New installed font not showing up

Recently downloaded a new font. Dragged and dropped into my font book as well as directly into the font folders (user and hard drive) but it refuses to show up in Keynote and Pages though it is seen in the Photoshop font list. How do I fix this? Thanks.

What exactly is the name of the font you are talking about?

Similar Messages

  • Installed fonts not showing up in Font Book or other apps

    I am having an issue where fonts will install, but not show up in Font Book.
    I go into Font Book, go to File > Add Fonts..., navigate to a font file and click Open, the validating and installing windows will flash by, but the font will not appear in the list of All Fonts. The file will show up in ~/Library/Fonts/, but not in Font Book or any other apps.
    Any clues as to what the issue is and how to fix it?
    Thanks!

    I had thought of that, but they literally are nowhere to be found in the All Fonts list. I've looked through the entire list, as well as searching for the font, but nothing.
    The Windows font was a font was a completely separate family not found on my Mac at all.
    I tried installing different set of fonts (ran them through the Validator and then clicking install when they all checked out), and got the following in the console:
    3/25/14 09:26:26.736 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-Lt.otf', skipping file
    3/25/14 09:26:26.737 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-BdCm.otf', skipping file
    3/25/14 09:26:26.738 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-LtIt.otf', skipping file
    3/25/14 09:26:26.739 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-Bd.otf', skipping file
    3/25/14 09:26:26.739 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-HvCm.otf', skipping file
    3/25/14 09:26:26.740 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-Hv.otf', skipping file
    3/25/14 09:26:26.740 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-It.otf', skipping file
    3/25/14 09:26:26.741 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-BdCnIt.otf', skipping file
    3/25/14 09:26:26.742 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-Cm.otf', skipping file
    3/25/14 09:26:26.742 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-HvCnIt.otf', skipping file
    3/25/14 09:26:26.743 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-BdCn.otf', skipping file
    3/25/14 09:26:26.744 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-BdIt.otf', skipping file
    3/25/14 09:26:26.744 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-Rg.otf', skipping file
    3/25/14 09:26:26.745 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-HvCn.otf', skipping file
    3/25/14 09:26:26.745 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-HvIt.otf', skipping file
    3/25/14 09:26:26.746 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-Cn.otf', skipping file
    3/25/14 09:26:26.747 fontd[210]: Cannot save bookmark for file 'file:///Users/spencerstevens/Library/Fonts/TradeGothicNextLTPro-CnIt.otf', skipping file
    And again, same behavior. Goes into ~/Library/Fonts, but nothing else.

  • Installed fonts not showing up in PSE 11

    I have installed fonts that are not showing up in PSE 11.  Any suggestions?  It's driving me crazy!!

    Windows 7 Home Premium.
    The font is Wanderlust Letters Extra Regular
    It's weird because I also installed Wanderlust Letters Regular, which shows up just fine.
    Is it possible I have too many fonts installed for PSE 11 to detect?  I have 1000+
    Thanks in advance for your help!!

  • New Photoshop Fonts not showing

    mark leroy kilwinning Hi im looking for little help and or advice, i recently upgraded to Adobe Photoshop CS5 but I appear to have lost all my downloaded fonts from the CS4 version of the software, when I had CS4 and wanted to add new fonts I just included them into my mico word and for some reason they popped into Photoshop also, I done this with several fonts I downloaded and used often in CS4,
    I thought as they where in micro word then they would not be replaced when updating CS4 to CS5, but they do not appear, i have looked in the woord fonts and they are still avalible to use there, but dont appear in the list of fonts for CS5, is CS5 set up a little different, like to i need to copy the fonts over into a file that resides in CS5, any help would be most appreciated mark leroy kilwinning

    Noel,
    You are correct. PS, and all Adobe programs, rely on the "installed" fonts in the OS. Those will appear in the Windows (in this case) Fonts Folder. Now, one may have many other fonts, and they might be either manually installed, or done so dynamically, by a font management program.
    Going way back, many Adobe programs did place fonts into folders, usually associated with Illustrator, Photoshop, or PageMaker, BUT though those fonts were stored in the sub-folder (called directories then), they were also installed into the system.
    I believe that many Adobe programs do include some OT fonts, with the programs, probably in a Goodies folder on the installation discs, but it is still the same - to be used, they need to be installed into the system, and the easiest way to do that, if one does not use a font management program, is to use Install Fonts from the system's Control Panel.
    In my case, I have about 19,000 fonts, purchased over the years (a few freebies, but only a few special ones). I have those stored in C:\Fonts and then in PS Fonts, OT Fonts and TT Fonts sub-folders. Only a very few of those are actually installed on the system at bootup (about 350), but then I manage mine with Extensis Suitcase, so can dynamically install, or uninstall fonts, as they are needed with what that program calls Font Sets, and I have those by client, by use (such as Headlines, or Video Fonts), or even by Project.
    If the OP has lost fonts, it is likely that they were accidentally removed from the system.
    I do not know the term "micro word," so cannot comment on that aspect.
    Good luck to the OP,
    Hunt

  • Installed fonts not showing in Pages

    I have fonts installed on my computer that are not showing up in Pages. Does anyone know why this happens and how to fix it.
    I use Fontcase to manage my fonts.

    Hi wbhamilton
    Welcome to the forum.
    Give us some details. What format are the fonts, and where, and how did you install them?
    Peter

  • New installed components not showing in components panel in cs4

    Hi,
    I'm currently reading the excellent book "ActionScript 3.0
    Quick Reference Guide". In some chapters, the authors ask us to
    install third-party components. They install well in the Extension
    Manager CS4, but for a reason I don't know, they're not showing in
    the Components panel...
    I use Flash CS4... but I also have Flash 8 and Flash CS3
    installed (in fact, all the suites) and it never caused problems
    before, so I don't think that's the problem... By the way, if I
    install them in CS3, they show up in the panel.
    FYI, I have a French Canadian Windows XP version and I work
    with English Flash versions...
    Particularly, the extensions I tried are:
    - as3webservice by Pieter Michels (wellconsidered.com);
    - Yahoo! Astra Library (by Yahoo!, of course);
    - Accordion Panel V3AS3 (by JumpeyeComponents).
    Thank you.

    Well, we're making progress...
    No, there're not in that folder, but from what I understand,
    they shouldn't be there either, because in that folder, it's the
    place for the default ones (that comes with Flash).
    The ones that we add are in the Documents and Settings
    folder:
    So, since I installed the same components in Flash CS3 and
    Flash CS4 (because they weren't working in CS4), they appear in:
    C:\Documents and Settings\Nelson Therrien\Local
    Settings\Application Data\Adobe\Flash
    CS3\en\Configuration\Components... Good.
    Now, do they appear in Flash CS4 (path C:\Documents and
    Settings\Nelson Therrien\Local Settings\Application
    Data\Adobe\Flash CS4\en\Configuration\Components)... NO!!
    BUT!! I don't know if it's because I tried the French version
    once or because I have a French Operating System, but I also have a
    fr folder (full path: C:\Documents and Settings\Nelson
    Therrien\Local Settings\Application Data\Adobe\Flash
    CS4\fr\Configuration\Components) and... THEY APPEAR THERE!!
    So, I copied them from the fr folder to the en folder and
    Voilà! They now appear inside the Flash CS4 Components
    Panel...!
    Thank you for pointing me in the right direction!
    Nelson

  • Newly installed Font not showing up in Illustrator. Can anyone shed some light as to why?

    Hello All,
    I've recently installed .otf version of New Century Schoolbook into FontBook. It's working fine in all my other Adobe programs (CS6 CC) but for some reason, it just doesn't seem to want to work inside of Illustrator.
    Can anyone give me a hand getting this font up and running?
    Running Mac OSX 10.7
    Ai CS6 - Up to date
    Thank you so much in advance.
    Jakob

    Have a feeling the alphabetical order may strange like mine on that font. Did they tag the menu name to have Adobe bur invisible, not sure.  Also Check for the calssic menu name not matching font name of "ITC New Century Schoollbook".

  • Installed fonts not showing in menu

    I’m sorry, I did a search and I know this question has
    been asked many times before but I’ve never seen it answered.
    I’ve got true type fonts exported from Mac to PC via
    Fontographer … Photoshop (CS1), Illustrator (CS1), and Quark
    (as old as v5) all see the full family but Flash MX04 does not.
    I’ve tried a few other font conversion utilities without any
    luck. I don’t know if it makes a difference or not but in all
    cases the fonts have been from large families (like HelveNeu) that
    use numbers to identify specific variants, like HelvNeu 87 Heavy
    Condensed. Anyone know a quick fix (rebuying the entire Adobe &
    Linotype libraries is not an option)?

    Applied CD wrote:
    > I?m sorry, I did a search and I know this question has
    been asked many times
    > before but I?ve never seen it answered. I?ve got true
    type fonts exported from
    > Mac to PC via Fontographer ? Photoshop (CS1),
    Illustrator (CS1), and Quark (as
    > old as v5) all see the full family but Flash MX04 does
    not. I?ve tried a few
    > other font conversion utilities without any luck. I
    don?t know if it makes a
    > difference or not but in all cases the fonts have been
    from large families
    > (like HelveNeu) that use numbers to identify specific
    variants, like HelvNeu 87
    > Heavy Condensed. Anyone know a quick fix (rebuying the
    entire Adobe & Linotype
    > libraries is not an option)?
    flash unlike all the other program does not really know what
    font families are.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Fonts not showing up in InDesign CC 64bit

    I find it extremely difficult to believe that Adobe have not found a solution to the issue of installed fonts not showing up in InDesign. If anybody has found a solution that does not include the "rewriting" of font types. Please assist. We specialize in Brand Management, and it becomes extremely challenging when Adobe InDesign does not show up the installed font in order to ensure Brand Management :/

    POSSIBLE SOLUTION
    I'm not sure if this is the cause for anyone else, but I had the same symptoms--almost no fonts showing up in InDesigns Font dropdown options.
    THE SOLUTION:  The new version of ID has two "font filter toggle button". They are the "Apply Favorite Filter", and "Apply Typekit Filter". It seem that in my install, the Typekit filter was on by default, which makes it so that the Font list only displays those fonts that originate from Typekit, as opposed to the thousand you have on your hard drive.
    Click the toggle to turn off the filter and --zowee! All your fonts come right back.
    I hope this helps some of you. It would also explain why people on both Macs and Windows boxes are having this issue.
    Best,
    Lance

  • I've just enabled match and now my new purchases do not show up on my i tunes account. i can only play them buy going in to purchased playlist.

    I've just enabled match and now my new purchases do not show up on my account. I can only access them buy going into purchase playlist?

    SADLY  not as i downloaded an upgrad to my original PAGES/
    i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
    but what a waste of time as it doesn not save any changes done automatically back in the cloud....
    i am now downloading the new LION and hope that it will fix the problem
    i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
    and the same magic was supposed to happen in reverse.
    It doesn't/
    if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
    I hope the new lion will help resolve the isssue/
    any other ideas> keep em coming...thank you so much.

  • I have a Ipod touch and recently added new music to my itunes library on my laptop. When I sync with my ipod, the new music does not show up on my ipod even though the sync process seems to be working.

    I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!

    What happens when you try to sync?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    Do the songs play in iTunes?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod        
    Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

  • I just updated my iPhone 4 to iOS 7.1. The apps I had previously installed are not showing on the screen. They are located in App Store icon. How do I move the icons so they are showing on the screen.

    I just updated my iPhone 4 to iOS 7.1. The apps I had previously installed are not showing on the screen. They are located in App Store icon. How do I move the icons so they are showing on the screen.

    You can move apps around in iOS 7 the same as iOS 6. Press an app icon until you see it wiggle; then drag it to where ever you want it to be. Drag it onto another app to create a folder with the two apps. Tap the Home button to stop the wiggle.

  • In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie.  Is there someway to refresh the IPhoto event in IMovie?

    Background:  I'm transferring file folders from a Visa laptop via an external hard drive to my IMac.  In the folders are photos and videos from different cameras.  SO I first tried to import to IMovie but it would not recognize any of the files.  So then I imported into IPhoto and both photos and videos were imported and I created events for each folder.  When I first opened IMovie I had to wait for it to create "thumb nails".  Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events.  I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie.    I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie. 
    I'm doing this on three events with about 100 photos and videos.  But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie.   I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.  
    Appreciate any tips or pointers.
    OBTW this is my first question as a first time Apple owner. 

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • New Saved files not Showing up in finder

    When I save a new file, since updating to 10.5.4; new files will not show up in the folder it was saved in, until I close it and then reopen it. I have already performed a fix disk permissions with idisk and ran MacJanitor
    Is this a known problem with leopard 10.5.4 I could not find it discussed in the forum.

    I Ran Macjanitor - all tasks, I ran the disk utility on my boot disk. Nothing I did fixed the problem. But for some reason - when I booted up today the problem is gone. I thought I had rebooted yesterday as well - but I am unsure about that. So right now the problem is not showing up. I hope it does not come back. How do you mark this when it just went away and you are not sure it will come back or not.

  • New photos are not showing up in my Photo Stream Folder on my PC. Why?

    New photos are not showing up in my Photo Stream Folder on my PC. Why?

    Everythig is turned on as well.

Maybe you are looking for

  • Upgrade to PI 7.1 and 7.3

    Hi, My customer currently are in upgrading the applications to 7.  They have PI 7.0 as well now. If we need to go for upgrade, is it free for them say 7.1. or 7.3 or do they need to go separate license cost. Regards Krish

  • Brief description of object type in TADIR

    Go to: SE11 -> Table TADIR -> show contents -> on the selection-screen click in the field "OBJECT" and browse - you will see a list of all object types. My question: Where do I get from these brief descriptions? In whichsoever tables are these descri

  • Creating intensity graph from ywo sets of data?

    Hi, In my vi, I am getting two data set dependent on each other, i.e. amplitude(y) versus position(x). The data acquisition of x-y data happens in a for loop. This data is transferred outside the loop with index enabled. Outside the loop I want to pl

  • Import failed in production- Urgent

    Hi ,     I am moving webdynpro Dc from development to production. In production import failed and i got following errors in log trace. I am not using MailApplication  Dc mentioned in error log , is it possible to remove it now??? Kavita Edited by: ka

  • Facetime - imac snow leopard

    Can anybody help? Just updated Facetime on my iMac (OS X 10.6.8 - snow leopard), now I am unable to sign in - keeps telling me to check internet connection but all other internet applications are working so problem is with Facetime Upgrade. I have un