New iPhone 5 just started being unable to place/receive calls

My iPhone 5 just started being unable to place (says call failed) or receive calls. Cellular data works as do texts. Called ATT, can't figure it out on their end.

I just went to the Apple Store and their solution was to replace my phone.

Similar Messages

  • HT204291 my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem?  How can I fix it?

    my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem?  How can I fix it?

    Hi freezebri,
    The following steps may resolve your issue:
    Apple TV: Basic troubleshooting
    http://support.apple.com/kb/ht1551
    If your TV screen appears fuzzy or black (you see no video)
    Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
    When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
    Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
    Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
    Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
    Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
    If you are connected via HDMI, try unplugging and replugging your HDMI cable.
    If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
    Hope this information helps ...
    - Judy

  • Apple has a problem and the cant solve it. I had some very important call but this new iphone just shut down on me and wont turn on i tried everything u can find in apple support nothing works for me. Anyone know what i can do?

    Apple has a problem and the cant solve it. I had some very important call but this new iphone just shut down on me and wont turn on i tried everything u can find in apple support nothing works for me. Anyone know what i can do?

    I would instead say you have a problem since nearly all IPs work as advertised.  IF you do have a bad phone, take it into an Apple store and get a replacement.  Hope you didn't jailbreak your phone though as Apple probably will tell you, you broke it, you fix it.

  • My daughters ipod shuffle was stolen.  can the new owner just start using it on a different computer?

    My daughter hadher ipod shuffle stolen.  Can the new owner just start using it on their computer?

    Yup....
    I'm sorry the only thing he has to do is restore it with another iTunes Library.
    With the iPod Touch there is 'Find my iPod' which tracks your iPod.
    Sorry
    Roemer Bakker

  • Unable to place video calls using CUPC or the IP hardphones.

    Hi,
    We have installed CUVA 2.1.1 software and the VT-II camera installed perfectly fine.CUCM version 6.0 and Presence 6.0.1
    Also get the camera Icon on the IP hard phones as well.But unable to place video calls video calls both with CUPC clients and IP hard phones locally on LAN.
    Able to launch and see the local and remote image as same on my own system.
    Any thing else that I would need to check or missed out any checklist ????
    Regards,
    Shams

    Hi CJ,
    Thanks for the info actually the problem is locally I am not able to place video calls.
    When I click on the video check option both the local and remote image are the same as the local image.
    Please suggest for placing local video calls within a single cluster what all needs to be checked.
    Here we are trying to place video calls IP hard phone to IP hard phone,CUPC to CUPC ,
    IPC to IPc.
    Regards,
    Shams

  • TS3899 I can't verify my hotmail account ? Which leads to me being unable to read/ receive my emails ?

    I can't verify my hotmail account ? Which leads me being unable to read/receive my emails ?

    How is being unable to verify your hotmail account, which is a Microsoft Service, relevant to these forums. If you can't verify your account information with Microsoft, that's something you need to take up with them.

  • Why does my 3G iPhone no longer rings nor vibrates when receiving calls and text messages?

    Why does my 3G iPhone no longer rings nor vibrates when receiving calls and text messages?
    During a two weeks process, little by little I notice my phoe doesn't ring when I get a phone call.  So Far I have missed 22 calls that I am aware of.  Moreover, the phone does not alert me when I get a text message.  Sometimes I receive notice the next day that I received a call or a text message. 

    Follow the basic troubleshooting steps outlined in the user guide... reset, restore from backup, restore as new.

  • IPhone 4 with Att, 3g, I can receive calls but caller can't hear me. I tried reboot and remove sim card. Help!

    IPhone 4 with Att, 3g, I can receive calls but caller can't hear me. I tried reboot and remove sim card. Help!

    Restart the device. http://support.apple.com/kb/ht1430
    Reset the device. (Same article as above.)
    Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • Hi, my new Iphone 6 started to show an alert that reads: "No SIM card installed" any ideas on how to fix this, now I can't use my phone and is only 1 week old... HELP SOS

    I have a new IPhone 6 just went to the store last Saturday to connect it, (I am replacing my IPhone 5s) it says that I am updated on IOS 8.0.2 but now started to show a message that reads like this: " No SIM card installed" and I have no phone line or anything, my carrier is Sprint and I just got back from there and they told me that this is something I have to deal with APPLE because they have nothing to do with software. Anybody experiencing the same thing? any light in the tunnel? HELP....

    Hello henry lfrommiami,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your iPhone gives you the message "No SIM Card installed" please follow the steps below.
    Update your iPhone to the latest version of iOS.
    Turn airplane mode on and then off again.
    Restart your iPhone.
    Check for a carrier settings update. Go to Settings > General > About. Install any available update.
    Remove the SIM card and make sure that it's a valid SIM that your carrier provided. Also make sure that it's not damaged, worn, or modified. Then reinsert it.
    A SIM tray that comes with one iPhone model won't necessarily work with a different iPhone model. When you insert the correct SIM tray, the SIM tray should be flush with the device.
    If you have another SIM card, insert it. You can use a SIM card from any phone with the same format as your iPhone SIM card. If your iPhone works with that SIM card, contact the carrier that issued your original SIM card.
    Restore the iPhone.
    If you still see the issue, contact Apple support.
    If you see 'No SIM' alert on iPhone
    Cheers,
    Alex H.

  • My new iphone 4S I am unable to get my voicemail without calling it and using the pw

    I am unable to retrieve my voicemail messages with my new iphone 4S. I went to Sprint and they told me I had bad software but apple was working on it and I should just keep checking for updates. Is this not correct and should I ask for a new phone.

    what is it doing when you call your voicemail?

  • My new iPhone is only being recognized as a camera, everything apple website suggests does not help!

    I just bought a new iPhone. When i plug it into my computer the only thing that happens is getting pop up saying its found a camera. Apparently this is normal. But iTunes does not open at all, and when I open iTunes, no matter what I do, my iPhone is unable to be recognized.. which, obviously makes me unable to upload any songs at all.. which defeats the purpose of me even having this phone, because that's why i got it.
    I've tried everything apple has suggested. Yes, my cord works. When I plug my regular iPod in, my computer still recognizes that. I have completely uninstalled then reinstalled the latest version of iTunes. Nothing. I've restarted my fully charged Iphone plenty of times. Nothing. I have restarted my computer. Nothing. i love my iphone, but this is VERY frustrating. Please help.

    This worked for me, impious, THANK YOU SO MUCH!! I used it for iOS7 and iTunes 11.1
    I used this link: http://support.apple.com/kb/TS1567

  • Does anyone know a fix for being unable to 'place' in Illustrator cs5?

    I have been using CS5 Illustrator for over a year now and have had no problems until yesterday when I opened illustrator and was unable to place any images.
    I can click on 'place' and go find the file, it appears to go through the right process then there is no image on the artboard at all, anywhere. Then I decided to open up previously made files that contain placed images and all they have is a bounding box with no image. The Links panel recognises the name of the file but no image is visable, even as a thumbnail.
    Has anyone else had this issue? I've been searching online for someone else with this problem and hopefully a fix but no solution as yet.
    I'd be so grateful of some help...thank you

    Thanks Les.
    FX has just provided an update that is suppose to fix this issue but the update fails to download...I guess I'll just wait a couple of hours until they fix it.
    In the meantime I turned off the plugin and it's now working. At the moment I just need to draw in illustrator so fonts aren't a worry for now.
    I appreciate your help

  • New Iphone just WON'T sync - I've tried everything!! Please help

    I bought a new Iphone yesterday and for some reason the lady synced it at the store (I had no idea what she was doing at that point - she told me she was 'unbricking it'). Anyway when I came home my own itunes wasn't recognising the Iphone (despite repeated attempts). So after reading up on the iphone a little bit i resetted it by deleting all data and settings. After this, every time i try to turn on my Iphone it just displays the usb and apple symbol icons, and everytime I connect it, itunes won't recognise it. Even though vista makes the "connection" sound the Iphone just isn't recognised. PLEASE HELP!! I have tried everything! Restarting comp + iphone, reinstalling itunes, downloading itunes 9, reinstalling the usb port, borrowing my brother's connection cable to make sure mine wasnt faulty. Device manager just won't recognise the iphone.
    Please help!! I bought it from a store far away so the chances of visiting it again soon are fairly slim.

    Welcome to the discussions,
    See if Apple mobile Device Service is installed and working: http://support.apple.com/kb/TS1567
    Try to connect in recovery mode: http://support.apple.com/kb/HT1808

  • Can i activate my twin sim card in a new iphone 4s while being in the States?

    Hi all! I live in Cyprus and I'm travelling to the States next week. I'm planning to buy the iphone 4s from an apple store (factory unclocked) and I would like to know if I can activate the twin sim card I purchased from my carrier here in Cyprus. The carrier is vodaphone and the reason I bought a twin sim card is that I already have another mobile device which uses a sim card. The people at the carrier's office told me that in order to activate the seond sim card (or twin card, both sim cards use the same phone number) I need to type #103# to swtich between the devices. If I was going to do this in Cyprus, it will work, but what about doing this thing while being in the States? Can I put the new sim card in the new iphone 4s that I'm going to buy, type #103# and then the sim card will be activated? Or should I need to do somethine else?
    In case I cannot do this or if there is an alternative plan (e.g., activate the sim card using a friend's iphone 4s while I'm in Cyprus?), I would be glad to hear it.
    Thanks in advance for your help!!!

    In my OPINION, you will not be able to activate your SIM issued from Cyprus while in U.S.A. The simple logic is, your "future SIM" will be on roaming in U.S.A. and in order to search for the signals for roaming partner carrier and get registered (provided that there is a roaming partner of vodaphone Cyprus in U.S.A.) it needs to be activated first. So, you need to activate your SIM in Cyprus to be able to use it with a compatible roaming partner in U.S.A.

  • Why cant I import my Nikon D800E NEF files - just started recently - "unable to copy a file"

    Why cant I import my Nikon D800E NEF files in LR 4.3 - just started recently -I have been doing the same thing for months and never had a problem. "unable to copy a file to location"

    Thanks, but no I do have plenty of space. What I just did was to move the NEF files off of my card and into the location I wanted them. I then just did an import move to the same location. This is just all very odd because it always had worked fine in the past. I do appreciate you trying to help.

Maybe you are looking for

  • Wife about to give birth and Disk Utility failing to repair HD.

    Good morning. Starting last night I began having serious issues with my 2007 20" 2.4ghz iMac. I hope someone can help before I employ the "nuke" option. First a little background. My wife is about to give birth to our second child. I have several in-

  • Error in Database monitoring in Solution Manager Diagnostic

    Hello All, I'm facing issue in configuring Database monitoring for Java system (EP/PI) from Solution manager . It could be configured from sol man diagnostic>Diagnostic System>Managed system>Database monitoring, iei'm unable to have java system in DB

  • Auto Goods Receipt posting in ECC using VL32N

    Hi , We have a situation where in we have to post Goods receipt in ECC thru inbound IDOC with reference to  SNC - ASN. Till now we thought of using MBGMCR  - Message type with Idoc type : MBGMCR03. As MBGMCR uses BAPI - MB_GOODS_MOVEMENT - It calls i

  • Crashed, opens to spinny wheel which does not go away, even when restarted

    This happened on my macbookPro... and as I am in the process of erasing everything and doing a clean re-install it started happening on my desktop. Anyone know what caused this? or how to fix it without erasing my computer?

  • Camera RAW 7

    I'm using the Beta version of CS6 and there is a CAMERA RAW 7 program that I would like to use in my Elements program. The RAW editor in Elements (current) always has the sliders in a pre-set configuration, not at zero. Using CS6 Beta, the Camera RAW