New iPad 2 isn't producing any sounds?
Received replacement iPad 3 weeks ago and I haven't had problems until today. Sound is not functionally properly. Sound will not work without headphones. Mute is not on and volume is turned up. Any advice?
I don't fully understand what the System Reset does but I've found that it cures many ills. It's easy, quick and harmless:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162. Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
http://support.apple.com/manuals/#ipad
Finally, the User Guide can be downloaded at no charge via iBooks and a less comprehensive version of the Guide is included as a Safari bookmark.
Similar Messages
-
[SOLVED] MPD isn't making any sound while running as its own user
I can't make MPD produce any sound when it runs as its own user.
- I'm running MPD from systemctl
- If I run MPD as my own user I get sound
- I am not using pulseaudio
- mpv, for example, plays sound fine
- speaker-test -c 2 -D hw:1 plays sound fine
- journalctl -u mpd gives errors of the following type:
Jul 26 15:08:25 alexei-desktop mpd[5951]: alsa_output: Failed to open "My ALSA Device" [alsa]: Failed to open ALSA device "default": No such file or directory
Jul 26 15:08:25 alexei-desktop mpd[5951]: output: Failed to open audio output
Jul 26 15:08:25 alexei-desktop mpd[5951]: player: problems opening audio device while playing "deep_medi/releases_volume_one/01-Kalawanji.flac"
/etc/mpd.conf for sound outputs:
audio_output {
type "alsa"
name "My ALSA Device"
# device "plughw:1" # optional
# format "44100:16:2" # optional
# mixer_type "hardware" # optional
# mixer_device "default" # optional
# mixer_control "PCM" # optional
# mixer_index "0" # optional
My ~/.asoundrc looks like this:
pcm.!default {
type plug
slave.pcm "dmixer"
pcm.dmixer {
type dmix
ipc_key 1024
slave {
pcm "hw:0,0"
period_time 0
period_size 1024
buffer_size 4096
rate 44100
bindings {
0 0
1 1
ctl.dmixer {
type hw
card 0
> groups mpd
audio mpd
> aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Last edited by PlasmaSheep (2014-08-02 03:45:07)Sure, sounds good.
> aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CODEC [USB Audio CODEC], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
> lsmod | grep snd
snd_hda_codec_realtek 54803 1
snd_hda_codec_generic 56366 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 40396 1
snd_usb_audio 131860 2
snd_usbmidi_lib 21428 1 snd_usb_audio
snd_rawmidi 20278 1 snd_usbmidi_lib
snd_hda_intel 22831 2
snd_seq_device 5244 1 snd_rawmidi
snd_hda_controller 22911 1 snd_hda_intel
snd_hda_codec 104665 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 6652 2 snd_usb_audio,snd_hda_codec
snd_pcm 83207 6 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 19294 2 snd_pcm
snd 61276 18 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore 5551 2 snd,snd_hda_codec
usbcore 188381 7 snd_usb_audio,ohci_hcd,ohci_pci,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid
> cat /etc/modprobe.d/alsa-base.conf
options snd slots=snd_usbaudio,snd_hda_intel
options snd_hda_intel index=0
options snd_hda_usbaudio index=1
I'm not exactly sure what to put in ~/.asoundrc, however... -
I've just setup icloud on our new ipad but can't get any music to play on the ipad. It shows everything that is in our itunes but they won't play
Keep the Powerbutton and the Homebutton pressed at the same time until you see the Apple logo on your iPad screen.
-
My new IPad cannot start. No any response on any button. Not show charging.
Pls. can someone help about.
Thks.See Here...
How to Get Started
iPad User Guide iOS 5
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf -
Why my new ipAd Notification center does not play sound when receiving notifications.
1. Double-click the Home button and swipe Task Bar to the right
2. Check the volume and mute settings
http://i1224.photobucket.com/albums/ee374/Diavonex/6d3191ba.jpg -
On my new ipad 2, i cant download any app, each time i enter my App Id , it takes me where i have to enter 3 security info, then once finished it says " your session timed out, try again " !!!!
Call apple.This happened to me in August when i bought mine. They will reset the 3 passwords.
-
Can you take the SIM card from an IPad and transfer it to a NEW Ipad (not yet purchased) without any problems? Are there any complicated steps involved? This is for my boss.
Please let me know. Thanks in advance.Simple answer is YES.
The only caviat is for instance in the UK some iPads are locked to a specific network provider and therefore if the new iPad is locked then it will only work on the specific network it is locked to. -
My air won't produce any sound
My air won't produce any sound out of the internal speakers..
I have it set the speeker to be set onto internal and nothing is on mute, What should I do?
Btw it is the same with headphones in..Hello mroliverporter,
We've an article that can help get audio working on your Mac again.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/TS1574
Cheers,
Allen -
Apple TV3 and the New iPad - I WANT to stream the sound only
Hey guys!
I've got the new iPad and apple tv 3 which is great together!
I have a receiver (which is located in the living room) with Zone2 option and also have outdoor speakers which are connected to that Zone2.
When I sit outside i want to use my great speaker system and use the outdoor speakers using AirPlay and ATV and stream the content to my ATV but the thing is that when i do that I lose my video on the device and the tv shows my video feed.
That of course is a problem coz I enjoy my great speakers but can't watch the video (like YouTube video or something else)...
Is there a way to stream the sound only to the ATV?
I found discussions of people who don't manage to stream their video to the ATV and only managed to stream their sound but that was an error and things like firmware update solved their problem...
Found no discussions of people who TRY to stream only the sound, like I want to...
Does anyone have an idea that can solve my problem?
Thanks a lot in advance!!!
GolanIt's actually very easy and doesn't even require splitting the video stream and extracting the audio track from it (which is pretty easy if you have a desktop computer).
If you don't want to play back protected content (non-music videos purchased from iTunes Store), all you need to do is getting GoodPlayer, letting it play audio in background (Settings > Background Audio) and connect to your ATV in non-AirPlay mirroring mode. It'll happily play back the audio track of the video while you can do anything in the foreground. (Note that, in addition to GoodPlayer, other background audio-playback players may also work - it's just that I've tested GoodPlayer in this regard between my ATV3 and iPad 3. Let me know if you need more - for example, a list - info on them.) -
Audio Jack Isn't Outputing Any Sound.. What's a fix?
how can i fix this...
when i go to setting, i can flip the connection and make it an input rather than an output. it will pick up my iPhone through an aux cable, while playing music.. but it won't out put any sound when in output mode... i've hade this mac for little over a year.. this issue occord a few weeks ago.. im a dj, i need this to work,,, help me
<Email Edited By Host>I have and use a JVC CD Portable Boombox with the feature your looking for.
Model: JVC CD Portable System RD-HA 3
i am not sure if this model still be build, as there is a falow model?
I use an Airport Express and connected to these JVC CD Portable System RD-HA 3,
for receiving my music streaming from y iPad/iPod or computer.
when the playlist is ended, the JVC CD Portable System RD-HA 3 will automatical shut down after a few minutes. Or it will start also automatcal when there is again audio sound detected.
(This presset can be turn off via the remote control)
maybe you should ask one a JVC receiler what kind of other JVC audio product have this also build in? -
Isn't there any sound output on HP w2558hc??
I can't find out how to get any sound OUT (for headset) of my screen...is it just me beeing silly or isn't there plugin pls help
Your HP W2558hc LCD Monitor DOES have integrated speakers. To get external sound working, you do have to connect
the sound cable from the back of the monitor to the sound output port on the back
of the computer tower. The speaker wire should have a light green colored, male, single pole mini RCA
plug which you would match with a light green colored female sound jack on the back of the tower.
In order to get sound through your headphones, you should locate the jack on the front of the computer
with the headphone symbol beside it and plug the headphone into it.
"While I am an HP employee, I am not a expert on all our products.
If I offer advice, I'm not speaking for HP on how to solve an issue,
but I'll do my personal best to help you."
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem. -
my new ipad won't sync to my computer. doesn't show on itunes list. I have an iphone and ipod already synced
There is some wifi troubleshooting on this page which might, or might not, help : http://support.apple.com/kb/TS1398
-
I just got a new white iphone 4. When I try to take a video using the camera app, there is only a muffled sound. I never had this problem with my old iphone. I tried to restore it and that didn't help. I checked over all of the settings. Does anyone know how to fix this?? Thanks for any help you can offer!
There is a good possibility that your trimming of the SIM card could have damaged it some way. If the SIM was working in the old phone, then you cut it and the first new phone didn't work and now this phone doesn't work, it leads me to believe it has to do with the SIM card or the account. You are sure there is no problem with the account. Did you check with the provider when you got the iPhone 4 to make sure there was no problem with the account when you could not send or receive SMS? Why can't you just get a micro-sim? The iPhone should have come with one when you purchased it.The iPhone 4 is designed for a micro-sim. I don't believe this is a hardware problem unless the phone has been hacked or modified in some manner.
-
Brand new Iphone 4S will not make any sound unless head phones or dock is used.
I have tried multiple resets, checked all the settings and the slider switch on the side. I didn't notice there was no sound until I got home from the store with it.
Any ideas or do I just new to return it?Contact are designed to be synced to a supported app on the computer or a cloud service.
All media should be in iTunes on the computer the device is synced with.
Had you not synced the previous phone with iTunes prior to taking it to Apple? -
My back two speakers aren't producing any sound when using iTunes 7
I've only noticed this problem since upgrading, and it doesn't happen when I'm watching movies/listening to music with other programs, and I was wondering if anyone else has had this problem. I have a 5.1 setup, so two in the front, two in the back, and one in the center, plus a subwoofer. The back two speakers won't output any noise though.
I had the same problem. First thing I did was open Quicktime and switch the settings from 16 bit to 24 bit. I still only had sound coming out of 2 of 5.1 speakers and it sounded all distorted(this *****). Then after reading some posts here I turned up the volume all the way and sound came out of all of my speakers and was clear. I still haven't seen a real fix for the problem and I think it is unacceptable. In summary:
16 bit setting works at all sound levels but only plays through 2 speakers no matter what your other setting are.
24 bit setting sounds like static in all 5.1 speakers unless you turn the volume up all the way in itunes and then adjust your volume using your sound card volume control.
T
Maybe you are looking for
-
FireFox 5 was working fine. Got a message about one of my other programs had an update available. I installed the update and it needed to shutdown the system to take effect. I clicked OK. The system shut down and restarted and a Mozilla Crash Reporte
-
Xhtmlb: tabStrip - how to execut a page with flow logic
Hello all, how do I execute a "page with flow logic" from a "tabStrip". Currently I am using a "page fragment". But I need to change to a "page with flow logic" becuase of a technical issue. Is it possible to tell which tab was selected using even
-
Bt sport from I pad to tv through av adapter and HDMI
I purchased a 30-Pin Digital AV Adapter.Went onto my BT Sport App and can only pick up sound a no picture.went onto I Player and You Tube and it worked fine,is this a BT problem.
-
Including both the Jquery script to calculate the total of calculated column and freeze header row
Hi I managed to get this code from here, http://techtrainingnotes.blogspot.in/2013/03/freezing-title-row-of-sharepoint-2010.html done on the page I also managed to get this code from here, http://www.sharepointed.com/2012/11/28/jquery-total-calculat
-
Hi All, I have a Typical problem while logging in to Integration Builder Tool, I dont see any error log for IB ,but same time where as i am to login for other TOOLs IR&ID. The problem is when i am trying to login to IR it giving a shortcut menu of SA