New internal HD not recognized in LR 3

Drive is E: on a win7 desktop. That doesn't show on the left panel among the drives and isn't available for export. It is visible with the import dialogue and I was able to create a new catalog file on it. Exporting, all I can see starts with the C: desktop. No 'My Computer' or anything else. In the import dialog, with 'Copy' option, upper-right, the DESTINATION... I choose 'Other Destination' and it starts at desktop, no other drives available. In grid view I can see these drives: C: D: F: G: H: I: L: but not the E: drive I just added to the box.
How do I get LR to see my new E: drive? I rebooted everything a couple times.

There's a known bug which causes this problem, and it is caused by having too many icons on your desktop (seriously). Simple solution is to to a bit of desktop housekeeping, but you can also start typing the full path to the required drive in the "Folder" text box at the bottom on the browser box, that will bring the display of that drive back.
Best to do the desktop clean-up though, IMO.

Similar Messages

  • New-MaiboxRestoreRequest is not recognized as the name of a cmdlet, function, script ?

    I have restored successfully an exchange 2013 mailbox database from backup to the recovery database, but when i try to recover a user's mailbox I receive the following error
    New-MaiboxRestoreRequest -SourceDatabase RDB1 -SourceStoreMailbox "testuser" -TargetMailbox [email protected]
    The term 'New-MaiboxRestoreRequest' is not recognized as the name of a cmdlet, function,
    script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
     I already have the "mailbox import export" management role assigned to the logged in administrator.
    Anand_N

    silly me i spelt the command wrong
    Anand_N

  • I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.

    I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.
    Here is the information I have. The external hard drive is a 120GB Acomdata. It has both USB and Firewire. When I go to plug in to the mac mini through USB, it is not being recognized. When I switch to Firewire on the old computer I can see it, however when I go to USB it is not being recognized (even on the old computer).
    I'm at a loss as to what to do. Any advice would be helpful.

    Shalese wrote:
    Have you ever tried the FW 400 to 800 adapter?
    I have used them on multiple occasions and they work just fine.
    Try this (maybe you already have):
    -Boot Mini with drive disconnected.
    -Do not connect drive but turn it on
    -wait a few seconds for drive to spin up
    -plug cable into the Mini then into drive.
    This is an old drive and may have some timing
    issues.
    I had an Acomdata drive a long time ago.  It
    worked fine with FW but USB was flakey.

  • I just bought the latest ipod shuffle to use with another older one. But when I tried to download updates and charge the new shuffle it is nowhere to be found. The new download is not recognized

    I just bought the latest ipod shuffle and want to put my library songs on it. Why when I tried to install the latest version of i-tunes nothing happened. My new pod is connected to my laptop USB 2.0 port but it is nowhere to be found. Why is this new shuffle pod not recognized?

    You downloaded iTunes AND installed it, right?  What you downloaded is the installer, which installs the iTunes app (and other things like drivers) on your computer.  You then have to run the iTunes app.
    If you did that already, make sure the USB docking cable's plug is completely inserted into the shuffle's headphones jack, as shown in this document
    http://support.apple.com/kb/TS3572
    When connected, the shuffle's light should come ON.  That indicates it is getting power.  If it blinks orange (at least initially), that indicates it is connecting for data.
    If you are good so far, in iTunes, the sidebar (along left side of window) may be hidden.  If it is, from the menu bar, under View, select Show Sidebar.  When the shuffle is connected, it should be listed in the sidebar, below DEVICES. Does it appear there?

  • The term 'new-object' is not recognized as the name of a cmdlet, function, script file, or operable program.

    I have a script that runs well the vast majority of the time.  On occasion I get an exception.  I would appreciate any insight as to why it fails on occasion.  I can't understand why the new-object cmdlet wouldn't be recognized:
    Message: The term 'new-object' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    Source: System.Management.Automation
    StackTrace:    at System.Management.Automation.CommandDiscovery.LookupCommandInfo(String commandName, CommandTypes commandTypes, SearchResolutionOptions searchResolutionOptions, CommandOrigin commandOrigin, ExecutionContext context)
       at System.Management.Automation.CommandDiscovery.LookupCommandProcessor(String commandName, CommandOrigin commandOrigin, Nullable`1 useLocalScope)
       at System.Management.Automation.ExecutionContext.CreateCommand(String command, Boolean dotSource)
       at System.Management.Automation.PipelineOps.AddCommand(PipelineProcessor pipe, CommandParameterInternal[] commandElements, CommandBaseAst commandBaseAst, CommandRedirection[] redirections, ExecutionContext context)
       at System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[] pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext funcContext)
       at System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame frame)
       at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
       at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
    Here is the script I am running:
    param([string]$endpoint)
    $ErrorActionPreference = "Stop";
    try
     [System.Reflection.Assembly]::LoadFile("D:\dotNET_Apps\dotNETCOExBatch\DotNETCOExBatch\bin\DotNETCOExBatch.dll")
     $schedule = new-object DotNETCOExBatch.CallService
     $reply = $schedule.CallWebService($endpoint)
     if ($reply)
      $host.setshouldexit(0)
     else
      $host.setshouldexit(8)
    Catch
     $nl = [Environment]::NewLine
     $evt=new-object System.Diagnostics.EventLog("Application")
     $evt.Source="BatchPowerShell"
     $infoevent=[System.Diagnostics.EventLogEntryType]::Error
     $batchException = $_.Exception
     $logMessage = " "  
     while ($batchException)
      $exMessage = $batchException.Message
      $exStackTrace = $batchException.StackTrace
      $exSource = $batchException.Source
      $logMessage += "$nl $nl Message: $exMessage $nl $nl Source: $exSource $nl $nl StackTrace: $exStackTrace" 
      $batchException = $batchException.InnerException 
     $evt.WriteEntry(" Error starting or process cancellation of $endpoint $logMessage",$infoevent)
     $host.setshouldexit(15)

    Hi,
    Please close your current powershell console, and start a new Window, and then check the result.
    Like David replied, this is a strange issue, hard to find the cuase, but I will report the issue, hope
    someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
    Regards,
    Yan Li
    TechNet Subscriber Support
    If you are
    TechNet Subscription
    user and have any feedback on our support quality, please send your feedback
    here.
    Cataleya Li
    TechNet Community Support

  • The term "New-MailboxExportRequest" is not recognized.

    Hi,
    I'm trying to backup the mailboxes on my exchange server 2010 running on server 2008 R2 using the script from Steve Goodman (http://www.stevieg.org/2010/07/using-the-exchange-2010-sp1-mailbox-export-features-for-mass-exports-to-pst/)
    I followed every step that is described in the tutorial. But if I run the script I get: The term "New-MailboxExportRequest" is not recognized as the name of a cmdlet, function, script file, or operable program.
    The permissions for the folder are: exchange trusted subsystem, administrators Full control. I ran the command
    "New-ManagementRoleAssignment -Role "Mailbox Import Export" -User Administrator" in the powershell of exchange. I tried exporting a single mailbox to PST but I got the same error. Nothing seems to work.
    Does anyone know a solution? Help would be appreciated.
    Cheers

    Hi Sturme,
    I suggest you follow this document use New-MailboxExportRequest to export the mailbox, then check whether this issue will occur or not.
    New-MailboxExportRequest
    http://technet.microsoft.com/en-us/library/ff607299.aspx
    If you want to use the script from Steve Goodman, please paste the exact error you get (when you run it in Exchange Management Shell ).
    Thanks,
    Evan
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • New IPOD nano not recognized by computer

    I have a brand new IPOD 3rd Generation. I have windows XP. When it is plugged into the port neither computer recognizes it. I stopped and restarted the service but that did not work either. Any suggestions?
    Thanks
    Jgalli

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Patrick

  • New ipod video not recognized by my computer at all

    i have an ipod mini and itunes on my windows xp computer. i just bought the new ipod video that it is not recognized by my computer at all. i plug it in and the entire computer freezes. if i plug in my mini everything works fine.
    i have tried updating/uninstalling my new ipod video. i am worried that if i uninstall itunes that i will lose my purchased music.
    does anyone have any suggestions as to what i should do? does anyone have the same problem as me? i really want to start using my new ipod help please.

    I assume you have installed the iPod driver, before connecting the 5G iPod. It is possible the device driver for the mini is different, and thus confusing your computer. The iPod driver is on the CD that came with your 5G iPod (iPod with Video)

  • New DVD drive not recognized on my Satellite Pro 4600

    Hi all,
    I have recently bought a brand new NEC ND-6650 DVD writer.
    This drive is NOT recognized by my Satellite Pro 4600, at all - neither Windows 2000 nor in the BIOS (v 2.60). Bios updates higher than version 2.60 are not provided.
    Does this mean I can forget about using the new writer in my old notebook?
    Thanks and best regards,
    Nils

    Hi Nils,
    I suspect that your new drive may be not be compatible with your notebook. As with all optical drives your new drive will be configured as either Slave or Master (or possible cable select), and this configuration must match your notebook.
    Usually your hard drive will be configured as Master on IDE channel 0 with your optical drive being the slave device on the same channel. However, you may find that your optical drive is configured as Master on IDE channel 1.
    Normally the setting is pre-configured by the manufacturer so you will need to check both the conficuration of your new drive and the configuration of your original drive to make sure that they are the same.
    regards,

  • New Operating System Not Recognizing Hard Drive

    I recently upgraded my MacBook Pro's operating system to a OSX Maverisks and afterwards, my computer no longer recognized my Toshiba hard drive. Why is this and what can I do to fix it? Thanks!

    Hi, Mark:
    Is your new hard drive being recognized in the BIOS? 
    If not, none of the info you posted matters. There are no drivers needed for the BIOS to recognize that a hard drive is installed.
    If you are trying to install windows vista or windows 7 using microsoft OEM DVD's, again, there are no drivers to install as they are included with the installation disk.
    If you are trying to install W7 with a set of HP recovery disks, you may need this patch:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&lc=en&dlc=en
    If you are installing windows XP, the information you posted applies. XP does not have the SATA drivers necessary to install the operating system.
    If you are installing XP, I will send you the link to the SATA ACHI drivers you need.
    Paul

  • Updating my podcast to new location, iTunes not recognizing new feed(48hrs)

    Hi Podcasters,
    I've been googling and reading about this the past few hours but I'm still at a loss. On Monday I moved my podcast - Pod Stories: Tales for everyone, which has been on iTunes since May 2007, to a new location. It's is the first time I've done this. The podcast and all the files therein is now located in my Sites folder on my iDisk.
    Upon moving I changed my cover art and republished the audio files using the Podcast Maker software. It automatically 'pinged' to iTunes once completed.
    It's been 48hrs and there is still no update on iTunes. I did the ping posted by Roger Wilmut1 using my iTunes i.d and it still came back stating the old url. I then did the second ping to the feed directly and it said podcast does not exist..?
    I've read on Apple about a new feed URL command but to the life of me I really don't get it or understand how it's supposed to be done. Podcast Maker does everything for me and I can't read the raw .xml file.
    It would be fab if someone in-the-know could help me out or explain things in a way I can grasp I am a techy but when it comes to coding/commands etc it's all a blur
    My iTunes specific podcast number is: 253350746
    My latest feed from Podcast Maker is: feed:file:///Volumes/io.creative/Sites/Pod-stories/podstories.xml
    Cheers in advance. Hope this can be fixed up soon....
    Marc

    Hi Roger,
    I made the change the day you posted the reply to this post. So it's been 5 days already...
    The URLs I copied into the original post came from Podcast Maker, I just pasted directly from the software. The new URL/feed is the io.creative one - the address is on my iDisk which I got with my Mac Me.com account.
    Podcast Maker allows to feed directly to the 'sites' folder in the iDisk, does it automatically. The old URL feed is on a friend's company server. But now that I have this iDisk I thought best to move over the podcast to there.
    Thanks for the example. So i paste it into the top line of the channel section in the old .xml file? Do I leave the original feed address in the file or replace it with the new one? This area is not very clear in the Apple docs online.
    I have both podcasts at the Lemonz website
    New Feed:
    http://www.lemonzdream.com/podcasts/?feed=http://homepage.mac.com/io.creative/Po d-stories/podstories.xml
    Old Feed:
    http://www.lemonzdream.com/podcasts/?feed=http://www.larasethno.com/podcast/pods tories.xml
    Of course at present the new feed is not yet on the iTunes directory.
    Cheers, Marc

  • New computer itunes not recognizing my iphone

    Greetings,
    I just bought a new Intel core i5 imac, and set up the new itunes to connect to my library which was located on an external drive. The transfer went smoothly and everything works fine except that the new itunes does not register the existence of my iphone when I connect it to the computer. For the moment I am unable to sync the phone. I looked in iTunes>Preferences>Devices and my phone is listed (5 times) in the Device Backup list. Any ideas how I can get iTunes to recognize my iphone?
    Thanks in advance,
    Peter

    Solved it thru more google search. Just re-downloaded the latest version of itunes (no need to uninstall first). That did the trick.

  • I have a new pc--nano not recognized

    Hi there.  I have anew PC, installed itunes and it detects that there is a device, but does not identify it.  It's an older nano..not sure what generation.  I tried uninstalling, reinstalling, unplugging and replugging my device.

    Hi Betty,
    If you are having issues with your iPod not being recognized by iTunes, you may find the following article helpful:
    Apple Support: iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Regards,
    - Brenden

  • New Optical Drive, Not Recognized

    New optical drive replaced in a Satellite 5205-S503. The previous drive was recognized, powered up, but recently played nothing. I replaced it with another TEAC DW-224E. This drive powers up when I place a CD in it, but is not being recognized. I did not think I needed drivers because I am using Windows XP Pro. Because it is clearly powering up and spinning a disc, I am assuming that it has been connected properly internally.
    Help!

    Satellite 5205-S503 
    Did you follow instructions like those here?
       How to remove and replace laptop DVD/CD-rom drive
    Open Device Manager and expand DVD/CD-ROM drives. Can you see the drive there? If so, right-click it and click Uninstall. Reboot to reinstall the driver.
    -Jerry

  • New ipod nano not recognized by itunes

    hi,
    okay today i got a new ipod nano, i plugged it into the computer and the computer recognized it but itunes didn't. I tried troubleshoot and reinstalling itunes and nothing. My ipod says connected but thats it and it freezes when i reconnected to diffirent usb ports. what should i do? help!!!!!!!
    Message was edited by: ariz426

    I supposed you have downloaded and installed iTunes 7 on your PC.
    It can be either a problem of your PC or the iPod, let have a prove.
    Try to find any computer (of course with iTunes preinstalled), if your iPod showed up there, then it is a problem on your computer, read this
    http://docs.info.apple.com/article.html?artnum=93716
    If your iPod does not show on any computer, then bring it back to the shop

Maybe you are looking for