New IPad resets itself in mid-call using FaceTime???

Using my New IPad, 16gb, wi-fi  only this morning, doing FaceTime, in the middle of the call, the screen went blank, and the iPad appeared to completely reset itself; that is, the screen went completely blank and after a few seconds, the apple logo came on the screen, and then it proceeded to reboot to the lock screen. I tried reconnecting and this same thing happened multiple times. Sometimes within a minute of connecting the call, sometimes 5 minutes after connecting, it we in predictable.  Any ideas what to do?

Apologies, Diesel, I should have put in more details:
- when a new contact is created, only the facetime icon appears to the right - no phone or texting icon
- this just started happening, all previous contacts had tel, texting and sometimes facetime icon
- the app doesn't automatically format the phone number correctly when "done" is tapped (i.e. add brackets and hyphen if not typed in manually)
- the keyboard has actually lost it's round brackets!
This is my father's iPhone - I'm helping him out, and know more details may be needed.
thanks

Similar Messages

  • I have just bought the new iPad and I am keen to use FaceTime.please could someone tell me how to download my contacts on to the iPad.? Thanks

    I have just bought the new iPad and am keen to use face time. How can I automatically download my adress book from Gmail in to my contacts? I am very new with this. Thank you

    Using FaceTime
    http://support.apple.com/kb/ht4319
    Trouble-shooting FaceTime
    http://support.apple.com/kb/TS3367

  • Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad?  I would love to use my new ipad away from home but not sure how to use it?

    Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad?  I would love to use my new ipad away from home but not sure how to use it?  I am on Telus mobility with my iphone 4s.

    See the answer on the same question you asked a few minutes ago.

  • New IPad mini does not share photos using Photo stream

    New IPad mini does not share photos using Photo stream. Turned on sharing on both devices and also setup bluetooth both devices and they are connected. have photos on my mini put does not send to my Mac using photo stream
    Gary

    Photo stream doesn't use bluetooth; only wifi.  Photos added to the camera roll on your device are automatically added to photo stream when the camera app is closed, your device is connected to wifi, and it has at least 20 % battery life remaining.  Also, only photos added to the camera roll after enabling photo stream are uploaded, not photos prior to enabling photo stream.  If the photos appear in your my photo stream album on your iPad Mini, then they were successfully added to your photo stream.
    To share them with your Mac, your Mac must be running OS X Lion (10.7.4) or higher, and you must have either iPhoto 9.2 or higher or Aperture 9.2 or higher.  If you do, you must sign into your iCloud account in System Preferences>iCloud and check Photo Stream in order for the photos to automatically be added to iPhoto (or Aperture).  This is explained here: http://www.apple.com/icloud/setup/mac.html.

  • Why does my iPad reset itself all the time?

    Why does my iPad reset itself all the time?

    Hello!
    The same happened to my yesterday night when I was charging my iPhone 5 with iOS 6.1. My first impression was that could it be and auto update (to install iOS 6.1.2) however I'm still on 6.1.
    It erased ALL my info and shows the initial configuration wizard......this is totally a mega ***!!!!!!

  • Upgraded new iPad to iOS 5 after successfully using the machine for two weeks. The apps I downloaded are still here, checked for updates, all okay. However, when I try to use iBooks app or even USA Today, icon shakes, settles down then nothing. Help.

    Upgraded new iPad to iOS 5 after successfully using the machine for two weeks. The apps I downloaded are still here, checked for updates, all okay. However, when I try to use iBooks app or even USA Today, icon shakes, settles down then nothing else happens. Several tries, settings appear correct. Suggestions? Safari operates correctly, music icon matches (not from iTunes, simply music on my MacPro and iPod). Is Cloud the issue, perhaps? But everything worked before the upgrade. Using my home network. Hope this info suffices. Appreciate any guidance.

    Problem solved. Saw the solution in a more recent post. Downloaded a free app, then all my other apps started to work again.

  • HT204380 I have 2 iPads, and I would like to use FaceTime between this two iPads what should I do?

    I have 2 iPads, and I would like to use FaceTime between this two iPads what should I do?

    Yes use different email each iPad
    on "you can be reached for video calls at" in Facetime setting on General Setting
    If you have different apple id will be best

  • HT4534 my computer will allow me to call using facetime but won't accept calls

    My Computer will allow me to call using facetime but will not allow the same person to call me.  It says person is unavailable on their computer with nothing on mine

    I have a similar issue on my Macbook Pro, running Mountain Lion. Facetime works perfectly on my iPhone 4, and also works great between my iPad 2 and my phone. The problem is when I make a call to my Macbook from my iPad, there is no "accept" button, only an "end" button, and two grayed out icons for muting and enlarging.
    The only option it gives me is to end the call. There is no problem going out from my Macbook to my iPad, or to my phone, or from my phone to my Macbook. The problem only occurs when I call from my iPad to my Macbook. You may ask why I would want to do this, but I want to have a larger screen than on my phone, when I am away from my family, and would like them to call from the iPad.

  • Can i do a three way call using facetime?

    Can I do three way calling using facetime on my ipad??

    Hi Teach,
    Unfortunately conference calls are not an application that Facetime supports.  In my opinion, it would probably not work very well with personal Lan networks because it would require too much bandwidth, since streaming video does require quite a bit of it.  So for now, it has to be one on one.
    Wuz

  • Can't see person i called using facetime

    Can't see person I call using facetime.

    I assume this is due to the fact that system detects your internal monitor as default one, and that is there where system sends main data. In order to force system send data to the external monitor, get a mouse and physical keyboard, close MB lid, and then press any key on the external keyboard.
    when you get there, go to system preferences/display, and manually move the Apple upper bar to the external monitor, then choose mirror; ultimately, set optimal resolution.

  • TS3274 Hi, have just got new iPad 3 and am having difficulty receiving FaceTime calls from husbands iPhone 4s. IPad wasn't ringing at all and the iPhone would get a message saying iPad was unavailable for FaceTime yet we were using same Internet connectio

    Hi,
    Just got the iPad 3 which is our first and we were messing around with FaceTime between this and our iPhone 4s. The problem was we can FaceTime the mobile but we kept getting a message flag that the iPad wasn't available.
    After much deliberation and googling we have managed to get the iPad to at least ring when we FaceTime it from the iPhone but the new problem is it rings for half a second giving no one a chane to answer.
    Can anyone suggest anything else?
    So far we have checked in setting that all sounds are enabled, put slide switch to mute then flicked the mute button up and down on the side of the iPad above the volume and also changed the DNS numbers on both mobile devices to ensure they sync but I am still having the same problem.
    All answers greatly appreciated

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • How do I sync a new iPad that I've already started using, and don't want to lose the data?

    I have a new-ish iPad that I have started using without syncing to iTunes.
    I now need to sync iBooks, if that is possible, with my iPhone. I gather that the best way to do this is to link the iPad and iPhone up with iTunes.
    When I plug the iPad into my iMac, it appears as though it will delete all the existing content on my iPad as it thinks it is a brand new, unused iPad. I don't want this.
    How do I connect the iPad to iTunes for the first time, without it erasing what I already have on it?

    Sadly, none of this works.
    I have backed up using PhoneView and iCloud. When I plug the iPad in, I can't access anything other than a binary option that says 'set up as a new iPad' or restore from a previous back-up. Sadly, none of the iCloud back-ups that I have done from my iPad appear in the list.
    Looking at the list provided above, I can only do steps 1-3.
    4. Store>Authorize this computer.
    - This doesn't work. A pop-up appears saying that I have already authorised 4 devices. It won't let me do anything else with this.
    5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your iTunes library).
    - Greyed out - can't do this.
    - None of the things below therefore work either.
    6. Right click your phone in the left device pane & select "Reset warnings".
    7. Right click again and select "Backup".
    8. Right click again & select "Restore from Backup", select the backup you just made. When prompted to create another backup, decline.
    9. This MUST be followed by a sync to restore your iTunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select "Merge".

  • Charge new ipad on macbook pro (mid 2010)

    I have a Macbook Pro MID 2010. When I connect my new ipad using MAC OS X Lion it charges normally, but when I connect it on my Windows 7, it doesn’t.
    does any of you guys know how to make it work?

    Newer mac books have USB ports that provide sufficient wattage to charge an iPad.  Very few windows laptops have high powered USB ports so they can only trickle charge an iPad when they can easily charge an iPhone. 
    It is because the iPad, as has been mentioned, needs to pull 10 watts through the charging system to do a normal charge.  This is why the iPad comes with a dedicated 10 wall charger and not the standard 2.5 watt wall charger that comes with the iPhone and iPod.
    If you need to buy an extra wall charger for your iPad for when you are on the road or to keep at work make sure it is truly iPad compatible.  I found a really nice two port charger that provides high (10 watts) capacity on one port and low (2.5 watts) on the other.  So I can charge both my iPhone and iPad at the same time without damaging my devices or the charger.

  • IPhone resets itself when not in use

    I have an original iPhone which has been updated to 3.0. Since the update I've noticed that the phone will spontaneously restart itself when not in use. When this happens I'll notice the screen light up with the silver Apple logo and then go blank. This will happen repeatedly. While this is going on I can't use the phone until I plug it into the computer. Once iTunes does it's thing the phone will return to normal for a while - sometimes a day or two - before repeating this behavior. I have reset and restored the phone but without solving the problem. Apart from this everything seems to be working properly.
    Any ideas?

    Have you tried restoring and setting up as a new phone (i.e., not restoring from a backup)? Sometimes those backups bring along whatever is messing up your phone.

  • IPAD resetting itself and will not activate after restore

    Hi
    I got an iPAD 3G+WIFI just over a month ago and everything was working fine. all of a sudden it just started resetting itself. I got a message on screen saying I should restore the iPAD and a strange error saying "iPhone cannot call" (or something like that) so I connected to iTunes, backup, and restored. The problem is that after restore the iPAD won't activate and iTunes puts up an error saying "We're sorry, iPAD is damaged. Please take to the closest Apple store". (I tried all sorts of forced restart and restore that I found in various forums but it just won't activate)
    Now...the additional problem... I got this as a gift from the US, but I live in Malta (Europe) and the closest Apple store is basically in another country!! The local Apple agent isn't licensed for servicing iPADs yet.
    1. Can this be solved via software?
    2. Is it possible to ship back via post?
    Thanks

    I sounds like a hardware problem to me. I suspect you can send it back but first your typically need and RMA number which you get from Apple. Have you asked the locale store of how to send it back? Since it seem that it is within the 90 day free telephone support period you should be able to call Apple in the USA for shipping instruction. Go to the USA Apple site to find contact information.

Maybe you are looking for

  • Release procedure problem and error

    Dear Friends , I facing some major problems in release procedure , i had configured one release procedure in 4levels , due to some reason i had deleted 3release groups and codes due to it was not working . But after deleteing  in purchase order it sh

  • How to pass a JavaBean from servlet to JSP?

    Hi there, I am working on a project that needs to handle quite a few client requests and I want to use the Front Controller pattern that is described in the J2EE pattern page. The steps described in the front controller pattern is that: 1. A servlet

  • How to use case when in Select qry?

    Hi Friends, I want to use Case when in Select qry, my situation is like this SELECT bmatnr blgort bj_3asiz bmat_kdauf b~mat_kdpos        SUM( ( case when bshkzg = 'S' then bmenge else 0 END ) -         ( case when bshkzg = 'H' then bmenge else 0 END

  • SAPbouicom value change

    Hi Experts, I would like to know how to find out the sapbouicom (GUI) value changes for a field in SAP B1. E.g. project field in the doc header --> tab accounting and order number in the document header --> tab accounting. - in old version (2007 belo

  • Networking an external drive through TC ethernet connection.

    I hope someone can help with this. I have a 1TB Time Capsule which is almost full. I got a Seagate free agent dockstar drive (1TB). The plan was to link it to the TC via the 1GB ethernet connection and move my iTunes library to it (freeing up a ton o