help would be mostly appreciated. At this point, the network connection issue doesn't show up anymore, it's just a blank screen after reboot. I reinstall windows and do it all over again just to achieve the same result.
    Now couple of things caught my attention: as I load the "6flpy-x64.zip" driver from step 14, I get a message saying I need to install signed drivers, because unsigned ones are likely to mess up the system.
    Secondly, I could not find any Rapid Storage Technology drivers for Windows 7 (particularly for U310 model), so I use the Windows 8 ones (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS031455), which seems a silly thing, yet I know of no alternatives.
    Could it be any of these issues to cause my problem? Or smth else? Please help!

  • Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

    premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."   Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

    Jurgen Freund
    Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
    I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
    How to fix the ERROR 126 when you open OpenGL programs - YouTube
    The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
    LoadLibrary failed with error 126: cant find the required
    Please let us know if that worked for you.
    Thank you.
    ATR
    Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

  • Can't start UCM server after new installation of 11.1.1.8 on Microsoft server 2008 R2 SP1 64 bit EE

    Hi All
    After new installation of WCC 11.1.1.8 on Microsoft server 2008 R2 SP1 64 bit EE UCM_server1 can’t start. (Please see trace below). WCC 11.1.1.7 run without issues on this environment.
    Steps:
    1. Installation of jrockit-jdk1.6.0_45-R28.2.7-4.1.0
    2. Installation of WLS 10.3.6
    3. Installation of WCC 11.1.1.8
    4. Schema creation by RCU 11.1.1.8
    5. Domain creation by config.cmd with AdminServer, UCM_server1, IBR_server1
    6. Run Admin - (success)
    7. Run NodeManager (optional) - (success)
    8. Run UCM_server1 – failed
    Still not works after patching MLR 1 for WCC 11.1.1.8 or upgrade from 11.1.1.7 .
    From log files we can saw that problem caused by JniNativeOsUtils.dll file in “<Middleware Home>\Oracle_ECM1\ucm\idc\components\NativeOsUtils\lib\windows-amd64\7.2.1.1”
    I replaced JniNativeOsUtils.dll with same file from 11.1.1.7 version and UCM_server1 starts work
    I got errors during startup (syNativeOsUtilsNotLoaded and UnsatisfiedLinkError - you can foun them in trace below), but WCC up and works.
    I also get error when trying to start SystemProperties or ComponentWithard utility:
         Activation context generation failed for "C:\Oracle\MIDDLE~1\USER_P~1\domains\WCC_DO~1\ucm\cs\bin\SystemProperties.exe". Dependent Assembly      Microsoft.VC80.MFC,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762" could not be found. Please use sxstrace.exe for detailed diagnosis.
    Any ideas?
    Thanks
    Leon
    ERROR:
    javax.servlet.ServletException: Could not start up IDC server deployment.
      at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1268)
      at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
      at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
      at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
      at idcservlet.IdcFilter.init(IdcFilter.java:156)
      at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
      at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
      at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
      at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
      at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
      at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
      at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
      at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
      at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
      at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
      at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
      at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
      at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
      at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
      at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
      at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
      at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
      at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
      at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused By: java.io.IOException: csServletFailedToFullyInitialize
      at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
      at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
      at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
      at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1257)
      at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
      at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
      at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
      at idcservlet.IdcFilter.init(IdcFilter.java:156)
      at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
      at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
      at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
      at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
      at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
      at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
      at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
      at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
      at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
      at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
      at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
      at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
      at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
      at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
      at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
      at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
      at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
      at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
      at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused By: intradoc.common.ServiceException:
      at intradoc.server.IdcServerManager.init(IdcServerManager.java:252)
      at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
      at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
      at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
      at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
      at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
      at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
      at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
      at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
      at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
      at idcservlet.IdcFilter.init(IdcFilter.java:156)
      at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
      at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
      at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
      at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
      at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
      at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
      at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
      at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
      at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
      at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
      at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
      at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
      at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
      at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
      at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
      at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
      at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
      at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
      at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused By: intradoc.data.DataException: !Install aborted.
      at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:554)
      at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
      at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)
      at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)
      at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
      at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
      at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
      at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
      at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
      at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
      at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
      at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
      at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
      at idcservlet.IdcFilter.init(IdcFilter.java:156)
      at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
      at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
      at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
      at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
      at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
      at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
      at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
      at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
      at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
      at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
      at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
      at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
      at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
      at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
      at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
      at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
      at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
      at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
      at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused By: intradoc.common.ServiceException: !csInitSecurityError
      at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:140)
      at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)
      at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
      at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
      at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)
      at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
      at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
      at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)
      at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)
      at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
      at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
      at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
      at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
      at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
      at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
      at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
      at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
      at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
      at idcservlet.IdcFilter.init(IdcFilter.java:156)
      at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
      at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
      at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
      at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
      at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
      at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
      at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
      at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
      at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
      at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
      at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
      at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
      at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
      at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
      at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
      at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
      at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
      at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
      at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused By: intradoc.common.ServiceException: !syFileUtilsUnableToCreateSpecifiedDir,C:/Oracle/MIDDLE~1/USER_P~1/domains/WCC_DO~1/ucm/cs/config/private
      at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:570)
      at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)
      at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)
      at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)
      at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:76)
      at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
      at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
      at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:574)
      at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
      at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
      at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)
      at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)
      at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
      at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
      at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
      at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
      at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
      at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
      at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
      at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
      at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
      at idcservlet.IdcFilter.init(IdcFilter.java:156)
      at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
      at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
      at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
      at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
      at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
      at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
      at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
      at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
      at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
      at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
      at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
      at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
      at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
      at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
      at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
      at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
      at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
      at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
      at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused By: java.lang.AssertionError: !syNativeOsUtilsNotLoaded
      at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:452)
      at intradoc.common.NativeOsUtilsBase.<init>(NativeOsUtilsBase.java:360)
      at intradoc.common.NativeOsUtils.<init>(NativeOsUtils.java:28)
      at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)
      at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)
      at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)
      at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)
      at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)
      at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
      at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
      at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)
      at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
      at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
      at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)
      at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)
      at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)
      at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
      at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
      at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
      at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
      at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1257)
      at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
      at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
      at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
      at idcservlet.IdcFilter.init(IdcFilter.java:156)
      at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
      at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
      at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
      at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
      at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
      at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
      at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
      at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
      at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
      at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
      at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
      at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
      at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
      at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
      at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
      at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
      at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
      at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
      at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused By: java.lang.UnsatisfiedLinkError: intradoc/common/NativeOsUtilsBase.getNativeVersion()Ljava/lang/String;
      at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:448)
      at intradoc.common.NativeOsUtilsBase.<init>(NativeOsUtilsBase.java:360)
      at intradoc.common.NativeOsUtils.<init>(NativeOsUtils.java:28)
      at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)
      at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)
      at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)
      at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)
      at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)
      at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
      at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
      at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)
      at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
      at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
      at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)
      at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)
      at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)
      at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
      at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
      at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
      at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
      at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1257)
      at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
      at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
      at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
      at idcservlet.IdcFilter.init(IdcFilter.java:156)
      at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
      at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
      at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
      at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
      at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
      at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
      at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
      at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
      at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
      at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
      at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
      at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
      at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
      at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
      at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
      at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
      at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
      at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
      at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Hi All
    Cause of the problems was the missing of "Visual C++ 2005 SP1 Redistributable Package"
    Environment works fine after installation of both versions (x86 and x64)
    Thanks
    Leon

  • I want to wipe my computer clean and start with a new installation of Lion

    My MBP has been acting strange.  I want to wipe it completely clean and start with a brand new installation of Lion.  How do I do that?  I know I can access the recovery partition by pressing 'Command+r' during the boot process.  However, do I need to use the disk utility option first and erase my internal hard drive?  Then do I use the new lion instal option?
    Or if I choose the new lion isntallation from the recovery partition, does it erase my drive first?
    -jon

    What error?
    The sync is one way - computer to iphone.  The only exception is itunes purchases.  File>Transfer Purchases
    It has always been very basic to always maintain a backup copy of your computer.  Have you failed to do this?

  • When I clicked on Firefox, the update bar started but when it stopped Firfox would not open. The blue screen of death popped up and said something about a new installation. We restarted the computer and now Firefox will not open. Help!

    When I clicked to open Firefox the update bar appeared and an update loaded. Usually when this happens Firefox will open up when the update is finished. This time it did not open. when I clicked on the icon again the blue screen opened and said something about a new installation and if this was the first time you have seen this screen restart your computer and try again. I restarted the computer and when I clicked on the Firefox icon the "hour glass" would appear like it was trying to open but it never would open. I don't know what else to do.

    See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it

  • EVERY time I start Thunderbird, a new installation window opens

    Every time I open Thunderbird a new installation window (file extraction) opens as well. Whether I proceed through to finish or cancel, the result is the same. Thunderbird appears to be working normally in every other way, but this window opens each and every time I open a new session - please help!!!

    Hey There Christ1 -
    The target ended up being right, so I disabled addons and renabled them one by one hoping I would find the problem. As it turned out, when I finally got down to ReminderFox (one of my faves :-( that one triggered this reaction every time, so unfortunately until the developer comes up with a fix for that, I've just kept it disabled... Thanks again for your help - and anyone else who may be having this problem, try disabling this add on for now (bummer)!
    Thanks again everyone!
    tls

  • How to use Intel Rapid Start technology on my ThinkPad Edge 531 computer?

    I have a Thinkpad Edge 531 (model 6885-73G) preloaded with Windows 7 64bit. According to the appropriate user guide (see Thinkpad E531 User Guide - page 108) and chipset specifications Mobile Intel® HM77 Express this ThinkPad model supports Intel Rapid Start Technology with a special partition on the SSD M.2.Such an SSD with the specification M.2 (see MyDigitalSSD Super Cache 2) I bought it and installed successfully on my ThinkPad, which can run a cache software FNet HybriDisk on.
    However, even if I proceed exactly according to the installation script by Intel, see (Intel Rapid Start Technology User Guide) or by the installation script by Lenovo community, (see Edge E330 and Intel Rapid Start), I can not put into operation Intel Rapid Start Technology on my ThinkPad, although I use the installed SSD disk with an alone partition of appropriate type (with ID type 84 on MBR) with more allocated space than the size of RAM for my ThinkPad and with the currently deployed version of BIOS (1.29) and current drivers, such is Intel (R) Rapid Storage Technology Driver version 11.1.5.1001 downloaded from the webiste of Lenovo support for this model ThinkPad Edge 531.
    Since, in my opinion, based on the above specifications declared by the manufacturer Lenovo and Intel, this ThinkPad model should support Intel Rapid Start Technology, I would like therefore to know how this technology on my ThinkPad to put into operation, because of which I also bought this ThinkPad model. Does exist for this model ThinkPad Edge 531 some specific deployment scenario of Intel Rapid Start Technology? Does anyone have any practical experience with the launch of this technology on those ThinkPad models? Can it be expected that the full support of Intel Rapid Start Technology for the ThinkPad Edge 531 will occur after the release of a new version of the BIOS or a new version of Solid State Drive Firmware Update Utility with support for MyDigitalSSD Super Cache 2 published on the website of Lenovo support?
    Thanks in advance for any advice and guidance with the launch of Intel Rapid Start Technology on my ThinkPad Edge 531.

    Hi @nmulji ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY TouchSmart 15t-j000 Notebook and issues with Raid technology. Here is a link that helps with the driver for your Notebook.
    You might need this update for software and drivers with the Intel Management Engine Interface.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase. If something is not updated this could be causing an issue.
    Please let me know how this goes.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Intel Rapid Start (30 Day Standby) with 32 GB RAM

    Recently I bought new W540 with 8 GB RAM. Intel Rapid Start operated normally in this configuration. But when I upgraded RAM to 32 GB it hangs the laptop on second resuming from S4. I've done all the procedures to set it up properly: hibernation partition (35 GB) with id=84, latest drivers and so on.
    So first time it goes to S3 (sleep), then S4 (hibernation by Intel Rapid Start) and successfully resumes from S4. Second time it goes to S3 and S4 too, but on resuming I see just black screen and blinking power button. This goes infinitely so I have to power off the laptop pressing power button for about 5-10 seconds. In case "Automatically restart" option is enabled in "Startup and Recovery" options, the laptop is just turns off.
    So it is a system failure. When I boot the laptop after the failure, I see something like this in the system event log:
    The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x0000000000000000, 0x0000000000000002, 0x0000000000000008, 0x0000000000000000). A dump was saved in: D:\MEMORY.DMP. Report Id: 080114-229025-01.
    I reproduced this behaviour in the factory installation, installed all Windows updates, updated Lenovo Power Manager, updated BIOS firmware, disabled all non-Microsoft services in msconfig, uninstall Lenovo Power Manager and install original Intel Rapid Start software (to test pure Intel technology). I reproduced the bug after every change described above. Next, I try two another RAM configurations: 16 GB and 24 GB. With 16 GB it operates normally, with 24 GB the problem reproduces.
    Model: 20BG0035RT
    OS: Windows 7 Professional SP1
    RAM: Kingston HyperX DDR-III SODIMM 16Gb KIT 2*8Gb PC3-12800 CL9 (KHX16LS9P1K2/16), successfully passed full test by F10

    Sorry if this thread is too old, but this keeps bugging me so I'm bumping and responding.  I have the same issue with 32GB of RAM where I can resume once after a reboot, then the system won't quite power on on the second resume cycle. I've noticed that if I hibernate the system, I can also use Rapid Start once again.  So I can alternate between a (slightly slower) hibernate resume and a (slightly faster) Rapid Start resume Of course, it seems like a pretty silly use of HD space to maintain both a 16gb hiberfil.sys and a 32GB hibernation partition.
    The problem doesn't exactly seem like it should be RAM related, but rather something about the system powering up again following a successful IRSRT resume cycle.
    I can't figure out what's causing it but it keeps frustrating me!  There do seem to be other systems that handle the 32GB of RAM so there must be something with the BIOS implementation in the W series. I don't think it's a limitation of the software.

  • My new mac mini (3 month) didn't start up,all that appeared was a white screen and a flashing folder with a question mark inside it.

    My new Mac mini (3 month) didn't start up, all that appeared was a white screen and a flashing folder with a question mark inside it.
    I followed by recommendations from 'Everything Mac': "shut it down by pressing and holding the power button for about 5 seconds.
    Then hold down the Option key and press the power button again to start up the Mac mini. Keep holding down the Option key until
    the Mac mini starts up."
    But I got a Wi-Fi button only to chose and connect the local network. I connected to my network and I can't use this connection
    becouse no icons.
    Could you please help me?

    Your Mini (running 10.6.4) should have come with grey-colored install disks. Now is the time to put them into service. Turn on your computer so that there is power to accept disk #1 into the optical drive. Once  the disk is in the drive, shut off the computer by holding the start button down until it powers off. Then turn it on this time holding down the "C" key to make the computer boot from the disk. The question mark that you saw indicates that the computer cannot find a bootable volume. This can happen due to corrupted system files or an improper shutdown etc. Once you are in the "Installer" you can choose Disk Utility from the Utilities Menu in the menu bar. Use it to repair the disk and to see if that can solve your trouble.  

  • SB live 5.1 not working even with original new installation cd.Pls H

    Hi,
    I have purchased just last week a brand new PC with intel 95 chipset asus mbd P5-GL-MX having on -board azalia sound component.Along with just got box packed Li've 5. sound card. This has in pack original installation cd.after installing card and everything when i try to run installation cdit says "No sound card installed please insert soundblaster ".i have os win Xp with sp 2 now after investigating through all the post in this forum i have tried everything but yet not succeeded.My message to moderator and compny personnel is that even the new installation cds does not have solution for such problems than if they knew its difficult they should insert small notes atleast that givena hassle free installation so we dont hvae to go and start hunting for the solutions.i was great fan of creative but this has revealed their true face.My final request is atleast provide the working solution for my problem.Expecting prompt action.
    thanks
    Manish

    First of all you need to get into the setup menu when the computer is turned on. Hit the del key and it should bring up that menu. DO NOT CHANGE ANY SETTINGS NO MATTER WHAT!! Look for the sound settings which are usually hidden clear at the bottom of the menu on one of the settings. It shoud say onboard sound enabled. You have to use the arrow keys since the mouse doesn't work in the menu so don't try to use it. Now when you find the onboard sound you have to disable it in order for the new card to be recognized. If you got the motherboard book with the system then read it. It shows how and where to look for this setting. Good Luck
    Message Edited by Smokey53 on <SPAN class=date_text>07-9-2005 <SPAN class=time_text>08:07 PM
    Message Edited by Smokey53 on 07-9-2005 08:0 PM

  • Problems with new installation of iAS on Windows

    This is a new installation of iAS 10.1.2.0.2 on Windows. The application server doesn't come up properly after reboot. The log file D:\Oracle\ora101_infra\opmn\logs\OC4J~OC4J_SECURITY~default_island~1 contains an error stack that begins with:
    SSO: DB Error. Please make sure the database is available and restart SSO Server
    Obviously, the database (service name OracleServiceIAS472F) is started after the rest of the services (service names similar to Oracleora101_XXX). I have found documentation on how to make the ProcessManager service of the OracleAS Infrastructure before it starts up the ProcessManager service of the middle tier, but no notes on starting the database service in an order different from Windows default. Extensive googling doesn't give me that others have had similar problems. I would like to verify before starting to mess around with the order of services starting at boot time.
    The person doing the installation (I don't have direct access to the machine) maintains that installation of WebUtil is causing these problems, and that the problems disappear if he reverts the configuration of WebUtil. I have limited experience with forms configuration and cannot see the connection.
    Any input would be greatly appreciated!
    Regards,
    Maria

    Maria, we have numerous installations of both 10gDB 10.1.0.5/10gAS 9.0.4.2 and 10gDB 10.2.0.3/10gAS 10.1.2.0.2 here. The environments are all two server configurations: 1 server has DB + AS Infrastructure, 1 server has AS Middle Tier. I have not had an issue with a DB server reboot causing the Infrastructure to not come up, although we have a strict rule of always rebooting these two servers in pairs: first DB then AS Middle Tier. And since there are gazillion MS patches, they do get rebooted frequently. Regards, John

  • Oracle APP'S Installations Context Value Management Could not started

    oracle APP'S Installations Context Value Management Could not started
    how it is started

    Fadi, Context Value Management runs during Rapid Install or AutoConfig to make sure the context file is in good order. If it fails at the time of the installation, then most probably you have missing components at the OS level.

  • Essbase 11.1.2.1 New Installation- Cannot configure Essbase Server

    Hi,
    After uninstalling EPM-System 11.1.2.0 and clearing the registries as much as I could; I tried to install Essbase Server 11.1.2.1 on a Windows 2008-R2 64bit platform. The installation went smoothly and I could configure the Hyperion Foundation tools.
    However on the Epm-Configurator, "Configure Essbase Server" section appears read only. Therefore I could not configure the Essbase server. I also cannot start the Oracle Process Manager service as the file OPMN service path directs, does not exist in the directory. In fact I seem to have only "Admin" file under the Oracle\Middleware\Ohs
    Any idea why I encounter such issue although the installation seems to be succesful?
    Thanks.
    Edited by: 857072 on 14.Haz.2011 07:15
    Edited by: 857072 on 14.Haz.2011 07:20

    I have found the solution following this link : Unable to configure Essbase on new installation
    I don't know exactly what did the trick but here are the changes I made before it worked:
    - I have changed the total paging file size
    - Extracted the Additional Content again
    - To install, I chose the Run as Administrator option.
    - First I installed and configured only Foundation Services, later I installed the other components.

Maybe you are looking for