New iPod Touch 2nd gen unable to connect to my network

Please let someone on here be able to help me... please. Dx
I just got my new iPod touch today, plugged it in, put some music on it, tried to connect to my network after it picked it up... and... it won't connect.
I've tried everything I can think of! It wasn't encrypted before, so I encrypted it. I tried using WPA, WEP, and WPA 2... NONE OF THEM WORK.
I've tried resetting, banging my head against the wall, resetting the network settings on my iPod... everything I can think of.
Is there a way to fix this? Please say yes.
Ugh.
One other thing, when I turn it on, go under the network and go under more info or whatever (the blue arrow) under DHCP no IP address shows up. Is that normal?
No, I haven't tried another network yet.
And I am entering the right password for the network.
Message was edited by: GraceTurner

Yes, Grace, there are fixes for this. Unlike some people who think there is a "bug", I think you can get this connected.
Router: Check your router for the following settings:
DHCP- On
MAC filtering - off
SSID - on
Encryption - set it to WPA or WPA2 (note, these are not turned on by default)
DNS - obtain from ISP automatically
On the iPod side:
Go to the network connection you have, tap on the blue arrow, tap on forget this network.
Go to Settings > General > Reset > Reset Network Settings and do that.
After your iPod restarts, go to WiFi and type in your Network name. Chose the encryption that matches what is setup on your Router, enter your password. (Note: if you choose WEP, choose 128 bit and enter the hexidecimal key when if prompts for a password)
If you have successfully logged in, you will have a check mark next to your network name. Tap on the blue arrow and look at your settings. You should have your Touch's IP address, subnet mask for the network, the router IP address, and the DNS address(es).

Similar Messages

  • Anyone got the new iPod touch 2nd gen to work with the fatman itube dock???

    Hi all,
    Recently for christmas I've bought a new iPod touch 2nd gen and it's awesome, everything is great about it - in my opinion; except for the fact that I tried to dock it on the fatman itube docking station and found it not to work. Before I used it I was aware that the 2nd gen is unable to charge on the dock however I didn't expect the speakers not to work too. All that happens is a message on the ipod comes up saying unable to charge with this accessory but doesn't put any sound output into the fatman, it just sits there blasting out it's own quiet internal speaker, and also strangely the remote DOES work too???
    I've read on the net that maybe resetting the ipod by holding the home+stand-by switch for 10 secs but this resets and does not fix the problem...
    There are many photos on the fatman website showing a ipod touch docked so it seems to be sold as working with it but who's to blame for this fault? Apple or fatman?? And does anybody know of a fix for it?
    Also I tried my mums ipod nano with the fatman - works fine, and my firmware on the ipod touch is nice and up to date with version 2.2 so I can't see anything else I can do. This was my christmas & birthday present and at the moment I'm quite annoyed that all I can do to it is stick a mini jack in the headphone socket - not ideal since there's no video output or remote control that way!!!
    Please give advice if there is any out there,
    Thanks,
    Mrghostie.

    This is an Answer for a Possible Solution. It worked for me and is still working. The issue I was having with my 64 bit vista, was Apple Mobile Device Service was not being installed, I dont know why. But I disabled any active running program through MSCONFIG, to allow a clean uninterrupted install of ITUNES 8.02. This allowed AMDS and drives from ITUNES to install. Hope this works for most of you.
    APPLE, please review your Support Methods. Re-installing doesnt help an issue that resulted from installing.

  • I have an iPod touch (2nd gen) unable to download iOS 4.3

    does this make it obsolete in trying to download new apps such as words with friends?

    Ipod touch 2nd gen can onl ygo to 4.2.1, which means that you can only use apps that are compatibel with ios 4.2.1 or lower.
    Some apps will not be compatible, some will

  • My new iPod Touch (4th gen) Won't Connect To My Home Wireless Network

    Hi Out There,
    I just recieved my new iPod Touch yesterday, inputed my SSID (Network Name), security type WPA2 and password key and It won't connect. Can anyone tell me if I have to do anything else like fill in all the other fields like IP address, mac address, subnet mask, default gateway or anything else like that or should it have connected with the info i provide as I feel this is the sufficient enough information for it to connect but as far as those other fields that I've mentioned does it auto-fill in those other fields when after it connects? Cannot get on.
    Thanks for your responses

    Finally figured it out and Apple doesn't even mention this in their article. I did what some other guy did. I took the Touch's physical address or (Mac address as they often refer to it and put the mac address of the Touch in my router's mac address filter list and "Bang" the internet came right on. Problem solved.
    null

  • WindowsXP shuts down when iPod Touch 2nd gen 8gb is connected

    Everything was operating fine for the first day I was using my new iPod Touch. on the second day, I think I might have disconnected the iPod too early? The iPod itself is currently operating normally, however, every time I connect it to my PC/iTunes, the PC shuts down, then goes to the HP blue screen- the one that gives the "Esc, F1 and F8" options.
    I restart and Windows says it has recovered from a serious error and wants to send the report.
    PC is ok until connection w/Ipod.

    Send the report and then wait while XP connects and tells you what the error is then you can "fix" it.
    You can also check Event Viewer to find out the error. I'm guessing you messed up Apple Mobile Device Support and may have done something to the Windows usb drivers but only the error report can tell you for sure.
    It might have nothing to do with your iPod or it might have everything to do with it but we can't help until we know what it is.
    As for disconnecting iPods, wait till iTunes it says OK to disconnect and then use that arrow icon to do it. That will avoid all sorts of problems in the future.
    If you want to end the sync early use the slider on the iPod (the one that reads cancel sync) and then use the disconnect arrow icon when you get the OK form iTunes.

  • TS1398 My ipod touch 2nd gen won't connect to the internet :(

    Whenever i try connecting, i put in the password and it says that it is unable to connect. I've tried turning both the ipod and the wifi off and back on again, I've reset my connection settings, I've double checked the password, I've done verything short of taking it to an Apple store and getting them to look at it. My brother bought this new gaming computer, and it was taking up a lot of the band width, making the internet really really slow. We also recently switched internet, from BT to Virgin, although everything was working fine until my brother got his computer. The other day, my ipod came up with a message saying that it couldn't connect to the internet, when it's been working fine five inutes earlier. This sometimes happened with our old internet, so I just did what I used to, and made my ipod forget our internet, and re-entered the password. This used to work, but this time, it just said that it was unable to connect. It's done this ever time I've put in the password since (about ten times a day -_-), een when there's no other electronic devices on, just my ipod and the router. All the other computers, laptops, and my btoyhers phone and ipod 4th gen are connecting fine, but my ipod and blackberry just won'connect. I've tried everythin I can think of, please help!

    You can try:
    - reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off an then backon your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • IPod touch 2nd gen won't connect to WiFi

    I just bought iPod touch 16GB 2nd gen and I'm having trouble with using some WiFi networks. I can use unsecured networks, but I am unable to use ANY protected networks. Whenever I try, it asks me for the password, I enter it and then it gives me 'unable to connect' error. I try the same thing with my laptop and it works like a charm. I checked support part of apple.com website but I couldn't find any useful information. Anyone knows a solution for this? Should I contact apple?

    My 2nd Gen iPod Touch would not connect to our guest WEP network at work. I run WPA at home and it works fine. As an experiment, I switched home back to WEP (128 bit) and it connected fine. HOWEVER, this was when I configured the router to use the hex key in slot 1. I could never connect when I configured it to use slots 2, 3, or 4. Rumor has it that some folks choose the key in slots 2,3, or 4 for some misguided reason of thinking that this is more secure than using slot 1. In reality, all WEP is insecure (but maybe better than nothing). Check which slot your router is using for the key. Still the Touch should work regardless of WEP slot used. Those at work with 1st gen Touch's have no problem while those with 2nd gen simply do not work on the WEP network (despite both set of users being on the 2.2 iPod s/w version). Hope this helps and I hope Apple has a fix. Otherwise I have to go do battle with corporate IT.

  • Ipod touch 2nd gen will not connect to my wifi giving me incorrect password

    Friday when i went to school when i came back and i turned wifi on it asked for my password and it told me incorrect password even though i am 100% sure it is correct. I went to my dads house over the weekend and used wifi there, and when i came back it would keep telling me that i had the incorrect password. My brother also has a 2nd gen itouch with ios 4.1 and same as me and his will connect just fine. I have tried several things and none seem to work. I have not tried updating my ipod or restoring it for several reasons. Does anyone have a fix?

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Ipod touch 2nd gen won't connect to wifi/internet

    I have an Ipod gen 2 and I recently stopped using it for about a month. I turned it back on to find NO way to get it to connect to the wifi. I have restarted my device several times as well as my router/modem, and I have restored network settings. It says that it is connected to wifi like normal, but when i go into my apps it says there is no internet connection. I have surfed around trying to find a solution but nothing is working. Please help (and please do not tell me to go to an Apple store to get it fixed).

    Does the iPod connect to other networks?
    Do other devices now connect to the network?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My ipod touch 2nd gen wont stay connected to wi-fi what can i do ?

    As title says my ipod doesnt stay connected, it will disconnect from it so i would have to go to settings and choose the wifi i want and i would have to repeat this process over and over. Also when i use safari it will happen a few times but then it would stop so me using safari somehow makes my ipod stay connected to wifi.
    (sorry if some things i say dont make sense or if i didnt type a certain word right my english is kinda bad).

    Start with a system reset.  It's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the reset doesn't help, go here for heavy-duty assistance.
    Post back with results.

  • TS1369 My brand new iPod touch 5th gen is not connecting to my pc or itunes

    I just got this it ouch yesterday. Apple keeps asking me to enter my password for my apple I'd I changed the email along time ago. Well I plugged it into my computer and nothing It won't charge or even show up. I tried looking into device manager the was no apple mobile device there I also tried uninstalling iTunes and reinstalled nothing still. Is it something wrong with my device I hat got it yesterday.

    See:
    iOS: Device not recognized in iTunes for Windows
    Start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Next see if this helps determine cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if you have an iPod or computer problem

  • I am moving my iTunes to a new laptop (from XP to 7). I can sync my iPod Classic but my iPod Touch 2nd Gen freezes.

    Hi,
    I have an old laptop running WinXP Home SP3 with iTunes 10.2x installed. I sync my old iPod Classic120GB and a newer iPod Touch 2nd Gen 8GB. I recently bought a new laptop with Windows 7 Pro. I am moving everything to the new one. I did not have a problem with the old iPod. But when I tried to sync the Touch it just freezes while trying to backup the existing contents. I have read a few support docs and have tried some of them where I have to tweak some of Window's Admin tools. I have also uninstallled and installed iTunes. There are so many things to try in the troubleshooting steps that I can't really figure out which is which. I also can't backup the contents of my current iPod Touch by attaching the device and right-clicking on it. The Backup context menu just isn't there.
    I currently have iTunes v10.3x and I need some "serious" help. :-) I did the Run Diagnostic with the device attached. I looked at the report and saw something that might be the cause. I am running iTunes not as the administrator. But if I try to run it as an admin, the Library is now different and I'm just "scared" to screw things up some more.
    Thank you.
    Horace
    P.S. Should I send the diagnostic report? Is it safe? If not what info should I exclude? Thanks.

    " When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
    Correct.
    " How can I get that music to show up in my library now on my new computer?  "
    Copy it from your old computer or your backup copy of your old computer.
    The sync is one way - computer to ipod.

  • New iPod Touch 2nd Generation not recognized in iTunes OSX 10.4.11

    Hi anyone,
    I have problem that my new iPod Touch 2nd Gen, it won't recognized in iTunes. iTunes already updated to 8.02. My macbook OS is OSX 10.4.11. All software updated.
    if i tried with different machines with Leopard installed, it's recognized.
    Does anyone have same problem with me ? What should i do to overcome this issue ?
    Please, do not suggest me migrating to Leopard
    Thank you in advance.

    Hello and Welcome to Apple Discussions. 
    You may need to restart the AMDS. Have a read of this article:
    http://support.apple.com/kb/TS2050
    Let us know how you get on
    Merry Christmas
    mrtotes

  • Ipod touch 2nd gen, with os 2.1.1.

    I just opened an brand new iPod touch 2nd gen, with os 2.1.1. It had been siiting in a box for a couple of years without being used.
    The iTune tried to updated it to os 4.2, but failed.
    I guess I need to upgrade to some odler os first like 2.2, then 3, and etc.
    Where can I find them?
    Since this 2nd gen iPod, I kindof expect it should be able to be upgraded for free to 4.2 or later.
    Where can I find those versions of OS?
    Thanks,
    James

    You can only go directly to iOS 4.2.1. Just how did the update to iOS 4.2.1 "fail"?

  • New iPod Touch 4th gen. cannot connect to home wi-fi network

    When I launch wi-fi on my new iPod Touch 4th gen. my home network's name is displayed, but after entering my password the iPod is unable to connect - the wheel to the left of the network name just keeps spinning.   The network still functions properly for all my other devices (MacBook, 2nd gen. iPod Touch, wireless printer and my wife's PC) and the new iPod Touch did connect to the network in the Apple Store when I visited yesterday.   I know the password I enetered for my home network is correct because I've checked it in my keychain, and also the iPod did not inform me that it was the wrong password for that network - as it does if I enter another password.
    I have followed the advice given to others - unplugging the Time Capsule and leaving it for 5 minutes, checking that all my software and firmware is up to date, 'forgetting' the network on my new iPod then searching for it again, and have completely restored the iPod - but it still cannot connect to my network.   If my network is functioning properly, and my new iPod was capable of joining the Apple Store's network yesterday, and I am sure that I am entering the correct password, it seems to me that my problem must be due to some network setting that is refusing to allow a new device to connect.   I can't find where that setting might be - can anyone advise?

    depending on what router but hopefully all routers came to this default address....
    192.168.1.1/Wireless_MAC.asp
    from
    >Setup of the Basic Setup you goto
    >Wireless
    >WirelessMacFilter
    also had an idea when i wanna make sure im typing the right one, i would do is tap each letter/# by 1, as in,
    (e.q.)
    here's my ipod 4 and my ipod 2, the pswd is 123456
    ipod 4, i press 1
    ipod 2, i press 1
    ipod 4, i press 2
    ipod 2, i press 2
    and so on till i reach both of them to 6 (1by1) to make sure i get it in there right. saw this on another wall it might depends on what channel your using, but i dont rly think that matters bc i have mine on auto and nvr had a problem.
    i would do this even thou it may sound crazy to others....if i were you this is what i would do
    on your ipod 2Gen
    >Safari
    >address to 192.168.1.1/WL_WPATable.asp
    -(wireless security settings for passcode)
    >tap the box for the password, whatever ur security is i would copy
    -IF WEP
    -copy phrase key and Key 1
    -IF WPA
    -copy phrase key
    >open Notepad
    >under iCloud account Notepad
    >Paste the Key
    >either on your pc/mac or your 2nd Gen, go back to
    >192.168.1.1/WL_WPATable.asp
    >change your Security Mode to Disable
    >goto your 4 Gen iPod Touch
    >goto settings and connect to it, if pswd is still in it then tap forget this network and reconnect to it
    -once connected and got IP adresses
    >goto Notpad under iCloud
    -you should have obtained your recent icloud msgs included the key you pasted
    -once obtained
    >gobk to pc/mac or ipod 2nd gen and re enabled the security and re-paste the key in
    -once router adjusted try to connect to it
    >1st do your 2nd gen and forget this network reconnect to it and repaste the key
    >2nd goto ur 4rth gen from your notes, highlight the key in ur notpad and tap copy and forget this network reconnect to it and paste the key.
    this should work bc i did it myself when i couldnt get connected bc thats almost the same steps i did.
    somtimes i put my name up on here. remeber these names we put as our nickname doesnt mean its our real name or anything like that,
    ~Anthony

Maybe you are looking for

  • IPhone 4 not recognized by iTunes after update to iOS7

    Hey guys, so here is the thing. Yesterday, after two day struggle I finaly updated my iphone 4 to ios 7. Everything is pretty cool, i like it, except one thing, it doesnt ***** show in itunes anymore. Well during the update it crushed and got stuck t

  • PDF not attaching to Outlook using Adobe Reader

    When clicking the Mail icon on the tool bar in adobe reader to attach the PDF to an email, adobe reader freezes and the document does not attach. It does work if Outlook 2013 is closed but if Outlook 2013 is open adobe reader just freezes for a minut

  • HT1459 slide bar doesnt work its like screen is locked

    slide bar doesnt work its like screen is locked its old a second generation

  • DnD Linux Nautilus 2.12.2

    I have some dnd code and was able to drag a file from Nautilus and get a String DataFlavor. There is no more data flavor reported with the new version of Nautilus. DropTargetDropEvent.getCurrentDataFlavors() returns nothing. If I drag something in fr

  • Multiple Session Workflow in DAC

    Hi Is it possible to run a workflow which has two sessions arranged parallely in DAC? I was told that DAC can run workflows with only one session.