New instances of SAP BO by XML input

Hi, experts,
          Is it possible to input new instances to a Standard SAP BO by using XML input of Service Integration?
          I am trying but still can't figure it out.
          If the input is possible, please share me some documentation or blog posts.
          Or any other tips. Every help is appreciated.
Best Regards,
May T.
ps.This is a little bit urgent, please help.

Hi, Tim ,
     Thanks for both answers
      I want to create new instances of SalesOrder.
      I found there is one option.
      There is a button on SalesOrder Work Center , "New Sales Order from EXCEL".
     Is that what you meant in Number 1??
     If it is, I still have the log in error when I log in to the SAP Add-On in EXCEL.
     Please refer to this link for log on error.
     The specified item was not found.
Regards,
May T.

Similar Messages

Cannot logon to a new instance with SAP*

We installed a ECC60 but unfortunatelu we loose the psw used during sapinst.
THis psw has been used for all the users, included the SAP* and DDIC* users.
Now the installation is finished but we are not able to logon in SAP.
We deleted the rows for SAP* in USR02 and USR01, but the system continue to refuse the logon with psw 'PASS' for SAP*.
We restarted the Oracle instance too but nothing changed.
Regards

Hi
Have a look at the following links and see if it helps,
http://sap.ittoolbox.com/groups/groups.asp?v=sap-r3-security&i=789717
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-basis/passwords-for-sap-and-ddic-40021#
Thanks
Sameer

Installing Oracle TEXT and XML DB Components on New Instance

I was told this may be the best place to ask my quesion
I have set up a New Instance or Oracle on a Solaris Unix box that already had Oracle 10g installed.
The instance was created fine, however I need the Oracle Text Component and XML DB Component installed as well.
Those are not installed with this instance. They are installed on the other instance on the box that was setup when oracle was first installed.
How can I add these components to this new instance?
DBCA was not used when the instance was created. The DBA here does not care for this tool.
Thanks

Hi,
the installation of XMLDB is described in the XML manual: http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14259/appaman.htm#sthref2372
the installation of Text is described on Metalink in document 280713.1.
A nice document to start is on Metalink, it is document 472937.1. It gives Oracle components and the links how to install the components on different versions of Oracle.
Herald ten Dam
Superconsult.nl

Problems when creating a new instance of an Input parameter for a REM

I am working in a small demo which calls a Remote Enable Function Module in order to read data from the back end system. Since the function module I need to call ("BP_BUPA_SEARCH_BY_USER") is not Remote Enable I created a copy of it and made it Remote Enable ("Z_BUPA_SEARCH_BY_USER"). I have created the model within webdynpro without any problems but when my application reaches the line where I create a new instance of the object Z_Bupa_Search_By_User_Input (see below the source code), just before to call the remote function, the application stops there. I have exactly the same code in another bapi calls and it works fine. I am wondering if my problem has anything to do with the fact the function module i am calling is the function module I created. Any advice is very welcome.
Regards,
Diego.
Source Code:
msg.reportSuccess("------>>>"); "THIS LINE IS PRINTED
Z_Bupa_Search_By_User_Input searchByUser =
new Z_Bupa_Search_By_User_Input(); "PROGRAM STOPS HERE
msg.reportSuccess("<<<------"); "THIS LINE DOES NOT
wdContext.nodeZ_Bupa_Search_By_User_Input().bind(searchByUser);
msg.reportSuccess("<----
msg.reportSuccess("if (Internet_User != null)");
if (Internet_User != null) {
Usselmodbe ir_user = new Usselmodbe();
ir_user.setSign("I");
ir_user.setOption("EQ");
ir_user.setLow(Internet_User);
searchByUser.addIr_User(ir_user);

Hi,
Try to get some more error info, e.g. like this:
try {
Z_Bupa_Search_By_User_Input searchByUser =
new Z_Bupa_Search_By_User_Input(); "PROGRAM STOPS HERE
} catch (Exception e) {
    msg.raiseException(e.getMessage(), true);
msg.reportSuccess("<<<------"); "THIS LINE DOES NOT
good luck,
Roelof

Problem in sending XML input as String in BPEL

Hi,
We have a BPEL flow (assign, invoke, assign) which takes an XML input as String.
<RegisterCustomerOnVAS><CustomerID>100</CustomerID><MSISDN>9999999</MSISDN><CustomerName>sanjeev</CustomerName><customerInfo>new user</customerInfo></RegisterCustomerOnVAS>
Assignment is doing fine, but when Invoke calls partner link, the input is getting parsed and only the first text value (eg 100) is getting passed to the partner webservice instead of the entire XML as string.
Can any one please help us in fixing in this problem.
Thanks

Hi,
You should watch your assign activity (maybe a bad assigment level in copy rule). I think the probem is there.
Cyryl

The XML page cannot be displayed Cannot view XML input using XSL stylesheet

Hi Oracle Gurus,
I got this error ...once i have submitted request it shows warning ..I opened output it shows the below error...i cant understand how to resolve this error...Please help me...It is PL/SQ L STORED PROCEDURE CODE...
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
A semi colon character was expected. Error processing resource 'http://orappsus64.tsindia.in:8009/OA_CGI/FNDWRR.exe?temp_id...
<CP_PROJECT>IT/Quintiles/J&J COGNOS</CP_PROJECT>
----------------------------^
n-left:1em;text-indent:-2em"> <GL_MAIN_PERIOD>Jun-12</GL_MAIN_PERIOD>
<TOTAL_REVENUE>4026.14</TOTAL_REVENUE>
<GL_PERIOD>Jun-12</GL_PERIOD>
</G_TOTAL_REVENUE_CAT>
THIS IS MY LOG FILE
[10/1/12 10:44:26 AM] [main] Starting GSF service with concurrent process id = 157635.
[10/1/12 10:44:26 AM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[10/1/12 10:44:26 AM] [Thread-22] Service thread starting up.
[10/1/12 10:44:26 AM] [Thread-23] Service thread starting up.
[10/1/12 10:52:33 AM] [OPPServiceThread1] Post-processing request 1296337.
[10/1/12 10:52:33 AM] [157635:RT1296337] Executing post-processing actions for request 1296337.
[10/1/12 10:52:34 AM] [157635:RT1296337] Starting XML Publisher post-processing action.
[10/1/12 10:52:34 AM] [157635:RT1296337]
Template code: XXTGSCPR004
Template app: PA
Language: en
Territory: US
Output type: EXCEL
[100112_105234216][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[100112_105234216][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[100112_105234216][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[100112_105234216][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[100112_105234216][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[100112_105234217][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[100112_105234217][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[100112_105234217][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[100112_105234217][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[100112_105234217][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[100112_105234217][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[100112_105234217][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=orappsus64.tsindia.in)(PORT=1530)))(CONNECT_DATA=(SID=clone)))]
[100112_105234217][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[100112_105234217][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[100112_105234217][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[100112_105234218][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[100112_105234218][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[100112_105234218][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[100112_105234218][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[100112_105234218][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[100112_105234218][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[100112_105234218][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[100112_105234218][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[100112_105234218][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[100112_105234218][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[100112_105234218][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[100112_105234219][][EXCEPTION] [DEBUG] [APPLTMP]:[AP1/oracle/PROD01/inst/apps/clone_orappsus64/appltmp]
[100112_105234219][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) SE Runtime Environment]
[100112_105234219][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386]
[100112_105234219][][EXCEPTION] [DEBUG] [java.vm.version]:[11.0-b15]
[100112_105234219][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[100112_105234219][][EXCEPTION] [DEBUG] [dbcfile]:[AP1/oracle/PROD01/inst/apps/clone_orappsus64/appl/fnd/12.0.0/secure/clone.dbc]
[100112_105234219][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[100112_105234219][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[100112_105234219][][EXCEPTION] [DEBUG] [path.separator]:[:]
[100112_105234219][][EXCEPTION] [DEBUG] [APPLCSF]:[AP1/oracle/PROD01/inst/apps/clone_orappsus64/logs/appl/conc]
[100112_105234220][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Server VM]
[100112_105234220][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[100112_105234220][][EXCEPTION] [DEBUG] [sun.java.launcher]:[SUN_STANDARD]
[100112_105234220][][EXCEPTION] [DEBUG] [user.country]:[US]
[100112_105234220][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[100112_105234220][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[100112_105234220][][EXCEPTION] [DEBUG] [user.dir]:[AP1/oracle/PROD01/inst/apps/clone_orappsus64/logs/appl/conc/log]
[100112_105234220][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.6.0_10-b33]
[100112_105234220][][EXCEPTION] [DEBUG] [CLIENT_PROCESSID]:[25943]
[100112_105234220][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[100112_105234220][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/endorsed]
[100112_105234221][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[100112_105234221][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[AP1/oracle/PROD01/inst/apps/clone_orappsus64/appl/fnd/12.0.0/secure/clone.dbc]
[100112_105234221][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[tmp]
[100112_105234221][][EXCEPTION] [DEBUG] [line.separator]:[
[100112_105234221][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[100112_105234221][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[100112_105234221][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[100112_105234221][][EXCEPTION] [DEBUG] [cpid]:[157635]
[100112_105234221][][EXCEPTION] [DEBUG] [sun.jnu.encoding]:[UTF-8]
[100112_105234221][][EXCEPTION] [DEBUG] [oracle.apps.fnd.common.Pool.leak.mode]:[stderr:off]
[100112_105234221][][EXCEPTION] [DEBUG] [java.library.path]:[AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386/server:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/../lib/i386:/AP1/oracle/PROD01/apps/tech_st/10.1.3/lib32:/AP1/oracle/PROD01/apps/tech_st/10.1.3/lib:/AP1/oracle/PROD01/apps/apps_st/appl/cz/12.0.0/bin:/AP1/oracle/PROD01/apps/apps_st/appl/iby/12.0.0/bin:/AP1/oracle/PROD01/apps/apps_st/appl/pon/12.0.0/bin:/AP1/oracle/PROD01/apps/apps_st/appl/sht/12.0.0/lib:/usr/java/packages/lib/i386:/lib:/usr/lib]
[100112_105234222][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[100112_105234222][][EXCEPTION] [DEBUG] [java.class.version]:[50.0]
[100112_105234222][][EXCEPTION] [DEBUG] [sun.management.compiler]:[HotSpot Tiered Compilers]
[100112_105234222][][EXCEPTION] [DEBUG] [queue_appl_id]:[0]
[100112_105234222][][EXCEPTION] [DEBUG] [os.version]:[2.6.18-128.el5]
[100112_105234222][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[100112_105234222][][EXCEPTION] [DEBUG] [user.home]:[home/applmgr01]
[100112_105234222][][EXCEPTION] [DEBUG] [user.timezone]:[Asia/Kolkata]
[100112_105234222][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
[100112_105234222][][EXCEPTION] [DEBUG] [file.encoding]:[UTF-8]
[100112_105234222][][EXCEPTION] [DEBUG] [java.specification.version]:[1.6]
[100112_105234222][][EXCEPTION] [DEBUG] [CACHEMODE]:[DISTRIBUTED]
[100112_105234222][][EXCEPTION] [DEBUG] [conc_queue_id]:[6269]
[100112_105234222][][EXCEPTION] [DEBUG] [java.class.path]:[AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/AP1/oracle/PROD01/apps/apps_st/comn/java/lib/appsborg2.zip:/AP1/oracle/PROD01/apps/apps_st/comn/java/classes]
[100112_105234222][][EXCEPTION] [DEBUG] [user.name]:[applmgr01]
[100112_105234222][][EXCEPTION] [DEBUG] [DBCFILE]:[AP1/oracle/PROD01/inst/apps/clone_orappsus64/appl/fnd/12.0.0/secure/clone.dbc]
[100112_105234222][][EXCEPTION] [DEBUG] [java.vm.specification.version]:[1.0]
[100112_105234222][][EXCEPTION] [DEBUG] [java.home]:[AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre]
[100112_105234222][][EXCEPTION] [DEBUG] [sun.arch.data.model]:[32]
[100112_105234223][][EXCEPTION] [DEBUG] [user.language]:[en]
[100112_105234223][][EXCEPTION] [DEBUG] [java.specification.vendor]:[Sun Microsystems Inc.]
[100112_105234223][][EXCEPTION] [DEBUG] [java.vm.info]:[mixed mode]
[100112_105234223][][EXCEPTION] [DEBUG] [logfile]:[AP1/oracle/PROD01/inst/apps/clone_orappsus64/logs/appl/conc/log/FNDOPP157635.txt]
[100112_105234223][][EXCEPTION] [DEBUG] [java.version]:[1.6.0_10]
[100112_105234223][][EXCEPTION] [DEBUG] [java.ext.dirs]:[AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/ext:/usr/java/packages/lib/ext]
[100112_105234223][][EXCEPTION] [DEBUG] [sun.boot.class.path]:[AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/resources.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/sunrsasign.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/jsse.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/jce.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/charsets.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/classes]
[100112_105234223][][EXCEPTION] [DEBUG] [java.vendor]:[Sun Microsystems Inc.]
[100112_105234223][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[100112_105234223][][EXCEPTION] [DEBUG] [file.separator]:[]
[100112_105234223][][EXCEPTION] [DEBUG] [java.vendor.url.bug]:[http://java.sun.com/cgi-bin/bugreport.cgi]
[100112_105234223][][EXCEPTION] [DEBUG] [sun.io.unicode.encoding]:[UnicodeLittle]
[100112_105234223][][EXCEPTION] [DEBUG] [sun.cpu.endian]:[little]
[100112_105234223][][EXCEPTION] [DEBUG] [APPLOUT]:[out]
[100112_105234223][][EXCEPTION] [DEBUG] [sun.cpu.isalist]:[]
[10/1/12 10:52:35 AM] [UNEXPECTED] [157635:RT1296337] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:285)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:173)
Caused by: oracle.xdo.parser.v2.XMLParseException: Expected ';'.
     at oracle.xdo.parser.v2.XMLError.flushErrors1(XMLError.java:337)
     at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:305)
     at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:289)
     ... 17 more
[10/1/12 10:52:35 AM] [157635:RT1296337] Completed post-processing actions for request 1296337.
[GC 8059K->6286K(8692K), 0.0076290 secs]
[Full GC[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor17]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor19]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor18]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor13]
6286K->3865K(8692K), 0.0446370 secs]
Please help great appriciation.
Thanks,
Sidharth.

A semi colon character was expected. Error processing resource 'http://orappsus64.tsindia.in:8009/OA_CGI/FNDWRR.exe?temp_id...
<CP_PROJECT>IT/Quintiles/J&J COGNOS</CP_PROJECT>
----------------------------^
n-left:1em;text-indent:-2em">   <GL_MAIN_PERIOD>Jun-12</GL_MAIN_PERIOD>
<TOTAL_REVENUE>4026.14</TOTAL_REVENUE>
<GL_PERIOD>Jun-12</GL_PERIOD>
</G_TOTAL_REVENUE_CAT>
{code}
Your PL/SQL code doesn't produce a valid XML document.
In the XML grammar, "&" is a special character and must be escaped using the character entity "&amp;".
If you were using standard methods to build XML from Oracle (SQL/XML functions for instance), I'm sure you wouldn't have this error.
Please show us the PL/SQL code you're using to produce this XML output and we'll be able to help you further.

Cannot view XML input using XSL style sheet. Please correct the error and..

Hi All,
Scenario XML to IDOC.
The interface determination decides whether to create IDOC X or IDOC Y based on a xml segment value.
I have an error in the SXMB_MONI:

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
<SAP:P1>Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160).</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when determining the inbound interface: Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: CL_SWF_RLS_COMPARISON=========CP, include: CL_SWF_RLS_COMPARISON=========CM002, line: 63). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: SAPMSSY1, include: , line: 0). Exception CX_SWF_EXP_EVALUATE occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM027, line: 38). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM01Z, line: 520). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SAI_SWF_RULE_ENGINE========CP, include: CL_SAI_SWF_RULE_ENGINE========CM00S, line: 42). Problem extracting values from the Payload: Check line 2 column 1 of the XML document</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
From the SXMB_MONI, the inbound message payload is truncated with an error:
- <ProductIdentification>
<GlobalProductIdentifier />
- <PartnerProductIdentification>
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
The following tags were not closed: Pip3B12ShippingOrderConfirmation, ShippingOrder, ShipmentLineItem, isContainsHazardousMa...
"> <GlobalPartnerClassificationCode />
<ProprietaryProductIdentifier>000000000000101369</ProprietaryProductIdentifier>
</PartnerProductIdentification>
</ProductIdentification>
- <QuantityInformation>
- <confirmedQuantity>
<ProductQuantity>1.00</ProductQuantity>
</confirmedQuantity>
I've checked that the xml format is OK.
As a matter of fact, if I try to resend the xml file from directory, the message is processed correctly and the payload shows all the xml file.
Thanks.
Daniele
Edited by: Daniele*Verdone on Feb 1, 2010 11:22 AM
Edited by: Daniele*Verdone on Feb 1, 2010 11:23 AM

Hi Suraj,
That option is not available in FTP mode..
This option is applicable only for the File adapter. If you enter a value in this field when configuring the sender FTP adapter, it will have no effect.
Yes, you're right !!
Are you sure that the message is not getting picked in half-way
Now, at this time, I can't see the XML data in the CC monitoring because the tool shows only the recent polling execute in the last 10 minutes. If the error recurs, I will check the payload of CC.
How can I solve the problem with reading incomplete file (FTP mode)?
...Meanwhile I will try with Full cache refresh.
Thanks
Daniele

Cannot find new instances in the workspace

I use BPM Standalone 10g and Studio 10g.
I create a process without a global creation activity and deploy as well as publish it in the BPM Standalone.
The process just has one activity named Interactivejcooper. Its main task is set to Method.
I also create a JAVA PAPI to create new instances of this process. It can create new instances.
However, I cannot find all new instances created by PAPI in the workspace.
The following code is in the PAPI.
--------------------code------------------------
package piic;
import fuego.lang.ConnectionPassport;
import java.util.Properties;
import fuego.papi.Arguments;
import fuego.papi.CommunicationException;
import fuego.papi.InstanceInfo;
import fuego.papi.ProcessService;
import fuego.papi.ProcessServiceSession;
import fuego.papi.OperationException;
import java.util.Properties;
public class Class1 {
public Class1() {
public static void main(String[] args) throws CommunicationException, OperationException {
Class1 class1 = new Class1();
Properties configuration = new Properties();
configuration.setProperty(ProcessService.DIRECTORY_ID, "default");
configuration.setProperty(ProcessService.DIRECTORY_PROPERTIES_FILE, "D:\\BPM_HOME_standalone\\webapps\\papiws\\WEB-INF\\directory.xml");
configuration.setProperty(ProcessService.WORKING_FOLDER, "/tmp");
ProcessService processService = ProcessService.create(configuration);
ConnectionPassport passport = processService.createPassport("jcooper");
passport.setPassword("welcome1");
passport.fillPassport();
ProcessServiceSession session = processService.createSession(passport, "localhost");
for (String processId : session.processesGetIds()) {
System.out.println("\n ProcessID: " + processId);
String processId = "/Processwithoutglobalstart";
String argumentName = "MyArgument";
Object argumentValue = new Object();
Arguments arguments = Arguments.create();
arguments.putArgument(argumentName, argumentValue);
session.processCreateInstance(processId, arguments);
System.out.println("49-----------");
for (String processId2 : session.processesGetIds()) {
System.out.println("\n ProcessID: " + processId2);
for (InstanceInfo instance : session.processGetInstances(processId2)) {
System.out.println(" instance.getId()-> " + instance.getId());
System.out.println(" activity.getActivityId()-> " +instance.getActivityId());
System.out.println(" activity.getActivityName()-> " +instance.getActivityName());
session.close();
processService.close();
----------------------println----------------------------------
E:\Jdeveloper10131_20090318\jdk\bin\javaw.exe -client -classpath E:\Jdeveloper10131_20090318\jdev\mywork\PAPInewInstancewithoutCreation\Project1\classes;D:\BPM_HOME_standalone\client\papi\lib\b1util.jar;D:\BPM_HOME_standalone\client\papi\lib\b1oracle.jar;D:\BPM_HOME_standalone\client\papi\lib\b1base.jar;D:\BPM_HOME_standalone\client\papi\lib\fuegopapi-client.jar piic.Class1
Creating connector [fuego:SQL]
Creating ProcessService with id 'oracle/2009-03-31 18:08:47+08:00'.
Creating local folder: /tmp\system\Schema3387192-1796619082\catalogs
Loading catalogs from local folder: /tmp\system\Schema3387192-1796619082\catalogs
0 jars found locally.
[CatalogMgrCache] =======================
Registering CatalogMgr [oracle/2009-03-31 18:08:47+08:00] ...CatalogManagerCache 1465214:
Managers:
Counters:
[CatalogMgrCache] =======================
CatalogMgr [oracle/2009-03-31 18:08:47+08:00] REGISTERED!CatalogManagerCache 1465214:
Managers:
{oracle/2009-03-31 18:08:47+08:00=fuego.util.LocalCatalogManager@1d0d124}
Counters:
ProcessService 'oracle/2009-03-31 18:08:47+08:00' created successfully.
ProcessID: /InvokeJava2#Default-1.0
ProcessID: /Process#Default-1.0
ProcessID: /ProcessB#Default-1.0
ProcessID: /Processwithoutglobalstart#Default-1.0
ProcessID: /Testprocess#Default-1.0
Unreachable Engine Tolerance (seconds):
by default: 0
to be used: 0
This papi client will not cache exceptions which imply that an engine could not be reached.
Adding local catalog for project: 163
Processing the synchronization information, instance '163:247:0' was created.
49-----------
ProcessID: /InvokeJava2#Default-1.0
instance.getId()-> /InvokeJava2#Default-1.0/242/0
Adding local catalog for project: 162
activity.getActivityId()-> /InvokeJava2#Default-1.0/tojava
activity.getActivityName()-> tojava
ProcessID: /Process#Default-1.0
ProcessID: /ProcessB#Default-1.0
ProcessID: /Processwithoutglobalstart#Default-1.0
instance.getId()-> /Processwithoutglobalstart#Default-1.0/243/0
activity.getActivityId()-> /Processwithoutglobalstart#Default-1.0/Interactivejcooper
activity.getActivityName()-> Interactivejcooper
instance.getId()-> /Processwithoutglobalstart#Default-1.0/244/0
activity.getActivityId()-> /Processwithoutglobalstart#Default-1.0/Interactivejcooper
activity.getActivityName()-> Interactivejcooper
instance.getId()-> /Processwithoutglobalstart#Default-1.0/247/0
Session 'jcooper7676692326836000001' has been closed.
activity.getActivityId()-> /Processwithoutglobalstart#Default-1.0/Interactivejcooper
activity.getActivityName()-> Interactivejcooper
instance.getId()-> /Processwithoutglobalstart#Default-1.0/246/0
activity.getActivityId()-> /Processwithoutglobalstart#Default-1.0/Interactivejcooper
activity.getActivityName()-> Interactivejcooper
instance.getId()-> /Processwithoutglobalstart#Default-1.0/245/0
activity.getActivityId()-> /Processwithoutglobalstart#Default-1.0/Interactivejcooper
activity.getActivityName()-> Interactivejcooper
ProcessID: /Testprocess#Default-1.0
[CatalogMgrCache] =======================
Unregistering CatalogMgr [oracle/2009-03-31 18:08:47+08:00] ...CatalogManagerCache 1465214:
Managers:
{oracle/2009-03-31 18:08:47+08:00=fuego.util.LocalCatalogManager@1d0d124}
Counters:
{oracle/2009-03-31 18:08:47+08:00=1}
[CatalogLoaderMgr] unregisterCatalogMgr freeing resources of LocalCatalogManager
[CatalogMgrCache] =======================
CatalogMgr [oracle/2009-03-31 18:08:47+08:00] UNREGISTERED!CatalogManagerCache 1465214:
Managers:
Counters:
Process exited with exit code 0.

I don't know what happens. It works after I restart BPM studio in 2 hours.

Does PID loop transfer values to new instance

Greetings Everyone,
I'm a new forum user, but I've been using Labview for about three years now.
I have an application that uses PID VIs in multiple cases of a case structure. Each case structure passes a different set of setpoints, gain schedules, limits, ect to the new instance of the PIDvi. What I'm wondering is this: When I switch cases to the new case structure, does all the integral and derivative information get lost in the shift registers of the old PID instance, or does labview keep them in memory and pass them to the new instance? If it kept it in memory it would be a great help, becasue there would be less upset in my PID loop. If not, then I'm going to have to pass a cluster of that information into the new instance...which I'd rather not do to save on system requirements (real time system).
Thanks for the input
Grub
Hell, there are no rules here...we're trying to accomplish something!!! - Thomas Edison

Using the shift register will only work if you make the VIs not reentrant. In any other case, you will need some means of global data storage. I think the most memory efficient is LV2 Globals (also known as Functional Globals), but I haven't tested it, and I know of some benchmarks that showed that the fastest is single element queues globals.
A single element queue global is a queue with the size of 1 where you always remove the element from the queue when doing an operation. This locks any other calls to the queue, because it's empty, and they will have to wait until you place the element back in the queue.
You can search for the other terms to find some documentation about them.
Try to take over the world!

Creating new instances of MDBs at runtime

I am creating an application with a single input point (messages on a JMS Queue). The application needs to be multi-threaded, but would like to process the messages sequentially based on the message type.
For example, a message of type A and a message type B can be processed simultaneously, but only 1 message of type A can be processed at a time. So if the application is processing a message of type A, and it receives another type A message, it must complete the first message before processing the second message.
What I would like to do is have a single MDB (called the dispatcher MDB) that listens on the input point (JMS Queue). The dispatcher MDB calls onMessage() which will look at the message type and the forward to another JMS Queue based on the type. For example, if message type is A, send to Queue A, else if message type B, send to Queue B and so on. Each queue would have a MDB instance servicing the messages. In order to process the messages sequentially on each queue, the pool size for each MDB would be 1.
My problem is that I don't know how many message types there are, this is decided at runtime.
How can I create the Queues and register MDB at runtime?
After some research, I have found the ability to create the Queues using JMX. But, I cannot seem to find details on how to create a register an MDB and tell it to listen on a particular Queue. Has anyone had any experience doing such a thing?

OK, i have some code similar to below, where I want to
create a new instance of the class BookRecord which
takes parameters from Book b, which is an instance if
the class Book.
//This is code from the Libraray class
public void addBookRecord(Book b, String author,
String title)
bookHolder = new BookRecord(b, author, title);
}Now this creates a new BookRecord object that has an
author and title which refer to the Book b. Now when i
invoke the method again, choosing the same object for
b as i did last time it creates a second BookRecord
object, when I just want it to overwrite the values of
the previous BookRecord object. how can i do this
simply?
Thanks in advanceWell I am not quite sure if I understood.
But refering to what you wrote I would say:
//This is code from the Libraray class
public void addBookRecord(Book b, String author, String title)
        if(bookHolder.getBook() != b)
           // Not the same book object
           bookHolder = new BookRecord(b, author, title);
         else
            // same book object
            bookHolder.setAuthor(author);
            book.setTitle(tile);
As I said may be totally not what you are looking for.
Regards
Tarik

How to merge five different xml input files into three output files

Hi All,
Can you please explain me to merge 5 different xml input files into 3 output xml files.
I'm looking forward for ur suggestions...
Thanks
Pullarao

HI
Please see the below links
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
<b>BPM CollectPattern..</b>
http://help.sap.com/saphelp_nw2004s/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
Thanks !
Regards
Abhishek Agrahari
Questions are welcome here!!
<b>Also mark helpful answers by rewarding points </b>

XML Input - Business Config. Object

Hello everyone,
I'm having some problems using XML input files to create instances of my custom B.O.
Here is the code for my B.O.:
businessobject SkillBO {
[Label ("Skill ID")][AlternativeKey]element ID:ID;
[Label ("Contact ID")] element contactID:BusinessPartnerInternalID;
[Label ("Primary Skill")]element mainSkill:MAINSKILLSBCOCode;
[Label ("Secundary Skill")]element subSkill:SUBSKILLSBCOCode;
[Label ("Skill Level")] element level:SkillLevelCode;
element nextAvaibleID:IntegerValue;
association ToBusinessPartner to BusinessPartner;
As you can see the "mainSkill" and "subSkill" elements are of a codelist datatype. This codelist is generated by a Business Configuration Object.
I also created Business Configuration Sets to provide values for these elements.
I don't know what values to put in my Excel-file for these elements. I've tried the code, the actual value, etc. ...
But every time I try to upload it (after converting the Excel to XML of course) nothing happens.
For some reason I can't attach the XML, XLS or XSD...
If you need more information, feel free to ask.
Thanks & Regards,
Glenn

Here are some screenshot of my main -and sub skill BCC:
What should I put in the "value"' field in my excel? The ID or the actual value? (1 or ERP)
Thanks & Regards,
Glenn

XML input: Node

hi experts.
          I can't create an XML input file for my custom BO with node items.
          When I export the XML file from the schema, a warning pops up showing that it is not exportable.
          Is it because of the schema that I created from Service Integration?
Regards,
May T.

Hello Fred and thank you very much for your help!
That is exactly what I did.
Here is the code of my staging Expense report, the dummy BO:
import AP.Common.GDT as apCommonGDT;
import AP.ExpenseReimbursementManagement.Global as ERM;
businessobject StagingExpenseReport {
        element MyInputrow: ID;
        element MyExpenseReportID: ExpenseReportID;
        element MyEmployeeID: EmployeeID;
        element MyExpenseReportTypeCode: ExpenseReportTypeCode;
        element MyPeriod: UPPEROPEN_LOCAL_DateTimePeriod;
        element MyDescription: LANGUAGEINDEPENDENT_EXTENDED_Text;
        element MyReferenceExpenseReportReceiptID: ID;
        element MyReceiptTypeCode: ExpenseReportExpenseTypeCode;
        element MyReceiptCategoryCode: ExpenseReportExpenseCategoryCode;
        element MyAmount: Amount;
        element MyPaymentAmount: Amount;
        element MyNetAmount: Amount;
        element MyReceiptDate: Date;
        element SameExpenseReport: Indicator;
But with this BO structure you can only create one Item/Receipt in each Staging Expense report. [1-1] relationship as everything is in the Root node.
So for example, in order to get a standard expense report with 2 receipts, I would need to create two instances of my Staging/dummy BO from the XML, each with one receipt. And using the ABSL to find which dummy BO goes to which Expense Report.
Am I mistaking or I understood well?
Because the thing is we cannot XML upload a child node in a custom BO neither if I got it right.
Thank you very much for your attention.
Best regards.
Jacques-Antoine Ollier

Creating a new instance of a member class?

I'm writting a serialization library for a college project and I have a problem with deserializing an object which class contains a member class. A rough example:
class Outer{
     class Member{
          double d =0;
     public Member member =new Member();
}Most basically I tried to get a new instance of the Member class in order to get the double field, change it's value, then use that new instance as a field of an object of the Outer class.
Field f = Outer.class.getDeclaredField("member");
f.setAccessible(true);
f.getClass().newInstance(); Both this and the Constructor method throw an exception:
Exception in thread "main" java.lang.InstantiationException: java.lang.reflect.Fieldpointing at the line with newInstance().
Is there anything I can do to create an object of a member class? And if not then taking into account that I have to deserialize the Outer object from an XML file what could be the alternative?

The error message already gives you a hint that it's not class Outer.Member you're instantiating there (review the API docs)...
import java.lang.reflect.*;
public class Outer{
public static void main(final String[] args) {
    final Field f = Outer.class.getDeclaredField("member");
    f.setAccessible(true);
    final Constructor ctor =
            f.getType().getDeclaredConstructor(new Class[] { Outer.class });
    final Object outer = new Outer();
    final Object member = ctor.newInstance(new Object[] { outer });
    // set member.d
    f.set(outer, member);
class Member{
    double d =0;
public Member member =new Member();
}

SAP Business Connector XML File processing

Hi All,
we're using SAP Business Connector to process XML Files (from NON-SAP system).
XML-Files are mapped to IDOCs and sent to our sap-system in order to create purchase orders.
Let's say we have 3 Purchase Orders (XML) in our SAP BC input directory,
the first purchase order has a header text (customer field), the following 2 dont. After processing the xml-files all 3 Idocs have the same header text of the first purchase order.
How can i change this behaviour?
Regards
REA

Hello Ramy,
You have to check this logic of t BC. if you want to check the Idocs then goto WE02 in SAP.
if you are using message type PORDCR1 then check segment E1BPMEPOTEXTHEADER or PORDCR thne check segment E1BPEKPOTX
Regards
Naresh

New instances of SAP BO by XML input

Similar Messages

Maybe you are looking for