New iPad2 will not connect to wi-fi

Cannot connect to home wi-fi to finish setup of my iPad2.  I keep getting the message "wrong password." Yet I enter the correct password

Will it connect if WEP/WPA is disabled?
If it does, you may have to switch from WEP to WPA or vise versa.
If that doesn't work, you may have to update the firmware of your router.

Similar Messages

  • New ipad2 will not connect to itunes

    I just purchased an ipad2.  I'm attempting to connect it to my itunes account.  I have an ipad which has connected to the account on the same computer with no problems.  I just updated iTunes to the latest 10.3 version.

    After 2+ hours on phone with an Apple tech, he decided I have an iPad problem. Will return to Verizon today.  Not a good intro to the 2.  Love the original iPad, though, so will stay on it.

  • My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

    Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem.  Windstream tech service is useless.  i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help!  windstream said everything is working on their end, yea right.  What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products. 
    these are brand new machines with lion.
    This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great.  Please help before my wife losses it
    thanks

    There is a 2701HG-B, and a 2701HG-D.  If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
    By the way tell your wife it isn't that bad.  At least you have an ethernet DSL modem.  There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access.  At least now only the craziest DSL providers still use those modems.

  • HT2292 I recently got a new ipod touch and the new one will not connect to itunes.  I've done all the troubleshooting and now I'm just plain frustrated.  With the new update my old ipod froze and best buy gave me a new one. What to do?

    My ipod recenly froze with the last update.  bestbuy gave me a replacement.  the new one will not connect to the computer or itunes.  i followed all the instructions and - nothing.  It's frustrating enough as i lost all my notes and work, but now I can't connect to sync with itunes.  i don't get it.  i'm not a supertech so i don't know what to do. help!!!!!!

    Thanks, Bob!  You are correct.  And, we learned this as we spoke with APPLE TECH SUPPORT by phone on Christmas day (800-APL-CARE).  One of their reps spent the time to help us troubleshoot this, but the boiled down conclusion is your answer, and to repeat for the benefit of others, here is what worked:
    1. With our Belkin router set to "out-of-the-box" WEP 64 bit security, we could not get wireless access of any kind.  Only with the Security Mode set to DISABLED, could we gain access.
    2. Changing the router's security mode setting to "WPA/WPA-2...." and entering a new min. 8 char passphrase, and then entering that same passphrase into the IPOD Touch, and restarting the router, did the trick!
    Based on this, and some info found in another posting, I can only conclude that the IPODs and IPHONES do not support WEP security mode in many generic routers used by thousands of consumers.  Hopefully, those same consumers can figure out how to change their wireless router setttings to WPA/WPA-2 security mode and ALSO get all their other wireless devices (PCs, laptops, WII boxes, ROKU boxes) all reconfigured to WPA mode, too.
    I THINK THE BOTTOM LINE HERE IS THAT THERE IS AN ISSUE THAT APPLE NEEDS TO ADDRESS WITH WEP COMPATIBILITY and it may also be the case that MOST CONSUMERS ARE USING WEP 64 BIT security on their home wireless routers?
    In any case, it's working now, so anyone who is having problems should try changing to WPA mode and post back here if it worked for them!

  • TS1702 My brand new iphone5 will not connect to my home wifi even though my ipad and old iphone do connect with no problem. What can I do?

    My brand new iphone5 will not connect to my home wifi even though it recognizes it. My ipad and my old iphone4s connect with no problem. Any thoughts?

    Although your other devices connect okay, it would be worth resetting your router by switching if off for disconnecting it from mains power for 2 minutes and then switch it on again.
    Good luck and do report back.

  • My IPad2 will not connect to the internet, "Safari could not open the page because the server stopped responding."  My AirPort utility shows that I am connected.  What could be the problem?

    My iPad2 will not connect to the internet, "Safari could not open the page because the server stopped responding".  I've run the AirPort utility and it shows that I'm connected to my Wi-Fi.  The connection works with both my iMac and iPhone.  I'm concerned that the problem is with hardware rather than software.

    Try the following:
    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings
    3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

  • HT1695 my ipad2 will not connect to the internet, it says that it "unable to join"...but my laptop is connected to the internet.... i don't understand why all of a sudden it stopped connecting it dosent make sense

    my ipad2 will not connect to the internet, it says that it "unable to join"...but my laptop is connected to the internet.... i don't understand why all of a sudden it stopped connecting it dosent make sense.

    hmm, well I would say that raises the possibility of an issue with your ipad, and lessens one with your router.
    What version iOS are you using? Update
    Then Its time to try a restore.
    How to update your iOS device
    http://support.apple.com/kb/HT4623
    How to back up and restore (iCloud and iTunes)
    http://support.apple.com/kb/HT1766

  • My new 5S will not connect to my home Wi fi can any one help?

    My new 5S will not connect to my Wi fi- from EE. I have entered settings manually and tied every thing short of throwing the phone at the wall! The 4s was no problem.

    settings - general - reset - reset network settings.
    power cycle your router, unplug it from the wall outlet, wait a minutes and then power back up.

  • HT5569 My new Iphone will not connect to my home wi-fi, unless I am standing beside the router. Why is this and how do I fix it? I have previously connected it to another hub before trying to connect to my home wi-fi. Would this of had an effect?

    My new Iphone will not connect to my home wi-fi, unless I am standing beside the router. Why is this and how do I fix it? I have previously connected it to another hub before trying to connect to my home wi-fi. Would this of had an effect?

    If you have connected to other wi-fi successfully, then your wi-fi should be working. Try power cycling the router. Disconnect it from power for about 30 seconds and then restart it. After it has come back, try connecting again.

  • Brand New C309g will not connect wirelessly with ANY wireless security options enabled

    Printer will connect via wired ethernet. I can use the http utility.
    Printer will connect via unsecured wireless connection.
    Printer defaults to autoconfig (169.xxx)when connected  via WEP (both open and shared), will not connect with a manual IP address. Cannot access http utility.
    Printer won't even autoconfig when connected via WPA-Personal - instead says "No connection found."
    Printer is in the same uncluttered room as the router.
    ALL OTHER wireless network devices work fine and keep up with security changes.
    I have legacy devices on the network that make me want to run with WEP.
    I've run the HP Network Diagnostic. It can access my router just fine. It cannot find the printer.
    Router is D-Link DIR-655.
    I jump through the right hoops - refresh router, restore factory defaults on printer, etc. All other wireless network devices work fine.
    I want to pull an "Office Space" on this brand-new printer - please save me from doing so!
    -mooi
    This question was solved.
    View Solution.

    Ooops, my mistake.  Thanks for pointing it out.
    Another idea is to make sure the firmware is updated on the router.
    Also, from the control panel of the printer: Setup > Network > Wireless Network Test.  It will self-test the printer radio.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My ipod shuffle is brand new and will not connect to itunes

    my ipod shuffle will not connect to itunes and it is brand new and i have used other ipods on this computer.

    When you take this one back, be sure to have your USB docking cable checked, to make sure it is not  the thing that is defective.
    Also, make sure you have USB cable plug completely inserted into the headphones jack.  The fit is sometimes tighter than expected, especially when the shuffle is new.  This is apparently enough of an" issue" that Apple has a tech support doc about it
    http://support.apple.com/kb/ts3572

  • My ipad2 will not connect to network since last iOs update.

    My iPad 2 will not connect to network since last iOs5 update.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • 80 GiG Brand New iPod Will Not Connect- Wants Drivers

    I run Windows Vista. My new 80 GiG iPod will not connect, saying it needs drivers. I guess I'm ignorant, but I'm stumped. The drivers are supposed to be in the latest download of iTunes, but they never are found. I have reset, re-installed my iPod and iTunes until I'm blue in the face. The forums offer no real help except to refer to several articles by Apple that don't give me a clue.
    Help Please.
    Wm. J. McGowan, II

    I run Windows Vista. My new 80 GiG iPod will not connect, saying it needs drivers.
    iPods use the standard Windows USB mass storage drivers.
    perhaps try the technique from the following post:
    http://discussions.apple.com/thread.jspa?threadID=892874&tstart=15

  • IPad2 will not connect to wifi unless it is in the same room

    I live in the UK.
    Yesterday I bought a new ipad2.
    It will only connect to my wifi when it is in the same room.
    When it is less than 2 metres form the router, it drops one bar, and when I go out of the room it drops connection completely.
    I have an iphone and that connects to wifi from anywhere in the house.
    I connect to wifi via BT and a BT router.
    Please does anyone have amy suggestions to help?
    Thank you.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • New iPhone will not connect to iTunes Store. Not able to activate

    I bought my iPhone 3 weeks ago from an AT&T store and use it everyday. It works fine. I bought one for my wife 2 days ago from the same AT&T store and it does not work. After spending 2 + hours on the phone with Apple level 1 and 2 support, the final diagnosis is a bad sim card. (Apple phone support was very good and very professional) They are in process of sending me a box to mail the iPhone in for service and I am confidant they will fix the problem. I am disappointed, however, the iPhone did not work out of the box and I now have to wait for service on a brand new iPhone.
    Has anyone experienced the following problem?
    When connected to iTunes, the iPhone is not able to connect to the iTunes store and I receive the following error message, "We could not complete your iTunes request. The network connection timed out. Make sure your network settings are correct and your network connection is active." I was not able to activate it.
    The iPhone screen itself shows the iTunes logo and the sync connector. iTunes does not give me the ability to activate the phone nor make any changes to it. iPhone shows up in the device listing, but that is it. There are no settings in iTunes for making changes or setting up the new phone.
    When I plug my iPhone into the computer, everything works fine. The new iPhone does not. I tried everything Apple recommended including: Resetting the phone and deleting / reinstalling iTunes, but nothing worked. So, here I am waiting for service on a brand new iPhone that I have paid for and am paying for monthly service, but cannot use. Kind of stinks...
    Anyone have a similar problem?

    2 things
    one they will overnight you the box and give you a overnight box to send to them (fedex)
    two call them back they will also overnight you a free iPhone loaner for the next few days if you ask

Maybe you are looking for

  • Absoulte url for a image

    Hello, I have a page that is an include file for another page in a different folder. I put an image in the include file and contribute loaded the image where I wanted, but on the page that includes this file is looking for the image in the wrong loca

  • Download dreamweaver

    How do I install Adobe Creative Suite 5.5 web premium onto my laptop without the disc?  I have the activation code.

  • Problem when connection to TOAD

    Hi, Oracle Version :10.2.0.4 Operating System : Windows-7(64-bit) Toad Version : 9.5.0.31(32-bit) Hi i installed oracle 64-bit on windows 7 64 bit and when i tried to connect to the database through toad i am getting the error as show below and file

  • PLZ HELP SAP SCRIPT ISSUE (DYNAMIC BOX)

    Hi all I want to include a dynamic text (means number of lines can vary) inside a box . please guide me how i can create this box whose size would be dynamic according to this text. plz help i am not able to find ne solution Thanx in advance Edited b

  • Aperture 2 and Nikon D7000

    Uploading NEF files from my new Nikon D7000 to Aperture 2 gives me an "Unsupported Image Format" error message. JPGs are fine. I do not see any software updates from Apple to resolve this problem. I'm hoping that I don't need to upgrade to Aperture 3