New Ipod touch is linked to laptop - laptop Itunes is open - Ipod has wifi - ipod says 'loading' when I go to itunes but that its it -thats all that happens - it wont connect to itunes or app store. I have windows 7 and latest version of itunes.
What I do to get this new ipod touch to open or syn with itunes and get some music in the device?
how long have you had your ipod? mine did the same but after a while you need to get a new one because of the battery...
Similar Messages
-
My ipod touch wont connect to my already existing itunes, it doesnt even show that there is a device hooked up to it! i have windows 7 and I just dont know what to do
Start here:
iOS: Device not recognized in iTunes for Windows -
Suggestions Re: I'm running OSX 10.9.2, when my system updated it required my Apple ID... When I provided it, it said that AppleID hadn't been used at the App Store... so now I'm locked out of my system... what do I do??
First, there are no PPC Macs that can run Snow Leopard or later. Did you buy your iMac used? Where did you get Mavericks in the first place? If it was installed by the seller, then you are not licesnsed to use his/her copy.
Do you know exactly what iMac model you have? If it's a post 2010 model you can do the following:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. You may then go to the App Store to download Mavericks using your Apple ID.
If you have a 2010 model you may require a special firmware upgrade before you can do the above: Computers that can be upgraded to use OS X Internet Recovery.
If you have an earlier iMac then you must get Snow Leopard 10.6.8 installed by installing a version of Snow Leopard either included on the software restore discs or:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply. -
When trying to download from the app store I keep getting an error message saying "this version of OSX 10.10 cannot be installed on this computer"; however, when checking the requirements I have them all.
Specs
Macbook Pro 15 inch
OS X 10.7.5
4GB of memory
>120GB of storage availableMacBook Pro (Mid/Late 2007 or newer) is required. You've not indicated which one you have. If yours is one of these, then http://www.apple.com/support/mac/app-store/contact/
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2 -
Apple app store should have option to download older versions.
I have experienced these many times that newer application does not work and we have to wait for bug fix release and we do not have choice to come back on older version.
Benefits of this provision
1. User can download stable version if one found some critical bug.
2. Reduce Older iOS compatibility issues.
3. Reduce Older iPhone compatibility issues.
It hurts when we purchase apps and these do not work for any problem. Apple Inc. should co-ordinate to developers and make provisions for downword compatibility and choice to have any version of application.
Bhavik Patel,
ERP Consultant.
India +91 9422763036OK.
We are all iphone users just like you.
You are not addressing Apple here. -
This happens both with hyperlinks provided in emails, and also with saved shortcuts on my desktop. It happens with all of them.
Hi,
Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
Click the Microsoft Office Button, and then click Excel Options.
Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
check box in the General area.
Click OK.
If the problem cannot resolve, the Run as administrator may selected.
Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
Right-click EXCEL.EXE > Properties >
Compatibility tab.
Under Privilege Level, uncheck Run this program as an administrator
check box.
Best regards.
William Zhou
TechNet Community Support -
Have BOTH .m4a and .m4p versions of same purchased songs after re-import
Hello,
I recently had to reconstruct my iTunes library (new machine, new installation) and so I did an "Add to Library" of my library folder into an empty iTunes library. After import, I've discovered that for about 215 songs which I've purchased from the iTunes Store, I have both .m4a and .m4p versions of each of these songs. If I view the "Kind" of each song within iTunes, the .m4a shows a "Kind" of "Purchased AAC Audio File", and the .m4p version shows a "Kind" of "Protected AAC Audio File". If I show the Bitrate, each copy of each song is the same, 256 Kbps. If I view each song file in the Finder, the .m4a is about double the size of the .m4p. I have a few questions surrounding this:
1. Why are the sizes of the song files so drastically different?
2. Some time ago I took advantage of that DRM-free promotion, so I am suspecting that this may have had something to do with me having both protected and non-protected copies of these files. However, I am curious why both files now show in my library, whereas before, they did not -- only one copy showed. Does anyone know why both song copies are now showing?
3. Should I keep both of these files?
4. Is there a way to manage these files in iTunes so that only one copy shows? They both show when duplicates are hidden, because they are different, or iTunes doesn't know of the association I suppose. But of course that messes up trying to play an album -- every song plays twice.
Thanks in advance for your answers.
BradNo--nothing gets deleted when you convert. You get two copies of the song in your library. (On Edit: I haven't done this with the latest version of iTunes. I assume nothing gets deleted just like before. To check--maybe you should convert ONE song and see if you get a duplicate in a smaller version, or just a smaller version! I've always gotten duplicates!)
I did leave out a few steps on how I do this--but if you're interested here's how I do it. Make the playlist. Then go to Edit>Select All. Then I go back to the top line: Advanced>Convert Selection to AAC. (To be able to do this you have to have your import option set to AAC 128 kps under the advanced tab in your Preferences settings. After you do the conversion make sure you set this tab back to your preferred lossless import option!)
You will get two copies of the songs in your library. Your original playlist will contain the lossless songs, so you'll have to pull the AAC songs back out into a play list. You can find them easily by sorting your library by "Kind" and then pulling the AAC files into a playlist. You can label this iPhone--or whatever.
After you load the playlist onto your iPhone, uncheck it so the songs are not duplicated in your library. If you ever want to delete them, you have to do this inside your library or the file will remain on your computer. (It does take a while to run the conversion--so I rarely delete things afterwards if I think I'm going to use the file again.)
Post back if you still have other questions. -
I have windows 7 and have tried the troubleshooting steps but am still unable to connect to the itunes store yet my PC is connected to the internet, it just keeps looking like its trying to access the store
I have the same problem but the solution Wendyz99 did has not been successful for me. Part of the itunes store loads on the right side where the tabs for Quick Links and Top Charts are but the center section of the page is white. Also if I click on a song that is in the top chart area it will take me to the page but I'm not able to purchase the song or preview the song.
I feel I have tried all the solutions I can find on line and even had conversations with apple tech with no help.
I have down loaded the Autoruns program and in the winstock providers I have Bonjour and Microsoft Windows Live ID Namespace Provider. I have removed Windows Live and this still does not resolve the problem. I am at a complete loss. I am running windows 7, 32bit. Someone please help! -
when i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well including chrome browser…i tried everything but no clue...anybody have solution for this..???
I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT -
I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on maps not found just runs? I have check all wifi issues with ATT&T, Verizon network all believe that it is the phones? I am confused as my 4S worked fine before adding the 4 to the mix....any thoughts are hits to what to do
Have you rebooted your home router?
-
I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes. Any ideas? I am on Windows 8.1 and my iPod is a Classic
Hi murr18140,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363?viewlocale=en_US
I hope this information helps ....
- Judy -
My App Store is connected to another account. I've tried to alter all my settings through iTunes, The App Store on both the phone and my Mac but it is still connected to the original owner's apple ID. Is there something I can do?
Turn off Find My iPhone in iCloud on the iDevice.
Log out of iMessage, Facetime, remove Apple ID from iTunes & App Store.
Use Settings > Reset > Erase All Content and Settings.
Then set it up as a new iPhone with your own Apple ID. -
I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks
I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
I have a problem with IOS 7 when I am installing app on App Store. I must read and accept new terms and condition. However, I read all new terms but I still don't see "Agree" button to accept. Can you check help me this problem?
If it says 'Open' in the App Store, then it's on your device. What happens when you press the 'Open' button in the App Store?
The App is on your phone, somewhere. Use Spotlight to find it, or you can reset your Home Screen layout, and then you'll definitely find it. -
Does the balance of a iTunes Gift Card that is "loaded" to my iTunes Store / App Store account have an expiry date ?
I know that the actual card/s have an expiry date, but when I load the card value into my iTunes Store / App Store account, will this balance have an expiry date ?
I can't find an answer.UPDATE
Last night, approx.11:00PM I sent a "Express Lane" enquiry regarding my question.
I received the following e-mail back at 11:30PM:
I have read through your email and understand that you would like to know if there is any expiry time for Store Credit on your account. My name is ******* and I thank you for letting me help you with this.
That is a very good question *******, and the answer is once on your account there is no time frame required for you to spend it. It does not collect interest, but it will certainly be there for you, ready to be used when you find something that interests you.
Thank you for choosing iTunes as your source of entertainment, *******. If you have any more questions feel free to contact me as I am only an email away. Have a great day!
I have removed the names and highlighted the answer to the question I asked the forum.
Maybe you are looking for
-
BI : Error While Creating the Generic DS
Hi Experts, I would like to know that while creating the generic data for Journal entry i am getting the below error. Kindly advise. "Field FRATH with reference field WAERS: ZOXTCD0017 is to replace reference table T001". thanks & regards, M.S
-
BAPI for subsequent credit memo in MIRO transaction
hi, i need to upload the data for subsequent credit memo in MIRO transaction using BAPI. Is there any BAPI for subsequent credit memo in MIRO transaction? Thanks & regards Prajwala
-
How can i import abbreviations in text to speech without using voice over?
Hi, I have recently discoverd text to speech on my macbook, and I like what it can do. I would like to edit the way it pronounces some abbreviations. I discovered this was possible with voiceover. I would like to do this even when voice over is turn
-
How to make a package and import it later
Hi folks, this is a very basic question but it is not working to me so i will appreciate your comments. I had programmed many classes that are going to be used in many projects so they must be part of a library. Tell me whether or not this procedure
-
Hi , I'm trying to do a test automation using codedUI. This is a Windows application based on WPF. I recorded the events and when playback I get a error. There are two datetime pickers in the same form and when doing a playback one is picking up the