New installation will not install correctly

Hello I have used Firefox for a long while now but have just had an update to my system and now when I installed it the screen "wipes out" when the mouse arrow passes over it. I have tried with veston 8, removing nd instlling 7, removing and then 6. This is the odest version I still have but the problem remains. I am using Windows XP sp3. I am blind so I use Dolphin Luna v12 as a screen magnifier and it changes the screen to negative image which is better for me to see. This has never been a problem with Firefox before.
Many thanks
Roger

This may not be much help but I had a problem with the Dynadock PA3575U-1PRP also runing on Vista Ultimate 32bit, working fine for a couple of weeks but suddently had problems with my extended montior. Like you Toshiba did not seem to want to know except to tell me to unload and reload the software.
I downloaded the updated 2.3 version with still no luck...the frustrating thing was that I could put another Toshiba laptop onto this dynadock and all worked fine. Eventually I went into control panel....system...device drivers and found I had 2 x Nvidia GeForce 8600M GT drivers installed plus 2 x Toshiba dynadock USB... installed.
Before doing the following make sure you have an external monitor connected to your laptop even if at first you dont see anything.
I disabled one of the Toshiba dynadock drivers under Monitors which did not seem to have a problem with my system. Then I disabled one of the Nvida Display drivers and suddenly I could not see anything on my laptop screen...please remember at this point I could not extend to my external monitor still. So my only option was to power off using my power button and restart my machine...suddenly my external monitor is working although the resolution was bad and my laptop monitor was not...after going to control panel....system...device drivers again and enabling the Nvidia driver and restarting the laptop I suddenly have video on both laptop and external monitor screens.
Why this happened I have no idea but it worked.
So...if you check your devise drivers and find you have 2 of the same driver installed you could be having the same problem.
Hope this helped.

Similar Messages

  • I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi.  I have searxhed evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason.

    I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi.  I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.

    Try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please :)

    Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please

    Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
    *Mac OS X 10.5 Leopard installation system requirements*
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
     Cheers, Tom

  • HT1349 itune will not install correctly on my PC  Error message reads "service 'apple mobile device' failed to start

    itune will not install correctly on my PC  Error message reads "service 'apple mobile device' failed to start

    Hello cynthialane,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Best of luck,
    Mario

  • ITunes will not install correctly on my PC with Windows 8.  Any hints?

    iTunes will not install correctly on my PC with Windows 8.  Any hints?
    The error message reads:
    iTunes.exe - Entry Point Not Found
    The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in ghe dynamic link library C:\Program Filess(x86)\iTunes\iTunes.dll.

    See this User Tip by turingtest2
    Troubleshooting issues with iTunes for Windows updates

  • AirPort Utility 5.6 for Mac OS X Lion The installer will not install because it states the OS is not supported. I have the latest

    AirPort Utility 5.6 for Mac OS X Lion The installer will not install because it states the OS is not supported. I have the latest

    Part of your message was not included. Can you re-post with details again please?

  • Error code 31, Drivers will not install correctly

    I am using the following NI PXI cards in a Chroma chassis:
    8360
    5112 or a 5114
    7352 (I think)
    I have a Toshiba laptop, Satellite L305D-S5934 running Vista, on which I am trying to install the driver package.  Everything installs fine, with no errors.  When I plug in the expresscard, turn on the chassis, and then boot the computer, the 8360 installs and is recognized in Device Manager and in MAX.  The other two cards will not install.  I get an error code 31 in device manager on the PCI-PCI/PXI bridge stating that Windows cannot load the driver.
    I have another Toshiba laptop, Satellite L305D-S5895, which specs out about the same, also running Vista, which runs with no problems at all with the same card, cable, and chassis.  Any previous experience with this issue?  Thanks in advance for any timely help you can offer, and I'll gladly supply you folks with as much info as I can.  Attached is a screen shot of the device manager with the flag and the error message.
    -Kyle Jackson
    Attachments:
    DevMgr.jpg ‏141 KB

    Hey Kyle,
    It seems like the ExpressCard isn't working properly, based on what you've told me. You say that the ExpressCard shows up properly in Device Manager after installation, but based on that screenshot it looks like it isn't showing up correctly. Is there an NI-MXI entry in device manager after you install? Take a look at this : Developer Zone : What Laptops Have Been Tested with NI's ExpressCard-MXI for PXI and PXI Express?
    In looking at this article, I don't see either of the two laptops you mentioned as ones we've tested or have had customer's test. That being said, there might be an issue with the S5934 and not with the S5895. I looked into it a bit more, and the two laptops have completely different chipsets, so it's reasonable to say that one laptop might work and one might not. There are a couple things you'll want to do to try and fix this:
    First, make sure you have the most up-to-date BIOS for the S5934. If you still encounter errors, you might want to sign up for the beta program of the NI MXI Express Bios Compatibility Software, which might be able to solve any BIOS incompatibility problems. You can sign up at www.ni.com/beta for that software.
    Justin E
    National Instruments R&D

  • Installer will not install .pkg and .mpkg files.

    Help!
    My specs:
    Machine Name: Power Mac G4 (AGP graphics)
    Machine Model: PowerMac3,1
    CPU Type: PowerPC G4 (2.8)
    Number Of CPUs: 1
    CPU Speed: 400 MHz
    L2 Cache (per CPU): 1 MB
    Memory: 640 MB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.2.8f1
    I lost my version of iTunes and attempted to re-install via free download off of Apple.com. Unfortunately, regardless of what version I attempt to install, my Installer will not run .pkg or .mpkg files. It bounces, then disappears without any results.
    I do not have the Tiger disk - as my father gave me this computer a few years ago without it (as it was his old computer).
    I am absolutely distraught without my iTunes and do not know what to do to rectify the situation with my Installer.
    Can anyone help me please???

    Try moving:
    Home (or your user name) > Library > Preferences > com.apple.installer.plist
    to the desktop and restart your computer. This file saves the settings for that service and may be come corrupt. Removing it from the Preferences folder will result in a new file being created with default settings. If this helps you can trash the file but you may need to reset other things covered by that preference. If it doesn't help you can replace the newly created file with the old one and restart to regain the old settings.
    If that doesn't work you will probably have to copy Installer from your backup drive. You absolutely must have a backup, especially if you are going to try to survive without the Tiger discs (which are, strictly speaking, a legal requirement if you want to run Tiger).

  • Officejet Pro 8600 N911g new firmware will not install.

    My printer: Officejet Pro 8600 N911g
    Current Firmware: CLP1CN1416AR
    My problem: Downloaded the latest firmware update (Version CLP1CN1322CR). When I go to install it, my printer shows as listed, but in the STATUS cloumn, it is listed as "Not applicable".
    I turned my printer on/off.
    I tried updating via network, and when it checks for an update, it states there are no updates avaiable.
    I tried updating via USB.
    I tried updating via the LCD panel on the printer, and when it checks for an update, it states there are no updates avaiable.
    Is there something wrong as to why this current firmware will not install?
    Thanks for any help.

    New Firmware (CLP1CN1416R) was installed automatically (Printer was set for "Auto Update").  Prior to new firmware install,  printer has performed flawlessly...no problems.  Immediately after printer updated it's firmware automatically I began to have multiple problems. 
    First, it kept asking me to perform an "Alignment" which I dutifully performed only to have message come back that 'Alignment Failed".  Printed sheet looked fine, and printer printed fine but now before any page will print the "Alignment Recommended" message comes up which I have to then override (Click 'Do Not Align' button at bottome of 'Alignment Recommended' message box.  This is getting really OLD!!  Simply unacceptable for a business class printer!! 
    Also, the printer randomly has started giving other messages such as "There is a problem with the printer or ink system" AND "Cartridges are Missing" ("when I've just recently put in new catridges and levels are OK!!) AND "Paper Jam" (when there is no jam!!) 
    None of these problems have occurred prior to the automatic firmware update.  I believe the reason HP hasn't posted the new firmware update to their Customer Service website is that they know there are bugs in it and don't want to compound the problems the new version has already created.  I seriously question why an automatic updating of firmware was done with equipment set to "Auto Update" and yet that same new firmware is not available to those who might have had their printers set for "Manual Update". 
    HP Customer Service - You need to issue a statement from the company as to what has happened with this firmware update.  If there are problems, take responsibility for it and make it right.  HP knows who it sent out auto updates to.  These printer owners should be immediately notified and the situation made right.  It is not real assuring to have your front line staff not know why the new firmware is not on the website.  I do not like the idea of having to pay for a Support Call when the problems with my out of warranty printer are directly tied to the Auto Updating of said printer with apparently defective firmware.
    I'd really appreciate a response back from someone in HP Customer Service.

  • Elements Organizer will not install correctly

    I recently installed the latest AAM per Adobe's suggestion to solve nother problem of "installer failed to initialize".  Now I can run the Elements setup.exe withough the failure.  However, when I try to install Elements (either Photoshop or Premiere), all that installs is the editor part.  The organizer does not install correctly.  In other words, when I open the program and click on organizer, nothing happens.  How do I solve this issue?  Rather than spend a bunch of time on this, can I manage my video files through Lightroom's catalog?
    I'd prefer to get the Elements program running properly as my first option.
    Thanks,
    Brian

    Brianbhood I would also ask that you please limit yourself to one discussion.  From your previous posts it is no longer clear what version of Elements you are referring too.  In addition there is another thread where you mentioned you were facing difficulties with Photoshop CS6 and Premiere CS6.
    In regards to troubleshooting Elements installation issues please see Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows - http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html.

  • HT5022 This is not Apple like, the installer will not install because it reports 10.8 is not supported

    This is not Apple like, the installer for  AirPort Utility 5.6 for Mac OS X Lion
    will not install because it reports 10.8 is not supported. So how do I configure my older Airport Express

    AirPort 5.6 won't install under Mountain Lion, but it will run once it is.
    Here are the basic steps to install version 5.6 under Mountain Lion using CharlesSoft's Pacifist:
    If you haven't already download the AirPort Utility disk image file directly from Apple Support Download
    Place the resultant AirPortUtility56.dmg file onto your Mac's Desktop.
    Run Pacifist.
    Click on the Open Package option. Find the disk image file that you just placed on your desktop, and then, click on Open.
    The utility is located as follows: Contents of AirPortUtility56.dmg > Contents of AirPortUtility56.pkg > Contents of AirPortUtility56Lion.pkg > Applications > Utilities > AirPort Utility 5.6.app
    Drag AirPort Utility 5.6.app to your Mac's /Applications/Utilities folder.
    You can now run the AirPort Utility from the Utilities folder.

  • ITunes will not install correctly. error7 windows126

    I have reinstalled apple itunes 5 times yesterday and nothing. It will not install without saying MSVCR80.dll is missing. Error7 (windows126) I ran a check and my computer has no missing or corrupt flies.
    What next?

    See this User Tip by turingtest2
    Troubleshooting issues with iTunes for Windows updates

  • Itunes will not install correctly  Error 7 Windows error 126 Problem is MSVCR 80 not found

    Itunes will not install I get a error message  ERROR 7 Windows error 126  When I try to open Itunes  MSVCR80 Not found

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Itunes will not install correctly on my laptop, how do i solve this problem?

    When I try to download iTunes on to my laptop I end up with the following message:
    iTunes has not installed correctly.  Please reinstall the programme.
    Error 7 usually appears as well.
    I need help!
    CH

    A complete uninstall/reinstall of iTunes and related software components is worth a try (7s can indicate trouble with other software components like Apple Application Support). See the following documents for instructions:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    ... But if no joy there, let's check to see if there's a .NET issue underlying this:
    iTunes for Windows: "Error 7" message when opening iTunes

  • Hello, I am holding a Iphone 4. I have serious problems for the update of the IOS software 5. in fact this new software will not install. after several attempts, I have error messages 1602, 1604, 2009 ... Suddenly, the screen of my phone is stuck with the

    ****, I am holding a Iphone 4. I have serious problems for the update of the IOS 5 which will not install. atfer several attemps, ihave error messages 1602, 1604, 2009.

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Maybe you are looking for