New internal hard drive and now cannot migrate from back up

Took my MacBook Pro in yesterday to have it looked and found out hard drive was failing.  Had already backed up via Time Machine onto my iomega external drive before I took my laptop to Apple store.  I have been backing up for several years to the iomega drive.   Got my MacBook Pro back today, and brought it home--awesome work by Apple store, even had it done yesterday before I made it back home from dropping it off. 
So, here is the deal, turned it on, went through the steps required and got to the migration part.  It recognizes that my iomega drive is connected to the laptop as the icon is on my desktop.  However, the migration assistance cannot find the drive and just keeps spinning.   Any suggestions before I set up another genius bar appointment?
Thanks
Michael

William Beede wrote:
In my case I backed up my old internal hd to my new external 1 TB hd.
Surely you mean you used +Setup Assistant+ or +Migration Assistant+ to transfer the data? Or a "clone" via CarbonCopyCloner, SuperDuper, or Disk Utility?
Now it appears TM wants to ADD the contents of my new internal hd to those already backed up(another 220 gb).
Yes. As posted, to TM it's a new, different drive. TM will back it up. You cannot prevent it.
I wonder if I need to format the new drive and start over??
Yes, that's probably your best bet.

Similar Messages

  • Upgrade Internal Hard Drive and Time Machine runs first back up as new full

    I recently upgraded my internal hard drive on my macbook to a larger and faster model, my old one is still fine. I went to run a Time Machine back up and it starts a new back up even though its not supposed to. How do I get it to recognize the old / original back up instead of running a new full back up on the new internal hard drive?

    William Beede wrote:
    In my case I backed up my old internal hd to my new external 1 TB hd.
    Surely you mean you used +Setup Assistant+ or +Migration Assistant+ to transfer the data? Or a "clone" via CarbonCopyCloner, SuperDuper, or Disk Utility?
    Now it appears TM wants to ADD the contents of my new internal hd to those already backed up(another 220 gb).
    Yes. As posted, to TM it's a new, different drive. TM will back it up. You cannot prevent it.
    I wonder if I need to format the new drive and start over??
    Yes, that's probably your best bet.

  • I installed a new bigger hard drive and now spotlight does not work with outlook to search for emails

    My old hard drive was full so I went to an apple authorized provider to install a new bigger hard drive. They also moved the data and applications from my old drive to the new one. They did not use time capsule because their way was faster. After the installation I did have to reenter the product code key for Office 2011 for the Mac. However, now I find that I cannot do email spotlight searches in Outlook. When I put in the search - it comes up with no results. This is true no matter what the search. Any ideas of how to point spotlight to look in the email folders so I can do searches again. This is a feature I use daily - so I am concerned that I have lost this feature. Also, I am noticing that alot of the settings did not carry over to the new hard drive. Any help is greatly appreciated!

    I would recommend starting over and migrate using your Time Capsule backup however DO NOT do it wirelessly, connect using an Ethernet Connection. If you upgraded to Lion from Snow Leopard then follow the instructions in this video, the kid is annoying but he knows what he's doing. Clean Install Of Snow Leopard video. Once you have installed and updated Snow Leopard then update using the 10.6.8 Update Combo, then log into the Mac App Store and re-install Lion and all it's updates. My guess this is an afternoons work.

  • New Internal Hard Drive and Clean Install: Errors, Frustration and Hopelessness

    First Off:
    Macbook 13" (late 2009) ... It was running Mountain Lion 10.8.5 with 2 gigs of memory and 160gig stock hard drive.
    I started this process almost a week ago and despite numerous attempts every night I have had no luck. I appologize if the details here are fuzzy, my head is spinning after reading dozens of threads and attempting multiple solutions to each error I've received and i cant remember everything I've tried so far...
    I got my new memory in the mail first, upgraded to 4 gigs and everything works fine with that..
    Next came my new Seagate Momentus 750 gb 7200 rpm SATA 3gb/s 16Mb Internal Hard Drive.
    Using this guide: http://osxdaily.com/2012/02/17/make-bootable-os-x-10-8-mountain-lion-usb-install -drive/ (and cross checking other guides) I ended up creating a bootable external drive using my 160gb External Firewire drive for my clean install to my new hard drive. So far so good.
    I then shut down the computer, removed the old internal hard drive, installed the new, restarted the computer holding option key and booted up using the External Hard Drive, and the install software started fine. Note: I have attempted to re-erase the drive so many times without luck that I cant remember if I actually successfully erased the drive originally to begin with the installation, but either way I started the OSX reinstall and it got almost all the way finished before it gave me the error message:
    "Install failed. Mac OS X Lion couldn’t be installed, because the disk (volume name) is damaged and can’t be repaired. Click restart to restart your computer and try installing again."
    restarting of course did nothing, it repeatedly gave me error messages and made me quit installation...
    Disk Utility isnt getting me anywhere, im either getting errors like:
    "POSIX reports: the operation couldnt be completed. device no configured"
    it wont allow me to erase the drive or partition the drive
    "Disk Erase failed with the error: File System Formatter Failed"
    and everytime the drive fails to erase or partition, it disappears from the list of drives on the left of the disk utility screen and i have to restart the computer for it to reappear for a second try. Typically the volume under the drive is greyed out and says that it is unmounted.
    Ive zapped the PRAM.... and Ive done other things that I cant quite remember right now because my brain is boiling from reading too many **** threads on multiple devices....
    halp.
    halp me plase.

    So funny story...
    While writing this discussion I had to come to the computer and try to erase the drive so I could see the error code for reference. The erase didnt work as usual but I wrote the error code down here.
    I also could not remember the error code for partitioning the drive so I attempted that as well so I could write down the code, and this time it magically partitioned successfully! The only thing I did differently was that I didn't rename the partition because i figured it wouldn't matter anyway. Since the partition was successful, I attempted the Reinstall of ML and it magically worked!!
    I dont know what the **** happened but ive been attempting this install every night for like 3 hours since Monday and this is the first time it went through... for no apparent reason?
    Ghosts? Magic? Full Moon?
    we may never know...
    Thanks anyways guys!

  • I had a computer crash and Hard drive data lost, so I reinstalled Itunes on my new hard drive and now cannot locate ALL of the purchases I had done in the past.

    I thought that ALL itunes purchases were held on the Apple server for itunes.
    When I reinstalled my itunes on my new hard drive, there were NO histoical purchases on my itune account.
    Any thoughts to a solution.
    Thanks

    Make sure you have at least iTunes 10.3.1, then go to the iTunes Store, log into your account, and click the new Purchases link under the Quick Links. The new iTunes in the Cloud service may allow you to re-download your purchased content (music, videos and TV shows not available for re-downloading in all countries at this time; movies and audiobooks not available for re-downloading at all yet). You can also do this from an iOS device.
    For more information, see:
    http://support.apple.com/kb/ht2519
    Regards.

  • New internal hard drive and installing OS

    I have a 2008 iMac 20" and the hard drive had begun to fail (shutting down, stopping etc) so I purchased a new one from bookyard.co.uk and installed it, not that difficult, i have done this before on earlier 05 models.
    However, i used our family pack install disk for snow leopard and it installed just fine but when i tried to install the update that enables the mac app store and upgrade to mountain lion, it repeatedly stated the downlide file was bad and could not be installed.  I tried two different locations for the download as i had read issues about some routers with this file.
    When this failed repeatedly i decided to make a boot disk from my existing 2010 iMac 21.5" which has mountain lion, using an 8Gb USB drive, this worked fine.
    The 08 iMac boots from the USB drive fine but when i try to erase and install the mountain lion OS, it states that this cannot be installed on this computer with a yellow ! warning triangle.  I know drive replacement had to be like for like from 09 onwards but this is an early 08 iMac model.
    After this i now cannot even re-install the snow leopard from the family pack DVD.
    I have an apple genius appointment but it is a week away and this is my 8 yr old daughters Christmas gift so i was hoping to get it up and running sooner.
    any help appreciated

    If you have any data on your old hard disk, I would make sure you have a good Time Machine backup. Then create a bootable Lion USB stick (or SD card)
    http://osxdaily.com/2011/07/08/make-a-bootable-mac-os-x-10-7-lion-installer-from -a-usb-flash-drive/
    Replace the hard disk. Boot from your USB stick (or SD card) and restore your Time Machine backup.
    That's all. You will have the contents of your old hard disk on your new hard disk, without having to reinstall everything.

  • Installing Leopard and new internal hard drive at same time, best plan?

    Ok so basically the title explains what I need to do. I am currently travelling in Europe, and returning home to New York on Tuesday night. I have a new hitachi 250gb HD and will have Leopard waiting for me at home when I arrive, and will get right to doing this installation. I am writing on the discussion boards here because I am hoping the users here can give me their opinions on what is the best plan of action to do this whole install?
    So what I was thinking was, I should remove the hard drive that's already inside, put it into an external enclosure. Then, put my new blank 250gb hard drive into the macbook pro, close up the computer, then put the Leopard OSX install disk, and do a completely fresh install of Leopard. Then, after installing (or during installing?) I should run the migration assistant program to get all my files and settings etc. transferred over to the new internal hard drive with Leopard on it, from the old hard drive that will be plugged in from an enclosure as an external drive.
    Will this plan have any problems that I am not aware of? Is there a better process for doing this task? Any advice will be greatly appreciated! I am anxious to get my new hard drive into the computer because my 160gb is filling up, and dying so badly to use the new Leopard!!

    You could also put the new disk in the external enclosure, partition it using disk utility. Then make a clone of your current hard disk to the new external one using the restore feature in disk utility. Boot from the external disk and Install Leopard as an upgrade keeping all your files and setting. check everything is all running how I should and swap drives over. That's another option for you.

  • How do I reboot my Macbook pro 2011 to a new internal hard drive?

    I had to get a new internal hard drive and I can't afford to pay some one to do it for me. So I was wondering how do I install the operating system on to the hard drive?
    Thanks

    Since we don't know which MBP you have or what OS was initially installed on it, try this. Start up the Mac and hold down the Command and "R" keys. If you have an internet connection and if the MBP came with Lion installed, you should be able to boot into Internet Recovery. From there, you can download Lion from Apple's servers and install it. That's assuming the new HD has already been installed and formatted (you can format it yourself using the Disk Utility that's available in Internet Recovery).

  • Set up to save directly to external Hard Drive so cannot have separate 'back up'I now want to reverse i.e save to internal Hard Drive and 'back up' on external 'hard Drive'. Please advise me how to do this.

    Macbook Air 13 inch purchased October 2013. set up to save [mainly photos] to external 'hard drive' i.e. not saved to internal hard drive. Cannot find easy way to create 'back up'. Please advise how I can reverse i.e save directly to internal 'hard drive' and 'back up on external 'hard drive'

    For backing up your data I recommend that you use Time machine:
    http://pondini.org/OSX/Home.html
    rob at the orchard wrote:
    save directly to internal 'hard drive'
    When you import images or create other data files, file them in the appropriate places on your internal drive, don't delete them and let Time machine back them up.
    Ciao.

  • I backed up my I-tunes library (by dragging my "music" folder to my new external hard drive.  Now 6,000  songs won't play stating, "original file cannot be found."  What can I do to get these songs back???!!!

    I backed up my I-tunes library (by dragging my "music" folder to my new external hard drive.  Now 6,000  songs won't play stating, "original file cannot be found."  What can I do to get these songs back???!!!

    Try putting the files back where they were before you moved them, then follow the steps in this Apple document -> iTunes: Back up your iTunes library by copying to an external hard drive

  • After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB

    After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB
    How can i do that?

    What did you "put as slave?" What Mac model do you have, exactly?

  • HT6030 I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

    I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

    Be sure to start your iMac using its original grey System Install DVD: Insert that disc and start your Mac while holding the d key. At the Mac OS X Utilities screen select Disk Utility and format the hard disk. Select "Mac OS X Extended (Journaled)".
    Then, install OS X.

  • Can I reformat and partition a new internal hard drive with the Snow Leopard disk?

    I'm planning on installing a new internal hard drive in my 15'' Macbook Pro. Can I format and partition the new drive with the Snow Leopard disk or is it just an upgrade from Leopard? Thanks much.

    You should be able to do that.
    If you want to change the sizes of existing partitions this may help:
    Enlarging a partition

  • HT4718 I want to install a new internal hard drive for my Macbook (13in, Late 2009) and restore to factory settings. However, I want to keep my Mac OS X Snow Leopard.

    I want to install a new internal hard drive for my Macbook (13in, Late 2009) and restore to factory settings.  However, I want to keep my Mac OS X Snow Leopard., which I downloaded from the app store. How can I restore computer with the updated OS?

    What I did on our two computers was partition the hard drive so that both Snow Leopard and Mountain Lion can be used on the computers. This allowed me to be able to retain/use older applications and games on the Snow Leopard partition. This will allow you to do a clean install of Mountain Lion on the newly created partition. The Mountain Lion installer has a button that allows you to select another drive so you don't install it over Snow Leopard. I cleverly name one partition Snow Leopard and the other one Mountain Lion so I wouldn't confuse the two (I never claimed to be smart).
    To partition, you need to have sufficient free hard drive space (I suggest 50 GB minimum). Boot off the Snow Leopard DVD or the disks that came with the computer and use Disk Utility to partition your hard drive into two partitions. If you plan to make Mountain Lion your primary OS, then you can reduce the size of the Snow Leopard partition so most of the free hard drive space is available for Mountain Lion. While booted off the disk, you can install Snow Leopard on the partition you want it on.
    Restart and download Mountain Lion, remembering to select the correct partition before installing. I would make a copy of the installer and move it out of the Applications folder because the installer self destructs.
    After getting all that sorted out, I found that while booted in Mountain Lion I could access the Snow Leopard partition. That allowed me to drag files and applications from Snow Leopard to Mountain Lion. Applications that won't work with Mountain Lion will be grayed out with a slash through them.

  • Can I use my old internal hard drive and copy everything into the new one?

    My internal hard drive is running out of space, and I want to buy a new one. But to do that, I'll have to buy a external hard drive to back up everything and then copy it back onto the new internal hard drive , right? I don't have that much budget. So can I use the old internal hard drive that I took out of my Macbook and copy everthing back into the new internal hard drive after the repalecment? so I don't need to buy a external hard drive to back up everything
    Tks!

    You will have to buy a new HDD and an enclosure to make the transfer.  You can use Disk Utility to make the transfer.
    INSTALLING A NEW HDD IN A MBP
    1. Make certain that you have backed up all of your important data.
    2. You will need a HDD enclosure.  One with a USB connection will do.  A 9 pin Firewire is better.
    3. Install your new drive in the enclosure and connect it to your MBP.
    4. Open DISK UTILITY>ERASE.  From the left hand column drag the new drive into the 'Name' field.  Make sure that the format is 'Mac OS Extended (Journaled)'.  Click on the 'Erase' button.
    5. Click on the 'Restore' button (on top).  Drag the old drive into the 'Source' field and the new drive into the 'Destination'  field.  Click on the 'Restore' button on the bottom right hand corner.
      Depending upon the amount of data you are transferring, this may take a couple hours or more.  A Firewire will speed up the transfer.  This will result in both drives having identical information on them. INSTALLING
    6. After the data transfer has completed, you may swap the drives.  Start the MBP and you have finished the installation.  The initial boot may take a bit longer than you are accustomed to, but that is normal.
    7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.

Maybe you are looking for