New installed JDK 1.4-11 can't update DST recent changes

I have installed JDK1.4-11 on different redhat ES3 servers. Some of them show the correct DST cahnges. Some not. I also tried tzupdater.jar. It doesn't workt either. Any one has a solution?
Thanks in advance.
Message was edited by:
larryia

The NSU team most likely won't see your message here as this is just a user to user forum.
Use the link below to give feedback to the NSU team:
http://europe.nokia.com/A4577231

Similar Messages

  • HT4972 my iphone is not installed sim card.so I can't update my iphone.

    my iphone is not installed sim card.so I can't update my iphone.

    That's correct, without a supported SIM card you can't set up the phone.
    If your carrier supports unlocking, you can use any SIM after your phone has been unlocked by the provider:
    iPhone: Wireless carrier support and features
    iPhone: About unlocking
    Follow the instructions in this article to unlock your iPhone for use with different carriers.
    Follow these instructions to initiate the unlocking process for your iPhone:
    Check if your carrier offers unlocking. Only your carrier can unlock your iPhone.
    Contact your carrier and request an unlock.You may need to meet certain requirements to qualify for unlocking. After your carrier submits the unlocking request, it may take up to seven days.
    Once you receive confirmation from your carrier that your iPhone unlock has been processed, proceed to the next section.
    If you have a SIM card from a carrier that is different from your current carrier, and you've received confirmation from your current carrier that your iPhone is unlocked, follow these steps:
    Eject your SIM card and insert the new SIM card.
    Complete the setup process.
    If you do not currently have another SIM card you can use, follow these steps to complete the process:
    Back up your iPhone.
    Erase your iPhone.
    Complete the setup assistant and restore your backup.
    Additional Information
    If you experience issues or receive the following error message displayed in iTunes or on your device, follow the steps below:"The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported carrier store."
    Restore your iPhone.
    Contact your carrier to verify that the unlock was applied in your carrier's system.

  • I have PS CS5. It does not recognize .CR2 files from my new Canon PowerShot SX50HS camera. Can I update my CR plugin? To what version? Where can I get it?

    I have PS CS5. It does not recognize .CR2 files from my new Canon PowerShot SX50HS camera. Can I update my CR plugin? To what version? Where can I get it?

    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Mylenium

  • I can't install any apps and i can't update it

    i can't install any apps and i can't update it

    Hi
    This post is showing in the iChat Community/forum.
    Your details/Specs say iPhone and iOS 5 so presumably you mean apps on an iPhone ?
    You probably need here  https://discussions.apple.com/community/iphone/using_iphone
    IF 7 people have read something in iChat then it measn iChat is busy
    9:25 PM      Tuesday; November 22, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Can I update imovie without changing my projects in imovie that haven't been published?

    Can I update imovie without changing my projects in imovie that haven't been published?

    Jimmyalford,
    I am having the same exact problem that you describe.  Can't figure it out.  I've got a really high speed signal, too.  No luck.
    GeeD, I do not have macKeeper installed. And I am running iMovie 10.0.2.
    I hope someone can shed some light on this.
    Thanks all....

  • My iphone5 app store is saying i'm in a UK store and can't update?  To change back to US store, but it is a US store?

    my iphone5 app store is saying i'm in a UK store and can't update?  To change back to US store, but it is a US store?

    Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region...change/check here.

  • [Solved] Vim: Can only undo most recent change

    Howdy-ha, folks.  So I've been (very) gradually making the transition from Geany to Vim over several months, mostly without issue.  However, I've been reluctant to use Vim for anything other than quick, simple operations for one reason: The "u" key will only undo the most recent change, as though there aren't any other changes in the history.  Hitting "u" a second time reverses the "undo" command, so that repeatedly hitting it will just remove and add the same small change over and over again.  No matter how much time I spend looking into this it seems I'm the only person who's ever had this problem, and it occurs regardless of whether /etc/vimrc and ~/.vimrc exist.  As a result, I can't do any complex editing for fear of botching something and needing to spend hours backtracing my mistakes.  Any help on this is appreciated.
    Last edited by ANOKNUSA (2012-05-18 15:22:06)

    skanky wrote:It should do. There's a comment in /etc/vimrc recommending against changing, so it's worth looking into. There are other settings there that could affect some behaviour, apparently.
    That would likely be the issue: I overwrote the default with my own config file, without including runtime! archlinux.vim in my own config.  As far as I can tell, things are working as both user and root.  I suppose I should have paid more attention, but then again, there's no mention in the Arch wiki entry about not altering/deleting any of those files:
    Arch Wiki Vim Entry wrote:
    Vim's personal configuration file is located in the home directory: ~/.vimrc. Advanced users tend to keep a well-tailored ~/.vimrc. The global configuration file is located at /etc/vimrc. The fall-back $VIM variable is defined as /usr/share/vim/. For example, to create a global colorscheme the *.vim colorscheme file should be stored in /usr/share/vim/vimfiles/.
    Currently, the vim global configuration in Arch Linux is very basic and differs from many other distributions' default vim configuration file. To get some commonly expected behaviors (like syntax highlighting, return to the line of the last edit...), consider using vim's example configuration file:
    cp /etc/vimrc /etc/vimrc.bak
    cp /usr/share/vim/vim73/vimrc_example.vim /etc/vimrc
    It seems the comment in /usr/share/vim/vimfiles/archlinux.vim is all new users have to go on, and it's not usually the first place anyone looks.

  • Can't Update Apps After Changing Email Address

    Recently, I changed my Apple ID from my Yahoo! Email to MobileMe. Now every time I try to update my Apps in iTunes or the Mac App Store, I can't update the ones that I bought when I used my Yahoo! Email address. I can still download the updates if I sign in with my Yahoo! account, but that gets annoying.

    To answer you Oh yes I waited.... in fact almost 3 hours and it should not take that long..... I actually ended up restoring it and starting all over again. Seemed to work! We will see....
    Thank you

  • New install Express on Win 8 can see the Server name but cannot see the instance

    I am doing this over the phone with a client who is not sure what he is doing we have installed Ok the folders exist and we have enabled TCP/IP
    The instance is MSSQLServer when we try to connect all we get is 'ComputerName' I am expecting 'ComputerName \MSSQLServer'
    The user does not have administrator rights and he installed SQL Server without the administrator (I think, I am not sure he knows)
    I am looking for clues as to what may cause the instance name to not appear
    thanks in advance
    jnc

    Thanks, that is useful but the list of instances just matches the details in SQL Configuration manager
    What I need is to understand why, if the server is listed and is running it is not visible when we try to connect
    jnc
    Hi jnc,
    Could you please verify that if  the instance name is not listed in “Server name” drop-down list of SQL Server Management Studio (SSMS)? If so, does the instance list in the Local Servers tab in the “Browse for Servers” dialog?
    If you cannot see the express instance in the Local Servers tab in the “Browse for Servers” dialog, the reason may due to SQL Server cannot get the appropriate registry entry information in the System Registry (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
    SQL Server\Instance Names).
    To work around this issue, you can manually input the instance name which will be show in the Local Servers tab. Also make sure that right click on SSMS and then choose “Run As Administrator” to start it.
    However, if the express instance is listed in the Local Servers tab in the “Browse for Servers” dialog, but not in the “Server name” drop-down list. Then if you have never connected with the instance name before, its entry will not listed in the drop-downlist.
    Or if you have connected to server with a wrong instance name, you cannot see its entry the next time.
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • Has anyone noticed that the 1st iPad out cannot install some apps because it can only update to the iOS 5.1.1.

    Has anyone noticed that the first iPad only updates to iOS 5.1.1. So some apps will not install.

    Yes, lots of people have noticed.

  • Can't update iPhoto recently purchase 9.1.1 to 9.2

    I downloaded iPhoto 11 vers. 9.1.1 from the App store about 4 or 5 weeks ago.
    I downloaded version 9.2 and when I try to install it, I get this message:
    >>The version of iPhoto installed on this Mac must be updated through the Mac App Store. Check the Mac App Store to see if an update is available.<<
    I can't seem to find a version from the App store that will update.
    Can someone provide me with a link or a workaround?
    Thanks in advance.
    PS: I checked on the third party app 3ivx, which seems to cause some problems for users but it isn't on my computer.

    Thanks for the quick reply Terence.
    I had called Apple Support and they didn't know probably since it was a new download.
    Like any good Mac software, if you poke around enough you can usually figure things out.
    I went back to my App Store program, and did find the update and it worked smoothly after that.
    Now I'm wondering about Aperature as a next step.
    Thanks again.

  • Can't update, restore, alter, change, add.....

    I am having the same problem as numerous others in an earlier post. Out of the blue, my ipod stopped connecting to itunes. My Computer recognizes my ipod, but will not let me peruse of my files or open the removable disk. I tried resetting numerous times, did not work. I tried updating and then restoring, and it says "ipod service error" when I run the updater.
    This is becoming a huge irritant. I can still play all of the songs that are on my ipod currently, and I can still charge it efficiently, but now I want new music, and I want to get it connecting to Itunes.
    Anyone help?
    (The changing the drive letter and error check didn't work.)
    Dell Inspiron 6000   Windows XP Pro  

    hi lepager!
    I tried updating and then restoring, and it says "ipod service error" when I run the updater.
    just doublechecking. have you seen these two documents yet?
    iPod for Windows: Fast user switching in Windows XP is not supported
    iPod shows up in Windows but not in iTunes
    love, b

  • How Can I update my app new version to the registered devices

    Well, we have developed an in-house app using the Unity3d Game Engine. I'm using a Developer Enterprise account, and have already created the proper certificates, registered the devices (7 ipads) and generated the provisioning Profile. I have already clicked in the 'build an run', and the Unity Engine builds the app, that after is opened at the Xcode. I havel already fixed the bugs, and the app is working properly at the ipads.
    The problem is, I will need to Update the app, and I need to Update them without have to get them and build them at my own Mac, since they do not stay with me. I've been strugling with that for a while. I have downloaded the provisioning profile and sent by e-mail to one of the ipads, the one I'm using to test, and instaled it, but the version of my app have not been updated.
    I checked on my app icloud capabilities. The page about the Update of in-house apps is not very clear(http://help.apple.com/iosdeployment-apps/mac/1.1/#app43ad802c), and I'm new in the development for IOS.
    How can update my app at this Ipads? Is there any step-by-step to follow, more eplanatory that the link above?

    I didn't explained it correctly, I mean without getting the ipads, not the source code. I mean, at every time I need to launch a new version of the app, how can I update it through the internet, because I have installed my app running it at the ipads with the xcode, by usb. I'm using the enterprise program, so, as far as I know, the update is not through apple store.
    The ipads are in use, and I'd like to update them without have to get them to install it myself. Hope I have explained it better this time. Thank you for your help.

  • I cannot install apps on iphone 3gs. It shows that app is installing after entering password and then it quits.  I can still update apps

    After I enter my password, it shows that it is installing app then it goes back to the install app screen.  I can still update apps though.  I updated my software to iOS 6.1.3 and that did not help.  I do not receive any error messages.

    Did you find a solution for this? I have a user at work with this exact issue but on their iPhone 4S.
    Thanks

  • How can i update bootcamp to 3.1 before installing windows 7 if 3.1 is required to install windows 7?

    Seems like a catch 22---bootcamp 3.1 is required to install windows 7 but you can't update bootcamp 3.0 to 3.1 unless you're on the windows side. What gives here??

    Lousy and incompetent tech writers are  to blame.
    3.1 drivers are req'd
    Apple pushed their 3.0 drivers out before Windows 7 was nailed in place.
    The Lion 4.01 drivers avoid the multiple out of date steps.
    Snow Leopard 10.6.0 came out in Aug 2009 and the drivers were buggy.
    In fact I don't think SL was ready either but that is another topic and issue.
    Wish there was a way, but Boot Camp 3.3 is what I use or there is a link to 4.01 set - Windows has nothing to do with Lion, you don't need Lion other than to download drivers standalone driver took 4 minutes for 600MB, people say it takes HOURS or days to get a set of drivers. 600MB is smaller than the recent iOS 5 update, or the whole iTunes + Lion 10.7.2 along with other updates, but they can't get it to "work?"
    Windows driver package
    Download to Windows, you will be current, no more updates needed and works on any Mac running Windows 7

Maybe you are looking for

  • Credit Memo Details in CRM_ORDER_READ

    Hi All, I have to read the credit memo details for a particular Opportunity.  For this can anyone let me know through which export parameter of FM CRM_ORDER_READ, we can find the Creadit Memo details of an Opportunity. Regards, Vinny

  • Validation on line items not triggering for MR41 tcode

    Hi, I have to put a validation on MR41 to check the amount entered on the screen. I am using OB28 to define the validation. Also, I have created user exit in the validation/substitution program where the necessary checks are done. But the validation

  • What is the best way to create a 3d map for flash/actionscript?

    Hi what are good and easy to use tools to create a 3d map/world - terrain, buildings, .... - for use in flash? ideally I would be able to control the objects with actionscript. thanks, Chris

  • Remove password security on acrobat 11

    hello! when i try to remove password security from my pdf file , i get this message anyone knows why? it doesn't happen on acrobat 9

  • Fees with using AIM, SKYPE etc

    Please help me understand the fees for using AIM etc on the phone. I just got a bill, after two years and had extra charges for texting for the first time. In researching the issue, since push and sms was added AND turned ON for AIM, everytime someon