New ipod, system won't recognize ipod

My sister already had an ipod on this computer. I got one over the weekend and put some music on it using another computer than my home computer. I came home and plugged my ipod in but the system won't recognize it. Every few tries it recognizes it and says its corrupt. Any info is appreciated. Thanks and happy holidays.

HI.... I just gt a new video iPod.... I already had
iTunes and music from the music store from a previous
iPod, so I just downloaded the latest iTunes
software... I downloaded the atest iPod updater
software too... So, I plug in my iPod, and the "DO
NOT DISCONNECT" screen comes up, and my iPod is
recognized in My Computer, but is not recognized in
iPod Updater OR in iTunes... has anyone else had this
problem??? if so, have you fixed it. if you did...
HOW?!?!?!?!
SOMEONE PLEASE HELP ME!!! IM UPSEETTTT AHHHHHH
Hi there
I have a possible solution.
Justre-install your iPod updater
This worked for me, and I hope it works for you too!
Sincerely
Matthijs

Similar Messages

  • After transferring music to new Mac, Mac won't recognize iPod

    I just recently transferred my music from a PC to a new Powerbook G4 using my iPod in disk mode. I erased everything on my iPod, then loaded it with music in disc mode to put on my new computer. But now, I need to erase the stuff on there in disc mode so I can put it back in the normal mode.
    Just when I thought I was figuring it out, my Mac won't recognize my iPod. Do I need to reformat it for a Mac since I was using it with a PC? Be gentle, I'm new to Macs and don't know the lingo or my way around very well yet.

    Exactly what steps did you follow?
    1. what do I do with original iTunes folder?
    It's on your old computer.
    What do you want to do with it?
    2. how do I get iTunes to read/ingest playlist and songs?
    If you copied the entire /Music/iTunes/ folder from old computer to /Music/ on new computer then you simply need to open iTunes.
    Since it is the exact same library, everything will be there as it was on old computer.

  • ITunes and iPod updater won't recognize iPod

    I'm running Windows XP and it shows the iPod is there but it won't show up in iTunes and iPod updater after 'initializing' for a good 5-10 minutes says either 'could not recognize the iPod' or if it does let me restore give the 'Firmware update failure. Diskwrite error.' I have the latest iTunes and iPod update and went through all the steps in the 'Windows recognizes iPod but iTunes does not' Troubleshooting help section. All these problems started when I tried to update with the new iPod updater software and got an error, everything worked fine before. I have also tried using a friends USB cable the problem is obviously in the Nano itself. Is there any way to safely format without using the iPod updater? or what should I try doing next?
    Also it seems like when the nano isn't plugged into a power source it drains the battery, with nothing showing on the screen because it always starts charging when I hook it up to the computer even though it was fully charge before.
    Thanks for any help.

    Hello,
    I too am having this exact same problem. My iPod nano was working perfectly until this "latest update" Since I installed that update my itunes and my ipod updater will NOT recognize my iPod. I am getting all the same error messages as you.
    I have done EVERYTHING recommeded in the support pages. Reinstall, uninstall, install, reboot I've done it all a hundred times. I have over 5 pages of support documents I printed up and I followed them to the T. I have 10 different USB ports including 3 2.0 USB ports. My windows recognizes the iPod instantly, but the updater will not.
    I 'm starting to think it's a problem with the update software.
    Please, if anybody has any advice other than "www.apple.com/support/ipod" please post something. I have had my Nano since October and never had a problem with it and I really, really miss it right now.
    Thanks
      Windows XP  
      Windows XP  

  • New battery, now won't recognize ipod on computer...

    so i've got this 4th gen. ipod (30gig) and i replaced that battery myself.
    everything went well.
    it works, it plays, it WAS connecting to computer (via it's firewire cable).
    but, all of a sudden, it stopped connecting to ANY computer.
    it charges when plugged into a firewire outlet (i get the charging battery icon on the ipod), but no computer will recognize it to transfer music...
    it plays with headphones. it plays in a bose dock, but no computers.
    i went thru the '5 steps', resored, reset, everything.
    any ideas?
    thanks for any help.

    Well I finally fixed my problem, I dropped itunes and have started using MediaMonkey http://www.mediamonkey.com/ which comes with ipod support that actually works(unlike my itunes).
    http://www.mediamonkey.com/device-plugins.htm

  • I got new speaker system and i plug ipod in and try to play music and it wont but it will charge

    i got new speaker system and i plug ipod in and try to play music and it wont but it will charge. How do i fix

    - Make sure that the iPod is fully seated in the dock.
    - Does the manufacturer of the dock say it will work with your specific model iPod touch and its iOS? Not all dock work with all models and iOSs. Users have reported that when the updated the iOS on their iPod and broke compatibility.

  • Please help!  My IPod touch won't recognize the digits I enter for my password and won't put a "dot" in the password squares.  It also speaks the numbers I enter, very, very fast!

    Please help!  My IPod touch won't recognize the digits I enter for my password and won't put a "dot" in the password squares.  It also speaks the numbers very, very fast.  Can anyone help?

    Sounds like some accessibility features have been turned on. See this article for instructions on turning them off.
    http://support.apple.com/kb/HT3577
    B-rock

  • Computer won't recognize ipod

    We had work done to our computer and they had to take everything off the computer and reload the operating system. My itunes were restored, but when I connect my ipod the computer won't recognize my ipod and the songs I recently downloaded from the itunes store won't synchronize. Any thoughts?

    I am having the same problem. I recently got a new iPod nano 3rd gen, connected it to iTunes and my computer and it was all well and good. I then connected it for a second time, all fine. But ever since then my computer says "one of the devices connected to this computer has malfunctioned and windows does not recognise it". My iPod works absolutuely fine apart from that. Any suggestions?

  • ITunes won't recognize iPod - Extreme frustration!

    So iTunes won't recognize my new IPod Video. It works fine with my kids' shuffle, mini and 4th gen but when I connect my new iPod I just get a window with: "iTunes cannot read the contents of the ipod "IPOD". Use the IPOD Software Updater Application to restore the IPOD to factory settings"
    I've been trying since Christmas to get this thing working. I've tried the five R's, I've tried every combination of everything suggested on the Apple site, (including posts here) I've tried stuff from other apple users sites. No joy. I just got off the phone with the help rep from Apple. He talked me through the MSCONFIG stuff, no joy still. He told me to go to depot.info.apple.com/ipod and fill out the forms and they'd send me a package to put my iPod in to send them so they could fix it. It's personalized so it'll take an extra 3 weeks to fix. Needless to say, I'm very frustrated and extremely disapointed.
    Merry Christmas.
    Windows XP

    Looks like you're another victim.
    http://discussions.apple.com/thread.jspa?messageID=1432706&#1432706

  • Itunes for mac won't recognize ipod but iTunes on parallels will

    Just upgraded itunes to 10.5 and purchased a new ipod classic (160gb). All my music is on my old macbook, but itunes won't recognize that the ipod is attached. Finder will, but iTunes won't. However, when I run iTunes in parallels desktop on the same mac, it recognizes the iPod and asks to sync. How do I get the mac itunes to recognize the ipod?

    Sorry for the late response. I realised my notifications are off. I've tried that. All my software is up to date, setting for wifi sync are all checked off. I spent 1 hour on the phone with Apple with no results. Most threads are about Windows PC. I run a a MacBook. Variables could be my Linksys router but i/ve played with the firewall settings and nothing. I have a range extender but all devices are using the same network. Any final ideas?

  • Mac & iTunes 10 won't recognize iPod

    I recently updated my iTunes to the new version (10 I believe) and now my computer (OS 10.5.8, MacBook) and my iTunes won't recognize my iPod. The USB is working as it charges, but the iPod doesn't show up on the desktop or in iTunes. I've restarted the iPod and still nothing... any ideas? Thanks in advance.

    Hi there! I'm on the same case. My ipod classic 160 GB (bought in 2007) have been working fine until I updated to MAC OS to 10.6 and the itunes 10. I read a lot of discussions here and it looks like the itunes 9 and 10 i guess, have problems with the classic ipods, specially with those bought on 2007.
    There's a lot of people with the same problem.
    The itunes says my ipod it's corrupted and the ipod needs to restore, also in the finder doesn't appear. It's the same within irip, senuti or xilisoft that doesn't recognize.
    At this moment I try a lot of things to fix the problem, but nothing works... and the disk utility says the disk couldn't be repaired.
    I need to format it, but before I need to back up my files.
    I will try Floola and also I will try Disk Warrior to back up my songs. (150GB of music!)
    So sad that Apple doesn't say a lot about this big problem.

  • Software won't recognize Ipod on installation

    I installed my original Ipod software and when it gets to the point in the installation and asks you to plug in the Ipod, I do and windows says "new hardware found iPOD" but the software doesn't recognize it. It doesn't give me the option to format all I can do is click the box that says plug in iPod later. If I do that and finish installing software it won't find iPod then either but windows still does.
    Thanks for your help

    Well I finally fixed my problem, I dropped itunes and have started using MediaMonkey http://www.mediamonkey.com/ which comes with ipod support that actually works(unlike my itunes).
    http://www.mediamonkey.com/device-plugins.htm

  • IPod Touch Won't Recognize USB Cables

    My 4th gen iPod Touch no longer recognizes my USB cables. They won't work through my computers and they won't work through a wall charger. My iPod charges fine through my JBL Sound Stage, it's just a problem with the cables. If I plug either cable into my iPod, nothing happens. No beeps, no messages, no charging screen, nothing.
    I think I can pinpoint the problem until shortly after I purchased a spare cable, but that may very well be a coincidence. I've been using a third party wall charger, so that could be an issue as well- but it has never been a problem until after I purchased the new cable (can cables "burn out"?). I'd reset my iPod, but I need a cable to do that. So far I've just been charging via my JBL Sound Stage and syncing over WiFi.

    If you have tried multiple computers and multiple USB sync cables, that definitely points to a hardware issue with your iPod Touch.  Have you check the dock connector port for any signs of damage or debris that could be blocking or preventing the connection?  Take a can of compressed air and trying blowing it out and using a Q-tip or similar to clean the contacts.
    You'll likely need to have the iPod serviced or replaced.  If still under warranty, take it into your local Apple store and see what they can do for you.
    B-rock

  • ITunes won't recognize iPod Nano (1GB, 1st generation)

    I have been having problems Sync'ing my iPod nano with iTunes, however, the more I read help articles and follow the steps, the worse the problem gets. (I'm on a PC using Windows XP)
    I've gotten to the point where I updated my iPod software in Disk mode (up until then it was being recognized only in Disk mode), but when iTunes failed to recognize it when not in Disk mode I preceded to restore my iPod to factory settings, as instructed in the help articles.
    Now, up until then, I still had music in my iPod, and I was being able to charge it and listen to my music even though I couldn't sync the iPod anymore. After restoring, I not only lost my music (which I was aware of), but it STILL did not fix my problem. So I started to get annoyed.
    I then noticed that my iPod was being recognized by My Computer, just not by iTunes, so I began to perform the steps indicated in the following article:
    http://docs.info.apple.com/article.html?artnum=93716
    I restarted my iPod service - no luck
    I removed iTunes - no luck
    I emptied my Temp directory and restarted...
    That's when iTunes stopped recognizing my iPod altogether, not even in Disk mode. Not only that, but it seems to have affected the iPod itself, since it won't turn off or exit Disk mode anymore. So now I'm scared of going though with any more steps on whichever "help" articles and making the problem even worse than it already is (if that's possible).
    The only other information I can provide is that windows is still recognizing my iPod, no problem, and when I connect my iPod, iTunes actually launches... but DOESN'T recognize a thing. So I ran a diagnostics using iTunes and here's what I got (iPod diagnostics):
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    INTEL_ D945GCL_
    iTunes 7.3.2.6
    iPodService 7.3.2.6 is currently running.
    iTunesHelper 7.3.2.6 is currently running.
    Current user is an administrator.
    The current local date and time is 2007-08-30 11:53:26.
    Connected Storage Devices:
    Unidade de disco, MAXTOR STM3160211AS, Bus Type ATA, Bus Address [0,0]
    Unidade de disco, MAXTOR STM3160211AS, Bus Type ATA, Bus Address [0,0]
    Unidade de disco, Apple iPod USB Device, Bus Type USB
    Universal Serial Bus Controllers:
    Standard Universal PCI to USB Host Controller. Device is working properly.
    Standard Universal PCI to USB Host Controller. Device is working properly.
    Standard Universal PCI to USB Host Controller. Device is working properly.
    Standard Universal PCI to USB Host Controller. Device is working properly.
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    No IEEE 1394 Host Controller found.
    Connected Device Information:
    IPOD (H:\), iPod nano running firmware version 1.3.1
    All green lights, and as you can see, according to iTunes, NO PROBLEM! Except that it won't recognize the iPod that the disgnistics says exists and reads... ?!?!?!
    If anyone could shed some light on my situation, i would be VERY greatful!

    My IPod Nano will charge when connected to my computer but it won't come up on My Computer or iTunes. So I can't update the songs. I've already tried reseting the iPod. Does anybody know what I can do to fix it.

  • ITunes won't recognize iPod touch since Snow Leopard

    I convinced my dad to get Snow Leopard (the low price helped), and he loaded it onto his macbook pro, but now his iPod touch won't mount – it charges from the USB port, but iTunes doesn't recognize it. We plugged in my iPhone to see if it would work, and it started iPhoto, but not iTunes. That shows pretty conclusively that the trouble is with iTunes software. We haven't tried reinstalling it because I'm worried he'll lose all of his many playlists and settings. Any suggestions?

    Hello JacobST,
    Have you tried resetting the iPod touch with it connected to the Mac? To do this, press and hold the Home and Sleep buttons together until the unit powers off. Then press and hold the Sleep button until the Apple logo appears.
    If not luck with that, work through the troubleshooting steps provided in this Apple support document. You can choose to skip the re-installation of iTunes until later, but do know that it will have no affect on the media or settings, because this information is stored elsewhere on his Mac.
    http://support.apple.com/kb/TS1591?viewlocale=en_US
    B-rock

  • Itunes won't recognize iPod after installing MediaMonkey..

    Hi,
    I recently switched from Itunes to MediaMonkey, and I'm very happy. But my girlfriend still uses iTunes. And now her iTunes won't recognize neither her or my iPod when I connect either of them. Windows and MediaMonkey recognizes them perfectly. iTunes just comes up with this error message:
    "The software necessary to communicate with iPod isn't correctly installed. Install iTunes again before installing iPod-software."
    I've tried uninstalling and re-installing iTunes a number of times. I even tried uninstalled MediaMonkey, but nothing works..
    PLEASE HELP ME, I'M GOING INSANE HERE =(

    Have you tried working through the steps in this article, in the order listed?
    http://support.apple.com/kb/TS1363?viewlocale=en_US

Maybe you are looking for

  • ATV2 sound loss from HDMI, Optical or both!

    Hi, Sometimes (and this is the rustrating bit), but not always the sound from my ATV2 will die. I have it connected to the TV via HDMI and also to a surround sound system via an optical cable. I've played around with the audio setting in the ATV menu

  • [SOLVED]oracle.xdo.parser.v2.XMLParseException: Unexpected EOF

    hi frs, i have created a custom report using XML Publisher. i hve used two parameters in the report. one required and other optional. when i give both parameters report is working fine. but when i give only required it ends with an error. problem is

  • Problem in Printing ABAP Report in EP using SAP Transaction IVIEW

    Dear All, A very gud evening, I am using SAP Transaction Iview to show the ABAP Reports, But I have a Problem... How to print this report??? Please solve this issue, I have measure requirement of it from client. Thanks in Advance..

  • Reg:Locking in Web Dynpro for JAVA.

    Hi All, When a user logged in the front end i am calling the lock function module(based on this locking mechanism is working) and when a user logged out i am calling the unlock function module(now the locked mechanism is getting unlocked). now my pro

  • Sqlldr date format

    Dear experts, I'm trying to load txt file into table via sqlldr. I'm receiving error "Rejected - Error on table TEST_TABLE, column PERIOD_START_TIME. ORA-01843: not a valid month The date format in flat txt file is MM:DD:YYYY; in the output table I w