New iPod  Hi-Fi with issue

Hi,
I purchased a new Hi-Fi yesterday and haven't had any luck. It seems extremely easy to use but...
I plugged the hi-Fi into ac power and the status light functions accordingly. The remote as well as the volume buttons also cause the status light to display properly. However, when I take my Video iPod (with the latest sw) and dock it on top, it's never recognized as being connected. I'm not getting any sound whatsoever out of the Hi-Fi. The volume is up of course..The iPod also isn't being controlled by the remote while docked. Even if I select a song from the iPod itself, there's no audio either.
The iPod is fine and works with headphones or plugged into other devices that use the dock connector (MonsterMonster® iCarPlay™ Wireless - FM Transmitter for iPods with Dock Connection), everything is fine. I reset the iPod as well with no effect and tried as well with a nano we have (lastest sw as well) with no results.
I have also unplugged the Hi-Fi to reset it as well with no results.
Maybe it's dead...

Hi,
If your Nano does not work on your iPod HiFi as well, clearly that something wrong on the dock connection of the iPod HiFi, return it to the shop

Similar Messages

  • Another New IPod Touch Owner with Wi-fi Problems

    Another New IPod Touch Owner with Wi-fi Problems.
    I have been working at this for about 4 hours now with no success and I am getting pretty frustrated, so if it show up in my typing please ignore it. I just don't understand why these multi-million dollar companies can't write a manual or put up a web site that can actually help someone with a problem.
    Ok, venting aside.
    I am running a gateway computer.
    Operating System = XP
    Router = Linksys WRT54G
    I have two other computers that are working fine with the existing wireless net work and have been for some time.
    I'm pretty good with my computer but haven't touched my router since initial set-up and all that was done was a basic set up.
    My I-pod is searching for a network and I'm three feet away from it but it doesn't find it.
    I printed out my wireless setting. I presume SSID name equals the name box on the ipod-touch
    Security = WEP
    What seems to be kicking my A$$ is the password. The route setting have never been changed so I would pesume the password should be the default "admin" which I put in (JOIN) and get the "Could not find network" screen
    So, I have perused this message board trying to discover and answer to mine, and and apparently many others question with no definitive results.
    So I guess what I and everybody else needs is a step by step how to guide on how to discover the info needed and enter in what we need to make this work.
    Thanks in advance to anybody that can actually help with this issue. A step by step do this would be nice.

    Thank you Terpfen for replying, and please excuse my ill temper earlier. I've calmed down some now.
    Step: 1 followed step one previously, Main screen, settings, Wi-Fi. Also set power down to 5 min to give I-Pod plenty of time to find network.
    Wi-Fi Network Screen.
    Wi-Fi ON
    Choose a Network (searching indicator) symbol spinning.
    Other ...
    Ask to Join Networks ON
    At this point the I-pod does not find any networks available. The indicator just spins but never returns any results. I am 3 feet for my WRT54G router.
    Hence the easy connect isn't connecting.
    The next step. is to manually set-up the connection.
    Main screen, setting, Wi-Fi, Other.
    press "Other" which brings up two fields
    Name __________
    Security ___________
    First Question? Which Name are they looking for. when I went to my router 192.168.1.1 It has the name linksys. However, when I go to my Wireless Network setting it has the name * ???? * which is different than Linksys router.
    Now, since one of the goals here is file sharing I presume I should be using the Wireless Network settings name. (which I have tried.)
    Next is security, Wireless Network setting indicate setting for WEP Once this is selected you then back-up to the "Enter Network Setting Screen" and you now have a password line added.
    Now I have never set a password for the router so the password for the router is the default Password "admin" And I don't recall ever setting a password for my network setting. But, I only use about three different passwords and a cycled through them still with no success.
    So, I need some expert advise on how and where to find the info to input into the required field to work or what I need to reset in my router to make this work.
    Thanks again for anyone who has constructive input to resolve my and probably many other peoples issues with this problem.

  • Brand new Ipod touch G4 with sound only in one earbud

    I have a brand new Ipod touch G4 with sound only in one earbud.  I have tried different types of headphones, but get the same result.  If I jiggle the connector pin, I can get sound on both earbuds, but only on one side when the connector pin is push all the way in.
    I have an older Ipod g4 without this problem
    any suggestions?

    Try on your ipod going to Settings-General-Accessibility. Scroll down into Hearing and see that Mono Audio is off. Maybe that's the problem.

  • Has anyone tried syncing the new iPod Touch 4 with OS 10.4.11?

    I know the "official" Apple spec's state the new iPod Touch 4 are
    for it to sync with OS 10.5.8 and use iTunes 10 .... but has anyone been
    successful in using the new iPod Touch 4 with OS 10.4.11 and iTunes 9.2.1?

    Does iTunes see the iPod? If not
    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows
    You need iTunes 10.7 or later on the computer
    The iPod touch uses different drivers than the Nano

  • Does the new IPOD Nano connect with the bose docking stations?

    Does the new IPOD NANO connect with the Bose docking stations?

    hi
    Yes it does. just bought a Bose. But make sure you have no cover on your Nano as it will not connect!

  • IPOD stolen, can I sync new ipod or itouch with library

    My Ipod was recently stolen. Can I sync a new ipod or itouch with the itunes library I backed up for my original ipod?
    Thanks

    Hey there,
    Yes you can. Just go ahead and hook it up to your new computer and go through the registration process and sync away if the backed up music is already imported into your new library. Hope this helps.
    B-rock

  • Hi, new iPod shuffle comes with Apple older earphones or new earpods ?

    Hi, new iPod shuffle comes with Apple older earphones or new earpods ?

    Older design earbuds, not the EarPods.  However, the remote control buttons on the EarPods cord are compatible with the currernt 4th gen iPod shuffle, although its microphone does nothing for a shuffle.

  • Why is my new ipod Touch 5 with iOS 7.1 clock is slow by almost 3 minutes?

    Why is my new ipod Touch 5 with iOS 7.1 clock is slow by almost 3 minutes?

    Radiation, global warming maybe... Really don't know, the time should update when you connect to the internet. You could also try resetting and see if it corrects. Are you sure the clock your comparing with is set to the correct time? Good luck, Cheers.

  • Does anyone know if the new ipod nano come with a camera

    Does anyone know if the new ipod nano comes with a camera?

    The newest nano is the 7th generation. It does not have a camera. The 8th generation is the next one, for Apple to release whenever they want. We do not know when or what it will have.

  • New iPod nano, comes with a USB cable and CLIP? Whats it for?

    My new ipod 2gb nano comes with a usb cable and a little clip or stand type thing that the nano can sit in and at the bottom has a hole that the usb wire sort of fits through but it isn't made to sit on the desk, its more like a clip of something, any ideas what this is or how to use it?

    The extra piece is the adapter for the Universal Dock. The dock has a well in it and there's an adapter for each size of iPod that goes into it.

  • How do I get the new iPod to work with iTunes

    I recently purchased a new iPod--I think it's the "Shuffle," whichever one retails for $150. When I plugged it into my iMac, it said I needed to install iTunes 10 to run it. When I checked for updates, it said that iTunes 9.xyz (whatever came after the 9) was the latest version.
    How do I get this new iPod to work. As you can tell, I am not much of a gadget junkie, and I'm a bit of a technology incompetent, which is why I purchased the Mac to begin with. I have an iMac, have no idea what operating system I am using--whatever came with it when I purchased it in November, 2008.
    TIA!

    Okay, I just looked and I do have 10.411. How do I upgrade to get the new iPod to work, and how much does the new operating system cost?

  • Why won't my new iPod nano work with griffin itrip?

    I just receiveed a new ipod nano as part of the replacement programme, but it will not work with my griffin itrip or my old speakers even though the connection is the same - anyone know why?
    thanks

    I used an iTrip with my old Classic 160, but when I got my 6th gen nano, it wouldn't work either. My iTrip was old, and the connector had lost it's plastic bits, so I thought that might be the reason. I could still use my Logitech speaker dock, so I don't think they changed the connector.

  • Will the New Ipod Nano works with this accessorie?

    Hey guys
    i was wondering if the New iPod nano will work with the Belkin Tunebase for iPod nano ..
    http://catalog.belkin.com/IWCatProductPage.process?Product_Id=257293
    http://images.amazon.com/images/P/B000EEZ2R8.01-AIWHEFKG4HT6N.LZZZZZZZ.jpg
    does anyone knows something about??
    thank you

    It does not work..though it isn't mentioned anywhere. I called Belkin; they recommened another of their products. I'm not sure who I am more disappointed with...Apple for not mentioning that their second generation nano isn't fully compatable with all of the first generation accessories...or Belkin, who had a difficult time figuring out their accessories aren't compatable with the second generation nano.
    Either way, be very careful when you purchase anything for a second generation iPod nano. Or don't buy the second generation nano if you plan on using a lot of accessories.

  • Will the new ipod touch work with ipod touch 4 cases

    hi im new to this and im just wondering if the new ipod touch will work with an ipod 4 case

    There are no hardware differences, just color and price, at least as far as anyone has been able to determine, so any existing case for the 4th-generation iPod touch (the just-announced unit still being 4th-generation, really) should be fine.
    Regards.

  • New ipod need help with songs from old one NEED HELP!!!!

    I got a new ipod nano 3rd gen. but it wont let me take all of my old songs from my old ipod(nano 1st gen) and put them on my new one! I dont want to lose my songs so PLEASE HELP!!

    When I did that on my old ipod and it said doing so will delete all the songs on it and replace it with my library. When I did it on my new ipod it just put the songs that was already in that playlist back on the ipod, not the songs that i need from the old one.

Maybe you are looking for