New internal SATA Drive can't access internet or e-mail

I'm re-posting this since it never got resolved, but I've paraphrased to try keep it more concise:
I recently added an internal 500GB SATA drive (and PCI card) to my G4 (partitioned 100GB for apps and remainder for storage). The old HD is running OS X 10.2.8, and I initialized the new HD with a fresh version of 10.3. I set up my Network settings exactly as they are on the old HD (at least I'm 99% sure), but I'm unable to access the Internet and set up e-mail from the new HD. In fact, the new HD doesn't seem to recognize any of my peripherals (DVD burner, printer, cable modem, etc.).
At first I got an error claiming an IP address couldn't be found. So I changed the TCP/IP Config from DHCP to manual DHCP just to see if the status changed, which it did: "Built-in Ethernet is currently active and has the IP address [IP]. You are connected to the internet via Built-in Ethernet"; but it still didn't work.
And when I tried to set up e-mail, I got this error:
"The POP server “mail.[ISP].net” is not responding. Check your network connection and that you entered the correct information in the “Incoming Mail Server” field. If it still doesn’t respond, the server might be temporarily unavailable. If you continue, you may not be able to receive any email."
FYI - the IP address is in the 192.168.0.0 through 192.168.255.255 range, and both e-mail and internet access work fine on the original (10.2.8) drive.
I know I'm doing something wrong, but can someone help me figure out what? Should I have installed 10.2.8 on the new HD first, and then upgraded it to 10.3?
New HD: 500GB Maxtor MaXLine Pro 500 SATA II 3.0 Gb HD (16MB buffer, 7200 RPM)
New PCI Card: OWC Serial ATA 2-Channel PCI/PCI-X Controller

Resolved this issue by other means.

Similar Messages

SMART failure on internal SATA drive - Can I recover data or disable SMART?

Hi
One of my internal SAT drives (a Western Digital RE2 500gb drive) appears to be giving up the ghost and is reporting a SMART failure. The drive is mounting and shows that it has 100gb available but I can't access the data held in the missing 400gb.
I've run a TechTool report on it which has come back stating a failure on the following 2 points out of 15 tests:
• Reallocated Sector Counts
• Seek error rate
Appreciate that the drive is on its way out but is there anything i can do do retrieve the 400gb of data on it now before is completely dies? Can SMART be disabled on that drive to allow me to access it?
Any help would be appreciated.
Mark

It's not that SMART is preventing you from accessing it, the drive has had a physical failure. It may be possible to recover some data with a data recovery tool, like [Data Rescue|http://www.prosofteng.com> or [File Salvage|http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1], or you could send it off to a data recovery service, but there are no guarantees. If the data on that drive is not backed up, I'd guess you're about to learn a painful lesson about backups.

New Ipod Touch 5g can't access Internet in home network (using Linksys E4200 router). But, OK with other Wifi.

Just bought new Ipod Touch 5g. I found out it can't access Internet in home network. not really cannot access, but very slow to open any web page, App Store failed to access, etc. But, OK with other Wifi (office & starbucks). Others existing iOS devices (Iphone4 & Ipad2) have no problem like this. I'm using Linksys E4200 router at home. anyone has any idea why?

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Can't Access Internet or E-mail but Skype Works

I am no longer able to access the Internet using Safari or Firefox and cannot send or receive e-mail using the Mail application. However, Skype works which indicates there is an Internet connection. Attempts to ping Internet locations fail. I also have a Windows XP computer which is able to connect to the Internet using the same Internet connection as my MAC. I am stumped on this one.
Has anyone else experienced this? Any help is appreciated!!
Lance

Resolved this issue by other means.

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

If you right mouse and select Get info it will show you the Apple ID used to purchase these songs.
Usually the name of an apple id is based on the email. So knowing that you may have forgotten the Apple ID password.
You can request a new password here http://www.apple.com/support/appleid/

10.5.8 to 10.6 Can I use an internal SATA drive in my MacPro for back up..

10.5.8 to 10.6 Can I use an INTERNAL SATA drive in my MacPro for back up..
or must I use an External hard dive.
I prefer to use an internal for anti "desk-clutter" purposes. I am looking
at a 2TB drive to install into my Mac Pro tower for the purpose of back up
and time machine i guess.
Also.. if doing a clean install of 10.6 how do i restore the backed up apps
without re-registering all of them?

A clone is a functional copy of the original, including the internal links & setting that makes it bootable if the original is. Time Machine will not make a clone of a volume, nor will a Finder copy. You can make a clone with the appropriate settings in the "Restore" tab of Disk Utility but many users find purpose-designed cloning utilities easier & simpler to use. The two most popular of these are SuperDuper! & Carbon Copy Cloner. Both are very reliable, easy to use, & well documented.
I prefer SuperDuper! for reasons that are not important here. However, even if you decide to use CCC, I suggest that you download SuperDuper! just to read the extensive documentation that comes with it.

Can I reformat and partition a new internal hard drive with the Snow Leopard disk?

I'm planning on installing a new internal hard drive in my 15'' Macbook Pro. Can I format and partition the new drive with the Snow Leopard disk or is it just an upgrade from Leopard? Thanks much.

You should be able to do that.
If you want to change the sizes of existing partitions this may help:
Enlarging a partition

New internal hard drives, seems slow with Logic 8, how can i test

Hi,
I just bought a new internal hard drive, but it seems subtley too slow!,
On a Logic 8 song i'm working on the tracks timing seems slightly off, it's kind of driving me crazy because at times it is subtle, and other times obvious.
and 2 other things, one is an iTunes playback stalled twice, and that's never happened before,
also, when working on a Word doc, the screen was not re-drawing properly. i had to repeatedly reisze the doc window to get it re-draw itself. this has never happened before either.
is there a way to test this new hard drive?,
thanks

There are though all the ones I've used, TechTool Pro, Disk Utility, Intech Speedtools, none were 'perfect' or as good as the vendor's own utility which runs on Windows.
But you might do something for us - include the drive make/model version, and, do a look up with Google and see if you get any helpful hits.
How you have your system setup, number of drives and organization of files, can also have an impact.
Off hand, WD Caviar 640GB is cheap and fast, or there are some 1TB drives that look good, too.
Drives do break in over a period of days or first week, and it can help to break in and torture, zero the entire drive, run media scan, use a benchmark utility to graph I/O over the full drive.
Check out Barefeats, they do a bit of drive testing benchnmarks and see what they use and results. Or Tom's Hardware.

I installed a new airport express and made it part of my existing home network... now the PCs can't access internet through the airport extreme or the cisco access points

Everything works perfect with Macs, iPhone, iPads but I have 2 pcs that now can't access internet. The PCs connect to the airport and my other access points but no internet- The PCs sent an error of DNS

Yes, as we already said, it will do all of this if you have a good wireless signal reaching the bedroom.
Remember that an extender or repeater or whatever you want to call it can only extend the quality of signal that it receives.
The Ethernet signal that the Express delivers will only be as good as the quality of the wireless connection between the AirPort Extreme and AirPort Express.
If you have doubts, make sure that you understand the store's return policy before you buy.

How do I reboot my Macbook pro 2011 to a new internal hard drive?

I had to get a new internal hard drive and I can't afford to pay some one to do it for me. So I was wondering how do I install the operating system on to the hard drive?
Thanks

Since we don't know which MBP you have or what OS was initially installed on it, try this. Start up the Mac and hold down the Command and "R" keys. If you have an internet connection and if the MBP came with Lion installed, you should be able to boot into Internet Recovery. From there, you can download Lion from Apple's servers and install it. That's assuming the new HD has already been installed and formatted (you can format it yourself using the Disk Utility that's available in Internet Recovery).

HT4718 I want to install a new internal hard drive for my Macbook (13in, Late 2009) and restore to factory settings. However, I want to keep my Mac OS X Snow Leopard.

I want to install a new internal hard drive for my Macbook (13in, Late 2009) and restore to factory settings. However, I want to keep my Mac OS X Snow Leopard., which I downloaded from the app store. How can I restore computer with the updated OS?

What I did on our two computers was partition the hard drive so that both Snow Leopard and Mountain Lion can be used on the computers. This allowed me to be able to retain/use older applications and games on the Snow Leopard partition. This will allow you to do a clean install of Mountain Lion on the newly created partition. The Mountain Lion installer has a button that allows you to select another drive so you don't install it over Snow Leopard. I cleverly name one partition Snow Leopard and the other one Mountain Lion so I wouldn't confuse the two (I never claimed to be smart).
To partition, you need to have sufficient free hard drive space (I suggest 50 GB minimum). Boot off the Snow Leopard DVD or the disks that came with the computer and use Disk Utility to partition your hard drive into two partitions. If you plan to make Mountain Lion your primary OS, then you can reduce the size of the Snow Leopard partition so most of the free hard drive space is available for Mountain Lion. While booted off the disk, you can install Snow Leopard on the partition you want it on.
Restart and download Mountain Lion, remembering to select the correct partition before installing. I would make a copy of the installer and move it out of the Applications folder because the installer self destructs.
After getting all that sorted out, I found that while booted in Mountain Lion I could access the Snow Leopard partition. That allowed me to drag files and applications from Snow Leopard to Mountain Lion. Applications that won't work with Mountain Lion will be grayed out with a slash through them.

Importing FROM external hard drive to new internal hard drive

How can I move my backed up Itunes library from my external hard drive to my new internal hard drive? I went through the steps listed on the support page, and imported the .xml playlist that I moved to the desktop. Now all my playlists (names only) are on Itunes, but there is no content. Help?

lksj wrote:
How can I move my backed up Itunes library from my external hard drive to my new internal hard drive? I went through the steps listed on the support page, and imported the .xml playlist that I moved to the desktop. Now all my playlists (names only) are on Itunes, but there is no content. Help?
assuming you moved the whole iTunes folder to your new internal HD, try this:
launch iTunes with the options key pressed. this window will appear
click +choose library+ and navigate to the _iTunes library file_ on your internal HD.
any luck ?

Installing Leopard and new internal hard drive at same time, best plan?

Ok so basically the title explains what I need to do. I am currently travelling in Europe, and returning home to New York on Tuesday night. I have a new hitachi 250gb HD and will have Leopard waiting for me at home when I arrive, and will get right to doing this installation. I am writing on the discussion boards here because I am hoping the users here can give me their opinions on what is the best plan of action to do this whole install?
So what I was thinking was, I should remove the hard drive that's already inside, put it into an external enclosure. Then, put my new blank 250gb hard drive into the macbook pro, close up the computer, then put the Leopard OSX install disk, and do a completely fresh install of Leopard. Then, after installing (or during installing?) I should run the migration assistant program to get all my files and settings etc. transferred over to the new internal hard drive with Leopard on it, from the old hard drive that will be plugged in from an enclosure as an external drive.
Will this plan have any problems that I am not aware of? Is there a better process for doing this task? Any advice will be greatly appreciated! I am anxious to get my new hard drive into the computer because my 160gb is filling up, and dying so badly to use the new Leopard!!

You could also put the new disk in the external enclosure, partition it using disk utility. Then make a clone of your current hard disk to the new external one using the restore feature in disk utility. Boot from the external disk and Install Leopard as an upgrade keeping all your files and setting. check everything is all running how I should and swap drives over. That's another option for you.

How big a internal hard drive can I install in a G5 Powermac

Model Name:          Power Mac G5
Model Identifier:          PowerMac11,2
Processor Name:          PowerPC G5 (1.0)
Processor Speed:          2 GHz
Number Of CPUs:          2
L2 Cache (per CPU):          1 MB
Memory:          4.5 GB
Bus Speed:          1 GHz
Boot ROM Version:          5.2.7f1
How big a internal hard drive can I install in a G5 Powermac

2.1 TB for certain & some 3 TB drives work if Partitioned to less than 2.1 TB but then it must be GUID instead of APM, most important is if it is SATA I 1.5Gb/sec compatible.

What Internal hard drive can I use to upgrade my macbook pro 2010

what Internal hard drive can I use to upgrade my macbook pro 2010

You may use any 2.5" SATA notebook drive not higher than 12.5 mm that uses either 1.5 or 3.0 Gb/s interface. Visit OWC for available options and prices.

New internal SATA Drive can't access internet or e-mail

Similar Messages

Maybe you are looking for