New ipod touch 8gb will not charge
I bought my son IPod Touch for Christmas and now the only place it will charge is USB on lap top. It will not charge on our IHome or wall charger?
Try here:
iOS: Not responding or does not turn on
Apple will exchange it for a refurbished one for this price.
Apple - Support - iPod - Repair pricing
Similar Messages
-
Brand New iPod Touch 4G will not charge, or turn on
Hello.
I have a brand new iPod Touch 4G, and when I plug it into my computer, nothing happens. My computer for some reason is not reading this iPod Touch;
I have no other way to charge it.
No damage has been done to the product from my observation.
I have tried to restore it, reset it, and other things like that, but iTunes still isn't picking it up, as well as my computer..
I am on a Windows 7 Starter Notebook, with 3 USB ports (that probably are not high-powered), and for some reason it just doesn't want to charge.
I'm going to take it to school with me later to see if it will charge, but in the mean time, do you guys have anything that could possibly get my computer to start reading this iDevice?
thanks,
MattI have tried a different machine, and it is not my computer.
I have plugged a different iPod into this charger and it charges just fine.
So, it's the iPod its self.
I read an article somewhere and it said that
If your iPod is formatted to work with Macintosh, windows will not read it.
So, I'm thinking my iPod is formatted for Macintosh, (I cannot format it for windows), because it is completely dead, and it won't turn on.
So, should I try a wall charger as my last resort to try and get it to turn on?!
Thanks,
Matt -
it worked yesterday but not today and it is only a new ipod touch, it will not even be recognised on my itunes but yet it can charge off my computer. need help!
iOS: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows -
My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have a new iPod touch that will not turn on, nor will it connect to iTunes. Any suggestions?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My two month old iPod touch 4 will not charge past 98% after updating to 4.3.2
My two month old iPod touch 4 will not charge past 98% after updating to 4.3.2
- Are you sure you have a 2G iPod and not a 1G? Yucan can itell the difference here by the shape of the black antenna cover on the back of the iPOd.
Identifying iPod models
- What version of iTunes is installed opn the computer? -
Brand new ipod Touch (8GB) does not work with DHCP
I have a brand new iPod Touch (8GB) that will not work using DHCP. No matter what I do (reset router, reset ipod) the DHCP still doesn't work. I can manually setup an IP/Gateway/netmask/etc. and it works but I really need the DHCP to work if at all possible. I'm using a Linksys WRT54G. I was able to use an old Linksys wireless router and the touch gets an IP, etc. with no problems but I can not get my Touch to work with the WRT54G. Any ideas?
its possible to have a bad power supply that has too much AC ripple on the output which can make the screen do weird things
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
Truck stereo will play iPod touch be will not charge it's battery
My truck stereo will play the gen. 4 touch 32 GB, but will not charge it's battery. It did play and charge the battery for the nano 8GB with no problems for several years previously before switching it out with the iPod touch last week. What gives?
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Have you contacted/went to the car system's support site? -
BRAND NEW iPod Touch 2g will not power up
I just received a new iPod Touch 2g via FedEx today, and it won't power up at all. I've tried connecting it to my PC (Vista 32-bit) and the screen remains completely blank. I've tried doing the hard reset (holding the home and power buttons down for 10 sec.) and the screen also just stays blank.
This is the first time I can remember a piece of hardware being DOA...is this merely a glitch? Is there anything else I can try to fix this?I have had my iPod Touch 2g for a few weeks and have not used it a huge amount yet. I was very upset to find that after placing it in it's new Krusell case this evening and trying to turn it on (wake from sleep) a few hours later, it was completely dead. Dodo like.
Pressing the power button or the wake up button did nothing. I eventually found this thread and tried the power and wake up button together for 10 seconds. This seemed to work and it now appear to be fine.
A bit unnerving though, as I am working hard to get all my apps and data together so that I can use it as my PDA going forward. I need to move away from the old Sony Clie that has served me so well for about six years. It needs charging too often and I know the Palm platform is undeveloped.
I hope the iPod Touch doesn't let me know. Gave me a fright.
Hope you get yours going again... -
My iPod touch 5 will not charge, how can i fix it?
I got an iPod touch 5 in 2012. i have bought 4 and they worked for a few weeks then didnt work. The most recent cable i had will not charge unless held in a certain way. However now the iPod wont turn on at all what should i do? How can i fix it?
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Ipod touch that will not charge or sync
My daughter's ipod touch, just over one year old, will not charge or sync with any computer. We have tried several cables and computers with no luck. Any suggestions would be greatly appreciated.
- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Inspect the dock connector for bend or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar -
Have a brand new ipod touch and the screen is completely unresponsive. I cannot swipe the screen to configure it at all. I have pressed the home button and on/off button to reset it but it does not have any effect. Please could someone help.
- Restore the iPod from backup
- If still problem restore to factory settings/new iPod
- Last, male an appointment at the Genius Bar of an Apple store. you have a hardware problem. -
My iPod touch 3g will not charge nor will it connect to the computer.
It won't charge at all. I have no idea how it's still on but for now it is even though it's been saying the battery is less the 20%. It's not the usb adapter/cable, I've tried many. My laptop nor desktop will even acknowledge it at all. I've done resets numerous times and still nothing. I don't know if this means the battery needs to be replaced or not because like I said the iPod is still on after days of not being able to charge.Any help would be greatly appreciated!
I forgot to mention the iPod will play on my dock but not charge. I took it in today and it's no longer under warranty so they only offered to take it and give me 10% off a new one.
Thanks anyway! -
My iPod Touch 4g will not charge or sync
I have plugged my iPod into 2 different computers (one mac, one PC) using 2 different Apple iPod cords and I cannot get the iPod to charge. The computer does not recognize the iPod as being plugged in, so I cannot sync either. Basically nothing happens, so I'm worried something is wrong with the dock connector on the iPod! Any suggestions?
- First see if a reset will allow iTunes to see the iPod so you can restore the iPod.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next see if recovery mode will allow a restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Last try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- After that, an appointment at the Genius Bar of an Apple store is in order. -
So today I try to reset my Ipod. But it doesnt work!!! It will turn on for about 5 seconds then shut down and the spinning circle will appear. I tried resetting, but it didnt work. someone please help me before I break this thing!!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
How do I connect an external microphone to a Macbook Pro with Retina display ?
How do I connect an external microphone to a Macbook Pro with Retina display ? Alternatively how do I connect an audio input at a level that would normally have gone into a 'line input' socket ?
-
am not able to open canon xf 305 mxf in premiere cs6 but opening in cs5. I almost completed my project in cs6 and got this 3 gb footage just now.....help me please
-
Why is menu size so much larger than the files?
I am somewhat perplexed - I'm making a single-layer dvd and have a simple single screen theme (no animation) - it has one drop zone. The movie has 28 chapters so there are five of them, but so far I've added only one montage of photos to each menu pa
-
Problem in using 'Path Variable' in Linked resources in Eclipse
Hi All Currently we are working on a J2EE project on which we have established the split-development environment. In this environment we have few UI web sub-projects. These projects are bundled as a one UI project at the time of deploying the applica
-
How to use costum scroll localy
Hello to all. I have question that i was trying to solve for an week but still without effect. I want to ask how can i import scroll artwork for one flex application but to use it only in one canvas not in the whole application. I want to have the de