New ios 7 have problem with news stand, I cannot grab the news stand to get back home as usual gesture.

Usually when I want to get back to home, I just grab it with 5 fingers and its going home, but it doesn't happen when it comes to news stand. Can anyone fix it?

hi, I,ve also isues with Newstand........when I open it whatever I do I cannot get back to my app home page page.......double clicking the home button does not work, swiping from any other direction does not work, pinching does not work....the only thing that works is turning off the power!!!!
otherwise LOVE IOS 7

Similar Messages

  • TS1398 I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT1871 Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Could it be because the SIM card got damaged while I cut it to fit the IPhone?
    Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
    Or somehow the Chinese carrier found out and locked it?
    No, which is not possible.
    What can I do? Get a new SIM and see if it works again?
    Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget.

  • I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

    I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

    http://www.apple.com/support/itunes/contact/

  • Does anyone have problems with iTunes movie rentals freezing in the middle of the movie?

    Does anyone have problems with iTunes movie rentals freezing in the middle of the movie, requiring a force quit, which causes your rental to disappear? This has happened multiple times to me recently. Last time Apple didn't refund my money after reporting the problem. I have been using iTunes for many years but am about to give up.

    Correction: I was refunded for the previous movie freeze.

  • TS1559 i have problem with my iphone as it is disable and need to get all my data as the phone needs at least 40 years to enable accessing it

    I have problem with my iphone as it is disable and need to get all my data as the phone needs at least 40 years to enable accessing it

    If you have never connected the phone to iTunes and backed it up or used iCloud to backup your data, it is lost at this point.
    The only way to get back into the phone is to restore it.
    ~Lyssa

  • HT4859 I have problem with my IPAD2, there is meesage that IPAD hasn;t been backed up in 1 weeks. Backups happen when this IPAD is plugged in, locked, and connected to Wi-Fi. And then I press OK below those message, but nothing happen and can't do anythin

    I have problem with my IPAD2, there is meesage that IPAD hasn;t been backed up in 1 weeks. Backups happen when this IPAD is plugged in, locked, and connected to Wi-Fi. And then I press OK below those message, but nothing happen and can't do anything too. I push start button, they appear but still "can't reach them". Anybody knows how to fix it back to normal?

    Go to Settings, iCloud, and then Storage and Backup.  You will then see a button to backup your iPad.  It may be that you have much stuff (i.e. photos, apps) for it to do a full backup but you will be able to tell what the estimated backup should be and what it will consist of so that you can choose to prune down items.  If you don't want to backup and get rid of the messages you can just turn backup off from this area as well.

  • I HAVE PROBLEMS WITH LION 10.7.1 AND THE PRINTER EPSON STYLUS TX515FN, DOES SOMEBODY KNOW IF IT IS POSSIBLE TO BE USED?

    I HAVE PROBLEMS WITH LION 10.7.1 AND THE PRINTER EPSON STYLUS TX515FN, DOES SOMEBODY KNOW IF IT IS POSSIBLE TO BE USED?

    Yes it is, you must install the driver. Download the driver from here here:
    http://www.latin.epson.com/v4/asp/soporteDrivers.asp?idProducto=C11CA49212

  • I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    Ask your question in an iPAD forum.
    This is the OS X Mountain Lion forum.

  • I have LR 4 and now I cannot open the software because I get this warning: light room cannot start because it cannot create files in the temp file location.. C:/windows/temp. How do I fix this? I have removed and downloaded LR and even used by disc and st

    I have LR 4 and now I cannot open the software because I get this warning: "light room cannot start because it cannot create files in the temp file location. C:\windows\temp\". I think I need to have LR open in a different place but I have no idea how to do that. Any help is most appreciated.
    Alex

    Jim
    Thank you for your prompt reply. Unfortunately I am not that tech oriented and
    cannot easily find that folder. I did notice when I was booting up the LR software
    that I could accept the site where LR usually is set up or choose a place. I am
    thinking that the standard location for LR software is corrupted and that if I
    chose a different place it would work. I say this because whether I use my
    original disc or download from adobe I get the same warning. I have 100GB of
    memory on the hard drive and I have cleaned the computer with Mcaffee and free
    software. What should I do next? I can't use this software and I doubt LR 5
    would open up with my current problem.
    Alex

  • Since upgrading my Macbook pro with Yosemite, I have problem with my Xerox Work Centre 3045 - the printer works normally but it does not recognise the scanner, can you help with this?

    Since upgrading my Mac book pro with Yosemite, I have problems with my Xerox Work Centre 3045 printer. The printer works normally but it does not recognise scanner, I can not scan anything. Can you help?

    Open Disk Utility and select your hard drive, then Repair Permissions, it will probably return a very large number of errors, primarily printer and library errors, so run it a second time.  Then restart the MacBook Pro.  If it still will not scan, try using Image Capture from Finder > Applications and see if that will work.  If not, contact Xerox about updated drivers.

  • Hello i have problem with mi iPhone I'm forguet the password

    Hi problem with my iPhone his is no conect to any line because i changed las november for other phone but the problem is because i put new pasword for any body touch but i forguet the that if you can help me please in this ipone i havent Apple acount

    Hello Josefina
    If you forgot the passcode for your iPhone, then check out the first article to help your restore it to get your iPhone back up and running.  If it is for your Apple ID and need that password reset, then follow the second article.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Apple ID: If you forget your password
    http://support.apple.com/kb/ht5787
    Regards,
    -Norm G.

  • Hi, I have problem with starting up my macbook pro, the gray screen coming and the circle still turning

    hi
    Could u please help me with the problem that I have with starting up my macbook pro?

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • I have problems with my charger. Because of the frequent use the wire was bended and damaged near the charger block.

    I want to know why the device which is mobile and easy to use has such fragile.
    Due to my work I have to travell a lot. I use my favorite Mac Air almost 24 hours per day.
    Unfortunately, after 10 months of usage the charger broke. The wire of the charger bended and damaged.
    I'm wondering why the charger for this great mobile device - Mac Air is not stable enough to carry its usage.
    I'm asking the Apple Support Team to help me and replace the charger.
    Thank you.

    I travel a lot too.
    You have to use common sense when handling anything with a power cord. With careful use they will last for many years. Mine have.
    Read:
    Using and maintaining your Apple MagSafe Adapter
    http://support.apple.com/kb/HT5234
    Reducing cable strain on your MagSafe power adapter
    http://support.apple.com/kb/HT1630

  • Problem with ipad 2 safari cannot download the file for windows live photo gallery

    on ipad 2 safari cannot download the file for windows live photo gallery

    What you can download via Safari on the iPad is very limited - you can only download apps from the iTunes app store on your computer to sync to the iPad, or from the App Store app directly on the iPad

Maybe you are looking for

  • Bridge CS6 bug: closing Bridge does NOT end process

    Bridge does NOT started at boot.  Windows 7 -64 (all current updates).  Photoshop CS6 13.0 extended Bridge 5.0.0 399x64 After closing Bridge by clicking on the Close X or file/exit, the process 'bridge.exe' does not terminate and therefore thereafter

  • Format links are greyed out

    I have set up links with success but when I try to format them I am having a problem. I select the link and on link inspector choose format. The options are greyed out. Help suggested opening the colour palate but no good. I am using blank pages with

  • Out of focus photos after burning dvd.

    I am using Magic iDVD in iDVD 08. Have created a movie with photos imported from iPhoto. All appears to be well when I preview the movie prior to burning it (i.e. photos are clear and sharp, and burning process appears to go as it should). But when I

  • In Bex Query day from calday value and sales in prev yr value not come

    Dear all right now i got output like                                                                             Sales                         Sales in Prev Yr      Sales Organization         Day From Calday          Calendar Day        Sales Value  

  • Oracle 9.2.0.3.0 olap_cmlite error on DBCA

    When I use DBCA to create a new datatbase on Oracle 9.2.0.3.0, I got this error: CREATE OR REPLACE VIEW olapsys.ALL$OLAP2_AW_CUBE_MEASURES AS ERROR at line 1: ORA-06550: line 2, column 13: PLS-00201: identifier 'SYS.ANYTYPE' must be declared ORA-0655