New iOS 7 not readable in bright light, why is there no contrast?

The new iOS 7 is terrible. The background screen is white and in certain apps, plus the phone dial pad and in Notes there is no color separation or contrast to read in bright light.

I just fixed this on my phone. If there is a moon symbol showing in the top right hand corner that means you have the "Do Not Disturb" setting on its a new feature with ios7. If you go to your settings you can find it right under the Control Center tab. Just click on it and flip the manual switch off. Hope this helps!:)

Similar Messages

When I insert my Dvd-R it says The disk you inserted was not readable by this computer.Why is this happening ???

When I insert my Dvd-R cd it saids "The disk you inserted was not readable by this computer." Please help
thanks

This is a blank disc? A disc you burned? Burned discs have a relatively high failure rate if you buy cheap DVDs. I bought some Dynex ones once and about one in every four fails.
Have you tried other DVDs to check if it is a drive issue?

My iPod went flat while installing new iOS now it wont even charge. Is there anything I can do????

My iPod went flat while iOS6 was being installed and now it shows a white screen when charging but wont take a charge. Is there anything I can do??????

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT5868 Why does the new iOS not trust linux computers?

I tried to connect the iphone 4s to my linux machine that normally works.
Since my last iOS upgrade the quesdtion comes up to TRUST the computer.
I press TRUST but it does not work. However it does work on my Mac computer.
Is it that the new OS only trusts Apple computers?

No, your Linux machine does not produce the proper response to the phone. Until someone on the Linux side reverse-engineers what AppleMobieDeviceSupport does when presented with that response, trust is not possible.
This is a security change in response to the fact that previously the iPhone would open itself up to any USB connection as soon as it was plugged in, and that connection could do whatever it liked, be it benign or malicious.

HT1476 The new IOS 7 doesnt support unofficial lighting cord charger

The reason y i dont use the the original lightning cord is because it broke and its very hard to get the official cord in my country. This is a real bad move for apple to do , my friend moved to android because of this issue. Apple needs to remove this unauthorized feature stuff

What is your technical support issue for us users? Your post is inappropriate for this forum.
Feedback goes here: http://www.apple.com/feedback/iphone.html

Why is there a color difference between my iPhone 4s and my new iPad?

I noticed that photos taken with my iPhone don't always display the same colors when displayed on my iPad.
What gives, they're both retina displays, right? Why not the same color balance?
Any easy fix or will periwinkle blue always look muddy, tending to magenta?

Oops!! And, I was also typing my answer 3 minutes behind you,
to boot.
When will I learn...
"Walt F. Schaefer" <[email protected]> wrote in
message
news:gbenmu$73k$[email protected]..
> Tim,
>
> Don't answer questions they don't ask. If you do they
will have no reason
> to come back and we'll have nothing to do.
>
> :-)
>
> --
>
> Walt
>
>
> "TC2112" <[email protected]> wrote in message
> news:gbenar$6m1$[email protected]..
>> Hello,
>>
>> It's because the browsers are using their default
margins for the UL as
>> you didn't set a value using CSS.
>>
>> You can change your navbar CSS to this, which sets
the margins to 0:
>>
>> #navcontainer ul
>> {
>> text-align: center;
>> padding: 5px 0px;
>> margin: 0;
>> background-color: #336699;
>> color: white;
>> width: 100%;
>> line-height: 18px;/* fixes Firefox 0.9.3 */
>> }
>>
>> Also, you'll notice the font-family is removed as
you already had it it
>> the body CSS.
>> The padding line means top and bottom padding is
5px, left and right is
>> 0px.
>>
>> Take care,
>> Tim
>>
>>
>>
>>
>> "Ruby7829" <[email protected]>
wrote in message
>> news:gbemcn$5m4$[email protected]..
>>> Why is there a large gap under my nav bar?
>>>
>>>
http://www.faceyourspaceorganizing.com/test_index.html
>>>
>>
>>
>
>

"Disk not readable...", Verify & Repair fail, Zero Out, HFS+ still fail

First, a time machine error came up saying the volume could not be found. Tried disk verify, disk repair (in disk utility) restarting, reconnecting, but to no avail. On restarting, computer says "Disk was not readable by this computer." I then Zeroed out all the data and reformatted the drive to Mac OS Extended (Journaled). TM worked for most of the day until tonight when another error message came up saying that the next backup failed because it required 168GB, but only 49GB was available. Yet I had done virtually nothing since the last backup the hour earlier. I clicked "Back up Now" to try and get it to maybe re-evaluate the situation and maybe do the backup, but instead, I get the error that I got before - "The volume could not be found" (or something to that effect). Upon restarting, I again get "The disk you inserted was not readable by this computer".
Is there something I am doing wrong? What can I do to fix this, or prevent this from happening later?

Alias7 wrote:
"Disk Utility stopped verifying "disk2s1" because the following error was encountered: Filesystem verify or repair failed" In the details box, it says:
"Verifying and Repair volume "disk2s1"
Invalid node structure
Invalid B-tree node size
Invalid node structure
Invalid B-tree node size
Volume check failed.
Error: Filesystem verify or repair failed."
This is what the error message was before, and is what it is now.
You had these sorts of errors, then zeroed-out the drive, now you have them again?
There's only one conclusion: your drive is failing. They don't always just crash and burn.
Note that the volume name should be "Time Machine", but Disk Utility sees it as "disk2s1" for some reason.
That's it's internal name to OSX. Use +System Profiler+ (Apple menu, +About this Mac,+ then +More Info.+
Look in the sidebar for FireWire or USB (whichever it is), select it, and you'll see disk2s1 listed as BSD name.
Time Machine Buddy seems to freeze most of my other widgets (can't type in calculator, can't delete Time Machine Buddy). It doesn't seem to do anything either, It just sits there saying "Backup Status" and "Messages" but no messages, just "....".
That's not normal, if you've had a successful backup recently, or one currently in progress.
An earlier post had a similar problem, because somehow he didn't have permission to read his own system log. From the Finder menubar, select Go, then +Go to folder,+ then type /var/log
That should list, among other things, system.log Double-click it. If nothing shows in the center portion, post back and we'll fix it.
But your main problem is an unreliable drive.

My computer is telling me i do not have permission to access the requested resource to update my iphone 5 to the new ios 7. why is it telling me this and how can i fix it, I have updated itunes and everything

my computer is telling me i do not have permission to access the requested resource to update my iphone 5 to the new ios 7. why is it telling me this and how can i fix it, I have updated itunes and everything

I saw this post at about 2:05 becasue I had the same problem. I just tried it again and now the update is downloading! just wait it out. I had to wait about 3.5 hours.

Why does the new iOS 7.1 not show all your calendar entry's like 7.0 only shows daily entry's not the list. New software on iPad still shows all calender entry's

New iOS 7.01 iPhone 5. When you go to check you calendar entry's it does not bring up all the entry's only shows entry's for each day. Why?

When in month view, swipe up or down to change the month, tap the litle icon "three lines horizontal" next to the search icon, and you have a list view of all events. Clicking the icon twice again, brings up the Day view, and then again tapping twice the list view again....
Personally I am not very happy with this "advanced" app, and I have installed Week calendar which basically is another interface to the same calendars database.

Why does my iPhone 4 not have the panorama feature with the new iOS 6 ?

Why does my iPhone 4 not have the panorama feature with the new iOS 6 ? Can someone please explain this to me. I was already excited about it.

That was made available in iOS 5. To update, you may need to connect to iTunes

Why iMessage is not working properly anymore since i've uploaded the new iOS 6 ??

Why iMessage is not working properly anymore since i've uploaded the new iOS 6 ??

I'm having the same problem. I have a 4th gen 32GB iPod Touch, and since upgrading to iOS6, iMessage has been nothing but buggy. It will work for an hour or so, and then randomly stop working as it won't send or receive messages. There's nothing wrong with my wifi, because that's the same as it was before. I really hope someone knows something to fox this problem. Some people use iMessage for good reasons - it needs to be a reliable messaging service like it was in iOS5.

My IPhone 5 installed the new IOS 7 update but it will not install. Why?

My IPhone 5 installed the new IOS 7 update but it will not install. Why?

I imagine a ton of people are attempting to download, install, and reactive their devices it right now. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.

Hi! I'm just having a little trouble when it comes to battery charging of my iPhone 5 with its new iOS 7! It doesn't indicates that the battery is fully charge unlike the old version of iOS! They said it should be pulsating but it's not

Hi! I'm just having a little trouble when it comes to battery charging of my iPhone 5 with its new iOS 7! It doesn't indicates that the battery is fully charge unlike the old version of iOS! I already read some reviews and discussion about this. They said that the lightning bolt should pulsate when charging but it's not!

Thanks for the replies. It took a while not hearing anything so thought I was alone. I have done many of the suggestions already. The key here is that it occurs on both phones with apps, and phones still packaged in a box.
A Genius Bar supervisor also checked his Verizon data usage log and found the same 6 hour incremental use. Suprisingly, he did not express much intrigue over that. Maybe he did, but did not show it.
I think the 6 hour incremental usage is the main issue here. I spoke with Verizon (again) and they confirmed that all they do is log exactly when the phone connected to the tower and used data. The time it records is when the usage started. I also found out that the time recorded is GMT.
What is using data, unsolicited, every 6 hours?
Why does it change?
Why does it only happen on the iPhone 5 series and not the 4?
Since no one from Apple seems to be chiming in on this, and I have not received the promised calls from Apple tech support that the Genius Bar staff said I was suppose to receive, it is starting to feel like something is being swept under the rug.
I woke up the other day with another thought ... What application would use such large amounts of data? Well ... music, video, sound and pictures of course. Well ... what would someone set automatically that is of any use to them? hmmm ... video, pictures, sound. Is the iPhone 5 succeptible to snooping? Can an app be buried in the IOS that automatically turns on video and sound recording, and send it somewhere ... every 6 hours? Chilling. I noted that the smallest data usage is during the night when nothing is going on, then it peaks during the day. The Genius Bar tech and I looked at each other when I drew this sine wave graph on the log print outs during an appointment ...

Disc Burner. Why are some files not readable or writeable?

Hello,
I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
"The operation cannot be completed because some data cannot be read or written.
(Error code - 36)"
Followed by the choices: "Stop" or "Continue".
I have a bad feeling that my startup disk is too small but I am not sure.
Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
Here are the specifications:
Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
Here is my process (I hope I am doing this right - I am new at this):
1. I first insert a blank DVD-R
2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
Why would some files not be readable or writeable?
4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
"Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
Am I doing this the right way?
Why are some files not "readable or writeable" as it indicates in the error message?
Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
Thanks

To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
Thanks Kappy

New IOS causing weird email issues. Also trying to figure out why mail taking so much room?

Two part question. :I have been trying to figure out what is causing the large amount of "other" in my Iphone memory which has essentially wiped out my 16gb 4s.
After a lot of hunting around, it looks like 6.2 gb is just in my email settings, which seems very high. I do save emails for awhile on the phone, but periodically clean it out and never have had this issue until quite recently. Usually I didn't even notice the "other" part of my memory when syncing.
Second issue--as part of my process, I downloaded the latest IOS (7.0.3) and after I did that, it shows I have 483 "flagged" emails in my mail folder.
I actually have 31. Any idea what could be causing this? Before I downloaded the new IOS, this # was always acccurate, but now this # is way off. Wondering if there could be any tie in to the memory issue?
Also, trying to figure out how to manage the email down to a # that won't take up so much of my memory. Again, it seems like just in the past month my "other" category started to grow, but my email usage and # I save hasn't changed drastically so not sure why it is growing so rapidly.
I have downloaded iexplorer, but can't figure out how to view any possible duplicate emails or issues there? Haven't tried a restore, if I restore will I lose all of the emails on the phone.
Any ideas?

As additional info, when I delete an item from flagged folder, it still shows 483 items aa flagged. Very strange.
Before I downloaded the new IOS, if I deleted a "flagged" item, it reduced the # accordingly.

New iOS 7 not readable in bright light, why is there no contrast?

Similar Messages

Maybe you are looking for