New ipad out of the box will not boot up?

I have a new iPad2 new out of the box and will not boot up. It is fully charged and when I touch the sleep/wake botton a usb cable appears with an itunes icon in the center. Nothing happens when I touch the screen. Any thoughts?

Connect it to a computer with iTunes installed.

Similar Messages

My new ipad just out of the box will not power on. What's the deal?

I just purchased my new ipad2 a few hours ago. Right out of the box it will not power on. Tried to sync in case that would help but it didn't. I can't imagine what the problem would be. At the Apple store they said it should be charged and ready to go.

Thanks but it must be defective because that didn't work. Trying to sync it didn't work nor did trying to charge it. Guess it's another trip to the Applie store tomorrow.

Brand New iphone5 out of the box... speaker phone not working

Hi Guys, frustrated & disappointed very much.. brand new iphone5 out of the box, speaker seems to be not working, i checked the volume, silent mode is off.. still no sound from the speaker.. no ringtones, no music via speaker.. however, with headset, sound seems fine..
please help me out here...
Regards,
Anand

Auto-focus requires adequate lighting and a subject with adequate contrast. It may not focus in a very dark room, for example... or a night scene. It also needs contrast -- for exmaple if you point the camera up into a blue, cloudless sky it wont be able to focus on that either because there's nothing of contrast (the sky looks the same overall "blue" whether in focus or out of focus so moving the focus makes no difference and this confuses the camera.) If, however, you have good lighting (e.g. suppose you're outside on a bright sunny day) then the camera should focus on any normal subject then it should have no difficulty focusing (as long as it isn't a completely plain, featureless subject that offers no contrast.) The camera actually has TWO different focus systems. If you look through the veiwfinder then the camera uses it's "phase detect" auto-focus system (this is the fastest focus system.) If you put the camera into "live view" mode so that you use the rear LCD to compose your subject then the camera uses it's "contrast detect" auto-focus system. If neither system works with the lens in auto-focus mode then the most likely cause is a problem with the lens (either the camera is unable to communicate with the lens or the auto-focus motor isn't working, etc.) It's far more often that this is a lens problem and not a camera problem. If you happen to have another lens, try switching lenses to see if that makes a difference. Are the camera and lens both new?

G580 can't backup right out of the box. Not enough space

I recently aquired a G580 with the i5 processer, 500gb hard drive and Win8. I see the lenovo center is telling me to do a backup and since I just set it all up the way I wanted I figured it's a good idea anyway. I follow the instructions and it automatically makes a path to the D drive. I click backup and it say's there isn't enough space?
Seems my hard drive was partitioned from the factory with only a 25gb (24.9 to be exact) D drive. Now the only thing on the D drive is an applications folder with nortons and a driver folder with what looks to be backups of the OEM drivers. All this takes up 2gb of space. The backup is saying it needs 25.2 gb. So even without those files on the D drive I still wouldn't be able to make a backup.
I am reading the partitioning thread but I'm lost really. Plus I don't really want to be messing with partitions on a brand new machine out of the box. It seems I might have too though. Any input is appreciated. Thanks.

Hi,
Let me suggest a few things. I guess that will clarify few of the doubts.
1. The factory default image is saved on the OEM partition (hidden). This can be used through One Key recovery for loading factory defaults.
2. Refer to this link on creating a back up of factory default image. This can be used to get Windows back in case of hard drive failure or replacement. Applies to Ideapads also. Link
3. The option of creating Backup using the One Key Recovery software is for the current system image and not the factory default image. Hence the size will vary from user to user and I guess the D drive will not be sufficient for this. Anyhow, as you mentioned, creating the backup on external drive makes more sense.
Hope I was able to clarify few things.
Did someone help you today? Press the star on the left to thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an Accepted Solution

I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

Thank you for your suggestions. I downloaded a more recent version of Twain, but this didn't help. I also tried closing and opening Photo Shop and restarting my computer without success. Reinstalling Photo Shop sounds like a very promising solution, but I'm not sure I will do it. In the meantime I can scan items using a printer program. These scans open in Photo Shop. It is an extra step.

Have a MacBook Pro. the computer will not boot up, the screen has black and white stripes and multi color bands as well.

Have a MacBookPro. The computer will not boot up. the screen has black and white bands with multi color bands as well.

Yeah it's dead. Take it to an Apple Genius Bar and have it checked out. Then buy a new one.

The system will not boot

Hello, I am trying to install windovws after the restart can not install Yosemite because can`t please format the hard disk.Please help because just yesterday bought macbooc

FYI...the top partition is too full. You need free space. You will need to remove the bottom partition then make the top partition larger. Make sure you have 10% or more free space. If you use Parallels or VMware you don't have to partition your drive. If you use the vm software you can run Windows wihtout having to reboot into bootcamp each time you want to use it.
See this link for help after you resize your top partition.
https://www.apple.com/support/bootcamp/
I forgot to ask...
If the system will not boot, how are you seeing Disk Utility. Are you booted from the Recovery Drive? If yes, then you will need to erase the internal drive and reinstall Yosemite on the internal. When you erase, make it one partition. You can add a second partition later that's smaller.
Note: you posted in the OS X 7 Lion instead of the Yosemite forum. In the future, asking on the correct forum gets the best answers.
Parallels http://www.parallels.com/
VMware Fusion http://www.vmware.com/products/fusion/

When i install a 2nd 1gb stick of memory in my pavilion dv6000t laptop, the laptop will not boot.

HP Pavilion dv6000t running Windows Vista Ultimate 32-bit version. My system currently is running on a single 1GB stick of memory. I have a 2nd matching 1GB stick of memory. When I install the 2nd stick of memory the system will not boot. All the lights come on, the hard drive spins up, but you can not even get into the BIOS setup screen, it just sits there with a blank screen. What could be causing this. Thanks in advance for any assistance you may be able to provide.

Hi:
When I encounter issues like that, I switch the memory modules to see if one of the chips is bad.
So, I recommend you remove the one memory chip that is working, and put the other one in its place.
If the PC boots up, now install the second chip and see what happens.
If it doesn't boot up, then there is some undefined hardware issue.
If the PC doesn't boot up when you initially switch the memory with the one stick, then you know that the one memory module is bad.
Paul

Webcam and microsphone does not work on my new hp out of the box?

Just bought from Best Buy? HP - 17.3" Pavilion Laptop - 4GB Memory - 320GB Hard Drive - Pewter
When I turn on the webcam it says it is not enabled
when I connect through skyp, it is says mic is not enabled.
I verified them and they are enabled. This is just out of the box system.

Hi hk33,
Did you verify them in Device Manager?
Once you have verified that they are enabled in the Device Manager go to Skype setup.
Setup the HP webcam as the video source for Skype.
Setup your microphone and sound for the notebook and then exit the setup.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Malware on New Helix (out of the box) / Need Help Accessing Recovery Partition

Hi,
I'm working on a problem for my folks. My dad got my mom a brand spanking new Helix (not exactly a cheap laptop).
It came with two pieces of malware:
1. Windows 8
2. AstroMenda
Since I can't do anything about #1 and #2 is a serious PITA and the machine is new out of the box (really), I thought I'd just restore the machine from the recovery partition.
However, I cannot seem to get the machine to boot to recovery mode.
Enter doesn't seem to do anything (that is the only keystroke suggested by the splash screen).
F12 gets me a boot menu but I don't see any recovery options. Selecting the Windows Boot Manager or the Hard Drive itself results in Windows 8 booting.
F1 gets me the BIOS. Though I imagine I might be able to set the recovery partition (which #?) to the #1 boot option, I absolutely should not have to do that.
Shift doesn't do anything (suggested elsewhere on these forums).
F2 doesn't do anything.
F11 doesn't do anything.
Esc doesn't do anything.
My older lenovo T61p had the ThinkVantage. I always thought that was pretty goofy but now I'm wishing I had a ThinkVantage.
BTW, Lenovo Support was USELESS. They told me to return the machine and transferred me to returns but since my folks were on vacation when it arrived, we are outside the 30 day window, returns wouldn't do an exchange. They opened a case with Customer Advocacy (never heard of that) but told me I wouldn't hear anything for 3-5 business days and there is no number, website, or email you can call to check your "Customer Advocacy" claim. That sounds a lot like GFY.

Hello.
Open up the Charms Bar - Settings - Click the Power Icon - Hold either Shift button down and press Restart. This will open up the Advanced Startup menu.
Cheers!
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

Factory Recovery (Out of The Box Recovery) not working properly

I've got a Satellite L505D-G6000, 4 months out of warranty, go figure right, running windows 7 home pro. I've had an issue that I needed to get it back to "Out of the box" condition again. I ran the Recovery as laid out in the instructions "Press the "0" key while starting the computer" and get through the majority of the recovery, then it reboots and goes into System configuration. Now it hangs on the configuration part and if it's interupted it disables the "Admin" login and will not recognize any USB devices OR the built in buttons on the laptop.
Any suggestions?

Torloc,
When you say it disabled the Admin login, you mean that the administrative account in Windows is disabled? Have you tried doing the recovery a second time? Maybe it just had a problem the time.
doug5769 and mmack012000,
You both say you have the same problem. Can you be a little more specific? Are you using the same laptop model? Where exactly do you run into the problem when doing the recovery?
I'd just like to try to find out what exactly is happening.
If you can't solve your issue and no one in the community can help, you can try contacting support to speak with a tech support agent at (800) 457-7777.
- Peter

HT1600 I have Apple TV version 7.4.2 and we pressed on the remote the select button and the menu button at the same time to update our software. The box shows white light, we can get the screen to select netflix but nothing will move and the box will not

I have Apple TV version 7.4.2. We read in a blog that in order to reset our Apple TV we should press the menu button and the select big button at the same time which we did. Now when we attempt to turn on the apple tv box it with the remote we get a white light and sometimes we can get the menu screen but the remote will not let us move now will it allow us to turn the apple tv on or off. If we just leave it alone, the white light eventually goes away. I did unplug the apple tv and we removed the batteries and reinstalled them from the remote and that did not make any difference. Please advise.

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

Out of the Box. Not turning on

I have a brand new out of the box iPod Nano 6th generation. It syncs to my Macbook, but the screen has never turned on. Any suggestions?

If that is the case, I would go ahead and return it from the original place of purchase.
B-rock

HT1758 Power failure in the middle of a software update and not the computer will not boot up. The computer just has a white screen with a grey apple and just loads non stop.

My iMac will not boot up after a software update. the screen is all whute will show a grey apple in the middle and will look like it is working but nothing happens; this can go on forever.
Does anyone have any suggestions?

Do you have a backup in the form of a bootable clone or Time Machine? Restore that and then try the update again.
Some things to try here (Safe Boot)
http://support.apple.com/kb/TS2570
Another option might be to download the standalone from Apple Downloads on another Mac and try installing it in Firewire Target Disk Mode to the Mac that was interrupted during the update.
http://support.apple.com/kb/HT1661

Laptops screen wont light and the system will not boot most of the time.

my hp lptop g62 started not booting up and the monitor would not light up sometimess even though it would power up. as time passed it had that problem more frequently. now it wont boot at all and the monitor wont light up at all . it will still power up but thats as far as it will go. ive tried a recovery disk but it will not boot the machine either nor will the monitor light up . im a novice so any help will be appreciated.
This question was solved.
View Solution.

Hi
This may be a disply issue try to connect a external monitor to your notebook and see if you get the display there.
You can connect to an external monitor via a VGA or HDMI connection. The usual process to transfer the video output to an external source is to hold down the fn key and press f4. Use the arrow keys to select 'Projector Only' and hit enter.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02013758&cc=us&lc=en&dlc=en
and i also found a couple of links that may help you
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01884928
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443371
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

New ipad out of the box will not boot up?

Similar Messages

Maybe you are looking for