New Installation of OEM just closes after Username/Password entry

My database server adminstrator created database for me and migrated the data from another server.
When I try to open it using the OEM version 10g, I find my database as listed in the tnsnames file, get prompted for the Username and Password, but then the OEM closes. No message at all.
What can I check?
John

hcjl wrote:
Duka wrote:Well, I think you should remove some "#" in mirrorlist to enable server, and then you will be able to upgrade.
take a closer look. he has enabled a couple of servers.
My bad. Didn't saw those enabled servers.

Similar Messages

  • Many websites, such as stories on Yahoo! just close after only ten seconds or so....it is maddening....only happens on my little Acer netbook running Windows XP.

    It happens all of the time when I am trying to read stories on Yahoo.

    Hello, Bee, thanks for responding -
    1. 103.98GB free of a 200GB drive (I use an external 1TB drive for data storage; the internal drive is strictly for software).
    2. Yes, but I think I've noticed occasional up/down loads which would transmit with no response, delay 5-15 seconds, retry maybe a few times (delaying each time) before re-establishing the connection, then continuing the transfer normally. (took 25min to download/install the 600+ MB 10.5.5 Combo Update)
    3. Yes, and the cable company says everything seems to be working fine, which seems to be verified be speedtests (~3250 Kb/s down, ~305-325 Kb/s up). The ISP was the first thing I checked, since I had been downloading so many movies - I thought perhaps they had placed me on a restricted speed limit.
    4. Nope, just spent a lot of the past two weeks making sure I've got all the latest and greatest. My brand new MacBook Pro was just purchased back in the Jun/Jul timeframe, and I experienced a GLORIOUS time of awakening until this happened. ---Sorta like getting a new super-Ferrari, and finding after a few months, it's now running on just two cylinders with the parking brake always on.
    5. Yes, a Unix/Linux product called LimeWare which uses the Gnutella network to share video/audio, running only under 10.5.5 Leopard, but none under Windows (which I seldom even boot more than a couple times per month)
    6. Never heard of it, but I just checked, and found no duplicates.
    Any more ideas/suggestions? It's EXTREMELY frustrating when you are accustomed to blink-of-an-eye responses, but they now take from 1-to-8 minutes each.
    Rog

  • I'd like to manually add a username/password entry to a bookmarked page that requires one but Firefox never asked if I wanted one. How do I do that? Thank you!

    For some places that I visit on the Web, usernames and passwords are required. For some of those, Firefox has asked if I wanted that info remembered, and for some of them it did not ask. For those, I have to manually enter my username and password information manually every time. This is a pain. Is there a way to manually add username/password info for a site into the password manager? I know I can delete one that is already there, but I want to add a new one. Failing that, is there a way to force Firefox to ask the question about remembering? Thank you very much!

    The Saved Password Editor extension has a feature that allows you to manually add a username & password for domains that block Firefox from offering to save the username & password. <br />
    https://addons.mozilla.org/en-US/firefox/addon/60265

  • New installation oADE opens but closes with error when I click any item, not prompting to authorize

    I am on Windows xp have have lastest flash installed and have AdobeID
    Installation went as expected, but when I launch the program, any click on its item, causes the program to close with and error and want to report to MS.
    This is the text from the report
    EventType : clr20r3     P1 : digitaleditions.exe     P2 : 2.0.0.0    
    P3 : 5058357c     P4 : presentationcore     P5 : 3.0.0.0     P6 : 4f7e7142    
    P7 : 1710     P8 : dd     P9 : system.argumentoutofrange   
    I have run though all the recommended IE settings and cannot fix this behaviour.
    Some help someone?

    Try uninstalling and installing v1.7.2.  This works more reliably in various ways.  Several people have reported issues with V2.0 on XP.
    Version 1.7.2 is a little difficult to find,
    available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editio ns.html
    also for PC at http://www.tucows.com/preview/853736/Adobe-Digital-Edition-For-EBooks

  • Firefox is now closing unexpectedly shortly after I open it. There is not even enough time to click on help, then disable ad-ons. I also don't receive any error messages. It just closes after a few seconds. Help! Don't want to use other browsers.

    I came here to post because it seems my question wasn't posting when simply clicking on "ask this question".

    I think in the circumstances, an uninstall/reinstall is called for. Please follow these instructions.
    Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0] and download a fresh installation file using IE8 or 9 and choose to save it to your desktop when you see the prompt.
    Then go to Add/Remove Programs, scroll down to '''Mozilla Firefox '''and remove it, choosing to keep your bookmarks, customizations etc., (don't checkmark the box).
    Then reboot and delete the folder called '''Mozilla Firefox '''at this location: ''C:\Program Files\Mozilla Firefox''
    Finally run the installation file you downloaded to the desktop earlier.
    Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

  • Creative cloud update fails on mac OSx. New installation is not possible, even after deinstalling creative cloud desktop. What can I do?

    The last update for creative cloud fails. Deinstalling and new download fails also. The download stop at 45%. What can I do? Using Mac OS X Maverics.

    I got this error.
    Hey I'm having the same problem.
    "Adobe Creative Cloud is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of the Creative Cloud from 'http://www.adobe.com/go/adobecreativecloudapp'."
    I did nothing to cause this.

  • When I go to play an app it just closes after 10 seconds

    I click on the app and then it loads up and then the screen goes black and goes back to the main menu help?

    Try to reset the iPod by holding the sleep and Home button for about 10sec, until the Apple logo comes back again. You will not lose data doing a reset.

  • How do you login to OEM - What is the username/password?

    Hi everyone:
    I installed Oracle9i Application Server on Windows 2000. The install was successful and I was able to install the database infrastructure as well as the complete options (forms, reports, portal, wireless, etc.) options for the application server. I tried to logon to the Enterprise Manager Website to change some settings in my database but could not log on. I get the welcome screen (connection is fine with the default port settings) but it asks me for a login username and password. I tried the traditional sys, system but I get no where. What does the defualt installation assign in order to gain acess to the OEM website?

    Hi Jafar,
    I too facing the same problem.My enterprise manager connected with sysman/oem_temp after that i changed the password. From the OEM when i click monitor 9IAS, its asking for the network password in the browser.
    Please let me know when u find a solution. Thanks in advance. [email protected]

  • New installation -v- upgrading

    Would I be better off doing a clean install of Snow Leopard instead of upgrading on my iMac and MacBook Air, both 6 weeks old. As I am new to the world of Mac I already have my documents on a 3rd party disk drive, so I have no issues other than installing a few programs such as iWork.
    Would I benefit more to clean install?

    akcarrington wrote:
    Would I benefit more to clean install?
    You should know that Apple recommends the default install method, which is not what most users call a "clean" install unless the target volume has no OS on it -- for instance, if it is erased or reformatted. Among experienced Mac users, there is no consensus of opinion if a 'clean install' is better or worse, prudent or a waste of time, or whatever.
    My own opinion is that among those that recommend a clean install of some sort, many are basing their opinions on the old (& no longer entirely applicable) install methods of pre-Snow Leopard installers or on vague ideas about "old bits & bytes" that should be purged from the drive that would otherwise somehow cause problems with the new OS. Some just seem to prefer a "hands on" approach or trust their own skills & understanding about what to install more than they trust the programming built into the new installer. Many just don't like the idea of any unused files taking up hard drive space.
    However, some reasons are more specific, suggesting a clean install is necessary in certain circumstances, for instance when the HD has formatting or file system problems, & that in effect it is better to be safe than sorry, since users might not know these problems exist.
    If this was all there was to it, then it would unquestionably be the best general advice. But it isn't.
    For one thing, the new installer has built-in features that depend on a previous installation to decide what to install, such as Rosetta, QuickTime Player 7, & some print drivers. For another, the installer will move certain incompatible applications from an existing installation to an "Incompatible Applications" folder. It also checks the target disk (much like Disk Utility's "Verify Disk") & "phones home" for Leopard-to-Snow Leopard compatibility updates. These steps can be done separately by knowledgeable users & to some extent can be considered no more than conveniences, but that is what many users like about Macs vs. PC's, so that should be taken into account on a user by user basis.
    More importantly, a clean install requires recreating or migrating existing system & user settings & such, sometimes manually, & this is both time consuming & potentially a source of errors or unnecessary hassles, especially among less knowledgeable users.
    My advice is to consider both the pros & cons of a clean install & decide what is best for you.

  • Cisco aironet access-point keep asking username/password

    Hi all,
    Some of my access-points (Light Weight) just keep asking username/passwords when accessed through web and clicked on any option available there. Any idea why that happens?
    Thanks in advance!
    Gaurav

    Some of my access-points (Light Weight) just keep asking username/passwords when accessed through web and clicked on any option available there.You sure it's LWAP?  The reason why I'm asking because you would NOT be able to access an LWAP over HTML because it's LWAP.

  • Network card not found after new installation [SOLVED]

    I broke my filesystem on my Asus UL80V series laptop in trying to solve problems related to the latest glibc update, so decided to do a clean re-install. I had an installation disk at hand: 2009.08 with kernel 2.6.30.4-1 (which is supposed to have the module for my ath9k network device). However after a successful installation (including all the files from base-dev), my network device is not recognised:
    dhcpcd: eth0: interface not found or invalid
    although network connectivity (wired and wireless) worked perfectly before the installation attempt.
    This happened yesterday (17th) and I have been scouring the web since trying to find out what the cause of this problem is, without luck.
    I also burned a new installation CD with the latest stable version, but no luck there, either! Got a message at the beginning informing me that the install requires 64 Mb memory, although my laptop has 4 Gb.
    I should say, the device is there and working:
    lspci | grep Net
    gives
    02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    I also did
    modprobe ath9k
    just to make sure. No luck.
    Any help will be appreciated.
    thanks
    thea
    Last edited by thea (2012-07-23 23:59:16)

    Argh, ip may not be around in the 2009 image really ;-) .. Use "ifconfig" instead..
    But: I meanwhile cross-checked your ath9k: http://wireless.kernel.org/en/users/Dri … h9k_driver
    and it does not sound encouraging for the kernel you have there.
    The image is far too old anyway, if you ask me (would be a darn hazzle to get that uptodate I am sure). Pity you get that memory error with the 2011 one. Maybe check forums on that. Sounds very strange, I am not aware of any post I read.
    If you can burn another CD, you can try the recent ISOs as well: http://releng.archlinux.org/isos/
    Beware that the ones from July dont have the AIF setup anymore.

  • When I open Muse, I get a message that a new update is available.  When I hit install it just closes and nothing happens.  Then I got a message  I needed Adobe Creative Cloud App to resolve the issue.  I downloaded a copy of Creative Cloud desktop but it

    When I open Muse, I get a message that a new update is available.  When I hit install it just closes and nothing happens.  Then I got a message  I needed Adobe Creative Cloud App to resolve the issue.  I downloaded a copy of Creative Cloud desktop but it says that my Muse is up to date.  It was last updated in May but you have a new update today and it will not update.  I thought maybe I am not suppose to have the Creative Cloud update because all I have is the individual app Muse and the photography program.  So I uninstalled the CC desktop.  Then when I open Muse it says I need the CC desktop to help with the update.  So I get stopped either way.  Now I also had a Pre-Release Muse on my computer and I don't know if that complicated things.  Please advise.

    All future installs/updates of Muse (and most other Adobe apps) are through the Creative Cloud desktop app. Thus you do need to have it installed.
    Are you on Windows or Mac? What OS version?

  • Adressbook after new installation of 10.6.8. crashes after new entry

    I made a brandnew installation of Mac OS X 10.6.8 (Snow Leopard) on my iMac Intel [Model iMac 6,1, Intel Core 2 Duo, 3GB, Boot Rom IM61.0093.B07]. Now my adressbook doesn't work correct anymore. I did re-import the back up. When I want to add a new adress, save it or just close the application, the adressbook crashes.
    I've already tried to reinstall from the original DVD. I also read, maybe the system-font's might cause this problem. I also tried to copy the old fonts back and also tried a new installation. It still doesn't work.
    It would be great to find a solution to this problem.

    Update:  Booted into single-user mode, checked disk via fsck -f (had to force it), no problems found.
    Booted with Snow Leopard installer CD and ran Disk Utlity - repaired permissions and repaired disk.  No problems found.  'Macintosh HD appears to be OK'.
    Tried booting again - still hanging.  Will let it go longer this time, but I'm not hearing any disk activity...

  • Satellite L500-126: Win7 upgrade -can I re-activateit after new installation?

    I successfully upgraded Windows 7 from my OEM Vista yesterday.
    What if in the future, I need to reinstall the whole system?
    Can I re-activate Win 7 after the new installation?
    PS. My OEM Vista is 64 bit version and my win 7 is the ultimate 64 bit upgrade version
    THX

    I hope I understand your question right so here is what I know about it:
    When you upgrade original preinstalled Vista you don't need to activate Win7 but if you make clean Win7 installation then you must activate preinstalled version.
    With other words to have activations-free Win7 you must install Vista at first using Toshiba recovery DVD and then upgrade it to Win7.

  • [SOLVED] GPGME error after chrooting for new installs

    There is another thread about this topic, but it is marked as solved. But obviously this error is not solved because new installs are failing.
    The problem: after installing the base system with pacstrap and chrooting into the system, there are some very ugly errors when trying to install any additional packages.
    Pacman gives the following output:
    warning: GPGME error: Invalid crypto engine
    File XYZ is corrupted (invalid vor corrupted package (PGP signature)
    Do you want to delete it?
    Since i installed arch just a few days ago on the same system with different SSD, this error seems to come from the server side. But i am no expert at all, so i have no idea what's wrong.
    I tried to delete the etc/pacman.d/gnupg folder and running pacman-key --init, but this is not working.
    Last edited by tumas (2014-01-13 18:37:18)

    Update the system from the install disk with pacman --root <mountpoint> -Syu. The problem is that you installed at exactly the wrong time, when all of the packages that use gcrypt were updated but libgcrypt wasn't.
    Last edited by Scimmia (2014-01-13 18:29:37)

Maybe you are looking for