New iPhone and Airport Express

I wasn't able to find a direction to go with my issue through "search" so I thought I'd just throw this out there if someone has an idea.
I am connect by cable modem to my iMac (not wirelessly) but use the Airport Express upstairs for my stereo for itunes and it works great. My iPhone registers my "wireless" connection when I go into wireless mode, accepts the password and shows the signal but then hangs up and I get "Safari can't open the page because it could not connect to the server" message. I've reset all the devices and still can't get past this message. My iPhone will connect wirelessly in other locations but I'm baffled that I can't get it to work in my home.
Is there some setting I'm missing? Any suggestions would be helpful (the Apple store didn't have an answer for me)!

Hey Somawise,
Start by updating the iPhone http://docs.info.apple.com/article.html?artnum=305744
What is the IP address of the iPhone? Goto Settings> Wi-Fi> tap the blue (>) next to your network.
If the iPhone has a 169.254.x.x IP address take a look at this article http://docs.info.apple.com/article.html?artnum=58618
What wireless router is the iPhone connecting to? Is it connecting to the Express or do you have another router?
What type of wireless security is being used? How many characters are in the network password?
http://docs.info.apple.com/article.html?artnum=108058
Jason

Similar Messages

Airplay from iPhone to Airport Express - no sound?

We have two of the new Mac Minis, one new Airport Express and 4 iPhones in the house - and we can use Airplay from both PC´s to the Airport Express hooked up to the stereo - works fine!
And we can se the Airplaybutton on the iPhones and the name of the Airport Express - but we don´t get any sound when we push the button and it turns blue?
We have rebooted alle the devices, made restores, reconnected - but no sound? I just don´t get it?
Message was edited by: Joost40

Same here:
- iPhone 4 with iOS4.2;
- Airport Express with latest firmware;
- Airplay on iTunes 10.1 with Macbook Pro works fine on my home stereo equipment;
- installation of iOS4.2 went fine;
- rebooted already both iPhone and Airport Express;
- Apple support told me to restore original settings on my iPhone, which I didn´t do but very much doubt would help anyway (the lady working for Apple Support didn't even know what "Airplay" was).
I think we are facing a bug and must wait for an Airport Express (or even iOS4.2) software update.

I need a new modem. Which modems work well with MacBook Pro and Airport Express?

I need a new modem. Which modems work well with the MacBook Pro and Airport Express?

You need to inquire from your ISP which modems are compatible with their netwrok. They should give you a list.

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

Wireless modem and Airport Express.. one at a time

Recently my internet provider upgraded my old plug in modem to a newer wireless model. Now it seems that the current setting allow communication with only one or the other at the same time. If I want to be online with the wireless modem and send my iTunes music via Airport Express to my sound system, no dice. I have to either click on the modem up in the Airport choices to be online and listen to iTunes through the computer speakers, or go offline to listen to music through the sound system and Airport Express.
I'm sure I'm just missing something in preferences or settings somewhere.
Can someone point me in the right direction?
Thanks, and Happy New Year!

No ideas?

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

Connecting wireless modem and airport express

I currently run internet with an old Motoirola Sideboard cable modem and Airport Express - previous version. All runs well. Now my Optus provider has upgraded my service with a Premium account for higher speed. They have also given me a free wi fi Cisco modem - DPQ3925. How can I replace my old Motorola modem and still maintain Air play etc with my new modem using Airport Express. I need to know exactly wire per wire help - please, if possible - Thanks
Mac

Hi - I have a similar issue.
I have a new macbook pro, ATV (3rd Gen) and AXn (purely for Airplay of itunes).
All three are wirelessly connected to my HG556a Huawei WiFi Router.
The Macbook pro and ATV work fine and can see each other for airplay mirroring and itunes.
The AX connects and comes up in Airport Utility (AU) and itunes shortly after you turn it on, but if you either dont use it or stop using it and switch to ATV or whatever it dissapears from itunes and AU says it cant find it. Randomly the light on the AX stays green the whole time.
I have to switch the AX off and on to get it back working again (i.e. itunes and AU can see it).
Following other forum posts I've set the AX up by hard connecting it to my router, setting a static iP and reserving ports 5353 and 3689 to that address. I've also turned off ipv6 or whatever using the networksettings Terminal code string. I have also repaired permissions with disk utility!
It still dissapears from available options in iTunes and AU. ideas?

Network set up using airport extreme, time capsule and airport express

I have searched for relevant answers but can only find different bits here and there.
My set up is as follows:
I have a Linksys wireless router running a stable wireless network for the other computer users in the house and wish to create an extended, additional network using airport extreme connected to the Linksys by ethernet to create the network and then time capsule close to my Mac Mini on my desktop and airport express at the other end of the house to try and extend the range of the network.
I have been trying for 4 days to set this up but without success. I have tried all of the options mentioned in different posts, using WDS, extending a new network etc. I can get connection between the three devices but monitoring on iStumbler there appears to be little improvement in the strength of the signal, iStumbler also shows the time capsule dropping it's signal totally every 10 or so seconds for a few seconds and then I get a positive signal strength for another ten seconds or so.
Can anyone help, it is driving me insane. I am a recent convert to apple computing and have been hugely impressed with all products until now. The claim that the set up of these wireless products is simple seems to be very exaggerated.
I am happy to provide any relevant system or hardware information.
Thanks in anticipation.

I have an AirPort Extreme acting as a wireless base station, connected to a BT router by ethernet.
Then the correct setting for Connection Sharing on the AirPort Extreme would be "Off (Bridge Mode)".
If I set Connection Sharing to "Share a public IP address", I'm told that: "The DCHP range you have entered conflicts with the WAN IP address of your Apple Wi-Fi base station"
Exactly. You have two routers....The BT device and the AirPort Extreme in series with both of them trying to act as the "main" router when you configure the AirPort this way. That won't work.
Only one can be the main router, and it must be the BT device in your setup. So, the AirPort Extreme....and any other AirPorts on your network must be setup to work in Bridge Mode to allow the network to operate correctly.

How to setup ADSL moden router and Airport Express 802.11n (1st Generation) to provide internet and airplay connections to multiple devices?

I have a Netgear wireless ADSL modem router (wireless + four ethernet out ports) that i'd like to connect to a 1st gen Airport Express to create a small home network to provide internet access for a MacBook, iPhone and Apple TV, and to provide Airplay connection to the Apple TV and Airport Express audio output jack.
I'd like to turn off the wireless function of the ADSL modem router, and to have from one of its ethernet out ports an ethernet cable providing internet directly connected to my MacBooks ethernet port.
Then from one of the other ethernet outs on the ADSL modem router an ethernet cable connected to the Airport Express's ethernet port. This would be to provide wireless internet connection for the Apple TV and iPhone via WiFi from the AE.
At the same time as the MacBook is receviing internet soley via the ethernet in port, i'd like it to have WiFi connection to the AE to provide Airplay connection to the Apple TV and the AE's audio out jack.
Is this all possible? How should I go about to configure this? How should the AE's ethernet port be configured?
Any special modes the ADSL modem router or Airport Express should be in? ie bridge or client?
Thanks

On the ADSL modem router web-based interface, should I set any security setting? I think not as there'll be no wireless signal coming from it, only wired ethernet connections to both MacBook and AE. Security should only be set on the AE to prevent someone from accessing its WiFi signal. Is this assumption correct?
These are all correct!
How should I go about setting up security for this network?
First I would recommend that you configure the AirPort Express for WPA2 Personal. This will provide you with the greastest level of security while still providing excellent bandwidth performance.
You would configure wireless security for the Express by using the AirPort Utility on a Mac, PC, or iOS device. Using your MacBook Pro as an example, you would do so as follows:
Run the AirPort Utility.
Select the Express, and then, click on Edit.
Select the Wireless tab to enable it.
Set the Wireless Security option to: WPA2 Personal
Enter the desired password in both the Wireless Password & Verify Password fields. Note: Use of a "strong" password is encourage here. By strong, I mean use a mix of upper/lowercase letters, numbers, & punctuation marks. Try not to use common dictionary words. If you operate your wireless in an area where security is of an utmost concern, I would further suggest that you change the wireless security password every 60-90 days. Also don't forget to change the default AirPort Base Station Administrator password as well.
Click on Update and allow the Express to restart.

Apple TV doesn't show up in iTunes when AirPort Express is running at the same time - Can't play music on both Apple TV and AirPort Express speakers together

Hi there!
I am trying to play music from my Mac on multiple speakers, Apple TV and AirPort Express. But as soon as the AirPort Express station is plugged in, the Apple TV does not show up in iTunes anymore. When trying the same using iPhones Remote app it works perfectly.
Does anyone of you have an idea why iTunes does not show me both Apple TV AND AirPort Express? (it has nothing to to with the IP adress as the adresses are different).
Thanks for any help!

As my english isn't too good I made a screenshot to show you what I mean.
As you can see in the image below iTunes only shows me the computer speakers and the AirPort Express. But at the bottom you can see that iTunes actually recognized 3 different speaker (Mac, AirPort, Apple TV 2). Why does the Apple TV not show up in the multiple speakers window? Any ideas?

I just purchased Apple TV AND AIRPORT EXPRESS. I am questioning if I need it when I already have a Netgear Powerline AV 200 Adapter Kit XAVB2001. Does the Airport Express do the same thing?

I just purchased Apple TV AND AIRPORT EXPRESS. I am questioning if I need it when I already have a Netgear Powerline AV 200 Adapter Kit XAVB2001. Does the Airport Express do the same thing?

Thank you so much. Any specifics I should know about prior to connecting? The goal is to watch Netflix from my iPad or iPhone 5 on my tv (located in different room from where Comcast internet modem is hard wired to main computer in house). Movies would depend on wireless transmission to a smart tv not connected to modem.

Is there a limit to the number of airport extremes and airport expresses one should have in a network?

Is there a practical limit to the number of airport extreme base stations and airport express units one should have in a home network?

Then, I had an older Airport extreme that I was thinking about connecting wirelessly in my living room and connecting the DirectV DVR to it by ethernet cable.
Is this older AirPort Extreme the "round" version or the "square" shaped version? The "round" version will not do what you want.
Whenever you extend an AirPort using wireless only, you will experience a loss of bandwidth (speed) on the entire network. That loss might be anywhere from 15-50% depending on how far the extending AirPort device is located from the "main" AirPort.
Even with an excellent signal, if you have 3 AirPorts extending the signal, you will lose 40-50% of the bandwidth on the network. The other AirPorts that are being used just for music are also slowing things down.
He thought there might be problems with using that third airport with the DVR and wondered if I should just use an Airport express there.
It would make no difference whether you used an AirPort Extreme....assuming it was the "square" version or a new AirPort Express as far as performance is concerned.
As to whether you connect the DVR to another AirPort, it might be OK, but you will not know until you try.
If you find that things slow down noticeably, you will need to look for ways to connect the AirPorts together using a wired Ethernet connection. This is always the preferred connection method since there is no bandwidth loss when you do this.
Since downloading video places a high demand on a wireless network, you might want to look for a way to connect the DVR back to your "main" router directly using a wired Ethernet connection as well.

Dumb with Wirless and Airport Express

I have thought about purchasing an airport express for a while so that I could play music from my desktop which is connected to a cable modem on my component stereo. By a stroke of Christmas spirit a friend of mine gave me his airport express because he no longer needs it.
In order to do make this work, do I need to buy a router and a wireless usb adapter for my desktop despite proximity to modem…. Or can I get by with simply the wireless USB adapter and airport express.

In order to do make this work, do I need to buy a router and a wireless usb adapter for my desktop despite proximity to modem…. Or can I get by with simply the wireless USB adapter and airport express.
Good news, the AirPort Express Base Station (AX) is a wireless router so you don't need to acquire another to make this work. However, you will need to add wireless capability to the desktop.
Your network configuration would be something like the following:
Cable modem > (Ethernet cable) > [Ethernet port] AX > (wireless) > PC, AND
AX [Audio port] > (Audio cable) > Stereo
OR
Cable modem > (Ethernet cable) > [Ethernet port] PC > (wireless) > AX [Audio port] > (Audio cable) > Stereo

Creating a bridge with airport extreme (base) and airport express

i am having trouble creating a bridge with airport extreme (base) and airport express. i got the airport express to connect to my network. Airtunes sees it fine. i have an iMac (running Tiger) connected to the airport express via ethernet which i was hoping to get internet on (the iMac doesn't not have built in wireless and i had a spare airport express). now the airport express is no longer visible to the airport setup assistant on that iMac. but, like i mentioned, Airtunes is working fine, and the light is green.
i'm new to the wireless stuff. i am sure i just missed a step. how do i get the iMac to connect to the internet via my airport express bridging to my airport extreme wireless network?
your help is appreciated.

You can do this with the equipment you have. Configure the AirPort Extreme base station (AEBS) to act as a WDS main base station and configure the AirPort Express (AX) to act as a WDS remote base station. That will allow you to use the Ethernet port on the AX.
Unfortunately WDS also causes the available wireless bandwidth to be cut in half.

Question about Time Capsule and Airport Express co-existence

I have a new 3TB ME182LL/A Time Capsule attached to my wired home LAN, in bridge mode. It works fine both as an access point on the upper floors of my home and as a Time Machine device. I also have an Airport Express, whose function in my network is solely to control my whole-house audio system from ITunes. I don't need, want, or use the wireless networking features of the Airport Express. I just have an audio cable running from it to my stereo, and an Ethernet patch cable connects it to my wired LAN. The network mode in the Airport Express is set to "off". Historically, the Airport Express has worked fine in this wired lan mode. However, I unplugged it at some point while having some initial trouble deploying the new Time Capsule and only turned it back on today. After turning it back on I observed something strange. My speedy wireless connection upstairs via the Time Capsule became slow. And when I launched Airport Utility, it drew a network diagram which showed my Time Capsule as a CLIENT of the Airport Express. In other words, the network diagram showed Internet at the top, then a vertical line down the the Airport Express, then the Time Capsule below that. The correct / desired diagram would be the Time Capsule and Airport express as peers. I connected to the Airport Express and verified that network mode was set to "off" but the incorrect network diagram persisted (as did poor wireless performance) until I unplugged the Airport Express. After I did that, the Airport Utility drew the network correctly, although of course it showed a yellow caution sign next to the Airport Express, since it was down. And my wireless speed / reliability returned to normal. What is going on here?

The automatic setup in the airport utility has changed something.
Is the line down to the TC from the express dotted.. in other words is wireless??
Funny stuff happens.
Please post the screenshots of the 3 pages from the airport utility setup for both airport express and TC..
Make sure wireless is set to off in the express.
Both should be set to dhcp on the internet tab and both set to off bridge mode on the network tab.
So for example the bridge on the network tab.
The summary page can also be a help.
There is a half summary page when you click the item in the airport utility.
There is also a fully summary page, when you hold option key and double click the TC icon for example.

New iPhone and Airport Express

Similar Messages

Maybe you are looking for