New Ipod won't come up in Itunes

I dropped my old ipod in the toliet (long story) so today i went out and bought a new one. I fully charged it in my wall charger...but when i connect it to the computer, it does not come up in itunes or windows.
I updated itunes and quicktime. ( I dont want to loose all my music by deleting itunes then reinstalling it.
How do I make it work?!?

One thing you can try to do is force it into disk mode THEN connect it to your computer as per these instructions...
http://docs.info.apple.com/article.html?artnum=93651
Patrick

Similar Messages

  • My ipod won't come up in itunes, what do i do?

    My ipod won't come up in itunes, what do i do?

    Uninstalling/ reinstalling iTunes does not affect your music. You may also want to consider reinstalling the iPod software that came with your iPod, as well as restoring the iPod. Instructions here:
    WARNING: This will erase everything on your iPod. If it's all on your computer already, no worries.
    http://docs.info.apple.com/article.html?artnum=60983

  • My new Ipod won't work with my itunes..

    I have the most recent version of iTunes, and when I connect, it takes me to a screen that tells me to restore my iPod. I click restore, it downloads an update, and then an error message comes up and says "The iPod 'iPod' could not be restored because the firmware file was corrupt." PLEASE HELP!! This is my first iPod and I just got it two hours ago and I'm so anxious to get it up and running!

    Any help here?
    http://docs.info.apple.com/article.html?artnum=304309

  • My IPod shuffle 4th Gen Charges but won't come up in itunes or turn on?

    I have bought an IPod shuffle 4th gen and it won't come up in Itunes and it won't turn on, in Itunes it just had a red light and when I unplugg it, no light at all.

    Did it previously work with your computer and iTunes?  Or is this brand new, never previously connected to your computer?
    You can try this procedure to reset the iPod shuffle
    http://support.apple.com/kb/HT1655
    Then, shut down your computer (power off) and start it up, with iPod shuffle NOT connected.  Run iTunes.  Then, try connecting the iPod shuffle again.
    If that iPod is less than one year old, it is under warranty.  You can contact Apple (or make an appointment at an Apple Store Genius Bar) to see about getting it replaced (if it's broken).

  • When I connect my iPod to my computer, it won't come up on iTunes. There aren't any error messages. Help?

    When I connect my iPod touch to my computer, it won't come up on iTunes even when I open iTunes. iTunes doesn't come up with and error messages either. Really confused by this. Any suggestions?

    After upgrading to Windows 8 . I was having the same issue. I uninstalled all Apple related software from PC. downloaded Itunes from the Apple website. It reinstalled all the software that I removed through the itunes download. Opened itunes and there was my phone completely recognized and ready to backup to icloud or pc.

  • New ipod won't show on itunes but old ipod will

    I bought a brand new 5th gen ipod and installed the software and it only installed the ipod updater, so as i already have a 3rd gen ipod and itunes on the computer i uninstalled all ipod and itunes software that had previously been downloaded and started again from scratch with the new ipod. This time it downloaded itunes as well as the ipod software but did not ask me if my new ipod needed configuring. After restarting my computer as suggested i connected the new ipod to the computer and it shows up on windows as new hardware been installed but nothing else happens. It doesn't show up in itunes or ipod updater, however the old ipod does.
    Can anyone please help me?

    Welcome to Apple Discussions!
    See these...
    Windows Recognizes iPod But iTunes Does Not
    Windows Does Not Recognize iPod
    btabz

  • New iPod touch issues. not recognizing in iTunes

    i just got a new ipod touch and installed everything and itunes will not recognize the ipod. I went on support and tried what it said by holding down the sleep button and the home button at the same time until the apple appeared and then closing out of itunes and opening it up and plugging the ipod back in which helped it to recognize. the ipod then went into recovery mode and said it needed to be restored. Restoration began however, the connect ipod to itunes screen disppeared leaving a lit up and black screen and a window appeared in the "preparing ipod for restoration" stage that said "ipod could not be restored. an unknown error occured (1604). any ideas? oh and then the thing on the side that said ipod disappeared and it stopped recognizing the ipod again.

    Welcome to the discussions,
    Error 1604 points at a problem with your USB drivers/connection.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the USB 30-pin dock-connector cable. If the issue persists on a known-good computer, the device may need service.
    more detailed info here: http://support.apple.com/kb/TS1275
    Install USB drivers: http://support.apple.com/kb/TS1538
    Also check your security software settings: http://support.apple.com/kb/TS3125
    Message was edited by: Ingo2711

  • I just got a new Ipod and had to update my Itunes to a newer version to use it. But now Itunes app will not open on my computer. What do I do?

    I just got a new Ipod and had to update my itunes. Now my itunes will not open. I have a MacBook 4,1 with Mac OS X 10.6.8.

    On your phone: Settings>General>Reset>Erase All Content & Settings. Should take but a minute & the phone will look just like it did when first taken out of the box.
    If you're gonna use the phone on the same computer your son uses, read through this:
    http://support.apple.com/kb/HT1495

  • My new ipod won't synch or restore

    My new ipod won't synch. It comes up need to restore, then can't be restored.  Error code 9.  Security disabled.

    Error 9: This error occurs when the device unexpectedly drops off the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Try a different computer.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • My new IPOD won't sync, the error says I do not have enough space but at the bottom it shows I have extra space....help

    My new IPOD  won't snyc, the error message says I do not have enough space but ir shows at the bottom of the screen and on the main page that I have pleanty of space. Help!

    It appears that you are trying to sync too much media to the iPod. Check your checkmarks. Also see:
    How to sync music to your iPod when your library is bigger than your iPod storage space
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    or
    iTunes 11 for Windows: Syncing overview
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

  • HT201272 I bought a new Ipod Nano and purchased songs on Itunes.  How do I download the songs from the computer to my new ipod

    I bought a new Ipod Nano and purchased songs on Itunes.  How do I download the songs from the computer to my new ipod

    Connect the iPod to your computer and select it on the left-hand sidebar of your computer's iTunes (if you have iTunes 11 on your computer then you can enable the sidebar via option-command-S on a Mac, control-S on a PC), and then on the right-hand side you can use the Music tab to select which of your music that you want on the iPod.
    Syncing music : http://support.apple.com/kb/HT1351

  • My new ipod touch is not recognised in itunes or Windows 7 on any of my computers/laptops.  I've followed the online advice and still no luck.  Help much appreciated!

    My new ipod touch is not recognised in itunes or Windows 7 on any of my computers/laptops.  I've followed the online advice and still no luck.  Help much appreciated!

    Does it charge?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try another cable
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Brand new iPod Shuffle is not recognized by iTunes and Win XP Laptop

    I have iPod nano and iTunes 7. Just got a brand new iPod Shuffle (2nd Gen). Neither iTunes nor my laptom recognize the iPod Shuffle - it is not even getting charged. I tried all the tips from the offical support, but nothing works.
    Should I just throw it away and get a new one or is there a way to make it work?
    Laptop   Windows XP  

    Why would you throw it away if it is in warranty? Why not exchange it?
    What kind of laptop is it?

  • My iPod won't show up in iTunes but it does in my pc, isn't iTunes problem!

    My iPod won't show up in iTunes, but it does in My Pc. And I want to say that is not an iTunes problen, cause I have an iPod nano, and it works perfect with iTunes and with windows. My iPod won't show up in any computer at all, so I have read all the articles here in Support, and none of them give me a solution. I need to restore my iPod but I can't cause doesn't appear in the source list in iTunes. Do I have to send it to Technical Support? Please Help Me someone, cause I've been posting messages for one week now, and I haven't got an answer!! Pleaseee!!

    You can try putting it into disk mode to see if it makes it easier on iTunes to recognize it.
    To put your iPod into disk mode:
    1) make sure your hold switch is OFF (NO ORANGE SHOWING)
    2) hold the menu button and the center button at the same time for about 6-10 seconds until you see an apple logo
    3) AS SOON AS you see the apple logo, release the two buttons and hold down center and play/pause
    4) If you've done this properly you should now see Disk Mode Ok To Disconnect with a checkmark (when connected to your computer you should see Do Not Disconnect with Disk Mode at the top)
    After you have the iPod in disk mode...see if iTunes picks it up then.
    Keep me update.
    -Wyett

  • My new Ipod Nano isn't recognized by itunes.

    My new Ipod Nano isn't recognized by itunes.  I did all of the troubleshooting and even uninstalled Apple Mobile Device.  I can't get it back.  Can anyone help me?

    Hi MartyP680, 
    Thank you for visiting Apple Support Communities. 
    It appears that you're receiving a message that your iPod nano can't be identified properly, and you've already tried removing and reinstalling iTunes. You've also isolated this behavior to only one of your PCs. 
    If the issue persists, there are some additional tips in this article that may help, including verifying that the Apple Mobile Device Support service installed properly and is running:
    iPod nano: Error message saying that iPod could not be identified properly - Apple Support
    The "Learn More" section also mentions some other potentially conflicting software to look for on your PC. 
    Best Regards,
    Jeremy 

Maybe you are looking for

  • VIrtual Cube with user exit

    Hi, This is the Scenario : Version : Bi 7 / Nw04s patch 11. Source : ECC 6. 1) Virtual Cube V1 based on a generic Data source D1 in ECC or R/3 source system 2) The generic data Source has 10 fields , 7 are from a Standard Table, the 3 are populated d

  • ChaRM transport not getting created

    Hi Experts, I am in SP20 EHP1. I am configuring ChRm flow. I have made the copy of SDHF to ZSHF. I have completed all the configurations.  I have made the copy of all the actions & statuses. I am having two actions in ZSHF while creating the transpor

  • Links and PopUp Links in a Report

    Hello: I am trying to use Denes Kubicek's example of how to add a link to a SQL statement used to create a report and by doing so have the link call a Popup. [http://apex.oracle.com/pls/otn/f?p=31517:24] The example that I have is: SELECT return_link

  • Customer Hierarchy using MDM

    Hi, We would like to build customer Hierarchy using MDM that would match the DUNS hierarchy. Is this possible to Model this using MDM? Thanks, Sanjay

  • Floating, unlinked org unit in CRM

    Hi All CRM4.0 In ERP I have an org unit that is linked to a higher level org unit.  In CRM the same org unit exists but it does not have higher level org unit.  I want to run PFAL in ERP with the correct evaluation path so that in CRM the org unit is