New iPod Nano G3, Cannot Connect to Win2K any work arounds?

I just purchaed a replacement iPod Nano )G3) and identified that it is only compatible with Win XP or Vista. Is there a work-around download available on the internet to work with Win 2K?

http://forums.winamp.com/showthread.php?s=&threadid=277166
Be advised you will not be able to Restore or Update your Nano using Winamp, or buy or rent anything from the iTunes Store. Your best bet would be to update your OS.
Message was edited by: deggie

Similar Messages

  • New ipod nano will not connect to my win 7 computer

    I have new ipod nano. I connected via usb port. My computer does not recognize device. what do I do?

    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  • NEW IPOD NANO WILL NOT CONNECT CORRECTLY TO 2011 KIA SPORTAGE

    Have a new Ipod nano. when I connect it to 2011 Kia Sportage it does not display the song list correctly. Have cable that Kia sells and it worked with my old Nano but not not the new one. Same results with cable that came with new nano. Help please

    Alternatively, you can always use a double ended 3.5mm audio plug and just manipulate the playlist via the iPod and not the radio.

  • I bought a new iPod nano and cannot get the music synced

    I just purchased a new Ipod nano and registered it and upgraded the software. I cannot get the music library to sync.  My music is in the cloud. 
    any advice on what I am missing?

    Hey OBandPL,
    I would use the following article to run through the recommended syncing steps one more time:
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/HT1351
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • TS1538 new ipod nano doesn't connect to windows 8 pc - how do i fix it

    I have a new ipod nano and it doesn't connect as a device or into itunes on a windows 8 pc.  I have tried the Apple instruction and it doesn't seem to help.  Any suggestons?

    Try posting in the ipod Nano forum

  • New ipod touch 5 cannot connect to tv

    i had ipod touch 3 and used to connect to tv using the apple connector one end was 3o pin and the other end going into tv was three wires one for video, and two for sound left and right. when i bought a new ipod touch 5 i was advised by apple people to get an adapter one end into the new ipod 5 and the other 30 pin. i have tried that and i can hear sound but not video why is that can you help me?

    The Lightning to 30 pin adapter does not transmit video.
    You will need a Lightning to HDMI (Digital A/V) or Lightning to VGA adapter
    iOS: About Apple Digital AV Adapters

  • HT4235 I just bought a new Ipod Nano and cannot get it to sync with my computer. I downloaded the latest Itunes before I started but it doesn't sync. The diagnostic test says that my Ipod isn't detected. What can I check?

    I cant get my Nano to sync to my computer. It is new and and I downloaded the latest Itunes last week. I hit sync and it makes a sound within a second and then says it is done. What can I check?

    Hey OBandPL,
    I would use the following article to run through the recommended syncing steps one more time:
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/HT1351
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • I cant start my new ipod nano

    Hi there,
    I bought a new ipod nano and I connected it to my notebook,dell latitude D 600, I did download the songs into that, but I couldnt remove as it showed not to disconnect, after like couple of hours I accidently removed the USB port from my notebook now it doesnt show up any signs inspite of me trying out all restoring help I got on the website,I feel its frozen but I cant restore it as per the manual methods, can anyone help me how to put it on? it did show battery icon as soon as it got dc but when I put it back for recharging it doesnt showup anything!!

    Make a post in an iPod Nano forum. This is for iPod shuffle.

  • When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

    I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
    AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

    Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

  • HT5479 My brand new ipod nano is no longer connedting to my brand new jbl wireless speaker. It worked fine the first day and now either cannot find the apeaker or the connection "fails."  Any advice?

    I bought my dad a new ipod nano and a jbl wireless speaker from the same apple store. Everything worked perfectly with the bluetooth connectivity the first day. Then my dad accidentally hit the "forget this device" button when he was trying to turn the bluetooth off. Now the nano either does not recognize the device or it will recognize the device but not connect. I would appreciate any advice.

    Does it charge on a computer? Does it appear in iTunes?
    If so:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    Also see:
    - See:      
    iPod touch: Hardware troubleshooting
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.

  • New ipod nano (6th gen) cannot be identified

    New ipod nano 6th gen replacement for a broken one and when plugged in a message says "An ipod has been detected but cannot be identified properly". How do you connect a new iod to an old playlist?

    See here: iPod nano: Error message saying that iPod 'could not be identified properly'
    B-rock

  • I have a new ipod nano and I am trying to load music to it and cannot find my music from my itunes that was on my Mac

    I have a new ipod nano - im trying to find my old iTunes music as I had an iPod touch about 8 months ago and cannot find my iTunes music and it is not on my current computer that was connected to old iPod touch

    Your music will only be where you put it.
    It has always been very basic to always maintain a backup copy of your computer.  Everything should be there.

  • I have iTunes on my iPad. I have a new iPod nano. How do I connect iPod to iPad to download iTunes and music library?

    I have iTunes on my iPad. I have a new iPod nano. How do I connect iPod to iPad to download iTunes and music library?

    Hi Divine Inspiration,
    You wouldn't connect the iPod to the iPad for data transfers. Music is stored and shared either through a computer or iCloud.
    This article gives an overview of moving music and data off the iPad.
    iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
    http://support.apple.com/kb/ht1209
    and this article explains syncing to the iPod.
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/ht1351
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

  • Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.

    Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.  I have tried uninstalling & re-installing Itunes but this didnt help. 
    Does anyone have any ideas? 
    Thanks for your help.

    I think the problem is that the iPod got set to Manually manage music and videos.  It needs to be set up for automatic syncing again.  Just unchecking that Manually manage music and videos setting does not do it.
    In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen.  In the sidebar (along left side of screen), there are two headings (Settings and On My Device).  Under Settings, click on Music.  To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
    Check the box at the top for Sync Music.  That turns ON automatic syncing for music.  Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod).  Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below.  Then click Apply.

  • I got a new iPod nano 7th gen., but when I tried downloading a video from my iTunes library a message popped up that said: Some of the videos in your iTunes library cannot be copied to your iPod because they cannot be played on this iPod.

    I got a new iPod nano 7th gen, but when i tried downloading a video from my iTunes library a message popped up that said: Soem of the videos in your iTunes library were not copied to yor iPod because they cannot be played on this iPod. What should I do?

    I kept having a similar problem - 3 out of the 10 videos I had on iTunes wouldn't sync. They were in the right format and I KNEW they worked on my iPod because I'd RECORDED them on my iPod. I finally figured out what to do! Go to the movies in your iTunes library. Click on one that does not sync. Click on "Advanced" at the top of iTunes and choose "Create iPod or iPhone version". Once that's finished, be sure you delete the old version so you don't keep getting the error (or have 2 copies of the same video) and sync. This should eliminate the problem. At least it did for me!

Maybe you are looking for