New installation : password of enterprise user
Hi SApers,
I have installed SAP E-Sourcing 5.0.
Now I try to configure the application.
The installation guide references two userids : system and enterprise.
The password for system is well known. (repeated at least 10 times in the guide)
But no sign of the "enterprise" password.
I need it to continue the customization.
Any help should be welcome.
Eric
Edited by: Eric Dupuis on Jul 14, 2008 4:04 PM
Hi Eric
Please open an OSS message against the on-premise license that you hold
The Enterprise manager access is provided directly from there
I had seen a note earlier, dont remeber the number though, it had a mention of this.
Cheers
tridip
Similar Messages
-
So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?
Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart. -
What is the password for 'oracle' user created during XE installation?
Hi,
What is the password for 'oracle' user automatically created when XE is installed?
I installed XE on Linux and it's created under 'oracle' user, but I don't know 'oracle' password. So, I cannot stop TNS listener.
During configuration, it prompted me to enter SYS and SYSADMIN password but it didn't ask me to enter 'oracle' user password.
Please let me know or point me to the document.
Thanks,
NHi Jari,
I tried your suggestion, but it didn't work unfortunately.
When I type (sudo su -oracle) as follows, it still prompts the password. When I hit Enter key w/o anything, it seems to proceed and the prompt shows up in the following line. So, I thought it was successful, but when I checked 'whoami', it's not logged in as 'oracle'.
So, I created the password for 'oracle' and logged in as 'oracle' using a new password. Then, I stopped TNS listener to uninstall XE.
It would be nice if it's documented in XE document somewhere... since it's created by XE installation, I assumed some kind of default password was used.
Thanks,
N -
Enterprise User Security, How do I store the DB password somewhere else?
Hi Guys,
I'm running Oracle 11gR2 and OID 11gR1.
Right now I have enterprise user security working, however I would like to decouple Apps / Directory password from the DB password in OID.
I understand that I can stick the password in orclpasswordverifier.
I have tried to add a new Password Verifier in OID, set up the appropriate appID in the password verifier, added the orclpasswordverifier.<appid> = password into my user but the set up refuses to go to orclpasswordverifier.<appid> it still uses the value of userpassword and orclpassword. I have also read the manual like 5 times.
I've even tried to move the Password Verifier around, to root DBSecurity context, to my domain's context, swapped around the appid value, but no matter what it doesn't seem to work.
Any advise please?I could able to find out the solution for the first item by looking at the forums and some documentation.
We can specify the some part of the URL in the cgicmd.dat file as a key value pairs, which is located in <Oracle-Home>/reports/conf
testreports: userid=scott/tiger@ORCL destype=CACHE server=ust %*
Here the key is -- testreports
Now new URL to access the report like
http://localhost:7778/reports/rwservlet?cmdkey=testreports&report=sample_report.rdf&desformat=pdf&p_from_date=02-MAY-2006&p_to_date=03-SEP-2006
You can see that Key is passed as cmdkey=testreports
Please do remember that you have to append %* at the end of the key, this will allow part of the Key specified in the config file and part will be supplied in the URL
Madhu -
I re-set password using specific user ID but when I put new password in it does not say incorrect password it just spins and spins never accepting it. What is the problem?
Update on my problem connecting in Itunes with my Airport Express. Not sure if anything I tried made a difference
but I finally got the Pop up window saying this device requires a Password. I entered the password and I can once again use the Airport Express as a remote speaker. -
New-OfficeWebAppsFarm : Logon failure: unknown user name or bad password.
Hi,
Recently we bought windows server 2008 r2 from myhosting.com . I tried to install office web apps 2013 on this machine. I followed this URL(http://technet.microsoft.com/en-us/library/jj219455.aspx)
to configure office web apps 2013 in the machine. After installed the office web apps 2013, I created the Office Web Apps 2013 Server farm in the machine using power shell command.
New-OfficeWebAppsFarm –InternalURL "http://vps1141344" –AllowHttp -EditingEnabled
When I run the command on power shell I got the below error
New-OfficeWebAppsFarm : Logon failure: unknown user name or bad password.
At line:1 char:1
+ New-OfficeWebAppsFarm –InternalURL "http://vps1141344" –AllowHttp -EditingEnable ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [New-OfficeWebAppsFarm], AuthenticationException
+ FullyQualifiedErrorId : System.Security.Authentication.AuthenticationException,Microsoft.Off
ice.Web.Apps.Administration.NewFarmCommand
Please help me some one to fix this issue.
Thanks,
Nattuthurai
Nattuthurai.Khi, I encountered the same error with you,
i resolved the issue with following steps:
1. add you Office Web Apps server to domain;
2. login Office
Web Apps server as domain user;
3. run power shell as administrator;
4. run shell command;
5.success.
白云谦逊的站在天之一禺，晨光给他带上了彩霞。。。 -
Enterprise User Security and Password Policies
Hi!
I'm testing Enterprise User Security. Till now everything has gone ok, I can connect to my db using oid users.
Now I'm configuring OID password policies for my realm but it seems that these are not applied when I connect through db. For example, I can try to logon with a wrong password as many time as I want, although in policies a limit of three is set.
Is this correct?!If you're not using DB 10.2 this is the "expected" behavior for the DB. See also metalink note 351170.1 "Enterprise Users Can Connect to a Database when the OID Account is Disabled"
regards,
--Olaf -
Installation problem with Enterprise Manager Console
When i am installing 10G database installation was failed at configuring DBConsole. later from OUI(Oracle Universal Installer) i uninstalled Enterprise Manager Console. my Question was how to reinstall the Enterprise Manager Console alone?
When i am trying to install from OUI. it is not allowing me to install Enterprise Mager Alone (stating Database is mandatory) .
for more information on dbconsole failure you can refer following log file
Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log.
Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:33 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:33 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: DBSNMP
Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: Embarq
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: Embarq
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: Embarq
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 1923985629
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYSMAN
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:39 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:40 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks performReposChecks
WARNING: 'shared_pool_size' must be greater than or equal to 80 MB.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: Embarq
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml has been copied to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 agentHome: null isCentral: false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 isDBC: false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 isDBC: false
Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to D:\oracle1\product\10.2.0\db_1\oui
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [D:\oracle1\product\10.2.0\db_1]
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME D:\oracle1\product\10.2.0\db_1
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file D:\oracle1\product\10.2.0\db_1\install\staticports.ini
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: D:\oracle1\product\10.2.0\db_1:H1B-6F175-9JVJ.GDNINDIA.COM:null:Embarq:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_Embarq value: 3938
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_Embarq value: 1158
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_Embarq value: 5540
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_Embarq value: 5520
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for SID: Embarq : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully granted priviliges to dbsnmp.
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocked mgmt_view account
Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully unlocked relevant accounts
Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYSMAN
Sep 27, 2007 3:22:49 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:23:07 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Finished executing emreposoutofbox.sql
Sep 27, 2007 3:23:07 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.EMDBCConfig updateEmomsProps
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties ...
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.EMDBCConfig copyOC4JDir
CONFIG: Copying OC4J config files from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\application.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\application.xml
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\data-sources.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\data-sources.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\global-web-application.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\global-web-application.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\internal-settings.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\internal-settings.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\java2.policy to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\java2.policy
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jazn-data.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jazn-data.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jazn.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jazn.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\mime.types to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\mime.types
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\oc4j-connectors.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\oc4j-connectors.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\principals.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\principals.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\server.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\META-INF
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\META-INF\MANIFEST.MF to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\META-INF\MANIFEST.MF
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\application-deployments\default\defaultWebApp
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\application-deployments\default\defaultWebApp\orion-web.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\application-deployments\default\defaultWebApp\orion-web.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMDBCConfig copyOC4JDir
CONFIG: Finished copying OC4J config files
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMAgentConfig updateEmdProps
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties ...
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMAgentConfig updateAgentConfigFiles
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties ...
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getLocalListener
CONFIG: Using specified listener name: LISTENER
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.EMAgentConfig updateAgentConfigFiles
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml ...
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
CONFIG: Local host name: H1B-6F175-9JVJ.GDNINDIA.COM
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [COMPUTERNAME=H1B-6F175-9JVJ, NEED_EXIT_CODE=1, ORACLE_SID=Embarq, PATH=D:\oracle1\product\10.2.0\db_1\jdk\jre\bin\server;D:\oracle1\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;d:\data\notes;c:\program files\notes, SystemRoot=C:\WINDOWS, TZ=, WINDIR=C:\WINDOWS]
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: CMD /C D:\oracle1\product\10.2.0\db_1\bin\emctl.bat deploy dbconsole D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM:3938 H1B-6F175-9JVJ.GDNINDIA.COM Embarq
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of CMD /C D:\oracle1\product\10.2.0\db_1\bin\emctl.bat deploy dbconsole D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM:3938 H1B-6F175-9JVJ.GDNINDIA.COM Embarq completed successfully
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Creating shared install...
Source location: D:\oracle1\product\10.2.0\db_1
Destination (shared install) : D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
DeployMode : dbconsole
Creating directories...
Setting console properties ...
Setting log and trace files locations for Console ...
Setting log and trace files locations for Agent ...
Service "OracleDBConsoleEmbarq" create SUCCESS
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emoms.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emoms.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [LD_LIBRARY_PATH=D:\oracle1\product\10.2.0\db_1\lib32;D:\oracle1\product\10.2.0\db_1\lib;D:\oracle1\product\10.2.0\db_1\perl\lib;null, PERL5LIB=D:\oracle1\product\10.2.0\db_1\sysman\admin\scripts;D:\oracle1\product\10.2.0\db_1\bin;]
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: D:/oracle1/product/10.2.0/db_1/perl/5.8.3/bin/MSWin32-x86-multi-thread\perl.exe D:\oracle1\product\10.2.0\db_1\bin\targetdeploy.pl D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM Embarq
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of D:/oracle1/product/10.2.0/db_1/perl/5.8.3/bin/MSWin32-x86-multi-thread\perl.exe D:\oracle1\product\10.2.0\db_1\bin\targetdeploy.pl D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM Embarq completed successfully
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Creating targets.xml in state directories...
Source location: D:/oracle1/product/10.2.0/db_1
Destination : D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
Creating directories...
Creating targets.xml...
Done.
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
CONFIG: Successfully deployed state dirs for H1B-6F175-9JVJ.GDNINDIA.COM
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.EMAgentConfig performConfiguration
CONFIG: Successfully updated agent config files
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp has been copied to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\install\portlist.ini ...
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\install\portlist.ini has been copied to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Writing the selected ports to portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\install\portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: File D:\oracle1\product\10.2.0\db_1\install\portlist.ini is successfully updated
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\install\portlist.ini ...
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\install\portlist.ini has been copied to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Writing the selected ports to portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\install\portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: File D:\oracle1\product\10.2.0\db_1\install\portlist.ini is successfully updated
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleEmbarq
Sep 27, 2007 3:23:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:28:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:28:16 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log for more details.
Sep 27, 2007 3:28:16 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:569)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:181)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:150)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:155)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:430)
at java.lang.Thread.run(Thread.java:534)There is a log file referred at Refer to the log file at "D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log for more details."
Check the contents of this file.
Out from the log you posted I can see it is a windows platform. One common issue with windows and EM is the lack of a fixed IP Address. If this is the case configure a loopback adapter.
In the mean time, you don't need to have checked the configure EM DB Control from install time, you can skip this configuration and perform it later, so at least you have a working database just to start.
~ Madrid -
Get error while Integrating with Oracle's Enterprise User Security
Hi,
I am trying to create an Oracle Enterprise User integrating with OVD and MS Active Directory.
I am following all the steps in Integrating with Oracle's Enterprise User Security.
In the documentation section: "Configuring Oracle Virtual Directory for the Integration"
I have applied the steps successfully until:
Update and load the entries into the Local Store Adapters by performing the following steps:
I have successfully extended the Oracle Virtual Directory schema with the loadOVD.ldif
However I am getting errors in the next step: Update realmRoot.ldif to use your namespaces
The next step states the following:
Update realmRoot.ldif to use your namespaces, including the dn, dc, o, orclsubscriberfullname,
and memberurl attributes in the file. If you have a DN mapping between Active Directory and
Oracle Virtual Directory, use the DN that you see from Oracle Virtual Directory.
The realmRoot.ldif file is located in ORACLE_VIRTUAL_DIRECTORY_HOME/eus,
where ORACLE_VIRTUAL_DIRECTORY_HOME represents the location where Oracle Virtual Directory is installed.
The realmRoot.ldif file contains core entries in the directory namespace that Enterprise User Security queries. The realmRoot.ldif file also contains the dynamic group that contains the registered Enterprise User Security databases to allow secured access to sensitive Enterprise User Security related attributes, like the user's Enterprise User Security hashed password attribute.
Load your domain root information in the realmRoot.ldif file into Oracle Virtual Directory using the following command:
ldapmodify -h Oracle_Virtual_Directory_Host –p OVD_Port -D cn=admin -w Admin_Password -v -a –f realmRoot.ldif
When I run the ldapmodify command I get the following error:
add dc:
testldap
add objectclass:
top
domain
domainDNS
adding new entry DC=testldap,DC=local
ldap_add: Operations error
ldap_add: additional info: LDAP Error 1 : null
The actual realmRoot.ldif looks like this:
# Please uncomment the following one line if you are importing this
# LDIF file via OVD Manager or OVD Server's ldapmodify tool.
#version: 1
#dn: dc=com
#dc: com
#objectclass: domain
dn: DC=testldap,DC=local
changetype: add
dc: testldap
#o: subarashii
objectclass: top
objectclass: domain
objectclass: domainDNS
#objectclass: orclSubscriber
#orclsubscriberfullname: subarashii
#orclVersion: 90400
# If your domain structure has more layers than dc=subarashii,dc=com,
# for example, it's dc=us,dc=subarashii,dc=com, you will need to load
# the following ldif entry/entries too.
# Uncomment out the following, if required.
#dn: dc=us,dc=subarashii,dc=com
#orclversion: 90400
#orclsubscriberfullname: us
#objectclass: domain
#objectclass: top
#objectclass: orclSubscriber
#dc: us
# Adding EUSDBGroup entry
# Modify the memberurl attribute and replace it with your own domain name
#dn: cn=EUSDBGROUP,dc=subarashii,dc=com
#cn: EUSDBGROUP
#memberurl:ldap:///dc=subarashii,dc=com??sub?(&(objectclass=orclService)(objectclass=orclDBServer))
#objectclass:groupofuniquenames
#objectclass:groupofurls
#objectclass:topDid you ever get your questions answered about the realmRoot.ldif file? Did you manage to configure a successful integration of OVD with EUS? I am battling with trying to get Oracle Virtual Directory integrated with Enterprise User Security, but every step I take in Chapter 7 of the OVD manual fails in some way, and the instructions are often vague. I am not sure how to modify the realmRoot.ldif file. Is there any improved documentation on this? I have logged a Service Request, but not getting any help. Any resources or documentation you know of that provides better guidance would be much appreciated. I am way behind my schedule now and this is a very frustrating exercise.
Thanks. -
New Installation / EM doesn't start.
Hi All,
I am installing a 11gr2 database on a RHEL... These are the OS and DB versions:
Host>
[oracle@rhel98 /]$ uname -a
Linux rhel98 2.6.32-100.34.1.el6uek.x86_64 #1 SMP Wed May 25 17:46:45 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
DB>
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
The listener status:
[oracle@rhel98 /]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 27-NOV-2011 21:41:58
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=rhel98)(PORT=1521)))
STATUS of the LISTENER
Alias ORCL
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 27-NOV-2011 19:45:56
Uptime 0 days 1 hr. 56 min. 2 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /oracle/app/oracle/product/11.2.0/dbhome_1/log/diag/tnslsnr/rhel98/orcl/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=rhel98)(PORT=1521)))
Services Summary...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
After completing the installation the EM didn't come up. Then I recreated the repos
[oracle@rhel98 j2ee]$ emca -deconfig dbcontrol db -repos drop
STARTED EMCA at Nov 27, 2011 11:20:08 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: orcl
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
Nov 27, 2011 11:20:22 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /oracle/app/oracle/cfgtoollogs/emca/orcl/emca_2011_11_27_23_20_08.log.
Nov 27, 2011 11:20:22 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Nov 27, 2011 11:20:23 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /oracle/app/oracle/product/11.2.0/dbhome_1/bin/emctl stop dbconsole
Nov 27, 2011 11:20:25 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Dropping the EM repository (this may take a while) ...
Nov 27, 2011 11:22:23 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
Nov 27, 2011 11:22:24 PM oracle.sysman.emcp.util.DBControlUtil copyEmkeyToRepos
SEVERE: Error copying Em Key to Management Repository. The Em Key is not configured properly or is corrupted in the file system and does not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the /oracle/app/oracle/product/11.2.0/dbhome_1/sysman/config and run following commands:
i) /oracle/app/oracle/product/11.2.0/dbhome_1/bin/emctl config emkey -emkeyfile /oracle/app/oracle/product/11.2.0/dbhome_1/sysman/config/emkey.ora -force
ii) /oracle/app/oracle/product/11.2.0/dbhome_1/bin/emctl config emkey -copy_to_repos
iii) Run EM Configuration Assistant again
2) If emkey.ora is not available from backup, run /oracle/app/oracle/product/11.2.0/dbhome_1/bin/emca with -repos create option.
Nov 27, 2011 11:22:24 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error copying Em Key to Management Repository. The Em Key is not configured properly or is corrupted in the file system and does not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the /oracle/app/oracle/product/11.2.0/dbhome_1/sysman/config and run following commands:
i) /oracle/app/oracle/product/11.2.0/dbhome_1/bin/emctl config emkey -emkeyfile /oracle/app/oracle/product/11.2.0/dbhome_1/sysman/config/emkey.ora -force
ii) /oracle/app/oracle/product/11.2.0/dbhome_1/bin/emctl config emkey -copy_to_repos
iii) Run EM Configuration Assistant again
2) If emkey.ora is not available from backup, run /oracle/app/oracle/product/11.2.0/dbhome_1/bin/emca with -repos create option.
Refer to the log file at /oracle/app/oracle/cfgtoollogs/emca/orcl/emca_2011_11_27_23_20_08.log for more details.
Could not complete the configuration. Refer to the log file at /oracle/app/oracle/cfgtoollogs/emca/orcl/emca_2011_11_27_23_20_08.log for more details.
[oracle@rhel98 j2ee]$ emca -repos create
STARTED EMCA at Nov 27, 2011 11:24:20 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: orcl
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
Nov 27, 2011 11:24:35 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /oracle/app/oracle/cfgtoollogs/emca/orcl/emca_2011_11_27_23_24_20.log.
Nov 27, 2011 11:24:35 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Nov 27, 2011 11:30:32 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Enterprise Manager configuration completed successfully
FINISHED EMCA at Nov 27, 2011 11:30:32 PM
[oracle@rhel98 j2ee]$ emctl status dbconsole
OC4J Configuration issue. /oracle/app/oracle/product/11.2.0/dbhome_1/oc4j/j2ee/OC4J_DBConsole_rhel98.localdomain_orcl not found.
And the error I am getting now it's related to the hostname the
/oracle/app/oracle/product/11.2.0/dbhome_1/oc4j/j2ee/OC4J_DBConsole_rhel98.localdomain_orcl doesn't exist but the OC4J_DBConsole_rhel98_orcl does it.
[oracle@rhel98 j2ee]$ ls -l /oracle/app/oracle/product/11.2.0/dbhome_1/oc4j/j2ee
total 36
-rw-r--r--. 1 oracle oinstall 1015 Nov 21 00:17 deploy_db_wf.ini
drwxr-xr-x. 14 oracle oinstall 4096 Nov 21 00:14 home
drwxr-xr-x. 3 oracle oinstall 4096 Nov 21 00:12 oc4j_applications
drwxr-x---. 6 oracle oinstall 4096 Nov 21 00:12 OC4J_DBConsole
drwxr-x---. 10 oracle oinstall 4096 Nov 22 21:37 OC4J_DBConsole_localhost_rmancat
drwxr-xr-x. 10 oracle oinstall 4096 Nov 27 20:25 OC4J_DBConsole_rhel98_orcl
drwxr-xr-x. 5 oracle oinstall 4096 Nov 21 00:12 OC4J_Workflow_Component_Container
drwxr-xr-x. 5 oracle oinstall 4096 Nov 21 00:12 OC4J_Workflow_Management_Container
drwxr-xr-x. 2 oracle oinstall 4096 Nov 21 00:14 utilities
This is the content of the /etc/hosts file:
[oracle@rhel98 j2ee]$ cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.0.98 rhel98.localdomain rhel98
/etc/sysconfig/network
[oracle@rhel98 j2ee]$ cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=rhel98
[oracle@rhel98 j2ee]$ sysctl kernel.hostname
kernel.hostname = rhel98
Why does the OC4J directory have a wrong hostname? (/oracle/app/oracle/product/11.2.0/dbhome_1/oc4j/j2ee/OC4J_DBConsole_rhel98.localdomain_orcl when the .localdomain isn't it shown as part of the hostname, hosts, network or sysctl kernel.hostname outputs)
Where does the rhel98.localdomain come from?
What's wrong? What else I can do for fixing the EM?
Thanks
Martin
Edited by: 899373 on Nov 27, 2011 7:07 PMWhat's wrong? What else I can do for fixing the EM?
OS/networking mis-configuration
EM is victim; not culprit.
can you ping both hostname & IP# successfully from both local & remote systems?
From remote system:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Martin>ping 192.168.0.98
Pinging 192.168.0.98 with 32 bytes of data:
Reply from 192.168.0.98: bytes=32 time=1ms TTL=64
Reply from 192.168.0.98: bytes=32 time<1ms TTL=64
Reply from 192.168.0.98: bytes=32 time<1ms TTL=64
Reply from 192.168.0.98: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.0.98:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms
And from both IP# and name from local:
[oracle@rhel98 /]$ ping rhel98
PING rhel98 (192.168.0.98) 56(84) bytes of data.
64 bytes from rhel98 (192.168.0.98): icmp_seq=1 ttl=64 time=0.067 ms
64 bytes from rhel98 (192.168.0.98): icmp_seq=2 ttl=64 time=0.102 ms
64 bytes from rhel98 (192.168.0.98): icmp_seq=3 ttl=64 time=0.077 ms
^C
--- rhel98 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2761ms
rtt min/avg/max/mdev = 0.067/0.082/0.102/0.014 ms
[oracle@rhel98 /]$ ping 192.168.0.98
PING 192.168.0.98 (192.168.0.98) 56(84) bytes of data.
64 bytes from 192.168.0.98: icmp_seq=1 ttl=64 time=0.397 ms
64 bytes from 192.168.0.98: icmp_seq=2 ttl=64 time=0.075 ms
64 bytes from 192.168.0.98: icmp_seq=3 ttl=64 time=0.078 ms
^C
--- 192.168.0.98 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2840ms
rtt min/avg/max/mdev = 0.075/0.183/0.397/0.151 ms
[oracle@rhel98 /]$ emctl status dbconsole
Unable to determine local host from URL REPOSITORY_URL=http://localhost:%EM_UPLOAD_PORT%/em/upload/
Any suggestion? -
Subject: RE :(forte-users) Web enterprise & user visibleservice Objects
A few months ago we faced a similar problem while migrating from classic
Forte to Web. We had to protect our investment in various frameworks that we
wrote for the classic Forte apps, which made use of extensive
user-level-caching among other things.
We solved the problem using a custom routing mechanism. In brief, we created
several( replicated) server partitions that contains all the user-level
Service objects that existed in the class-Forte apps. Then we wrote a
'custom-router' which mimics Forte load-balanced router( dialog duration =
session ) to intelligently route incoming HTTPRequests to one of these
replicated partitions. The router would look at the some tag on the session
and then route the request to one of these replicated "client clone" using
the tag. Successive requests from the same client will go to the same
replicated partition so that you can use the client-cache or any other
per-user services.
The advantages of this approach are
1) You can continue to make use of caching and other user-level components
that you may have.
2) The web and classic Forte clients can work seamlessly if you write them
to use reference partitions that hosts the other shared( Environment visible
) service objects.
Ofcourse you will have to write ( and maintain )the custom-routing code and
also pay attention to house-keeping. For example, the burdon of cleaning up
the cache on logout or session expiration lies on you. If you don't do this,
then your new user might be looking at an old cache of some other user.
Hope this helps,
Ajith
Forte Systems Consultant.
Subject: (forte-users) Web enterprise & user visible service objects
Hi
We have taken a forte application and converted it to run on the web using
* forte web enterprise &
* fortecgi.exe
In the forte application we have a user visible Local Cache Manager
Service Object (i.e. each users has their own copy) for storing things
like
* the details of the current user id
* the details of the current client chosen
* arrays that are needed by other windows
With web enterprise this service object is no longer user visible, how can
we make it user visible?
Thanks in advance.
Deborah Wallis
dwallisnbs.co.za
WARNING:
Any unauthorised use or interception of this email is illegal. If this email
is not intended for you, you may not copy, distribute nor disclose the
contents to anyone. Save for bona fide company matters, the BoE Group does
not accept any responsibility for the opinions expressed in this email.
For further details please see: http://www.nbs.co.za/emaildisclaim.htm
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.comA few months ago we faced a similar problem while migrating from classic
Forte to Web. We had to protect our investment in various frameworks that we
wrote for the classic Forte apps, which made use of extensive
user-level-caching among other things.
We solved the problem using a custom routing mechanism. In brief, we created
several( replicated) server partitions that contains all the user-level
Service objects that existed in the class-Forte apps. Then we wrote a
'custom-router' which mimics Forte load-balanced router( dialog duration =
session ) to intelligently route incoming HTTPRequests to one of these
replicated partitions. The router would look at the some tag on the session
and then route the request to one of these replicated "client clone" using
the tag. Successive requests from the same client will go to the same
replicated partition so that you can use the client-cache or any other
per-user services.
The advantages of this approach are
1) You can continue to make use of caching and other user-level components
that you may have.
2) The web and classic Forte clients can work seamlessly if you write them
to use reference partitions that hosts the other shared( Environment visible
) service objects.
Ofcourse you will have to write ( and maintain )the custom-routing code and
also pay attention to house-keeping. For example, the burdon of cleaning up
the cache on logout or session expiration lies on you. If you don't do this,
then your new user might be looking at an old cache of some other user.
Hope this helps,
Ajith
Forte Systems Consultant.
Subject: (forte-users) Web enterprise & user visible service objects
Hi
We have taken a forte application and converted it to run on the web using
* forte web enterprise &
* fortecgi.exe
In the forte application we have a user visible Local Cache Manager
Service Object (i.e. each users has their own copy) for storing things
like
* the details of the current user id
* the details of the current client chosen
* arrays that are needed by other windows
With web enterprise this service object is no longer user visible, how can
we make it user visible?
Thanks in advance.
Deborah Wallis
dwallisnbs.co.za
WARNING:
Any unauthorised use or interception of this email is illegal. If this email
is not intended for you, you may not copy, distribute nor disclose the
contents to anyone. Save for bona fide company matters, the BoE Group does
not accept any responsibility for the opinions expressed in this email.
For further details please see: http://www.nbs.co.za/emaildisclaim.htm
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
Userid & password for Enterprise Manager?!! pls help.
I installed Release 2 9i Infrastructure, Application Server and Developement kit on one NT machine, they were all installed under separate Oracle Home like
d:\oracle\oracleHome (for infrastructure)
d:\oracle\ASHome (for AS)
d:\oracle\SDKHome (for DK)
1. I saw under 'Start/Programs' these folders contain similar things like 'Start/Stop HTTP Server', do I have to start each of these manually?
2. I saw from the notes that we can check the status of the servers by going to the Enterprise Manager.
However, it prompts a window for userid and password. <== which user id and password does it needs?
3. Is there only one Enterprise Manager for all (Infrastructure + AS)?
from my notes and memory during installation, i have only created an instance name and a ias_admin password! (but it does not accept)
Please tell me the clue to these, and the next step to start building a Portal home.
Thanks very much,
a very very newbie :-)the relationship between the infrastructure nodes and the application server nodes is a one to many relationship. The infrastructure home should be the only home that the EMWebsite service has been started for.
the user to log in to em console is ias_admin/<password> if it does not accept the password that you set for this user then try it with caps lock on as you may have had it one when setting the password.
As 9ias release 2 has been designed with a multiple machine install in mind, if you install more than one instance (multiple oracle homes) on the server then you will end up with multiple apache processes and oc4j processes. This means you will be able to connect to 2 apache server homepages under different ports. That is why you get the same page. -
Oracle 11g installation on Linux Enterprise 5 remains hanging at 43%!
Hi all,
as per Subject, I have installed a Linux Enterprise 5 OS downloaded by Oracle Download Center and it is now installed following the nice Guide here.
I have added the missing Linux packages and set up the kernel parameters as per Guide quoted above.
If I launch the Oracle installation, it completes the packages and parameters check fine, install goes fine until 43% and then hangs.
It's not freezing as the Installation window shows ongoing animations, if I try to stop installation it responds immediately asking for confirmation.
It just hangs up!
The Linux machine is actually on a VMWare image on a MacOS Leopard host.
I have tried it on my laptop and desktop as well, but the hang point keeps being the same.
Any idea?
Thanks in advance.Satish Kandi wrote:
Can you post last 10 lines from the installation log? That might provide some clue.Sure.
I will copy more that last 10 lines as last 10 lines do not look too descriptive to me.
This will contain also my Installation abort.
Summary
Global Settings
Source: /mnt/hgfs/Oracle/database/install/../stage/products.xml
Oracle Base: /home/oracle/app/oracle
Oracle Home: /home/oracle/app/oracle/product/11.1.0/db_1 (OraDb11g_home1)
Installation Type: Enterprise Edition
Product Languages
English
Space Requirements
/ Required 3.43GB (includes 224MB temporary) : Available 30.10GB
New Installations (125 products)
Oracle Database 11g 11.1.0.6.0
Enterprise Edition Options 11.1.0.6.0
Oracle Partitioning 11.1.0.6.0
Oracle Spatial 11.1.0.6.0
Oracle OLAP 11.1.0.6.0
Oracle Database 11g 11.1.0.6.0
Oracle Text 11.1.0.6.0
Oracle Net Services 11.1.0.6.0
Oracle Enterprise Manager Console DB 11.1.0.5.0
Oracle Net Listener 11.1.0.6.0
HAS Files for DB 11.1.0.6.0
Oracle Call Interface (OCI) 11.1.0.6.0
Enterprise Manager Agent 10.2.0.3.1
Oracle Programmer 11.1.0.6.0
Oracle Database Gateway for ODBC 11.1.0.6.0
Oracle Advanced Security 11.1.0.6.0
Oracle JVM 11.1.0.6.0
Database Configuration and Upgrade Assistants 11.1.0.6.0
Oracle XML Development Kit 11.1.0.6.0
Generic Connectivity Common Files 11.1.0.6.0
Oracle Multimedia 11.1.0.6.0
Oracle Multimedia Locator 11.1.0.6.0
Oracle Internet Directory Client 11.1.0.6.0
Oracle Database Utilities 11.1.0.6.0
Secure Socket Layer 11.1.0.6.0
PL/SQL 11.1.0.6.0
Oracle Recovery Manager 11.1.0.6.0
Oracle Net 11.1.0.6.0
Assistant Common Files 11.1.0.6.0
Installation Common Files 11.1.0.6.0
Enterprise Manager plugin Common Files 11.1.0.5.0
Oracle LDAP administration 11.1.0.6.0
SQL*Plus 11.1.0.6.0
HAS Common Files 11.1.0.6.0
Oracle Help for the Web 2.0.14.0.0
Oracle UIX 2.2.20.0.0
Precompiler Common Files 11.1.0.6.0
Oracle Clusterware RDBMS Files 11.1.0.6.0
Cluster Verification Utility Common Files 11.1.0.6.0
Oracle Wallet Manager 11.1.0.6.0
Oracle Security Developer Tools 11.1.0.6.0
XML Parser for Java 11.1.0.6.0
Enterprise Manager Minimal Integration 11.1.0.6.0
Oracle Database User Interface 2.2.13.0.0
SQL*Plus Files for Instant Client 11.1.0.6.0
Oracle ODBC Driver 11.1.0.6.0
Required Support Files 11.1.0.6.0
Database SQL Scripts 11.1.0.6.0
OLAP SQL Scripts 11.1.0.6.0
PL/SQL Embedded Gateway 11.1.0.6.0
Oracle Globalization Support 11.1.0.6.0
Character Set Migration Utility 11.1.0.6.0
Oracle Locale Builder 11.1.0.6.0
Secure Socket Layer 11.1.0.6.0
Oracle Java Client 11.1.0.6.0
Oracle JDBC/THIN Interfaces 11.1.0.6.0
Oracle Multimedia Client Option 11.1.0.6.0
Oracle Universal Connection Pool 11.1.0.6.0
Oracle Notification Service 11.1.0.5.0
Oracle Code Editor 1.2.1.0.0I
Oracle Ultra Search Server Rdbms 11.1.0.6.0
Oracle Help For Java 4.2.9.0.0
Oracle Containers for Java 11.1.0.6.0
JAccelerator (COMPANION) 11.1.0.6.0
Database Workspace Manager 11.1.0.6.0
SQLJ Runtime 11.1.0.6.0
Oracle Core Required Support Files 11.1.0.6.0
Platform Required Support Files 11.1.0.6.0
Oracle Ice Browser 5.2.3.6.0
Oracle Application Express 11.1.0.6.0
Oracle SQL Developer 11.1.0.6.0
Oracle JDBC Server Support Package 11.1.0.6.0
regexp 2.1.9.0.0
Enterprise Manager Common Files 10.2.0.3.1
Installation Plugin Files 11.1.0.6.0
Oracle JDBC/OCI Instant Client 11.1.0.6.0
XML Parser for Oracle JVM 11.1.0.6.0
Oracle XML Query 11.1.0.6.0
Oracle Message Gateway Common Files 11.1.0.6.0
Oracle Starter Database 11.1.0.6.0
Sample Schema Data 11.1.0.6.0
Precompiler Required Support Files 11.1.0.6.0
Parser Generator Required Support Files 11.1.0.6.0
Oracle Multimedia Locator RDBMS Files 11.1.0.6.0
Oracle Globalization Support 11.1.0.6.0
Oracle Multimedia Annotator 11.1.0.6.0
Oracle Multimedia Java Advanced Imaging 11.1.0.6.0
Oracle Database 11g Multimedia Files 11.1.0.6.0
Agent Required Support Files 10.2.0.3.1
Oracle 11g Warehouse Builder Server 11.1.0.6.0
Oracle Ultra Search Server 11.1.0.6.0
Oracle Ultra Search Middle-Tier 11.1.0.6.0
Oracle Ultra Search Common Files 11.1.0.6.0
Perl Interpreter 5.8.3.0.4
RDBMS Required Support Files 11.1.0.6.0
Oracle Display Fonts 9.0.2.0.0
RDBMS Required Support Files for Instant Client 11.1.0.6.0
Enterprise Manager Agent Core Files 10.2.0.3.1
Enterprise Manager Common Core Files 10.2.0.3.1
Enterprise Manager Grid Control Core Files 10.2.0.3.1
Enterprise Manager Database Plugin -- Agent Support 11.1.0.5.0
Enterprise Manager Database Plugin -- Management Service Support 11.1.0.5.0
Enterprise Manager Repository Core Files 10.2.0.3.1
Enterprise Manager Database Plugin -- Repository Support 11.1.0.5.0
Provisioning Advisor Framework 10.2.0.3.1
XDK Required Support Files 11.1.0.6.0
Oracle RAC Required Support Files-HAS 11.1.0.6.0
SQL*Plus Required Support Files 11.1.0.6.0
Oracle JFC Extended Windowing Toolkit 4.2.36.0.0
Oracle Extended Windowing Toolkit 3.4.47.0.0
Oracle OLAP API 11.1.0.6.0
Oracle OLAP RDBMS Files 11.1.0.6.0
Oracle Data Mining RDBMS Files 11.1.0.6.0
Oracle Real Application Testing 11.1.0.6.0
Bali Share 1.1.18.0.0
Buildtools Common Files 11.1.0.6.0
Oracle Net Required Support Files 11.1.0.6.0
SSL Required Support Files for InstantClient 11.1.0.6.0
LDAP Required Support Files 11.1.0.6.0
Oracle ODBC Driverfor Instant Client 11.1.0.6.0
Oracle Configuration Manager 10.2.6.0.0
Oracle Universal Installer 11.1.0.6.0
Oracle One-Off Patch Installer 11.1.0.6.0
Installer SDK Component 11.1.0.6.0
Sun JDK 1.5.0.1.1
INFO: Method 'dispose()' Not implemented in class 'OiCcrCsi'
INFO: config-context initialized
INFO: *** Install Page***
INFO: FastCopy : File Version is Compatible
INFO: Install mode is fastcopy mode for component 'oracle.server' with Install type 'EE'.
INFO: Link phase has been specified as needed
INFO: Setup phase has been specified as needed
INFO: HomeSetup JRE files in Scratch :0
INFO: Setting variable 'ROOTSH_LOCATION' to '/home/oracle/app/oracle/product/11.1.0/db_1/root.sh'. Received the value from a code block.
INFO: Setting variable 'ROOTSH_LOCATION' to '/home/oracle/app/oracle/product/11.1.0/db_1/root.sh'. Received the value from a code block.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_exp_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_dirs.lst'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_filemap.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
INFO: Number of threads for fast copy :1
WARNING: This will stop installation of all products and exit the Installer. Are you sure that you want to stop the installation and exit?
INFO: User Selected: Yes/OK
Thanks :) -
Sourcing 7.0 - Strange Login Behaviour for enterprise user
Hello
We have installed SAP Sourcing 7.0 and created one tenant and after that everything was running fine. I have now created another tenant. After this there is a strange login behaviour for enterprise user
When I go to the ...../fsbuyer/portal URL, it given me a login screen. When I try to login with enterprise user and password as specified in the context, it does not let me login even with a correct password. The error is "User Authentication Failed"
I just happened to try NW CE Administrator Login, after this the error changed to "Entry does not exist". Here I gave enterprise user and password and it logged into the system. So I now have to login two times once with NW UME User and other with enterprise user to access the setup page.
However this is the problem only for enteprise user and not for other user accounts that I created. I checked in NW UME, the enterprise user does not exist there. However I can see that other users that I created using "Internal User Accounts" are also created in NW UME.
Anyone faced this behaviour earlier?
This also brings out a very interesting point. In Multi-Tenant Setup when using NW UME does this mean that two tenants cannot share the same user account. Is that so?
Regards,
ShubhamHi Vikram,
Thanks a ton for your reponse.
I would like to understand your solution regarding creating another cluster.
Does this mean I need to install another CE Instance and install sourcing on the same.
OR
I have to create an Add-In instance for the current CE Server and define the Host Name of Add-In Instance in the new cluster
Also in this cluster, which context should I select, System Context or Existing Tenant Context or New Tenant Context.
Regards,
Shubham -
New Installation on Ubuntu 6.10 - logon denied, unable to login at all.
I have successfully installed Oracle XE under Ubuntu 6.10.
When I attempt to login via APEX using system and my entered password I get Invalid Login Creditials.
When I attempt to login to sqlplus as either system or sys with my entered password I get logon denied.
I know I'm typing in the same password, and I've gone through the entire reinstallation process just to be double sure.
Has anybody experienced this problem with a new installation?
What are my option now, while my installation appears valid, with listener, processes and APEX home page operational I don't have any ideas.
Any help really appreciated.ORA-01031: insufficient privilegesThis may happen in two situations :
1. your oracle user is not member of dba group, or
2. within sqlnet.ora file, in $ORACLE_HOME/network/admin you have a line like this :
SQLNET.AUTHENTICATION_SERVICES=(NONE)
Either add your oracle user to dba group, or remove/comment the above line.
Maybe you are looking for
-
How can I purge old data on EM Repository?
I'd like to remove my old data of EM repository. For example, removing old data collected before Jan 1st 2007. Is there any auto-job for that facility? Or Any ideas?
-
CS4 Crashes Regularly when opening a previously made document
All of my recently installed SC4 software will initiate and open perfect. However, when I try to open a file it gives me the attached error. I can begin a new document a nd render just fine.
-
I'm still using the cord that came with the Ipad (2) I just got it for Christmas so it's not old. The cord works when I plug it into the wall but when it's plugged into my computer it simply won't charge. The IPad shows up in ITunes and I can downloa
-
Is this posible in ABAP or DDic?
Hello, I am wondering if some thing like this is possible in ABAP or ABAP dictionary SE11. I would like to create a sample spfli_temp table for example for practice purposes in test system. Is it possible in ABAP or SE11? In oracle you one can accomp
-
I don't want to upgrade to Windows 8.1 - How do I stop the automtice update?
I have Windows 8.1 and barely can use it. I certainly don't want my pc disabled completely by Windows 8.1.