New installed printer not listed in drop down list of Reader 11

Hi, I have recently changed my printer, first uninstalling the old one, restarting the laptop and installing the new one.  On trying to print an email PDF attachment, Reader 11 starts up but my new printer is not listed.  The old one still is, even though it has been uninstalled (via Control Panel / programs). I have downloded a workaround but would prefer to continue using reader.  I am using Windows 7. Other file types print with no problem.  Any ideas please?

Please do not post the same question multiple times!

Similar Messages

  • My area is not on the drop-down list?

    just applied for skype number but my area is not on the drop-down list can't get any further until I choose something from the list, what do I do, just pick the nearest area?
    Post transferred to create its own new thread (topic);
    subject/title edited accordingly.

    Hi, ladyfromllan, and welcome to the Community,
    Yes, you are correct: you would need to choose a Skype Number nearest where you ultimately wished to have your Skype Number located.  Ultimately, the number would be best situated so that those who call it the most would not incur toll charges; however, that said, Skype Numbers are not available absolutely everywhere for several legitimate reasons.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

    created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

    You are using an older version of firefox, upgrade your browser to Firefox 8 and try
    * getfirefox.com

  • I wish to reinstall Adobe Creative Suite 6 Design Standard on a replacement PC using the original box CD and Serial Number. Website says SN is valid but cannot find corresponding Adobe product.  My product is not on the drop down list offered.  hat do I d

    I wish to reinstall Adobe Creative Suite 6 Design Standard on a replacement PC using the original box CD and Serial Number. Website says SN is valid but cannot find corresponding Adobe product.  My product is not on the drop down list offered.  What do I do next?

    Contact support by web chat.
    Mylenium

  • Rejected Quotation Should not appear in Drop Down List

    Dear All,
    While Making PO With Reference to RFQ.
    In ME21N while selecting Rejected Quotation should not come in Drop Down List
    Only Those RFQ with Accepted should come
    Regards
    Amey

    Can it be done in Standard Tcode.
    Are there any customisation for it
    Regards
    Amey

  • HCM Processes & Forms: Field not updating after Drop Down list selection

    Hello all,
    I am having a problem that I think happens a lot, but I can't solve it through all the examples given here.
    I have a Drop Down List where I change the value. On the CHANGE event, I have:
    xfa.record.CONTROL_PARAM.ISR_EVENT.value = "GET_ORGINFO";
    ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
    I have defined a User Event called GET_ORGINFO. It gets triggered fine. It moves into my generic service that I defined, and it changes the value that I want to change.
    When I look at the PDF, the value is still in it's old value. So, after reading some blogs, which specifically says, if something goes wrong in one service (I have 3: my own, SAP_PA and S_MGRS_POSITIONS), they all fail. I debugged and checked, and, after some changes, nothing goes wrong anymore, nothing that I can see anyway.
    So what I do see, is that there's a call made like this:
      CALL METHOD me->process_data_container
        EXPORTING
          ref_to_data_container = ref_to_relevant_data_container
          operation             = c_do_operations
          message_handler       = dummy_message_handler
          no_auth_check         = no_auth_check
        IMPORTING
          is_ok                 = operation_ok.
    Within this method, my new value is listed (in the table VALUES_OF_FIELDS). After this call is made, so when it exists the method process_data_container, the old values are back in VALUES_OF_FIELDS.
    So, at the last moment INSIDE the method, the values are correct, as soon as it steps out of this method, the old values are back.
    Does anyone have any idea? Am I doing something wrong with regards to the User Events? I am on EnhP 04.
    Gr,
    Jaron Frenk

    Hey Chris,
    Unfortunately, that's not it. I did check the fields I need. Everything is going ok. As in, I get the fields (with their current values) in my own generic operation. I see everything updated the way it should. But then at the end, nothing happens...
    What exactly do you mean by " then make sure your own generic service has it's input/output defined correctly". What input/output do you mean? I assume the generic service itself is okay, since it works with the user event "USER_EVENT_CHECK". And it sure is possible I am forgetting something in the definition of the user event, but I can't figure out what.
    A small addition*
    I just checked by user event. I have 3 fields selected:
    I0001_PERSG
    I0001_PERSG_TXT
    I0001_PERSK
    The generic service should get the PERSG and PERSG_TXT based on the PERSK that is entered. I don't think I need anything more.
    Gr,
    Jaron
    Edited by: J. Frenk on Apr 26, 2010 9:01 AM

  • Lotus Notes Missing in Drop Down List for Calendar Synch

    Hello there,
       A) I am attempting to synch my blackberry tour with my calendar in Lotus Notes 8.5.2.  I was able to previously synch my calendar when I had Lotus Notes 8.5.1, but since our upgrade to 8.5.2, I get an error saying it could not find a supported version of Lotus Notes. 
      B)  When I try to go in and configure the organizer section of the desktop software, there is no option for the drop down list for Lotus Notes.  I have tried uninstalling, rebooting and then reinstalling (based on info from other posts), but none of that seems to work.  I have checked and all the connectors are there, but for some reason, they are not being recognized.  Is there some specific key or file that intellisynch is looking for to know that Lotus Notes is installed on the machine?
    Now, I am assuming A&B are symptoms of a common problem, but I am at a loss as to how to move forward.  Any ideas on how I can get this software to recognize Lotus Notes?  I appreciate any help you can give.
    Thanks,
    Rick

    While calling method SET_TABLE_FOR_FIRST_DISPLAY pass 'A' to paramater I_SAVE .
    CALL METHOD grid1->set_table_for_first_display
          EXPORTING i_structure_name = 'SFLIGHT'
                    is_variant       = gs_layout           
                    i_save           = 'A'
                    i_default        = p_def
          CHANGING  it_outtab        = gt_sflight.

  • ODBC driver does not appear in drop down list

    We created a system DSN using Unix ODBCConfig and the drivers
    supplied by IBM in its iSeries Access package. We are trying to
    connect to our AS400. We now have Coldfusion installed on SuSe 9.3
    Open Enterprise Server. Coldfusion runs fine. When we try to add a
    data source in the ColdFusion administrator, the system DSN driver
    that we configured does no show up in the drop down list. Did we
    miss a step? We have done this succesfully with coldfusion on
    Windows 2003 server.

    What version of ColdFusion are you running? I know with MX 7,
    your individual DSNs may not be listed, ODBC or otherwise, only the
    driver types. You are prompted to provide a valid Data Source name,
    then to select a valid driver type, which in your case would be
    ODBC Socket.
    Phil

  • Adapter Engine NOT in the drop-down list - RFC adapter, Communication Chan

    Hello XI Experts,
    I recently installed IDES (ERP2005) along with XI (NW2004s). I carried out the post installation steps for XI. I set up XI (technical systems, business systems, etc).
    I have started to create an RFC to File XI interface. I have carried out the necessary steps in the Integration Repository and am now setting up the scenario, etc in the Integration Directory.
    I have reached the stage of creating the communication channel of type RFC for the sender system. However, when I do this, the adapter engine is empty i.e. there are no possible entries in the drop-down list. I was expecting to see "Integration Server" as a possible entry.
    Could someone advise me on what I may have missed which leads to this problem?
    Thanks and regards,
    Nicholas.

    Hi,
    You have to get the SWCV from SAP market place.
    Support Packages and Patches -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 2004S -> Entry by Component -> Content PI/XI
    XI CONTENT SAP_BASIS 7.00 / 6.40
    You have to upload the file in the Integration repository
    Best regards
    Omar

  • LMS 4.2.3 variable name not show in drop-down list

    Hi all,
    I am trying to use performance threshold to trigger a script whild device CPU or Memory high.
    There is a default threshold template called "CPU Utilization" and "Memory Utilization".
    After I choose either one, there should be one or two variable name in drop down list.
    But I only see "Select MIB Variable" in the list.
    I try to create a template with exact the same variable but still got nothing in the list.
    The strange thing is that no all the default template has this problem.
    I can see variable name under some template like "Device Availability" or "Port Availability"
    And this is not browser problem because I try both IE and Firefox.
    Any one how to solve this?

    Thanks for your advice.
    Now all my devices are connected in Layer View [Devices View], but User Tracking still not shows me informations from several switches about hosts. Its works like randomizer. Now 5 devices form User Tracking  don't show me informations.[WS3550 2 devices and 2  WS-C2960S-48LPS-L]. In lists devices Acquisition Action i check acquisition for this 5 devices. After that acquisition complete, but User Tracking still empty ( all ports on this devices are active).
    SNMP, Credentials all is good.
    I try resolve this problem many days, but without results. Its semmes like a bug.
    ANy propositions?

  • TextBox does not update when drop down list selection changes

    I have drop down list the user can select a client name from. Once the client is selected and the "view report" button is clicked it the report has a textbox that displays the Client name or it is supposed too.
    The report will display the first client name but any subsequent client name does not display on the first. I am pretty sure that is because I have chosen the "Dataset" where the both the "values' have "first" in front of the field.
    How do I get the textbox to update to match as each client is chosen from the drop down list? I cannot use the report "parameter" I am passing to the stored procedure because the drop down list's parameter is the database name not the client
    name.
    Any help is appreciated.
    Thanks,
    Sue

    Okay, sorry but I am just getting back to my report. I still cannot display the Client Name in a text box at the top of my report. The textbox must be dynamic because my client name can be one of many that is picked from a drop down list box.
    I added a textbox and tried to use the "join" with my Parameter - clientname.
    In the textbox expression I used the following:
    =JOIN(First(Fields!ClientName.Value,
    "GetDatabaseName"),",")
    I got this error message:
    [rsRuntimeErrorInExpression] The Value expression for the textrun Textbox1.Paragraphs[0].TextRuns[0] contains an error: Overload resolution failed because no Public 'Join' can be called with these arguments:
        'Public Shared Function Join(SourceArray As String(), [Delimiter As String =  ]) As String':
            Argument matching parameter 'SourceArray' cannot convert from 'String' to 'String()'.
        'Public Shared Function Join(SourceArray As System.Object(), [Delimiter As String =  ]) As String':
            Argument matching parameter 'SourceArray' cannot convert from 'String' to 'Object()'.
    Preview complete -- 0 errors, 1 warnings
    I also tried setting up a "filter" on the clientname using these instructions
    Right-click the dataset (GetDatabaseName) to open the Dataset Properties.
    Click Filters in the left pane, add a filter like below:
    Expression:[DBName]
    Operator: In(multiple-parameter) or =(signal-parameter)
    Value:[@DBName]
    I get an error message too which I am not even going to display.
    I can set it up and run it as long as I don't want to change the value in the "textbox" to match the value in the drop down list. I am totally frustrated at this point. Why won't it work?
    Simply put - I want the value selected in my drop down list box to match the value in my textbox at the top of my report if drop down list says "Susie" then I want "Susie" in my textbox or if drop down changes to "Bobby" then I want Bobby to show up in my
    textbox when I generate my report.
    Any suggestions of what else I may need to try?
    Thanks for the help.
    Sue
    Sue

  • My country  ( EGYPT ) is not on the drop down list for the FaceTime app ?

    While trying to use the FaceTime app.on my iPad I was asked to identify my region I did not find my country EGYPT on the drop down list of all countries .
    What shall I do ?
    pls. Help...
    Thank you .

    We are users.  Contact Apple.

  • Printer not selectable from drop down when printing any pdf file. Printer is available when printing any other file format.

    Client is running Adobe Acrobat X. When trying to print their Ricoh printer can not be seen in the drop down menu. The Printer was added locally and the printer can print any other file format.

    Your ps file should be good, the problem likely resides elswehere. Maybe in your acrobat install, distillers settings. what error did distiller give?
    Mine ran good and got a multi page document, here is a screenshot to help you troubleshoot.
    On mac go to system preferences / print and fax / and change your default printer if you have another option. I know sounds like this should not help, but there are problems like Illustrator for example not making .pdfs if you do not have a printer chosen or an old or corrupt .ppd assigned.

  • Importing or copying Excel list into drop down list

    Can anyone help me with this??  I have a list of 115 departments that I would like to populate the drop down box in an acrobat pdf form and dont have the time to enter them one by one..  Is it possible to either import this list or do a copy and paste??  Please help..  Thanks so much!!

    Here's a link to a very simple PDF that demonstrates how you can populate a combo box (aka drop down) with a list of items that can be pasted into a text field, after copying them from Excel (or some other source): https://acrobat.com/#d=sIJoabh12oYOY19AuTZ9yw
    The idea is that once the drop-down is populated after clicking the "Populate combo box" button, you can copy & paste the field to your form. Be sure to check for duplicates and blank lines.

  • Enable extensions not in Develop drop down list.

    While searching for a solution to get safari 8.0 to run extensions I have come across two problems. First I cannot turn them on. The slider just moves back to 'off' when I slide it to 'on'. Second, I found a website that said I need to enable extensions as they are disabled by default and was given instructions to do so on the 'Develop' menu but there is nothing on the menu to 'Enable extensions'.  Another post from October that they cannot turn extensions on was never resolved.

    Hi daibrahim,
    In Safari 8 for Mac OS X 10.10 (Yosemite) the extensions are managed from the Safari Preferences > Extensions pane. See this article for reference and how to -
    Choose the Safari Extensions you want to use on your Mac - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

Maybe you are looking for