New iPad won't send out emails on VerizonLTE or 3G network, but will do so on wi-fi - help?

Been through the wringer on this one. Verizon or local cable co. have not helped. New iPad will not send out emails while in LTE or 3g, but will do so in wi-fi. Have checked settings, restarted, reset settings, etc. Any ideas would be appreciated. BTW, I have an iPhone with Verizon and it sends out emails with exactly the same settings as the iPad while on 3g. This has been nuts.

Hi all:
Just found the answer to this thanks to Chris CA. In outgoing email settings, for some reason, the new iPad must have username and password entered even though it says optional. Once I entered that data, emails sent right out! The Verizon techs or my cable co. techs never suggested doing so after many hours of troubleshooting. This forum always has the real "experts". Thanks again, Chris.

Similar Messages

New iPad won't send emails

I have a new ipad and it will not send email. I get a message "Cannot Send Mail. A copy has been placed in you Outbox. The recipient ****@*****.com was rejected by the server because it does not allow relaying" Is there a way to fix this? We have problems similiar to this with a pc and we changed the port setting. This ipad is set to port 110 and when you change it to something else I get another error message saying that the email account setting are wrong, Anyone know what I'm doing wrong?

TCP port 110 is used to receive e-mail using POP.
The error message you saw was when you tried to send e-mail.
I assume (because you didn't supply technical details) that you send e-mail using SMTP via TCP port 25.
If you try to send e-mail via an ISP that doesn't know you, they will in almost all instances reject your request.

HT1430 Hi my ipad won't send an email but recieves them

Hi my ipad not sending emails but receiving them? Help

See Here > http://support.apple.com/kb/TS3899
From Here > http://www.apple.com/support/ipad/mail/

TS3276 I cannot get my outgoing SMTP server togo "On-Line" and cannot send out emails.

I cannot get my outgoing SMTP server togo "On-Line" and cannot send out emails.

I had this problem too but I fixed it today.
Go to the mail menu preferences.
Click on account in question.
Select the outgoing SMTP mail server (the one offline), this has a drop down list, click on the edit server list.
Click on the advanced button.
Make sure use default port is checked.
Make sure SSL is unchecked (unless your provider requires it, mine does not work with it checked).
Have authentication set to password.
User name should be your email address for that account.
Make sure correct password is entered (for some strange reason my password box was blank on this account).
Push the ok button.
For me the SSL box was checked and the password was missing. This is strange to me considering I have unchecked the SSL Box on the mail preference advance page. Also, I went through the complete set up account when I first created the account, why was my outgoing server password box empty?
I hope this helps.
Here is a link to some visual aids with the steps from my ISP
http://support.knology.net/content/smtpauth/smtpredirect.cfm

I have a brand new iPad newest version. Wifi. The messaging won't send out but I receive messages from others. What is wrong?

I have the newest version of the iPad (3rd generation) with wifi. The messaging won't send out but I'm receiving messages from others when I'm using it. They also come through on my iphone at the same time. But I can't send them out on the iPad. I tried someone's suggestion of changing the DNS to 8.8.8.8 and that did not work to fix it. What is wrong with this thing? Thank you in advance for your help.

Are you trying to send a message to a cell number or an email address? iPad does MMS, not SMS, meaning it can't send a message to a number. It can send a message to an email address........

I have a new email and am trying to change it in icloud. but it has locked me out and won't send my email a reset password link for some reason. even though it says its sent, it doesnt come to the email address

i have a new email so have a new apple ID now and am trying to change it in icloud. but it has locked me out and won't send my email a reset password link for some reason. even though it says its sent, it doesnt come to the email address. help!

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18

I have what I think is the original Ipad, and it will no longer send out emails. Is it possible to update it, or am I just stuck with a $500 electronic device that will no longer work the way I need it to. Some of the original apps will no longer work

I have what I think is the original Ipad, and suddenly it will no longer send out emails and some of the apps that worked prior to the newer Ipads coming out will no longer work. Can this be updated, or am I stuck with an expensive electronic device that will no longer serve my needs?

Did you already update to the latest iOS; http://support.apple.com/kb/HT4623

I have an Ipad 2 and are having problems sending out emails in one of my email address. I always get a message reading the email was not sent because the server does not allow relaying. This is an email account POP3. I have no such problem with gmail.

I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
Richard.

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

IPad won't send emails but iPhone does. iPad message says server does not recognise email address resetting account makes no difference what else can I try?,

My iPad won't send emails despite identical settings with iPhone which does work. " server does not recognise email address" resetting account fails to solve issue. What else can I try?

Have you checked ALL the settings including the port assignments? Easiest way to get those back to is to delete the email account from the iPad then redo the email account. Usually the ISP providing the email account will have instructions on their web site.

Problem sending out emails offsite. iPad

Hi fellow apple users,
Could anyone assist?
I have no problem sending out email when using it at office.
But when I go offsite to send out email, i was prompted 'Cannot Send Mail'. A copy has been placed in your outbox. The recipient was rejected by server because it does not allow relaying.
Any good souls out there who can assist?
Thanks a bunch!

Hi al,
Here is a link to a site that explains the whole "relaying" thing. Because there are various reasons you may be getting this message, thought this might be helpful:
http://www.gammadyne.com/relaying_denied.htm
Hope this sheds some light on your issue!
GB

ActiveSync Result: Not enough space on server. How can I help resolve this problem? Won't let me send out emails.

I can't seem to send out emails because I keep getting an error when it's trying to Sync by reading" There is not enough space on the server to sychronize info. Deletoe some old items from your exchange mailbox"
I dont have any messages in my folders, and I'm trying to send an email. How come this isn't working? Any way to help solve it would be greatly appreciated, thanks!
Post relates to: Treo 800w (Sprint)

Do you have any items in the delete items? If not check with your IT and see if any changes to the server was made or what could be causing this problem.
Post relates to: Palm Z22

SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.

Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered

I have just had a replacement IPad as the camera stopped working. Now the new iPad won't recognise my aol e mail for face time as well as my apple id. I have tried adding as a second e mail, but it says already in use

I have just had a replacement iPad as the camera stopped working.
Now the new iPad won't receive FaceTime calls at my aol.com email.
If I try to add it as a FaceTime address it just says email address already in use.
I guess it is still linked to the old iPad in some way
Any suggestions? The old I pad is wiped and back in the store

This Apple article should be able to help ya out -> iOS: FaceTime is 'Unable to verify email because it is in use'

I am unable to send out emails but am able to receive emails. Plz advise. Thankyou

Why am I unable to send out emails successfully but am able to receive emails. The company I am with is Hawaiian Legacy Hardwoods.
This window keeps popping up:
Sending of password did not succeed. Mail server pop.secureserver.net responded: hawaiianlegacyhardwoods.com not found in the auth database
When I close the above window another window appears:
Login to server pop.secureserver.net failed.
These options then appear:
Login Failed
Retry Enter new Password Cancel
Not sure why this is occurring but is there any direction you can assist with?
Thank you

Is this problem in Thunderbird (stand-alone email software)? Just checking because your post got tagged "Firefox" somewhere during the submission process.
secureserver.net is a GoDaddy server. Are you sure your mail account is hosted with GoDaddy?
Also, server names starting with pop. usually are for incoming mail. You may want to double-check your provider instructions to see whether you need to use a server name starting with smtp (or something else other than pop).
In Thunderbird, there may be a separate Outgoing Mail entry at the bottom left of the Accounting Settings dialog. To access that dialog, you can use either:
* 3-bar button > Options menu > Account Settings
* tap the Alt key > Tools menu > Account Settings

Contact form won't send to email

I've done this contact form loads of times and it works fine but for some reason this particular form won't send to email. The php is good so it must be my form. I'll put both bits of code up anyway. Thanks
PHP:
<?php
if ($_POST){
if (!filter_input(INPUT_POST, 'email', FILTER_VALIDATE_EMAIL)){
$message="Please provide a correct email address";} else {
$name = strip_tags($_POST['name']);
$company_name = strip_tags($_POST['company_name']);
$telephone = strip_tags($_POST['telephone']);
$email = $_POST['email'];
$comments = strip_tags($_POST['comments']);
$to = '[email protected]';
$subject = 'Contact form submitted.';
$body = $name. "\n". $company_name. "\n". $telephone. "\n". $email. "\n" .$comments;
$headers = 'From: ' .$email;
if (mail($to, $subject, $body, $headers)) {
echo 'Thanks for contacting us. We\'ll be in touch soon!';
} else {
$message = 'Sorry an error occurred. Please try again later.';
?>
<?php echo "<p style='color:red'>$message</p>"; ?>
HTML:
<form id="contactform" action="" method="post">
<p>Name:<br/><input name="name" type="text" required /></p>
<p>Company Name: <br/><input name="company_name" type="text" required/></p>
<p>Telephone: <br/><input name="telephone" type="tel" required/></p>
<p>Email: <br/><input name="email" type="email" required/></p>
<p>Comments: <br/><textarea name="comments" required/> </textarea></p>
<input type="submit" name="submit" value="Send!" formmethod="post"/>
</form>

PEAR is a library of useful functions that is often included in a PHP installation.
BUT. . .PHP only uses the mail capabilities of the server. If the server doesn't allow it, then you may not able to send email no matter what. . .however, I am not absolutely sure of that. I have never had to work with a server that did not support mail.
SMTP is a protocol that uses an email account to send mail. You may be able to tie your mail to an external SMTP account, for instance even a GMAIL account. PHPMailer is an add-on that you can use to do this. You can install it on your website. It isn't hard to use, but it is more involved than simply using PHP mail().
But really, have a conversation with the server admin about all of this. Find out why PHP mail isn't installed, and if he is willing to install it.

New iPad won't send out emails on VerizonLTE or 3G network, but will do so on wi-fi - help?

Similar Messages

Maybe you are looking for