New intel printer drivers from epson

I bought an intel imac and an epson R1800 printer. I did not install the bundled software but downloaded and installed epson's latest update for the intel mac. This was a printer driver install. A "Print CD" application is included in the bundled software which was not installed. I can't find it in the new download. Can I install just the "Print CD" app? Will Rosetta support this app?
Prior to installing any software for the R1800, I checked out epson's site and read an alert about the bundled software that came with the printer. So I installed the update. I want my cd print app.

Life is good! I got a reply from Susan R, Epson tech and she said download the Print CD app and Rosetta will do it. Well I installed the software and it worked. I got an answer sooner than I expected and thanks Susan for helping me. Some people walk around with a tune in their heads, me I walked around and kept bumping into Rosetta, telling myself it just gotta work.

Similar Messages

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Removing print drivers from Leopard

is it a)advisable and b)easy to remove unwanted printe drivers from Leopard's Library folder?

The printer folder is 2.7gb big, and I only use an Epson and/or a Lexmark, so I thought I might free up space to create an eDrive for TechTool. David Pogue's useful book on Leopard says you just trash unwanted drivers, but an article I just read online at Peachpit says that this can cause printing problems so I have a twinge of nervousness

3 different HP print drivers from 7 Macs all running 10.4.6?

I am attempting to setup an HP Color LaserJet 3550, connected to the network via the included USB to ethernet print server. The printer does have a static IP address, but for now I am trying to setup the printer using 'Bonjour'.
From all systems, I go to Printer Setup > Default Browser, and select "hp color LaserJet 3550 (000E7FE922F3)". The Print Using menu defaults to Auto Select, and after a few seconds pops in the following, per system (again, all running Mac OS X 10.4.6):
iMac G5 (20"): hp color LaserJet 1.4
PowerBook G4: hp color LaserJet 1.4.5
iMac G5 (17"): hp color LaserJet 1.4.5
iMac G5 (17"): hp color LaserJet 1.4.5
iMac G5 (17"): hp color LaserJet 1.4.5
iMac G5 (17"): hp color LaserJet 1.4.5
iMac Intel: hp color LaserJet 2.0
If it's not obvious, I'm wondering why the heck the same OS version has different print drivers for the same printer.
I tried HP's website for updated LaserJet 3550 drivers, and the only option that pops up is the LaserJet 1.4 installer. In the case of the 20" iMac above listing the 1.4 driver, I probably inadvertently overwrote version 1.4.5...
So, why is this happening and can I possibly update ALL of my Macs to version 2.0 of this HP driver sofware?
Also, I would like to believe that I can get better speed results if I setup my printers using the IP Printer method. I would love advice on that.
-Matt
7 different Macs Mac OS X (10.4.6)

Hi Greg, thanks for the reply.
I went ahead and downloaded the 10.4.6 Combo Update and reinstalled it on the 20" iMac successfully, but curiously the driver remains "hp color LaserJet 1.4". I didn't bother reinstalling the Combo Update on the others that are already pulling up "hp color LaserJet 1.4.5" due to your comment about the Intel versions being "different" - I figure 1.4.5 is the latest version for the PowerPC code.
I also assumed my printer WAS a postscript printer, especially since, when adding the printer as an IP Printer > HP JetDirect - Socket > Print Using: Auto Select, it pulls up "Generic PostScript Printer" automatically.
I tried installing that hpijs software along with the ESP Gostscript software, and, using the IP Printer / HP JetDirect - Socket process, I can select "HP Color LaserJet 3500 Foomatic/hpijs" from the HP list. But, when I try to print anything to this new printer, the print job appears to go through on the computer, but nothing ever shows on the printer.
Anyway, it appears as though I am stuck using Bonjour with whatever HP Color LaserJet version the OS feels like using (1.4, 1.4.5 or 2.0). My next question would be if I can somehow setup the printer using the IP address and still use the HP Color LaserJet driver that seems to work. I still don't know if using Bonjour would be slower than a static IP setup...
Setting up printers in Mac OS X has become quite annoying.

Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

New HP printer drivers problem with C4280

Hello, I have a HP C4280 all in one printer which all worked fine with the CD drivers which came with the printer. Yesterday the Apple software update showed new HP drivers. After installing the new drivers a HP Setup assistant box come up and it is apparently looking for a printer to setup and it could not find one. The printer does work however but now I lost the feature of being able to scan something by pressing the scan button on the printer and that automatically launching the client HP program on the screen etc. I see a USB error on the printer.
I tried rebooting and the same HP setup assistant utility showed up again but could not find my printer.
So I tried to un install the HP drivers using their program to do so from the HP utility folder. It did uninstall everything but the HP setup assistance program still come up. I tried installing my old drivers from the CD and it now has the same problem .
I believe this HP setup program did not get un installed.
I would like to just get back to where I was working with the old drivers if I can find out out to remove everything related to this new HP driver install. I would then re install from my CD.
13" new MB, 2 gig memory running OS 10.5.6.
Your help is appreciated!

Just in case someone else is having this problem here is what I did which seems to have solved the problem.
1) remove the USB cable to the printer.
2) remove the printer profile from the Print & Fax section of Preferences.
3) Download the HP driver pkg from the Apple download driver section.
Run the installer and follow the directions. It will instruct you when to plug the USB cable back in.
This is what worked for me.

GD85 and New Intel SATA drivers

Intel updated thier SATA drivers for RAID so that TRIM will work correctly.
Does one of you experts know if the new Intel drivers are included in BIOS update
V1.3 07/12/2010??
Pat

Guys, I misspoke, I am not talking about the BIOS, I am talking about the Intel SATARaid drivers listed on the download website with a date of 01 2010. These are the Rapid Storage Technology drivers. I know that Intel released a new Rapid Storage Technology driver to solve a problem with TRIM when the Intel SATARAID technology is used in a RAID
mode. Basically TRIM wont work on a RAID array because of a problem in the Intel driver.
I am wondering is the 01-10 version on the download site includes the new fix.
If it doesnt can I use the Intel driver from the Intel website

New Intel HD4400 drivers for Lenovo Yoga 2 Pro?

Intel has new drivers for the HD4400 graphics chipset that's supposed to fix a bunch of issues and that's downloadable from Intel's website. Intel's update utility identifies the drivers as compatible with Yoga 2 Pro, but when attempting to install the installer aborts itself and tells the user to acquire the drivers from the "manufacturer", i.e. Lenovo.
When I check on the Lenovo site, however, there are only drivers dated October 2013.
In graphics driver age that's ancient.
So when is Lenovo allowing its Yoga 2 Pro users to update their HD4400 drivers, which in Oct 2013 were rather broken?
I'm talking about inadequate resolution scaling for the Yoga 2 Pro's high-res screen in some games, for instance, which is a pretty big issue to left unfixed. Meanwhile the Intel Update Manager that came with the Yoga 2 Pro's software bundle cannot, as of May 2014, even connect itself to the net to check for updates for whatever reason.
Solved!
Go to Solution.

I was messing around with the power saving features with the Intel Software.
Y2P (Power profile is my own doing)
-CPU @ .7Ghz
-Brightness @ one button press below 50% on the slider bar
-CPU utilization 0-1%
-Keyboard led off
-Wifi on
Panel Self refresh off
Extended battery life for gaming off
Display power saving off
= 5,600 mWh
Panel Self refresh on
Extended battery life for gaming on
Display power saving on (slider to max battery)
= 4,600 mWh
I didn't get any screen flicker but I only had it on those settings for 10 or 15 minutes
As I am typing this post with one tab in Firefox open it is running at 6,600 mWh. Windows reporting 4:22 Hr and 52% battery remaining.
Above measured with Performance Monitor .

I want to disable banner sheet in new v4 print drivers.

Hi,
I have a print server 2012 r2 on work and have installed several xerox printers on it with the new v4 class drivers.
I want to ask how can i disable banner sheet on this new drivers. Is there any powershell command to do that because i cant do that in the setings of the printer like in v3 drivers. This will save us money on paper because most of the employees print one
or two pages and the printer print another page as banner sheet.

There's a registry key that defines the separator page here:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers\<printer name>
Called Separator File. Set that to blank and restart the spooler service. If the value isn't defined there, I'd guess it's defined on the printer itself and you either have to manually adjust in on the device control panel, access
the device's internal configuration web site and adjust it there, or leverage Xerox provided APIs.
There may be a more Powershell way to configure it, but I couldn't readily find one.
That setting isn't typically defined by default, are these new printers? Are they only newly installed on your 2012 print server? I'm just as curious that a banner page is unexpectedly defined as the fact that you can't access the configuration
through the normal gui.
I hope this post has helped!

New official updated drivers from HP for Omni 10

Gone are the official drivers from HP:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4157&lc=en&cc=us&dlc=en&sw_lang=&product=6608...

Hello DayTrader,
When you connect the printer and if the message continues to say "Waiting for Connection", please try the below step..
Go to Device Manager, ( to do so , Right click on Computer icon, Select Manage, from the left pance m click on Device Manager , which would display the Device Manager on right pane.)
There should be Yellow bang entries ( Yellow ! mark ) with printer name on it.
Right Click on each of them and select Update Driver.
Select "Browse my Computer for driver software "
Click on Browse button to point to the CD ( if you are using the CD to run the installation ) else copy the path where the drivers have been extracted if you had downloaded it. Usually it will be in folder with name starting 7z... under TEMP folder .
Then Click Next button .
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

**New Official nForce Drivers from Nvidia v4.27**

grab them here
Markoul

Quote
How can I find out what version of nvidia nforce dfivers I'm using? I think I'm probably using the lastest before this version cause my board is new and had latest bios version installed on it.
previous version had the 4.31 audio driver... you better check nvmixer information tab to see what you have...
todays fast evolution will force you anyway to change drivers at some point. Days where everything ran smoothly with same set of drivers for a long period i am afraid is long gone... but yes waiting and changing drivers when it is really necessarily is actually a good bit of advice. It is your choice

Epson Printer Drivers and Leopard - Epson 740 or Epson RX700 problems

It seems even after Epson updated their printer drivers Leopard will not all me to print to my Epson Stylus Color 740 AND my Epson RX700, I must choose one over the other.
If I install the printer drivers from Apple they include drivers for the old Epson Stylus Color 740 and it works fine. The problem is it kills my new Epson RX700 printer. It still works, but I cannot print CDs.
If I delete the Epson printer drivers from my Library folder and start over with the updated Epson RX700 drivers I can print to the RX700 including to CDs, but they do not offer an Epson Stylus Color 740 printer driver beyond system 9.
I have tried installing the newer Epson RX700 drivers over top of the Apple installation but the same result happens.
Can anybody help? I need the old drivers from Apple's system 10.5 installation disk so I can print to my old workhorse Epson 740 and my Apple 630 laser writer pro. But I also would like to print to CDs using my new RX700.

I have exactly the same problem...I have submitted a query to Epson...but we all know how good support is from companies like Epson and Apple

Missing printer drivers - can't add new drivers

I printed without any problems yesterday. Last night, I applied the latest drivers via Software Update (a lengthy list that just came out within the last week, including 10.4.8) and now all my printer drivers are gone. I have 2 printers connected directly to the mac via USB, and one printer connected through the network. I have attempted to add the printers again, using newly download printer drivers from both Epson (for my R300) and from Primera (for my disc_publisher). When I attempt to add a printer, this error comes up: "An error occurred while trying to add the selected printer. server-error-service-unavailable"
I have a G5 dual 2 GHz. I have attempted all the normal troubleshooting techniques (permissions, unplug power and usb, deleting drivers and re-installing, restarting mac, etc), but am now at a loss.
Any ideas?
Thanks,
Scott
PowerMac G5 Mac OS X (10.4.7)
PowerMac G5 Mac OS X (10.3.9)

Have you tried resetting the print system? Open up Utilities->Printer Setup Utility and under the Printer Setup Utility menu, select Reset Printing System. You'll have to add all your printers again, but that should clear up most problems. Give it a whirl and post back.
Good luck!
MacBook,G5 iMac,15PB,G4 iMac, G4 QS, AX, 3G iPod, Shffl, nano,shffl Mac OS X (10.4.7)

I use an iMac running V. 10.10.2. I have an Epson WP-4530 printer. Is there a printer driver that will enable one to print photos from color negatives?

I use an iMac running V. 10.10.2. I have an Epson WP-4530 printer. Is there a printer driver that will enable one to print photos from color negatives?
I have already tried downloading the drivers from Epson as per one person's suggestions, but the dialog box isn't anything like what was suggested--the choices in the box weren't the same for the most part. I don't want to lock up the computer or disable the printer for normal printing, but I have a lot of old negatives that I would love to have prints from.

I am using the latest software from Epson for Mac OS 10.10.2 that I downloaded last week. I seem to remember that the older software (we're talking 6-8 years ago) had to option to scan slides or negatives and would convert the results into positives via the scanner. I don't like the most recent scanning software because it jumps right into the scan before giving you a chance to change the options. It uses the selected options from the previous scan which are sometimes right, sometimes wrong. Thanks for your reply to my question!

Epson Printer Drivers

I'm looking for the newest drivers from Epson for a Stylus Photo 2200, The gutenprint version of the drivers doesn't work well with Adobe Lightroom, after contacting Epson they stated that the drivers are on the 10.5 DVD, and if it's using the gutenprint drivers still, to contact apple.
Short version: I need the non gutenprint drivers (.ppd?) for an Epson 2200.

The Gutenprint drivers are a package. You can download the latest version at VersionTracker or MacUpdate. However, I wouldn't expect much of a change. Epson's own drivers would be found at their web site.

New intel printer drivers from epson

Similar Messages

Maybe you are looking for