New installation : wrong language

Hi Sapers,
I have installed E-Sourcing 5.0.
When I start http://<hostname>:<port>/sourcing/fsbuyer/portal/login, the welcome page is not in english, but in dutch !
I have installed dutch and french language, english is installed by default.
How can I have my welcome page ( and the rest) in english.
Thanks in advance,
Eric.

Eric,
I forgot to mention, the option to change languages on the logon screen only applies to the logon screen itself.
After you have successfully logged into the system, you will have to navigate to your user account (use the hyperlink in the upper right hand corner that appears as your name) and change the language for your user account. This will change the language for all of the other system screens.
Best Regards, Scott

Similar Messages

CS3 Installation, wrong language

Hello,
we installed CS3 (german) on a client PC (XP Prof, SP3) under the administrator account. If InDesign is started using other accounts the language is english. What goes wrong here? And how to fix it?
kind regards

I did, but is was no help, because the program started in English in spite of this. After this i tried to copy the correct (german) settings from the administrator account to the users branch, but this didn't work either. By the way: the user account has the same rights on the local machine as the administrator does...

Wrong language on new ipod touch

I ordered my new 32GB iPod Touch direct from Apple about 4 days ago. It arrived today. I have two problems. 1- it is currently displaying everything in the wrong language and I can't find anything in the online manual on how to change it. 2- when I type in the serial number on Apples support site, it says it's incorrect. I own many Apple product and have never had this much trouble. What a disappointment.
Any thoughts or suggestions

To change language go to Settings>General>International>Language. I would call AppleCare about eh number problem.

Wrong language loaded on new Satellite C660-2DL

Hi All,
Brand new C660-2DL, Some how the wrong language (Finnish) got loaded at startup,is there anyway back? it should have been English. I think i shall be dead if i don't find a cure!!!
All idears wellcome (Don't forget though everything is in Finnish.Thank you.
Citycoach John

Hi
From my experience some units are preinstalled with an image which contains Windows OS in different languages. While first boot you should be able to choose your favorite language and the other languages would be canceled.
Try this: power up the unit, press F8 and choose Repair.
Then choose HDD recover and check if you could choose other language.
If this would not be possible then create a image using the recover disk creator and start the recovery using this disk. Then check if you can change the language.

Impossible to uninstall v16. Automatically re-installs with wrong language (afrikaans) despite manual uninstall of rem Moreover keeps freezing windows explorer.

I Downloaded and installed v17 beta on my desktop (W7/64). OK
I noticed later that the version had changed without doing anything (moved back to v16.0.2, and displayed in Afrikaans).
Note that a second drawer is installed under Program files X86 (Mozilla maintenance service)
I uninstalled both drawers (Firefox & mozilla maintenance service) several times through windows control panel.
Every times remain some leftovers (e.g desktop icon, and the drawers listed above , but they are generally empty)
I tried cleaning registry afterwards (Tuneup utilities, Ccleaner) and even reboot the machine)
And it's always the same story: Firefox icon re-appears on my desktop, and can be normally opened . The software is always displayed in afrikaan language .
Moreover, I noticed (when I try to open the drawer (program files X86) that windows explorer freezes.
I had same problems on 2 windows 7 partitions, same computer. But never under windows 8
I really could do with a bit of help. It looks as though this piece of software is corrupt, and I really don't understand how it can manage to reappear a couple of minutes after being uninstalled .
Otherwise it's not a genuine Firefox version ?
Best regards
Philippe cante
I made screenshots of unistall/cleaning/opening process if that's of any interest to you But I can't attach a file!

The maintenance service runs as a background Window service if necessary and is responsible for downloading and applying an update for all installed Firefox versions without the need to respond to an UAC confirmation that comes with a dimmed window. You only need to give permission once when you install Firefox and the maintenance service isn't installed yet.
If the Firefox user interface (menu bar) is in the wrong language or if you want to change the current language then you can get Firefox in the language of your choice here:
*Firefox 17.0.x: http://www.mozilla.org/en-US/firefox/all.html

ITunes installer installs wrong folder.

Installer installs iTunes.msi in folder IXP729.TMP in Local Settings/Temp on XP SP3 English, then complains it can't find Local Settings/IXP694.TMP/iTunes.msi, which doesn't exist. I navigate to iTunes.msi in the folder it just created, IXP729.TMP but it comes up with some sort of error, then when the installer cancels it deletes that folder. I tried copying the folder while it did exist, then running iTunes.msi directly from it, but it still stops with the same error, that it can't find the non-existant folder. This is a continuing problem--I tried updating to the previous version a couple of months ago and the same thing happened. Plus, the installer and errors are in Japanese, although my OS is English and I selected to install the program in English in a stage of installation before the problem.
Any suggestions?

Thanks, turingtest2. That didn't work, but it helped. You made me realize I had the problem backwards--the new installer wasn't looking for something it had just created and misplaced, it was looking for the previous installer, which had been deleted (if the error message had been in English I'd have been able to read it). MS Program Install and Uninstall Utility also didn't work--gave the exact same error message, that it couldn't find the previous iTunes.msi installer, so it couldn't uninstall the previous version. Once I knew the problem, I found the solution online--Microsoft's old Windows Installer CleanUp Utility, which they discontinued but is still available at Major Geeks. Used that to uninstall the old (along with all the obvious ancillary files, plus bonjour and quicktime), deleted the program folders from Program Files, rebooted, then the iTunes installer worked (oddly, it even kept my old settings and playlists somehow).
If anyone at Apple is reading this, PLEASE give us the option to choose the language of the installer we download. I went to the English apple.com site and entered my country as USA, but because I'm in Japan at the moment the installer was in Japanese.

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

Mdadm boot slow to assemble drives with newer installs

I had a problem where my raid1 installs from this year would pause about 5 seconds per mdadm entry yet my old installs from March 2014 would go through all 4 mdadm entries in less than a second. After fussing for a long time on the new installs I finally broke (slowed) one of my old installs which immediately revealed what the problem was.
I didn't forget to pick partition type FD or FD00. I have my install sequence in a text file so I rarely forget things. I install through PuTTY pasting all the way so it's fast and mistakes are rare.
devices of the form /dev/md/* take about 5 seconds to create.
devices of the form /dev/md{0..127} create very fast.
"mdadm -E --scan" always creates devices of the form /dev/md/{0..127}. In the past I was very meticulous about fixing the device names to the more compact form. I never missed so I never found out there was a substantial speed difference. I just like the the more compact look of /dev/md1 in my boot menu. Eventually I progressed to UUID and LABEL but persisted with the compact form. Then I discovered "mdadm --name" so I left mdadm do it's own thing. What could possibly go wrong?
I also noticed that the mdadm instructions changed from using "mdadm" to "mdadm_udev". mdadm_udev seems to assemble faster than mdadm.
To fix, boot once to see if you're slow, fix any usage of /dev/md*/* in your boot scripts or fstab, fix the form in /etc/mdadm.conf, and mkinitcpio...
I still see that the new installs pause at udev more than old installs, but instead of 20s vs >1s, it's now 5s vs >1s, which is much better.
Looking further I compared mkinitcpio.conf and noticed that autodetect is now installed by default. I took that out and though my list of drivers went way down the pause didn't change. Then I compared "lsinitcpio -a /boot/initramfs-linux.img" and I saw that fsck.zfs was loading so ZFS being a data drive only I uninstalled it and remade mkinitcpio. The pause didn't change.
Now "lsinitcpio -a /boot/initramfs-linux.img" and "lsinitcpio /boot/initramfs-linux.img | sort" compare the same yet the pause remains. I know something is lying because the slow pause computer has a SAS controller and the fast pause computer doesn't, and I know that I must remake mkinitcpio when the SAS controller brand changes or it won't boot without Fallback. The mptsas driver is hiding in there somewhere. So then I unpack both initrd files and by-content compare all files with Total Commander.
Only one difference: mdadm.conf
I can't boot without the SAS controller so I can't check to see if that's the source of the pause. I suspect it is because I can see the NumLock blink halfway through the pause and I know the SAS controller isn't concerned with that.
To solve this quandary I made a quickie install on a SATA only computer. I used the fast form of /dev/md* in mdadm.conf and left autodetect in mkinitcpio.
It's fast, but there's still about a half second pause right there at udev. Out goes autodetect. Still about a half second.
Then, back at the slow pause computer, I swapped the Marvell AOC-SASLP-MV8 for the LSI SAS2008 9211-8i. See Zorinaq for what makes this possible. The pause at udev dropped to about 1s which is only a bit slower than SATA. Not really a win since the LSI BIOS boot takes much longer. The good news is that I didn't need to rebuild mkinitcpio to change controllers. autodetect is toast and I get one more degree of freedom!
I guess that's as good as it gets. Fortunately the mdadm --name option doesn't create /dev/md/* entries so I don't need to fix that.
The Internet is strangely silent on this issue. I guess you're all just used to slow boots with mdraid.
This is a bug and needs to be reported. Either mdadm scan needs to stop producing the slow form or needs to make the slow form fast.

severach wrote:I didn't forget to pick partition type FD or FD00.
I wouldn't use this partition type anymore. (raid autodetect is deprecated)
severach wrote:Then I discovered "mdadm --name" so I left mdadm do it's own thing.
mdadm --name never worked well for me. I don't see many people using it.
I prefer a minimal mdadm.conf that only specifies the md number and UUID.
ARRAY /dev/md0 UUID=627125a5:abce6b82:6c738e49:50adadae
I don't notice any delays but, in my case the raid is assembled in the background while in the foreground LUKS is waiting for me to type a passphrase.

Wrong language in menu Acrobar Reader X

Wrong language used for show menus and etc.
Acrobat Reader 10.1.1. Downloaded by country language (russian). Installation used russian language. In administrator account all menus in russian language, but in users accounts menu in english. In user preference selected "russian". Try to delete registry key "HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\10.0" and copy it from administrator profile - not help.
Any idea?

There may be an easier way, but if I were you, I would try the following.
Remove all traces of Reader (not only the program) from your system using the Windows Installer Cleanup Utility. This is no longer supported by Microsoft because it can produce problems with Win 7, but you can still download it from from places like
http://majorgeeks.com/download.php?det=4459
Then, download the Reader installer from
http://get.adobe.com/reader/enterprise/
and perform a clean install.

App Store wrong language

Hallo, my App Store is in english, but the whole Macbook Pro is in Swiss German. How I can change it.

Hi Hackintosh
In the itunes, everything is fine and it is in Swiss/German.
Just in the App Store is the wrong language.
In the Account Informations on the App Store is Switzerland. I have tried to change in France and then again in Switzerland, but all the times it was English.
The Problem is only with my new Macbook Pro 15".
Have a great time.
Aldo

[SOLVED] GPGME error after chrooting for new installs

There is another thread about this topic, but it is marked as solved. But obviously this error is not solved because new installs are failing.
The problem: after installing the base system with pacstrap and chrooting into the system, there are some very ugly errors when trying to install any additional packages.
Pacman gives the following output:
warning: GPGME error: Invalid crypto engine
File XYZ is corrupted (invalid vor corrupted package (PGP signature)
Do you want to delete it?
Since i installed arch just a few days ago on the same system with different SSD, this error seems to come from the server side. But i am no expert at all, so i have no idea what's wrong.
I tried to delete the etc/pacman.d/gnupg folder and running pacman-key --init, but this is not working.
Last edited by tumas (2014-01-13 18:37:18)

Update the system from the install disk with pacman --root <mountpoint> -Syu. The problem is that you installed at exactly the wrong time, when all of the packages that use gcrypt were updated but libgcrypt wasn't.
Last edited by Scimmia (2014-01-13 18:29:37)

Can I "export" my Homesite settings for a new installation?

I'm doing a complete re-installation of Windows and all my
utilities on a new drive. I've got Homesite 5.5 freshly installed,
but I'd like to migrate all of my settings from the previous
installation to the new one. I thought that simply copying the
entire directory from the old drive to the new would do it, but I
was wrong.
Is there some file elsewhere in my old directory structure
that I can copy, or some way to export my old settings and import
them into the new installation?

Hmm, I thought there was something written on that one, but I
can't find it right now.
It depends upon what you have customized and where you have
put those customizations, but copying over things in the homesite
userdata folder, perhaps also any additions from extensions,
parsers or help.
Some of the setup is in the registry. If you want that,
you'll have to export and re-import parts of that after you run the
homesite installation.
Here're a couple of other resources:
HomeSite TechNote: Exporting FTP and RDS settings
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19229
FAQ: Backing Up Color Coding Schemes
http://www.wilk4.com/asp4hs/tips.htm#backup_colors
If anyone has better details or a better writeup, please
point me to it and I'll link or list it on Asp4hs as a faq.
jw

INSTALL ARCHLINUX (new installation system by Arch Install Script)

After many failed installations, I've resolved and written a mini-guide how to do an easy installation of Arch Linux. I've added it to Manualinux on point 44b.
However, I report it below, maybe could be useful to someone:
44b)INSTALL ARCHLINUX (new installation system by Arch Install Scripts)
Choice if install ArchLinux 32 or 64 bit, following type these commands:
-loadkeys it (choice your language)
-Use cfdisk to create your partitions
cfdisk /dev/sda o /dev/sdx
-Format Partitions Using mkfs and Create Swap
mkfs.reiserfs /dev/sda1
or
mkfs.ext4 /dev/sda1
mkswap /dev/sda2
-Reboot system with installation cd
reboot
-Mount Partition:
cd /
mount /dev/sda1 /mnt
-Make and mount swap partition:
swapon /dev/sda2
-Active wireless or ethernet connection
wifi-menu (choice your wireless connection, I suggest your to disable temporarely your password on router-modem)
dhcpcd (attach ethernet wire)
-Install Base System:
pacstrap /mnt base base-devel
-Install Grub2:
pacstrap /mnt grub-bios
-Install Syslinux:
pacstrap /mnt syslinux
-Generate fstab:
genfstab -p /mnt >> /mnt/etc/fstab
-Login to arch-chroot:
arch-chroot /mnt
-Install package wifi-select
ip link set wlan0 up
pacman -S wifi-select
-Configure Network:
vi /etc/rc.conf
add interface="eth0"
add interface="wlan0"
-Edit Hostname:
vi /etc/hostname
and add desired hostname
-Set Timezone:
ln -s /usr/share/zoneinfo/Europe/Rome /etc/localtime
-Generate Locale:
vi /etc/locale.gen
enable:
it_IT.UTF-8 UTF-8
it_IT ISO-8859-1
it_IT@euro ISO-8859-15
-Execute locale-gen on shell:
locale-gen
-Configure Kernel:
mkinitcpio -p linux
-Configure Bootloader:
grub-mkconfig -o /boot/grub/grub.cfg
grub-install --recheck /dev/sda
-Set root password:
passwd root
-Exit from arch-chroot:
exit
-Unmount Partition:
umount /mnt
-Reboot your system
reboot
-If ethernet wire is attached:
dhcpcd
-If you want configure wireless network:
ip link set wlan0 up
wifi-select (if you have not password on router-modem)
pacman -Syu kde wicd wicd-gtk (insert kdm wicd in /etc/rc.conf)
reboot system and configure your router wireless/wifi connection
Reinsert wireless password on your router/modem
Last edited by Pantera (2012-09-17 20:14:31)

You don't need to install both grub and syslinux. You configure grub in "Configure Bootloader" so this step is unnecessary:
-Install Syslinux:
pacstrap /mnt syslinux
This next step doesn't configure the kernel, it creates an initramfs (see the Beginners' Guide):
-Configure Kernel:
mkinitcpio -p linux
Last edited by 2ManyDogs (2012-09-17 20:28:58)

Overwriting Application Storage Directory on new installs

Hi,
I have an AIR app that gets bundled with XML files that the app needs. These get put into the APP Storage Directory. Works great. But when I install a new version ( which includes new XML files) , the new files don't get added or overwrite the ones for the previous version. It seems that if that directory is there from a previous install, the installer will ignore the part where it moves included files.
Thank you for any help.

I found out what I was doing wrong. I didn't realize that the files also get copied to ApplicationDirectory. These files do get updated on new installs so accessing them from there instead of storage was the key. It does make sense to not futz with the storage dir on uprades so the users pref files etc don't get deleted.

Including Kernel patch during new installation

Dear Collegues,
Is it possible to include a Kernel patch during a new installation?
I am doing a fresh install of Solman 7.01 on windows server 2008 R2 (v6.1) MAX DB.
During teh installation I am getting a message that win 2008 R2 is not supported. I found SAP note: Found this note: Note 1383873 where SAP provides Kernel patchech for Kernel 7.01 that would support the 2008 R2 installation.
I am surprised that if there is already support for R2 why it was not included in the DVDs we got very recently.
Is there a workaround like attaching the patches to the Kernel installation files? I am not quite sure if the installation will get completed successfully so that I could apply teh kernel later on.
Or is there any other way?
Regards,
Haik

Hi
What versions of DVDs are you use?
Just download latest DVDs from service.sap.com/swdc for Solution Manager EHP1:
EXE 51040437_1 SAP SOLMAN 7.0 EHP1SR1 Inst.Master 1 of 3 Info 976563 25.02.2011
RAR 51040437_2 SAP SOLMAN 7.0 EHP1SR1 Inst.Master 2 of 3 Info 976563 25.02.2011
RAR 51040437_3 SAP SOLMAN 7.0 EHP1SR1 Inst.Master 3 of 3 Info 419214 25.02.2011
EXE 51040438_1 SAP SOLMAN 7.0 EHP1 SR1 Inst. Export 1 of 9 Info 976563 23.02.2011
RAR 51040438_2 SAP SOLMAN 7.0 EHP1 SR1 Inst. Export 2 of 9 Info 976563 23.02.2011
RAR 51040438_3 SAP SOLMAN 7.0 EHP1 SR1 Inst. Export 3 of 9 Info 976563 23.02.2011
RAR 51040438_4 SAP SOLMAN 7.0 EHP1 SR1 Inst. Export 4 of 9 Info 976563 23.02.2011
RAR 51040438_5 SAP SOLMAN 7.0 EHP1 SR1 Inst. Export 5 of 9 Info 976563 23.02.2011
RAR 51040438_6 SAP SOLMAN 7.0 EHP1 SR1 Inst. Export 6 of 9 Info 976563 23.02.2011
RAR 51040438_7 SAP SOLMAN 7.0 EHP1 SR1 Inst. Export 7 of 9 Info 976563 23.02.2011
RAR 51040438_8 SAP SOLMAN 7.0 EHP1 SR1 Inst. Export 8 of 9 Info 976563 23.02.2011
RAR 51040438_9 SAP SOLMAN 7.0 EHP1 SR1 Inst. Export 9 of 9 Info 400598 23.02.2011
EXE 51040439_1 SAP SOLMAN 7.0 EHP1 SR1 Java Comp. 1 of 4 Info 976563 24.02.2011
RAR 51040439_2 SAP SOLMAN 7.0 EHP1 SR1 Java Comp. 2 of 4 Info 976563 24.02.2011
RAR 51040439_3 SAP SOLMAN 7.0 EHP1 SR1 Java Comp. 3 of 4 Info 976563 24.02.2011
RAR 51040439_4 SAP SOLMAN 7.0 EHP1 SR1 Java Comp. 4 of 4 Info 740177 24.02.2011
ZIP 51040440 SAP SOLMAN 7.0 EHP1 SR1 Language Info 1655534 23.02.2011
Best Regards,
Aleh

New installation : wrong language

Similar Messages

Maybe you are looking for