New iPod nano not charging

My brand new iPod is not taking a charge. I have run down the initial charge it came with about half way. When I connect it to the computer, or to a car charger, or to a wall outlet with adapter, the charging icon appears. However, even after several hours, the battery icon shows only 1/2 full. I have reset it several times. Is there more I can do, or do I need to send it in for repair?
PC   Windows XP  

After disconnecting the iPod from a power source, does the battery indicator return to a full charge after a few minutes?
It's not very accurate and sometimes takes a while.
Also, see these.
iPod battery doesn't charge.
Beef up my iPod battery.
How to accurately determine your iPod battery life.
Can I make the meter more accurate?

Similar Messages

  • New Ipod Nano not being recognized by Computer

    It seems I am not the only one having this annoying issue. My new Ipod Nano (3rd Generation) will not show up at all in Itunes. I never get the setup assistant to show up either. I have tried different USB ports, shutting down and restarting the computer, reloading itunes, etc. What's next? I am new to the whole ipod thing so if I need to do something I don't know about, please let me know.

    Hi
    You're right, you're not the only person having this problem. If you don't mind though, could you just stick to bumping the other thread? I'll get you the link, one second.
    http://discussions.apple.com/thread.jspa?threadID=1307897&tstart=15
    Thanks!

  • New ipod nano not recognized by itunes

    hi,
    okay today i got a new ipod nano, i plugged it into the computer and the computer recognized it but itunes didn't. I tried troubleshoot and reinstalling itunes and nothing. My ipod says connected but thats it and it freezes when i reconnected to diffirent usb ports. what should i do? help!!!!!!!
    Message was edited by: ariz426

    I supposed you have downloaded and installed iTunes 7 on your PC.
    It can be either a problem of your PC or the iPod, let have a prove.
    Try to find any computer (of course with iTunes preinstalled), if your iPod showed up there, then it is a problem on your computer, read this
    http://docs.info.apple.com/article.html?artnum=93716
    If your iPod does not show on any computer, then bring it back to the shop

  • Ipod nano not charging or being recognized by windows

    have windows xp pro
    cannot get ipod nano to charge or be recognized by windows
    left it connected for the past couple hours
    had to get a 2.0 usb pci card, other things are connected and working in the new card, its connected directly to the card

    Ok go ahead and try and reset the ipod while it is plugged into the card you have for usb 2.0. You reset the ipod by moving the hold switch on top of the ipod a couple of times until it is white. Once you have done that go ahead and hold down the menu and the center select button for 6-10 seconds until you see the apple logo. After you see the apple logo let go of the buttons and see if the ipod is showing up.
    Another thing you could try is taking the ipod to another computer and see if it shows up on that computer.
    Also remove any other usb devices from the computer except the mouse and the keyboard.
    If you still have this problem type in on the support web site msconfig and try that. If none of these steps help you take the ipod to the nearest apple store, or contact technical support and have the ipod sent in for repair.

  • New iPod nano not working on iTunes

    Hi people. Total newbi so bear with me!
    I have an iPod Mini 4gb which i used with iTunes, everything worked fine. For my birthday I bought a new iPod nano. I tried clicking in the new nano but the computer wouldnt find it.
    I then tried to download the latest version of iTunes but i keep getting the same message
    "ERROR 1921 SERVICE IPOD SERVICE COULD NOT BE STOPPED. VERIFY THAT YOU HAVE SUFFICIENT PRIVILEGES TO STOP SYSTEM SERVICES"
    I deleted the old iTunes and tried to start afresh but I get the same error.
    Is it possible to run my old iPod mini and the new iPod nano and the same iTunes and does anybody know how to get around this error message??!?
    Thanks for reading!

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • IPod nano not charging on Windows XP

    My iPod nano won't charge at all, and I have Windows XP. After I plug my nano into my computer via USB, a white screen comes up on the nano that shows a "dead" iPod and the address for the Apple support website. Then the screen goes to the depleted battery icon, with the lightning bolt at the far left side of the battery sign(which isn't blinking). I've had my iPod plugged into my computer for over 4 hours, and nothing seems to be happening. Once in a while, the white screen with the dead iPod comes back up, but the battery still won't charge. If anyone could help me with this, I'd appreciate it! Thanks very much.

    Hi MsMayZ,
    I don´t want to sound negative, but that seems like a typical Windows XP problem.
    When I received my first Shuffle, it did not work on my XP machine, making me think that there´s a problem with the device. But then, I had the chance to setup a new PC from scratch (XP Pro, SP 2 etc.) and suddenly, the Shuffle worked like a charm. The same happened with my two Nanos.
    Windows XP obviously has some serious issues with USB on some machines or under some circumstances which are unfortunately nearly impossible to detect. Let me add, that all of a sudden, an USB scanner refused to work on one XP machine after updating it. With all the help I could get (hotline, Google, manufacturer support), there was no chance getting it back to work - nobody seems to know why...
    I know this sounds not very encouraging, but from my experience, if the Nano does not work, it´s most likely a scrambled XP installation
    (I am about to remove all USB stuff from the device manager and let XP reinstall it - but I am not sure if this will work...)
    kind regards
    Tom

  • NEW IPOD NANO NOT WORKING, PLEASE HELP

    Hi Guys,
    I have the large IPOD (4 YEARS OLD) and bought a 2nd Ipod Nano that's smaller for the gym. I plugged it into my MAC BOOK PRO and it keeps saying it needs to be updated which I press "OK" and then it asks for my password and when I type it in, it keeps stating it's "incorrect"? What should I do, any help would be greatly appreciated!
    Thanks

    Vegas Superstar wrote:
    My plan was to fresh install OSX, install Carbon Copy Cloner and then clone the old drive by plugging it in with a reading device I have.
    Hi VS,
    What "reading device" are you using?
    As it started the macbook told me I was '+running on battery power+' and '+was I sure?+'. With full battery I said yes and continued.
    It is best to have the power adapter connected when running a long process like this which cannot be interrupted.
    The new internal drive was also making a repetitive noise - not loud or anything but certainly sounded like it was searching for something. As the whole thing was stuck and nothing was working I held down the power button.
    How long was it "stuck?"
    I tried again with the first disc but it wont even do anything anymore! I took out the new drive and put in the old one. Booted up. Connected the new drive to the reader with the idea of re-formatting it via disc utility.
    But now the brand new drive is not readable and is making the a few funny repetitive noises.
    Please help me someone - I'm very worried about this new drive now!!! Is is broken or corrupted or something???
    It sounds like there is something amiss with the new HD. If you have access to a different external enclosure, (even on a PC, just to see if the HD will function), you could try erasing/formatting it again. If not, I think it's time to contact the vendor about a return.

  • Why is my brand new iPod nano not appearing in iTunes?

    I just connected the latest iPod nano model to my iMac, and it charges but does not appear in iTunes.  I can't set it up or sync music, etc.  I followed the troubleshooting procedure provided on the apple.support website. 
    Please help!

    Make sure the FM radio is stopped and Bluetooth is turned off.

  • New ipod nano not recognised

    ok, so just bought new ipod (7th generation) nano. All excited when it came, plugged it into and it says on my itunes that "an ipod has been detected but could not be identified properly, please disconnect then reconnect and try again" so obviously i did that. Didn't work. Tried all 3 of my other usb ports. Didn't work. Looked online and followed all the steps (restarting computer, updating windows, checking my usb ports, resetting ipod, and reinstalling itunes. none of this worked!! Really annoyed as I am wanting to use my new nano as my last one is literally dying! (hold button doesn't even work in my old one!)
    any help or advice would be greatly appreciated!

    Could be an issue with the new lighting cable as others have reported similar problems. Does it connect with another PC or Mac running iTunes?
    If nothing else, I would recommend returning the iPod for a replacement as soon as possible.
    B-rock

  • Why is my 8 month old Ipod Nano not charging/synching?

    My Ipod Nano is no longer charging with the USB cable in either my laptop or my apple charger. It started to sporadically charge/synch and is now not doing it at all. Everything else works with USB drive on the laptop and I have no problems charging my Ipad on the apple charger so the issue must be with the Ipod itself. I use my ipod every day for running. Is there anything I can do or am I going to have to trash an 8 month old Ipad?  I've tried resetting the Ipad and that makes no difference.

    Check the dock connector on the Nano and clean any dirt/debris/dust bunnies you might find. Clean it with a soft brush. While you are doing this get a magnifying glass and look at the pins. If you see rust/corrosion then sweat has damaged the connector.

  • New iPod nano not recognized by itunes, troubleshooting steps no help.  Ideas?

    Title pretty much says it all . . . have reinstalled S/W several times, followed troubleshootign steps, etc.  No joy.  Please help!

    Hello,
    The cord might be the case, but first, try these suggestions:
    Try putting your iPod into disk mode, then try connecting it to your computer again...
    <a href="How to put your iPod into disk mode</a>
    Do you have a wall charger? If so, then try connecting your iPod to that, and does it charge, or not?
    Have you checked this link out?:
    <a href="http://docs.info.apple.com/article.html?artnum=60941">iPod doesn't charge correctly
    Does your iPod appear in "My Computer"? If so...
    iPod shows up in Windows but not in iTunes
    If not...
    iPod missing in "My Computer" or in iTunes
    Post back on what happens when you try these things out. I hope this helps!
    ~~Kylene

  • New Ipod nano not working with my Windows 2000

    I have just bought an ipod nano 8GB, and tried to install it. The latest itunes I can put on my computer is 7.3.2 as it is a Windows 2000 not an XP. Unfortunately the nano is saying it needs 7.4 and above. can anyone help please?

    I wish you would have asked or checked on the tech specifications for the Nano prior to purchase. These are the required tech specs, copied directly from the Nano page. I'm sorry there's nothing you can do.
    # PC with USB 2.0 port
    # Windows Vista or Windows XP Home or Professional with Service Pack 2 or later
    # iTunes 7.6 or later

  • New IPOD nano not recognized by computer

    I have a brand new IPOD 3rd Generation. I have windows XP. When it is plugged into the port neither computer recognizes it. I stopped and restarted the service but that did not work either. Any suggestions?
    Thanks
    Jgalli

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Patrick

  • Brand new ipod nano not working

    so i JUST received an ipod nano second generation today and i tried to hook it up to my computer and it seemed to work at first. and then my computer said that there was some sort of connection difficulty. so i unplugged it when it said it was ok to do so, but the screen still says "do not disconnect"
    i've tried to reconnect the ipod, turn it off, but nothing is working. the screen still says the same messgae. it looks like it's frozen or something. i dont know what to do
    HP VS17C   Windows XP  

    Take a look at the links below and see if they help any if you haven't already looked at them.
    iPod isn't responding--it appears to be frozen
    http://docs.info.apple.com/article.html?artnum=61705
    iPod Trouble Shooting
    http://docs.info.apple.com/article.html?artnum=32222

  • Pink iPod Nano not charging

    My daughter's nano does not charge. It works fine when plugged into a wall outlet, but once removed, the screen goes out. Any advice?

    Visit a service center to have it checked. If still under warranty, request for replacement. Cheers!

Maybe you are looking for

  • Display invalid pattern name while calling the procedure inside the package

    Hi , I'am trying to call a package which is having procedure ,from JDBC in which one of the return type is Varray from the procedure.When i'am calling the procedure inside the package from java showing invalid name pattern name.Just i'am placing the

  • Nokia 6225 - DB errers

    Hello Friends, Nokia 6225 - DB erase �s We have an application running under Nokia 6225, when ever application produce �Application Error� or some inconsistence due to some problem with the network or abnormal exist etc., we are facing DB erase probl

  • Firefox do not work on a monitor connected via HP USB docking station

    Firefox 4 doesn't work on a monitor connected to a HP Docking Station USB 2.0 (AY052AA#AC3). The latest Firefox 3.6 (or is it 3.7) worked perfectly on that monitor (except for Adobe flash player). I usually have that monitor in portrait mode, but nei

  • Jerky playback of footage on a Tv

    I burned a movie in final cut to a dvd. However when i try to play it back on a dvd player it is very jerky, is there anything i should take into consideration? my footage was shot on a cannon rebel t5i and a go pro hero 2 both 1080p at 24frames per

  • Metropolitan Statistical Area

    Hi All, My client wants to store Metropolitan Statistical Area against Org Unit.  I could not find any standard infotype for storing this.  Can someone suggest me where on Org unit I can store it. Examples of MSA codes are as follows : 1000     AL Bi