New iPhone4 speaker click

Just got a new iPhone4 having a small issue with the speaker and its to do with the speaker as it goes in and out of power save mode i expect, and only when its quite around you but annoying all the same..
If you use any app or do anything that generate a noise you can hear the speaker come on and the noise as you should, but after about 2-3 sec if you do not press anything else and if you do not touch anything you hear an annoying click as the speaker is turned off as no longer needed.
Easiest way to repicate is to go to phone mode and switch between contacts and keypad, get the same click (and its not keyboard clicks) and its extremely annoying in quiet situations....
Just wondered if this is something i have to live with or worth returning to the store to get resolved / replaced ???
Thanks
Chris
Message was edited by: Chris Warren

That shouldn't be what happens with the speaker so if you take it to the store, they should replace it if you can replicate it in front of them. Even if you cannot but be polite odds are they will still replace (as long as the phone is in good condition still).
But always best to call 1-800-MY-IPHONE and make an appt at nearest Apple store first so you can be waited on right away. Walk-ins take time if busy which I am sure they will be this time of year.

Similar Messages

I did not sync music properly to computer from iphone3. have new iphone4. how can i get music off old phone onto new one. new phone all set up. help

I did not sync my iphone3 music to my computer. Thought I did it properly but did not. New at this stuff. Now my IT person installed and configured my new iphone4 and my music is on old phone. Anyway to get it to new phone. Help.:)

Set up your new phone as if it were the old one. Settings, mail, mobile me, same email same password that you used on old phone. You can still sync the old phone to iTunes library. You may have to click on picture of phone on the left & click on back up iPhone. You'll see songs, contacts & calendar downloading in apple slot at the top. When done connect new phone. Authorize computer put in apple ID when that screen comes up & that should allow both phones to share the library. If you use the same ID the same information will be on both phones.

When I plug in my new iphone4 itunes tells me to download the latest itunes software, so i downloaded itunes 10.2.2 but i still get the same message? i have the feeling that itunes never downloaded?

I got a new iphone4 today, inserted the new sim card, and plugged it into my macbook
It then popped up with a message along the lines of 'you need the intunes 10.1 or newer to run this iphone4' so i downloaded the latest version of itunes (10.2.2) and tried to re plug in my iphone4, only to get the excact same error message!?
I clicked on the Itunes >> About Itunes tab in my itunes top drop down options bar (across the top of the screen) and it says Im still on itunes 10.01? Am I downloading the software wrong?
Tahnkyou!

By run the installer do you mean go through the stages such as agreeing to the terms and conditions, and deciding where to save the new program (in Macintosh HD) as I did all of that as well?
Sounds like it installed ... I'd check to see if you're still opening an older version on your system as per the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X

HT2844 iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working...

Hello,
My iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working through that port. I tested the speaker system through my iPhone, and it works fine. I hooked it up to the Headphone out/Optical digital audio in port, and it works through that port also. I did a computer restart, I also checked all wiring and did a system repair on the computer. I also restarted the computer in mode where I could use the system utility, and the computer still did not correct the matter, and it reported everything as being "ok". I wented into "sound", through system preferences, and the computer does not recognize anything I plug into the Audio in/Optical digital audio out port. When I plug the speaker sysytem into the headphone out/optical digital audio out port, it does recognize the Bose speaker system as being "headphones".
Reading through a lot of forums, I hear everything from compatibility, to the port being stuck, and on and on. Since the port was working before, and just quit working one day, I wonder if there is a capacitor or fuse or some type of similar thing is blown, and causing the port to be unfunctionable. Maybe the port went bad, but before this time, I had never used it, and the computer does not move around, and I never plug in and pull wiring out unless needing to, and that being rare.
Here is a link to Costco, where I bought the system, and the exact system I have, if this is any help: http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=bsd&cs=04&sku= A4092931&ST=pla&dgc=ST&cid=262075&lid=4742361&acd=1230980794501410
By the way, I am running OS X Mountain Lion (10.8.5). I upgraded to Mavericks about a month ago, and expeirienced a number of issues, and had to take my iMac into Apple. Talking with the tech, I decided to wait for a while more before I upgraded to Mavericks. I try and keep the computer maintained.
If any of you have any ideas regadrding wear and tear, and fix I can do, etc., besides having to take my computer into Apple? Thank you, and potentially all of you, for your time and effort in helping me with this issue. Thank you kindly.
davE

Okay, davE, first, you have posted in the "Mac Pro" forum (not Macbook Pro), so we can't be super helpful
but we help you. First, hold down the Option key while clicking on the speaker icon at the top of your screen. This should show you all the inputs and outputs you have. you could check in "About this Mac" then "More info" to see whatever's recognized. Then, maybe, fire up Audio MIDI. your speaker system should show up there. something might have gotten set incorrectly. You can test it there. I guess you are using the good ol' analog cable for connection, and it works on your iPhone, so the cable isn't bad. You could try this. it 's an adapter which might solve your problem
http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
depending on which model of Bose speaker you have, you might try doing a product reset
turn off speakers...unplug power cord from outlet...wait 1 minute..plug cord into outlet..turn on speakers..
\\turning off automatic standby||
press and hold top of control pod for 6 seconds until you hear 2 tones that go from high to low
other than that ,I don't know
John B

My new iPad speaker crackles when listening to some music or games. Is my speaker dying out on me? Can this be fixed?

When I listen to loud or deep bass music, my new iPad speaker crackles. Is this a common problem with iPads? Can this be fixed? How much is it? My warranty is expired.

LambChops1,
I’m using Mavericks, and it’s still possible to select text to drag and for cutting and pasting. Left-clicking and right-clicking is still possible, too.
Try opening the Trackpad pane of System Preferences, and select the Point & Click tab. To right-click, ensure that your “Secondary click” checkbox has been checked; the small print under “Secondary click” is a dropdown menu which allows you to select the form of right-clicking that you prefer. (For instance, mine is set to “Click in bottom right corner”.) For left-clicking, is your “Tap to click” checkbox checked, or unchecked? (Mine is unchecked, since I prefer pushing for left-clicking over tapping to do so.)

New Iphone4 - bad password

This seems to be a recurring problem for this model phone. I have not seen a solution in reviewing the other posts. My new Iphone4 is unable to access the home wifi even though other devices in the house do. It tells me the password is not correct.
I have turned the At&t router/modem off for 5 minutes and the iphone off for 5 minutes. When I click on the wifi site it is not populated with addresses like my wife's 3g nor does it say "renew lease".
Do I have to go into the router and change the password?

WPA or WPA2 both should work fine although I prefer WPA2-AES. It's the most secure of the bunch. How many numbers are you using for a password? A good 8-12 character password is your best bet. A mixture of letters, cases, numbers, and special characters make a virtually unbreakable password. Something like Pas$worD for example.
The other thing you should check is your router firmware. Older routers that have not been updated have problems with the latest encryption algorithms used with iOS 4.x. Update the router firmware if an update is available, if one is not and the router is old, plan on replacing it.

My new iphone4 won't connect to the app store or iTunes. It says cannot connect to iTunes. But I logged into the game center and onto this web sit. I tryed some fixes on here but nothing has worked. Suggestions?

My new iphone4 won't connect to the app store or iTunes. It says cannot connect to iTunes. But I logged into the game center and onto this web sit. I tryed some fixes on here but nothing has worked. Suggestions?

HI again Andy,
The last message had some more stuff in between the "Hello" and "Regards" - I have no idea what happened to it. But nevermind...
I started up the Mini with the modem in one usb, and the speaker system in the other (M-Audio Sonica Theatre) - I have one of the Minis that have only 2 USB (and one FireWire) ports. The firewire has the external drive connected to it.
So far, as I"m typing this, I AM able to be online and use iTunes simultaneously. (both SaFari and iTunes respond slower than if I was using only one or the other, but they ARE actually working - in addition to having Adium running) - So I think what you suggested ( that is was something wonky was the USB hub) was a correct, yet assessment.
Would you have any reccommendations for USB hubs? The only thing that I have connected to the hub under normal circumstances that would be constantly "running" would be the RadioShark (even though the Radio soft isn't playing - the blue light on the RadioShark is always on) - and the speakers naturally. Everything else is of the occassional variety - iPod Sync Cable, Dual Layer External DVD Burner, and a "pass thu" to the USB ports on my Hard Drive Enclosure (which had been unplugged before the problem was noticed). The hub I current use is the
Kensington DomeHub USB 2.0 (7 ports) Weighted Hub 33118 http://www.amazon.com/Kensington-DomeHub-ports-Weighted-33118/dp/B0002FHENE/ref= sr16/002-4275642-8664817?ie=UTF8&s=electronics&qid=1187848108&sr=8-6
which (I thought) worked better than the "throwaway" ones I had used previously.
You think it is the hub or something connected to it that may be causing the problem?
Regardless, thank you for your time, and I hope to hear from you soon.

Hi, I don't know who to turn to: the person who handles all the compter stuff is out of town, This A.M.I started up Firefox and there was a message re an update, I thoght I new just to click on install and wait to re start Firefox. But what I can remember

Hi, I don't know who to turn to: the person who handles all the compter stuff is out of town, This A.M.I started up Firefox and there was a message re an update, I thoght I new just to click on install and wait to re start Firefox. But what I can remember is that another window opened and asked me to choose 'something' (an icon or banner or?), I thought I must click something (I guess I should read all clearly). Firefox did update to 3.6.4, but it also inserted some sort of what might be called a banner? But it only partly covers the right one- half of my 3 toolbars at the top of the Firefox window. It can't be used for anything as it is just a mess of colors and unknowns, except what looks like a 'top' and what I recognize as a Firefox icon (but only partly visible)!! Now, what it does do is partly hide that whole portion of the toolbars and they are hard to read and in turn make this 'thing' impossible to figure out, if I would care to? I can't find anyway to remove it or use it?? But since the Firefox icon is on it, I guess you should know what it is and how to trash it. I am sorry for this occurrence caused my my carelessness, but I'm not much of a computer person ----HELP! Thank you for any help. Judi
== This happened ==
Every time Firefox opened
== Today, Thrsday June 24, 2010

The only thing I can imagine: it's a [https://addons.mozilla.org/en-US/firefox/personas/ Persona].
Tools->Add-ons->Themes
Here should be the persona (lightweight theme)
and a button "Remove"
Click it (button Remove), and it (Persona, this mix of colors) should go away instantly.
Does it help you?

TS3899 issues sending email using my gmail account on my new iphone4s.

so i was having issues sending email using my gmail account on my new iphone4s. i called my provider, att - to fix the issue, mine anyway, under settings - general - reset - reset network connections. fixes the send issue. releases all of the other junk that was left on your old phone.

Hi Jari,
Thanks to reply me.
There is an workspace details where user solve that problem but now i have troed to access that workspace but its not working .i have cofusion how can i do this where i put
apex_mail.send(
p_to => v_recipient_list
, p_from => v_from_list
, p_subj => 'Hello world'
, p_body => v_body
, p_replyto => null);
this package
and how to and where set SMTP of Gmail and i don't know about gmail SMTP Server Specification
i ahve jus create a form with
P1_TO Text Field
P1_SUBJECT Text Field
P1_FILE_BRE File Browse...
P1_COMMENT Textarea
Please guid me...how can i do that step by step
Thanks

I just updated to Firefox 17.0.1 and now I can't click on a bookmark to open it or open new tab when clicking new tab button.

In FF 17.0.1 I have several bugs to mention. I am only able to open bookmarks by right clicking them and selecting Open In New Tab from the drop down menu. I am unable to open a new tab by clicking on the new tab button or by clicking open new tab from the FF drop down menu at top of browser. Also, none button work in FF, such as Home, Back, Forward, or refresh. This is so aggravating!!

After I posted this, I restarted with add ons disabled and it worked..deleted a cpl of addons for compatibility checking and that fixed it.

I just got my new iPhone4 set up today and it has pulled in every email that is in my desk top as being unread. Yet I have read all the emails. Still the iPhone thinks they are unread. Does anyone know how I can delete all of these at one time?

I just got my new iPhone4 set up today and it has pulled in every email that is in my desk top as being unread. Yet I have read all the emails. Still the iPhone thinks they are unread. Does anyone know how I can delete all of these emails at one time from the phone?

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

How do I get the sync of my 3GS on my computer to transfer everything (files, apps, etc.) to my new iphone4? And then how do I move the sync to a newer computer so I can sync the new phone with the new computer?

How do I get the sync of my 3GS on my computer to transfer everything (files, apps, etc.) to my new iphone4? And then how do I move the sync to a newer computer so I can sync the new phone with the new computer?
My 3GS is dying and it's synced to an older computer. I have tons of datafiles as well as apps, music, text messages, etc. that I need to get moved to the new iphone4 I'm getting. Then I need to move the sync to a newer computer so that I can sync the new phone and new computer.
I understand how to get my apps to transfer to a new pc. That's not the issue. It's getting ALL the data from the 3GS to the 4 and then to a new computer.
Thanks.

Thanks much, that's very helpful for step one (getting old phone onto new phone). Very clear.
However, I still have the problem of moving to the new computer. How do I move the sync to the new computer after the new phone is set up?

How can I set a value in a field before create when a New button is clicked

Hi,
I am using
JDeveloper 10.1.3.1.0.3984 and
JHeadstart 10.1.3.1 release 10.1.3.1.26
I have one group and there is a detail group under that group.
From main group to detail group there are 3 field relating those groups.
field1
field2
fieldSEQ (auto-generated by database trigger)
These 3 fields are PK.
In the detail group, there is a New button. So, when the New button is clicked, it tries to create the record with those 3 fields value as those are coming from main group. As a result it's giving the duplicate error as that record already exists in the table.
But I don't want to create the record with that SEQ as that will be created in the trigger.
How can I set the SEQ temporarily any no. (-1) before create when the New button is clicked?
Can anybody help?
Thanks
Syed Jabbar
University of Windsor
Windsor, ON, Canada

Hello Syad,
What I would suggest is setting the sequence number at the creation of the entity object (so in the create() method) by using the database sequence. This way it will always be unique.
So something like:
protected void create(AttributeList AttributeList) {
super.create(AttributeList);
SequenceImpl sequence =
new SequenceImpl("KCP_SEQ", getDBTransaction());
setFieldSeq( sequence.getSequenceNumber());
If this still does not solve it: please go to the ADF Forum since this problem is an ADF problem, not a JHeadstart problem.
Regards,
Evert-Jan de Bruin
JHeadstart Team.

Create new vi by clicking on a button in front panel

Hi. I'm quite new with Labview.
I have to use an if statment to enable a button(I dont know whether it is possible or not in LabVIEW) then when the button is enabled to user should click on the button(lets say NEXT button) to close that vi and open another vi from a specific address.I don't need to save anything from the previous vi I just need to close it and open another one .
Does anybody know how to first enable a button as a result of getting correct answer from an if statment and also how to close and open new vi by clicking on that button.
Many thanks.
Solved!
Go to Solution.

I think that the attached will help you a lot further. I've documented where needed. If you have any more questions, don't hesitate to ask.
Open Main.vi and run it
Kind regards,
- Bjorn -
Have fun using LabVIEW... and if you like my answer, please pay me back in Kudo's
LabVIEW 5.1 - LabVIEW 2012
Attachments:
en99.zip ‏32 KB

Open in a new window on click of hyperlink

Hi,
I have created a BSP application which display partner details. here Partner ID is a hyperlink. On click of the hyperlink it is opening in the Same page. I need to open this in a new page.
below is the code
        <htmlb:tableViewColumn columnName    = "PARTNER"
                               type          = "LINK"
                               linkColumnKey = "LINK"
                               title         = "Partner ID" />
Please provide me some inputs for me open the link in a new window on click of the hyperlink.
Regards,
Shiny

Hi,
Just add the "linkClickTarget" parameter, like this:
<htmlb:tableViewColumn columnName    = "PARTNER"
                               type          = "LINK"
                               linkColumnKey = "LINK"
                               linkClickTarget = "_new"
                               title         = "Partner ID" />
Best regards,
Tanguy

New iPhone4 speaker click

Similar Messages

Maybe you are looking for