New IP address after 2 great years...
And new IP has me located outside of my hometown area and my speeds are a bit slower. I have the 35/35 pkg and I always tested at 43/37. I now test much closer to the pkg speed. Why the change and can I force a new IP?
Solved!
Go to Solution.
Correct about the different IP's and the routes. I kept changing the IP's, checking the approx. location, and I am pretty much back to the speed I was at with my original old IP, just a tad slower in the upload. By the way, my original IP started at 108 and I am now in 71. I had several others in between and the speeds were awful. I almost gave up trying. Thank you.
Similar Messages
-
Verifiy new email addresses?
How long does it take for Adobe to verify a new email address after the recipient has responded to the "has shared a file with you" message?
I've added a new email address, but test submissions from me are not coming in.Hi;
So you have one account on FormsCentral with "Email A" and wanted to get Notifications at "Email B", you added "Email B" to the Notifications which also adds the user as a Collaborator on the form.
Can you sign into FormsCentral using "Email B" and use the application? Does the "Notifications" tab have an "!" mark on it showing you that a user is not yet verified?
You can share your form with me and I can see what I see, share with [email protected] following these instructions (please include the subject or URL to this forum post for my reference): http://forums.adobe.com/docs/DOC-2462
Thanks,
Josh -
my ipod nano 4th generation, volume varies greatly when its connected to a jack lead, the lead has been changed still same, it dosnt do it when connected to earphones, it has just started doing this after 3 years, could it be a dirty or damaged connection into bottom of ipod? im at a loss please help if you can guys
Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD -
after changing broadband suppliers I have a new email address. I therefore had to change my apple id. It won't change on my iphone even after syncing. What should I do?
Follow this procedure:
1. Go to Settings > iTunes & App Stores > Apple ID.
2. Tap your Apple ID
3. Sign out
4. Sign in with your updated Apple ID. -
hi all, i've just switched to apple after many years using MS OS! I'm now using iMac desktop 21.5" with 2.9GHz processor and latest Yosemite software.
How do I transfer files from one USB memory stick to another USB memory stick on the iMac? cheers, linley94Plug in the memory stick and it should open then create a New Folder and drag and drop the contents from the memory stick to the new folder you created. Remove the original memory stick all the information should be in the new folder you created. Now plug in the new memory stick with nothing on it when it opens drag the folder with the contents from the original memory stick folder and all into the new memory stick that opened and there you have it.
CHEERS
DON -
I have change e-mail address after first registration and when I logged in it send new password to my old e-mail address. now I can't use my old profile.
and I can't install my old adobe X anymore
what to do?
MikaChange Account https://forums.adobe.com/thread/1465499 may help
-wrong email https://forums.adobe.com/thread/1446019 -
After GL Year opening the months of new year are not appearing in open period window of Gl?
Hi All,
After GL Year opening the months of new year are not appearing in open period window of Gl? Am i missing any thing???
regards
Shahzad M. SaleemHave you checked GL setups
Setup accounting manager >
Query your OU >
Under setup steps click on Update for ledger
Under accounting calendar
Number of future enterable periods. -
How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??
You might try contacting App Store Support: http://www.apple.com/support/mac/app-store/
-
Hello, I bought my iMac, a mid 2011 model in september 2011 & then got an AppleCare agreement after 2 years which extended my coverage to 2014. Now I have a question - Can I buy a new AppleCare agreement to increase the coverage till 2016? Thanks.
No.
(88631) -
I have just bought a new Mac Pro after my old one died after nearly 10 years. I have most of my music backed up on CDs, but when i load them into iTunes they are only identified as Track 1, 2, etc. Can I transfer from my iPod and how?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Change email address on printer to new address after moving.
HP Officejet Pro 8500A, Model #A910A Printer Product # CM756A
I have moved, have a new email address and I cannot find how to set my email address on the printer.
Using Mac OS Lion. Can print and scan and fax back to computer, but not send an email directly from the printer (with the scanned document attachment) I have gone into the set up countless times to try to change the outgoing email profile via HP Direct digital filing and the web site is constantly blank, goes nowhere., same for setting up HP digital fax. This is being done from the utility set up area in the web embedded server. This is the message I get:
You will be redirected to a secure (HTTPS-enabled) page.
If you encounter a message about an invalid security certificate, follow the instructions displayed to accept the certificate; you may be prompted to click Continue or OK (or a similar button or link). There is nothing here and is just a dead end.It sounds like you are getting the prompt to click OK to be redirected to the HTTPS site, but you are not getting anythign after clicking ok.
You could try refereshing the page until it loads (it may take several tries) or try using a different browser.
The secure section of the EWS is not a true site on the Internet and it has a certficate that isn't really registered since it is not accessible outside of your network. Browsers can have an issue with this sometimes.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
How can I set up a new iPad with my 5 year old daughters icloud address when the new iPad won't let me cause I've made her part of my family group?
If you want to migrate your phone to a new iCloud account, start by saving any photo stream photos you wish to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tap the photos, tap the share icon (box with upward pointing arrow), then tap Save to Camera Roll. If you are syncing notes with iCloud that you want to keep, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account, choose Keep on My iPhone and provide the password to turn off Find My iPhone. Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data.
-
I had itunes years ago but the email address associated with this is not longer in use. Is there anyway to updating and transferring all music and data to a new email address?
Hello Graceevelyn23,
Thanks for the question, and welcome to Apple Support Communities. You can update the primary email address that is used for your Apple ID:
Apple ID: Changing the email address you use for your Apple ID
http://support.apple.com/kb/HT5621
Thanks,
Matt M. -
WebLogic 6.0 looking for old IP address after DHCP assigned new IP
Hi All,
I installed WebLogic 6.0 on my desktop and it worked just fine
till the DHCP server assigned a new IP address to my desktop.
Now when I start the Example Server, I get the following.
"####<Mar 23, 2001 5:57:29 PM CST> <Notice> <WebLogicServer> <johnt1>
<examplesServer> <SSLListenThread> <system> <> <000202> <SSLListenThread
listening on port 7002>
####<Mar 23, 2001 5:59:56 PM CST> <Error> <ConnectionManager> <johnt1>
<examplesServer> <ExecuteThread-13> <> <> <000000> <Could not connect
to: '0S:10.97.20.69:[7001,-1,-1,-1,-1,-1,-1]'>
java.net.NoRouteToHostException: Operation timed out: no further
information
at java.net.PlainSocketImpl.socketConnect(Native Method)..."
Please note that 10.97.20.69 is my old IP address. I have a strong
feeling that this has something to do with cloudscape as the Default
Server starts up just fine. The server continues to run after
this exception is thrown and I can start the admin console.
Any thoughts ??
regards,
Tony.I don't think it's about cloudscape. The same thing happens to me, and I
don't use cloudscape, or have any references to it in my config file.
I usually find that shutting down and restarting Weblogic once or twice
clears it up.
Tony wrote:
Hi All,
I installed WebLogic 6.0 on my desktop and it worked just fine
till the DHCP server assigned a new IP address to my desktop.
Now when I start the Example Server, I get the following.
"####<Mar 23, 2001 5:57:29 PM CST> <Notice> <WebLogicServer> <johnt1>
<examplesServer> <SSLListenThread> <system> <> <000202> <SSLListenThread
listening on port 7002>
####<Mar 23, 2001 5:59:56 PM CST> <Error> <ConnectionManager> <johnt1>
<examplesServer> <ExecuteThread-13> <> <> <000000> <Could not connect
to: '0S:10.97.20.69:[7001,-1,-1,-1,-1,-1,-1]'>
java.net.NoRouteToHostException: Operation timed out: no further
information
at java.net.PlainSocketImpl.socketConnect(Native Method)..."
Please note that 10.97.20.69 is my old IP address. I have a strong
feeling that this has something to do with cloudscape as the Default
Server starts up just fine. The server continues to run after
this exception is thrown and I can start the admin console.
Any thoughts ??
regards,
Tony. -
My iPhone5 was locked at Telnor in Norway for 1 year. I send iphone to be repaired. Thei give me a new phone with other IMEI number without telling me. Ichanged to a new operator after 1 year. I asked the old operator to unlock my phone, but thei could not do that because i have a new iphone with new IMEI number. What must i do to get this fixed? Magne
Any replacement device is going to have a new IMEI. You need to contact whomever replaced your device (Apple or Authorized Apple Service Provider) and work through them and your carrier. You should have some paperwork from the replacement to show the carrier.
Maybe you are looking for
-
In Finder, you can right click a folder and open in new tab. Is there a way to open in new window?
-
Hi all. I am having this problem that I would require some input from everyone. I have dreamweaver 8 on my computer, as a test, I went to www.businessweek.com and tried to put the source under code of dreamweaver 8 to see the site, however, it only s
-
''locking this thread as the Owner of this thread answered in the related thread'' starting today when I clicked on firefox on my mac, there are blue stars constantly coming out of the firefox symbol and they are annoying and driving me crazy. How do
-
My lock button is not working,it doesn't click what should I do to fix this
My lock button is not clicking and it won't lock unless I push really hard and I really want to fix it how do I do that or do I have to buy a new one
-
Customer Defined Data Classes on Cluster Tables?
Hi all, I noticed that there is no option within db13 to change the storage option to a customer defined data class, for cluster tables. I am sure this is by design but wanted to check to see if anyone has had any luck defining a data class on a clus