New Intel iMac - How do I record from built-in iSight Camera in iMovie?

How do I record in iMovie? Is there a way to record video with the Video Effects included?

Check out iMovie Tutorials.
For step by step video instructions, go to the left column & click on *Other Ways to Import Video*

Similar Messages

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

How to I get the built-in iSight camera to work?

My built-in iSight camera is working but the "capture" button is greyed out and I can't record.

Hi there,
You may want to take a look at some for the troubleshooting steps found in the article below, specifically the section titled "Built-in iSight cameras"
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Hope that helps,
Griff W.

Video from built-in ISight camera to FC???

Greetings.
Has anyone ever recorded a video from a 24" LED Apple display using the built-in ISight video camera and then import that into FC?
What I did seems to work, but the sequence has to be rendered.
Here's what I did. Record video from Isight. The QT properties of this video are h.264, 640x480 14.15 FPS (Never saw this before).
Converted that file in compressor to Pro Res 422. The next steps are the ones I'm unsure of, which is the sequence settings. In sequence settings I set the frame size to 640x480, Pixel Aspect to NTSC, field Dom to upper.
The weird part is the frame rate of the original, 14.15.
Either way, what would be the best way to import/convert isight video to something usable in a preferably Pro Res timeline.
Thanks.
JL

Hi Tom,
Thanks for that. I think I must have done HD because the original video file was 4.5MB. After converting to Pro Res 422, that file was over 200MB!
I didn't know there were SD (DV?) Pro Res presets.
So after I do this, will this just drop nicely into an HDV timeline and I won't get a red render bar? I realize the frame size is different.
Thanks.

NEW Intel iMac: how to access ampersand?

I just bought a new iMac for my daughter and we can not figure out the key combination required to type the '@' (ampersand) key.
Someone please tell us, how do you type the ampersand on this new keyboard? It is not at all like previous Apple keyboards (where you simply use the 'Shift' key)... what is the key combination?

I found it after much gnashing of teeth and fooling around with the International prefpane; located the the keyboard layout in Spanish. For the '@' character, the key combo is 'option - G'.
Ah, the joys of having a multilingual home! (My wife and daughter are Mexican, I am a Spanish-speaking gringo whose brain often gets stuck between my native English and my adopted Spanish)
I thank you all for trying to help. Very kind of you all. Have a happy and prosperous New Year.

Imac g5 not capturing video with built-in isight...

in imovie hd (iLife 05). anyone ever run into this issue?
cL

Hello Cody. I don't think RJ's suggestion will help you with this one.
in imovie hd (iLife 05). anyone ever run into this issue?Everybody does. According to Apple, the iSight built into an iMac G5 (iSight) is not able to capture video into iMovie.
See the "How can I get my built-in iSight to capture iMovie video clips?" section of Built-in iSight ( Late 2005 -> ) for more info and a workaround.

HT1338 How do I migrate from G5 iMac (PPC) 10.4.11 to a new Intel iMac?

I am running OSX Tiger 10.4.11 on an iMac G5 PowerPC from 2006. If I upgrade my hardware to a brand new Intel iMac running Mountain Lion as I am considering, how do I best migrate from my old machine to the new, problem free?
I believe that I can't upgrade beyond 10.4.11 on my G5 as it isn't supported so my problem is a dual upgrade/migration one!
I'm also aware that I can't run PPC software on an Intel Mac but I'm really having trouble getting my head around the problem of such a large, combined hardware and OS upgrade! HELP - what do I need to do?? Simple explantions only please!
PS - Apologies if this aimed at the wrong community or it is not presented correctly - it's my first post!
Many thanks,
Len57

Thanks Mende1; I know that PPC apps won't function on Intel machines but I can migrate the Universal apps, right? There is such a large gap between Tiger and Mountain Lion - can I still migrate files directly from one to the other taking the Universal apps as well? Sorry, I'm not very computer savvy!
Len57

My G5 iMac died how do I move iTunes that I bought to my new Intel iMac

I was able to save the hard drive from my dead G5 iMac and it's now a bootable image on an external firewire drive.
How can I move all my iTunes that I bought to my new Intel iMac?
BTW from what I've read you shouldn't use Migration Assistant when moving from a PPC to an Intel Mac so I don't think I want to go that route.
Any ideas as to how I can do this and not lose all my iTunes that I bought?

i think this should work:
1) boot from the image.
2) use these tips to move the library from the image to another external HD. from the iMac, use the +choose library+ operation below.
or
3) if you have a suitably sized iPod, click here.
or
4) drag & drop the entire iTunes folder to the iMac. put it in the proper location on the iMac in HD/users/your_name/music (overwrite the iTunes folder there - presumably void of any content right now). when done, on the iMac, launch iTunes with the option key pressed. you will see this window
click on +choose library+ and navigate to the +iTunes library file+ (inside the iTunes folder you just dragged & dropped).
any help ?

Importing video from Samsung a707 to new Intel iMac

I've got a new Intel iMac with 3 GB RAM, 500 GB HD, and the Nvidia 256 graphics card... and I've just upgraded my cell phone to a Samsung a707, which has a 2 mp chip, and accepts microSD memory cards. With a 1 GB memory chip, it's supposed to be able to take about a one hour video. I can't find a firewire microSD card reader that would let me import the phone's videos into my iMac. It comes with an SD adaptor, so I could use a firewire SD memory reader too, I think. Does anybody have any suggestions about how I can get the videos on the microSD memory card into my iMac, and then edit them with iMovie?
Thanks for your help!
Tim

Your problems may well be down to the way you connect your camera and in which order you establish a connection. If all else fails voltaic will get the files from your camera in AIC which will readily be imported into im08 for editing.

Clarification on migration from iMac G5 running 10.4.11 to new intel iMac

Hello,
Although a lot of you have already posted on this subject, I just wanted to get a clarification, please. I just got a new intel iMac and I would like to transfer all my files from my iMac G5 (10.4.11). Should I just use the Migration Assistant and that's it? Will the two OS conflict with each other? And also, is it possible to continue to use 10.4.11 on my new iMac?
Thank you very much! I hope Ms. Miriam reads this one. She seems to be very knowledgeable!
-Pedro

Not Miriam, but...
You can use Migration Assistant to go from a Tiger Mac to a Leopard Mac. You will be running the Migration Assistant utility on the new iMac. You might employ FireWire Target Disk Mode (on the old iMac) as part of the process, to connect the two Macs.
http://support.apple.com/kb/HT1661
A new iMac has one FireWire 800 port and no FireWire 400 port (which is the type on the iMac G5). So you will need to get a 9-pin (800) to 6-pin (400) adapter, or a cable that has an 800 end and a 400 end (if you want to use the FireWire method for connection). They are available here
http://eshop.macsales.com/item/Other%20World%20Computing/FIR1369AD/
http://eshop.macsales.com/item/Newer%20Technology/1394B96036/
You can also use a wired or wireless network connection between the two Macs, to do the data transfer.
And also, is it possible to continue to use 10.4.11 on my new iMac?
No. Macs can generally run the OS that came with it, or LATER (up to hardware limitations), but not earlier. So if the new iMac had 10.5.6 pre-installed, it cannot run any earlier version of Mac OS X.

Transfer content from old power imac to new intel imac

What are the dos and do nots when transferring the content from my 6 year old power imac to a new intel imac top of the range?
Thanks, Tom

There are caveats migrating from PPC to Intel, I had no problems, but see Kappy's fine/detailed "A Basic Guide for Migrating to Intel-Macs"...
https://discussions.apple.com/docs/DOC-2295

Anyone using a NEW intell iMac with Logic?

I've got many great responses on both sides to my question regarding my quest to determine which machine to use with Logic -- new Mac Pro (the ultimate) or new iMac (likely cover my bases for a long while and save major cash now). One point raised against iMac was fan noise smack dab in the middle of the listening field with the older iMacs. So a sub question to my original is this:
Are there any NEW intell iMac users out there who are using Logic? Is fan noise a problem? Generally, how do you like the iMac's feasibility as a music workstation with Logic? How many tracks/effects are you running and how is it working for you?

Before those concerns are completely alleviated, go over to the iMac hardware forum and do a search for firewire issues. Like actual physical problems with the jacks on the 20" iMac and having drives just completely "disappear".
the reason you will find issues including firewire ones on the imac forum is because it is a forum for people with issues. it may or may not be the case that there is a subsantial issue with FW on the intel imacs, but obviously people who are having issues are going to pop up there making it seem like everyone is having an issue.
for certain types of music production, an imac would be completely unsuitable. but for others it will be ideal.
there drawback of having 800 and 400 FW bus shared is that if you have a 400 device it will slow down 800 devices to 400. that means it would be ideal for impiro to have either both FW drive and interface as 800's or not go to any further expense of getting an 800 hard drive to use for audio since he would not beneift from the speed.
not a great big deal IMO.
iMac DOES lack expandibility, but it doesn't lack horses. actually i would say (and have said) that impiro would do better with an older tower to allow for expandability because he doesn't need that many horses to do what he needs to do. and i certainly feel that it is unnecessary to spend money on a computer that would be better spent on other things relating to the move to computer based music mixing.
never-the-less, the kind of live musician-audio-based music impiro is going to be making is childs play for modern computers. he will be able to run loads of tracks and plug-ins before a new imac will even break a sweat. even with an interface and a FW drive on 1 bus running at 400. he just won't be able to run loads and loads.
and man....even if he decides to get more heavily into it and start buying third party cards and this that and the next thing he can look at the next computer being a tower. personally, i am changing my computer every 3 years or less - it'll take him at least that long to find the ceiling on a new imac.

Printing problems with HP laserJet 1320 and new Intel iMac

My new Intel iMac won't print to my HP 1320 from Eudora or from web browsers. The applications "quit unexpectedly". From Safari, nothing happens.
I can print PDF documents and Office documents with no problems. The Intel is connected to a router via Airport. The printer is connected to the router via Ethernet. My old G4 iMac prints fine (connected to router via Ethernet) as does my G4 laptop (connected via Airport).

A post from another threat that might help.
From Payson
Solution!!!
Just spent 90 minutes with some nice folks in level 1 and level 2 support.
Problem seems to be that I used migration utility to import the soul of my old machine into the new machine. When you do that, you bring along the old print system (PPC vs Intel).
I had upgraded to 10.4.5 after the migration and assumed that it would correct any problem like that, but it had not.
After a great deal of trial and error, the solution was to go to move disk/library/printers to the desktop and restart the system
Then use the the install disk 1 that came with the iMac and use the OPTIONAL INSTALLS package to reinstall the printer drivers.
Worked like a champ.
Suspect similar problem might happen for any of you with I/O drivers.

Help transferring to new intel iMac

Hello,
I will be getting a new intel iMac in the next week or two, to replace my failing revision A iMac G5. My problem is that the old machine will not be here anymore when the new machine arrives, and I want to make the transition as smooth as possible. I will have a complete backup of the G5 on an external firewire drive, and was wondering if I can use the migration assistant to update from there? Would there be any major problems with preferences that are transferred from the G5 to the intel? What are some of the problems, or quirks I should look out for? Will my Epson Stylus Photo 960 still work? I'm sure the HP Deskjet 970 Cse is no longer an option. Will M$ Office work ok in Rosetta? I know that FCEHD will need to be updated, but that's about all I really need to worry about right now, the kids games can be replaced/updated all in due time, (slowly.)
I know it's a bunch of questions, and I appreciate any and all advice.
Thanks,
Eric.
iMacG5 20 Rev. A, 2 GB Ram, 250 GB HD, BT Mac OS X (10.4.3) 250 GB Ext. HD, 30 GB 3rd Gen. and 6 GB iPod mini

Eric,
Surprise! both the Epson and the HP 970cse are on the list as having new universal binary drivers already installed inside the Tiger OS that will arrive on your iMac Intel.
http://docs.info.apple.com/article.html?artnum=303057#hpdrivers

Installing an existing copy of CS3 to new Intel iMac

I want to install CS3 on my new Intel iMac (moving from my almost defunct PPC G5 tower) which will run Snow Leopard.
I understand using the migrate feature may not be a good idea.
Problem is, I have the CS3 upgrade disc. I do have my original CS full version.
Will the CS version install on an Intel Mac? I was planning on installing CS
and then upgrading with my CS3 disk. Will this work? If not please suggest another method.
I have PS7 and CS full install disks and CS2 and CS3 update disks.
Thanks

You should only need the serial number from the version you upgraded from. If you went from CS to CS3 then have the CS serial and disk handy.
I don't remember if the installer wants you to pop the CS disk in for verification or not.
Bob

New Intel iMac - How do I record from built-in iSight Camera in iMovie?

Similar Messages

Maybe you are looking for