New ipod 60gb and windows 98

I got a 60gb Ipod but only have windows 98...is there an Itunes that would work with windows 98 so I can download onto my new Ipod?

If I'm not mistaken...the requirements listed on the new video iPods are the same as the new nano: Windows 2000 (SP4) or Windows XP/Pro (SP2) plus iTunes 7.0 or later.

Similar Messages

  • HT1477 I am trying to install a new iPod Shuffle and my pc does not pick it up.  My pc is running windows 8.1 os.  I do not see that os in the list of operating systems.

    I am trying to install a new iPod Shuffle and my pc does not pick it up.
    My operating system is Windows 8.1 and windows 8 does not appear
    in the list of operating systems.

    You are referring to OFFICE 2010, not Windows XP or 7.
    And which version of Windows do you have?
    NEVER begin before you have a backup, ideally one you have tested and know works.
    You don't really install Boot Camp, the Assistant is a partition tool utility.
    You may just want Office 2008 for Mac.
    If you need Office for Windows, perhaps run Windows in a VM like Parallels or Fusion.
    Buy some backup drives and start using TimeMachine for one backup, then weekly backup with SuperDuper.
    IF there is now a partition for Windows, all you need is to buy Windows, and I would recommend Windows 7 Home Premium (retail) which is about US$149.
    Has nothing to do with free space. Office 2010 isn't to boot from. In fact, you can copy the disc to a folder (1.25GB) and run SETUP from there.

  • I have a new iPod touch and when I connect it to my pc and itunes, a window says "this ipod cannot be used because the Apple Mobile Device Service is not started."

    I have a new iPod touch and when I connect it to my pc and itunes, a window says "this ipod cannot be used because the Apple Mobile Device Service is not started."

    This might help restart it http://support.apple.com/kb/TS1567

  • New ipod 60gb video and monster icar transmitter?

    Is my monster i-car charger and fm transmitter compatable with the new ipod 60gb video?....response would be much appreciated,
    bAz Ireland.

    In short.. you can't use those accessories with the 5th Gen iPod.

  • IPod Touch and Windows Vista 64bit

    I got a new IPod Touch and when I try to connect it I get a window with this message:
    "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes"
    Where is the 64-bit version!!!!!!!!

    No 64 bit version yet. I got multiple iPod Touch devices for my family for Christmas last month from the Apple store. I asked in the store if they would work with 64 bit Vista and was told yes. The box says Vista. I'm considering trying to get them to take them all back, since all my machines in my house are Vista 64 bit.
    To the people that point at the iTunes compatibility list: well, that's not printed on the side of my iPod box, and was told by the Apple guys it would work.
    To the people that say 64 bit Vista doesn't work with many programs: Find me one. As all of my companies 383 apps certfied on it, and everything I run at home works just fine.
    It's been out OVER a year (XP 64 bit has been around for YEARS). Come on Apple! Give us a 64 bit driver!

  • I have a brand new Ipod touch and it will not sync.

    I have a brand new ipod touch and I cannot get it to synch with my itunes.  I have two other Ipod Nano's that will synch up just fine.  The computer has windows XP with the latest service pack on it.  It does not recognize it as a device in windows, but sees my other two ipods.  I have the latest itunes software on it.  I even uninstalled it and reinstalled per the apple web site.  I connected the ipod touch to another cpmputer and the usb port sees it as a device just fine.  What do I need to do to this thing to get this computer to see it?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    The iOS devices use differnt drivers than a Nano and other simple iPods

  • Bought a new ipod nano and the computer won't recognize it

    I just purchased a new ipod nano and have my itunes on Windows 8. I've connected it with the supplied cable to USB 2 and 3 and every time I receive a message a new ipod has been connected but it is not recognized by itunes.
    How can I make this ipod work so I can set it up and start using it?

    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • New IPOD nano and getting HKEY_LOCAL_Machine\software\Classes\quicktime

    I tried to install the software for my new iPod Nano and it would nto load for this message:
    could not open key: HKEYLOCALMACHINE\Software\Classes\QuickTime,QuickTime\CLSID. Verify that you have sufficient access to that key, or contact your support personnel. I've tried shutting off the firewall and made APPLE a trusted site. I even removed the old Quicktime from my computer and this did not work. Please help this not very tech savvy old lady.

    I had a similar error:
    Could not open key:
    HKEYLOCALMACHINE\Software\Classes\QuickTimePlayerLib
    .QuickTimePlayerApp\CLSID. Verify that you have
    sufficient access to that key, or contact your
    support personel.
    Apple help told me it was a Windows problem and that
    I needed the Service Pack 2 (SP2). I already had that
    update, so that alone was not the problem. In surfing
    the net, I found an answer for my error that worked
    on bleepingcomputer.com from HitSquad. Here it is, it
    may work for you too:
    Click Start>Run and type "regedit" (without the
    quotes)in the Run dialog box and click OK. This will
    open the Windows Registry Editor. In the left side of
    the window, navigate to the path in the error
    message. HKEYLOCALMACHINE is the top folder,
    Software is the next folder, etc., etc. Right click
    on the Quicktime.qt folder and select
    "Permissions...". In the Security tab, it should list
    Group or user names you have. Select a user name and
    in the lower part of the window, make sure "Full
    Control" and "Read" have check marks under "Allow".
    Click "Apply". Now log back on under the username
    listed in the upper part of the window.
    Mine had a strange twist, even though I am an
    Adminstrator on my computer, for some reason, my user
    name was not listed. My son's user name was - maybe
    because he loaded the itunes initially? I changed his
    account to administrator and loaded itunes and
    QuickTime under his name and the error went away.
    Anyway, itunes 7 is now working. I'm no expert, but
    this worked for me. Good Luck!
    JB
    This was a fix for me. I have to use my wifes log in to windows. I think she might have loaded the itunes a while ago under her log in. Good Luck everyone. At least now I can use my 80 gig ipod for something else than a paper weight. I must say though, Microsoft would have had a fix by now for this.
    Good night and good luck,
    Chief

  • HT4946 i locked my new ipod touch and cant it back open from the computer help.?:(

    i locked my new ipod touch and cant it back open from the computer help.?:

    First:
    - See:       
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with defect cables
    - Try another charging source
    - Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar
    If you get it to charge then:
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • I bought a new ipod touch today and it connects to my wifi automatically... But I forgot my wifi password for my new iPod touch and I don't know how to find it in my old iPod?

    I bought a new ipod touch today and it connects to my wifi automatically... But I forgot my wifi password for my new iPod touch and I don't know how to find it in my old iPod?

    You can usually find the wi-fi password on your router itself if you know the router's ID and password (not the wi-fi password).  You can log into your router by putting its address (usually 192.168.1.1) into your browser's address window. 

  • HT1449 i have bought a new iPod touch and when i went to sync my iTunes library most of the songs didn't come across they get a explanation mark at the side they are whole cds of music. but i didn't have this problem on my old ipod touch when i was using

    I have bought a new ipod touch and when i went to sync my music library on to it only a few songs went over, the ones that didnt had a ! next to them. I had no problem when using my last ipod touch but i was using a pc at the time not a mac though.

    Hi there,
    This usually meas that iTunes can't find the original files. I would recommend taking a look at the article below for some tips on locating that lost media.
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/ts1408
    -Griff W.

  • I have a new iPod Touch and one apple ID. I want to use My laptop aswell as my desktop computer for the one ipod, using the same apple ID. I have music on both computers and want to merge the two without losing any music or apps. How do I do this?

    I have a new iPod Touch and one apple ID. I want to use My laptop aswell as my desktop computer for the one ipod, using the same apple ID. I have music on both computers and want to merge the two without losing any music or apps. How do I do this?
    My iPod has music and apps from my apple ID that I downloaded to my iPod via iCloud and some apps that I got free from the store, straight onto my iPod, but my laptop has some music on it aswell, separate from my other library. I want to put the music from my laptop into my iTunes library which I want to use on both computers. Is it possible to do this?
    Thanks.

    - You can only sync an iPod to one iTunes library/computer. You can however, manually manage music and videos among different libraries.
    Go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions.
    - If y wnat to switch syncing libraries/computer see:
    go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    If all the synced media like music is in the iTunes library of the second computer it is very easy.

  • HT2731 my oldest daughter recently bought a new ipod touch and gave her old one to her brother.  I need to know how to unlink the old ipod from her account without losing all the music and games on it.  He would like to have his own account.

    My oldest daughter recently bought a new ipod touch and gave her old one to her brother.  How do I unlink his ipod from her account and set up his own without losing the music and apps already on it?

    Connect it to his iTunes library and set it up as a new device.  You should be prompted to Erase and Sync the iPod if his iTunes library is separate from hers.
    Or head to Settings -> General -> Reset -> Erase all Content and Settings.
    B-rock

  • Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

    Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected.  Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices.  After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected.  Just can't seem to get it to generate an IP.  Any solutions other than turning it on and off again?  Not a Merry Christmas morning.

    Ok, so, a couple of things:  Denisefromwaleska and I have the exact same size/type/color iPod.  Now wishing I'd bought the black one maybe...
    Second, Airport is an Express and I have a second one that I carry with me when I travel.  Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem.  Updated firmware on my travel router, still could not connect to the internet.  Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod. 
    Thanks again for all your help, hopefully I can get a solution in place soon,

  • An unknown error occurred -54 in itunes this happened after i'd bought new iPod touch and synced it to my iTunes can you not have two iPods on iTunes account??

    Please help i bought a new ipod touch and synced it to my itunes account so i had both ipod touch's on it and now i have an error flashing at me and i don't know what to do??

    == Error -54 ==
    From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Some of the old codes still apply to OSX although there is no formal list of OSX error codes.)
    First, try simply restarting your computer.
    iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814
    Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
    Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
    Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.

Maybe you are looking for

  • Function to return in case of non matching records

    Hi CREATE TABLE [dbo].[DeptMaster]( [DeptId] [int] NULL, [DeptName] [nvarchar](50) NULL ) ON [PRIMARY] Insert into DeptMaster values (1,'HeadOffice'), (2,'BranchOffice'), (3,'') CREATE FUNCTION [dbo].[GetDepartmentId] @DepartmentNameIn nvarchar(128)

  • Copy AP Invoice to AP credit memo got a discount per line automatically

    Dear All, Our customer is in SAP8.8 SQL2008 CA localization. When they copy AP Invoice to AP credit memo (service type), the 1st line always has a discount (no matter which GL I choose). No matter which user I user no matter which posting date I choo

  • Exporting for Web Streaming...

    Hello - what are the best specs to export a file for Web Streaming? My client gave me the specs of 640x320, and it's too stretched. Also, would it be in Sorenson? MPEG-4? Something else? Thanks so much!

  • Maintenance of conditions

    Hi All, TCodes MEKP and MEKR (menu path Logistics -> MM -> Purchasing ->Master Data -> Conditions -> Vendor Price Changes) do not have "plant" as a selection parameter. We often have one price for a vendor/material/plant combination and another price

  • Set NAT's Default Host based on client ID, not IP

    Hello, Is there a way to set the NAT's default host to a "Client ID" instead of an internal IP address? I need this because often my PC's IP change and I need to update it manually in the Airport, causing it to restart and breaking all internet in my