New iPod 80GB not working on older iHome

I just got a new 80GB iPod and when I went to put it on my iHome the iPod didn't do anything. Didn't try to charge or anything. The iHome works just fine with my old 15GB but not the new one. The iHome is about 2 years old.
Do the older iHomes not work with the new iPods?

There have been many reports about the iHome docks not working with the iPod Classic. Why not contact their customer support for a definitive answer?
http://www.ihomeaudio.com/contactUs.asp

Similar Messages

  • Help.. brand new Ipod 80gb not being recognised by Computer or itunes

    Replaced a ipod mini that was stolen from my house with a brand new 80gb ipod. Plugged it into the same computer that had been used successfully with the mini and the ipod will not be seen by either the computer or itunes. It will charge through the usb post no problem but when you plug it in it originally came up with the windows new hardware wizard, as apple have for some misguided reason stopped supplying CD's, the wizard can not find the correct driver, and fails to install. When Itunes is running nothing appears. I have been through the 5 R's, or should I say 4 r's as the fifth rely's on itunes recognizing the ipod before you can restore, countless time, so please unless you are sure don't ask me to click the hold button on and off yet again.
    Plugged the ipod into an old laptop with USB 1.0 ports and the ipod was recognized which would suggest it is my main comp's usb ports that are at fault, but as two previous ipod mini's worked without fault I find this hard to believe. I think if only I had the correct driver to install I could solve this problem easily. Can anyone send me the correct driver for an 80gb ipod.
    It hopefully goes without saying that I have downloaded the latest itunes software and gone through all the post's on the this site. I thought I'd cracked it with the UBSSORT file post but it was not to be....to tell you the truth if it's this complicated I'd rather send it back and buy a sony mp3 or even an ipod nano. At my wits end so please help Obi one, your my only hope

    Big Big thank you to Varun at Apple Service & Support e-mailed me the following article and after following the instructions, I'm up and running. Thank you ......
    Link: http://www.info.apple.com/kbnum/n305136
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date

  • New iPod Touch not working with G3 iMac

    I got a new iPod Touch (4 gig) for Christmas. Tried plugging it into my iMac Power PC G3, and I get an error message. ( error OxE000001). Is my iMac too old to work with the iPod touch?
    Also as a second issue, I have a wireless network, but I don't have it broadcasting it's name for security. When I turn on my lap top, if it doesn't automatically find the wifi network, I just type in the network name, and it pops up.
    Any way to do this with the iPod Touch? (Type in the network name, even though it's not broadcast)
    I'll also list this question on the WIFI section.

    Ken;
    I AM running with iTunes 9.0.2. in my slot loading G3 iMac. There is no special Hack.
    You tried to help me earlier, when my G3 just would not work after I upgraded Safari and iTunes. I ended going to the Genius bar, where they worked on it for hours to get it going again. They installed earlier versions of both programs.
    I was going to keep it that way, until I was given an iTouch for Christmas. The iMac just did not see it. I was resigned to updating my iTouch through my son's iBook.
    In a question I had about upgrading my wireless network, John Galt said his 500mhz G3 worked OK with the iTouch. Over two weeks I slowly installed what he had, (or close to it) I think Safari has a G3 version, that I may have missed when you were helping me.
    The last thing I upgraded was iTunes 9.0.2. After three or four tries, and plugging in the iTouch USB cable directly into the iMac, the iTouch was recognized! It seems to work fine over the past week or so.
    Some odd things I have to live with. When I plug in the iTouch, iPhoto will start and ask about downloading pictures from the iTouch. I have to manually start iTunes if it is not already on. It does not automatically start like it does with my iPod nano.
    Also I did not realize how slow this machine is, I thought down loading a CD through a La Cie DVD/CD player at 1.3x speed was fast. My son's iBook downloads a CD a 9 x speed! Oh well... slow but steady.....

  • New IPod touch not working on Play station / Speaker

    I'm having trouble with getting connection from my new ipod (slim) and my docking stations. My old one connects fine but new slim does not...any suggestions?

    That is the exact same problem i am having. Exactly on the spot. There is a major bug in this new version and others are having similar problems. I tried going back to the 7.6 version but that didn't work as my library data file was already written with 7.7 The only thing i can think of is wait till another version, as of right now i haven't been lucky in finding a solution. I am still working on it, though and will let ya know if i can solve it. So far i've tried all the solutions that helped in the past, and nothing
    it does work with my other ipod so, it seems that iphones and ipod touch are the ones effected at this point. Some people have said that it deleted their library, but that hasn't happened to me so i have no idea whats going on.

  • NEW IPOD NANO NOT WORKING, PLEASE HELP

    Hi Guys,
    I have the large IPOD (4 YEARS OLD) and bought a 2nd Ipod Nano that's smaller for the gym. I plugged it into my MAC BOOK PRO and it keeps saying it needs to be updated which I press "OK" and then it asks for my password and when I type it in, it keeps stating it's "incorrect"? What should I do, any help would be greatly appreciated!
    Thanks

    Vegas Superstar wrote:
    My plan was to fresh install OSX, install Carbon Copy Cloner and then clone the old drive by plugging it in with a reading device I have.
    Hi VS,
    What "reading device" are you using?
    As it started the macbook told me I was '+running on battery power+' and '+was I sure?+'. With full battery I said yes and continued.
    It is best to have the power adapter connected when running a long process like this which cannot be interrupted.
    The new internal drive was also making a repetitive noise - not loud or anything but certainly sounded like it was searching for something. As the whole thing was stuck and nothing was working I held down the power button.
    How long was it "stuck?"
    I tried again with the first disc but it wont even do anything anymore! I took out the new drive and put in the old one. Booted up. Connected the new drive to the reader with the idea of re-formatting it via disc utility.
    But now the brand new drive is not readable and is making the a few funny repetitive noises.
    Please help me someone - I'm very worried about this new drive now!!! Is is broken or corrupted or something???
    It sounds like there is something amiss with the new HD. If you have access to a different external enclosure, (even on a PC, just to see if the HD will function), you could try erasing/formatting it again. If not, I think it's time to contact the vendor about a return.

  • New iPod nano not working on iTunes

    Hi people. Total newbi so bear with me!
    I have an iPod Mini 4gb which i used with iTunes, everything worked fine. For my birthday I bought a new iPod nano. I tried clicking in the new nano but the computer wouldnt find it.
    I then tried to download the latest version of iTunes but i keep getting the same message
    "ERROR 1921 SERVICE IPOD SERVICE COULD NOT BE STOPPED. VERIFY THAT YOU HAVE SUFFICIENT PRIVILEGES TO STOP SYSTEM SERVICES"
    I deleted the old iTunes and tried to start afresh but I get the same error.
    Is it possible to run my old iPod mini and the new iPod nano and the same iTunes and does anybody know how to get around this error message??!?
    Thanks for reading!

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • New iPod still not working

    I went to the Apple store and they gave me a new iPod which worked for a little until it stopped connecting to iTunes. The message says "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
    I uninstalled iTunes but now when I try to install iTunes an error message comes up. What do I do now?

    Try to uninstall the iPod Updater and iTunes using the add/removal software, then download the latest iTunes and iPod updater from apple.com. Install both of them, then open ipod updater, wait and until you are asked to plug your iPod with the computer, then connect it and click Restore.

  • Brand new ipod touch not working like it should??

    I have a brand new ipod touch that i got last tuesday.and every downloaded app will stop working after i have had it for about a day..like it starts to load the app then just goes back to homescreen..all pre-installed apps work fine.
    but i have tryed restoring my ipod and it doesnt really fix it because all the apps stop working just like before..and i have also tryed deleting and re-installing the apps but is still doing the same thing.
    Is there a way to fix this or should i get it replaced??
    (i have a 2 year warrenty)

    Maybe your using too much Virtual Memory. Try holding the sleep/wake button and the home button until you see the silver apple.

  • My new Ipod touch not working!

    Received my brand new sealed Ipod touch 2g 8gb yesterday. Connected it at lunchtime all synced and was working perfectly. After work tried reconnecting it and nothing happened. Not appearing in itunes or even as a device on my computer. Did a reset of the unit hoping this would help. Not still won't connect and can't even use what was on it as it has been reset! Argh! Help please!

    have you tried to connect in recovery mode: _*http://support.apple.com/kb/HT1808*_ ?
    also, make sure *Apple Mobile Device Service* is installed and started: _*http://support.apple.com/kb/TS1567*_.
    JGG

  • IPod Touch not working with older cables

    I got a 5G iPod (video) a few years back. I also bought extra USB cables, and the universal dock to go with it. I just got an iPod Touch, but it doesn't want to sync with the old cables. iTunes doesn't even register that it is connected. Other posts on this forum seem to suggest that the older cables work just fine, so am I missing something?

    I had lots problems with 5G iPod Video (30Gb) cable connecting with Win XP PC but that same cable works fine with my new iMac/20". However both of my kids iPod nano (latest version) cables worked fine under Win XP and I used the Nano cable whenever I wanted to update the iPod video under Win XP.
    Now the old Video cable even works with my daughter's 16Gb Touch (on the iMac though)...go figure...
    This probably isn't relevent if you are connecting to your G4 though...

  • HELP NEEDED: new ipod touch not working

    i just got an ipod touch for christmas
    i previosly had and ipod nano and so allready had itunes with music and pictures on.
    i plugged the ipod into the usb on the back of my laptop.
    a camera pop up appeared which i closed.
    my ipod touch is fully charged now.
    itunes is not recognising and it is not anywhere on the menu.
    the ipod touch itself will only show what i have been told is a register screen (wire pointing towards itunes logo)
    on "my computer" the ipod is only appearing under scanners and cameras
    please help as i just recieved it

    Hello and Welcome to Apple Discussions. 
    You need to download and install the latest version of iTunes:
    http://www.apple.com/itunes/download/
    Ambie12, You should probably start a new thread for your issue if downloading iTunes 7.5 doesn't help.
    Coolmaxx, have a read of this article:
    http://docs.info.apple.com/article.html?artnum=93716
    mrtotes

  • Brand new ipod nano not working

    so i JUST received an ipod nano second generation today and i tried to hook it up to my computer and it seemed to work at first. and then my computer said that there was some sort of connection difficulty. so i unplugged it when it said it was ok to do so, but the screen still says "do not disconnect"
    i've tried to reconnect the ipod, turn it off, but nothing is working. the screen still says the same messgae. it looks like it's frozen or something. i dont know what to do
    HP VS17C   Windows XP  

    Take a look at the links below and see if they help any if you haven't already looked at them.
    iPod isn't responding--it appears to be frozen
    http://docs.info.apple.com/article.html?artnum=61705
    iPod Trouble Shooting
    http://docs.info.apple.com/article.html?artnum=32222

  • New Ipod nano not working with my Windows 2000

    I have just bought an ipod nano 8GB, and tried to install it. The latest itunes I can put on my computer is 7.3.2 as it is a Windows 2000 not an XP. Unfortunately the nano is saying it needs 7.4 and above. can anyone help please?

    I wish you would have asked or checked on the tech specifications for the Nano prior to purchase. These are the required tech specs, copied directly from the Nano page. I'm sorry there's nothing you can do.
    # PC with USB 2.0 port
    # Windows Vista or Windows XP Home or Professional with Service Pack 2 or later
    # iTunes 7.6 or later

  • My brand new Ipod is not working.  I need help!

    I cannot get help from Apple, so here goes.
    I purchased an Ipod for my daughter from this site for Christmas. We charged it and it seemed to be working, we downloaded the songs from Itunes on it. Then it appeared to have battery or charging issues. Now I can't even get it to turn on. This is getting very frustrating.

    To get it to restore you use an application that is installed from the CD that comes with the iPod... can you find this and run it with the iPod connected. If it is able to see the iPod just go for a full restore that should get your iPod back to the beginning and you will have to add the music again. If the software tells you no iPod is connected and you know it is maybe you will have to contact Apple or an Apple Store, as for being helpful I have approached them several times with ailing mac problems both inside and out of warranty and have found them very helpful and keen to resolve issue. I imagine at xmas they face a fairly large influx of calls from a variety of people with differing technical abilities making it harder to resolve issues and taking it longer to get through.. just keep trying, I I also have large format HP printers which are under a support contract with HP and now there is support that is a joke... any time of the year

  • New ipod touch not working

    I have tried charging it, nothing shows up showing it is charging. when I try to turn it on nothing happens. I plug it into my desktop and my laptops all with itunes 7.5 installed, nothing happens! help please!

    Try re-installing iTunes. That fixed mine when I first got it.

Maybe you are looking for