New iPod won't connect to a computer installed w/ old iPod

I just purchased a new 2nd gen. iPod nano to replace my 2 year old iPod mini. My laptop recognizes my mini fine, but won't even detect my new nano. Why is this? I saw in the other topic that a BIOS update would do the trick, but I updated and the computer still won't recognize. What can I do?
Thanks for your help
Dani

This could be caused by Windows drive letter confusion on your computer. Have you tried assigning your Mini a different drive letter?
Log off of any other users on your computer (and disconnect any iPods that are currently connected to your computer, as well)
Then, put your iPod into Disk Mode, and follow these steps:
1 - Don't plug in your iPod yet.
2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
3 - Click on the "Disk Management" button in the left panel area.
4 - Now, with "Computer Management" and Control Panel windows opened, connect your iPod to the computer.
5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
Here's what it should look like:
Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
For more details, see this article:
Windows confuses iPod drive letter / Changing drive letter
If that fails to get your new nano recognized by your computer, try the steps and suggestions in these links below:
iPod missing in My Computer or in iTunes
iTunes 7 doesn't recognize iPod
iPod not recognzied on a laptop through USB connection
Also, this possibility: Fast user switching on a Windows computer is not supported for iPods
I hope that helps you.
-Kylene

Similar Messages

  • Ipod won't connect to the computer at all.

    My 3rd Generation iPod nano won't connect to the computer at all. Therefore it has no battery for me too be able to reset or try to do anything with it.
    I've only been advised to make sure that i have the most recent version of iTunes?
    Could anyone help please?
    Thanks, Hollie.

    Try uninstalling the drivers,
    Plug in your iPod
    Right click on My Computer and click on Manage
    that will bring you to the Computer Management
    On the left hand side click on device manager
    on the right side click on the plus sign next to Universal Serial Bus Controllers
    it will show a list, in that list locate iPod or USB mass storage device
    right click and select uninstall
    Unplug your iPod and plug it back in
    Windows should automatically start installing them again
    if nothing pops up then right click on Universal Serial Bus Controllers
    and choose scan for hardware changes
    If that doesn't work
    Go back into Computer Management
    Click on Disk Management on the right
    and on the left it should say your iPod
    Right click and go into change drive letter and paths
    click on the change button
    Change it to something like N or M
    Click ok, you will get a message saying "changing the drive letter may cause the program to no longer run are you sure you want to change this drive letter"
    click ok
    then restart your computer

  • IPod Won't Connect to PC Computer

    I have had some issues I wasn't able to fix concerning my iPod Classic and my PC computer. Until recently, my iPod 120G Classic would not connect to my computer. I have downloaded the most recent version of iTunes, I've tried resetting it, and I've restarted my computer a couple times. I cannot restore it cause it won't connect to my computer. I've tried Disk Mode as well as changing USB ports. This didn't work. What happens is that it says USB not readable or something similar to that on the connection for half a second than disappears. This has been occuring ever since I synced a movie to my Classic. Any suggestions on how to fix it?

    I have had some issues I wasn't able to fix concerning my iPod Classic and my PC computer. Until recently, my iPod 120G Classic would not connect to my computer. I have downloaded the most recent version of iTunes, I've tried resetting it, and I've restarted my computer a couple times. I cannot restore it cause it won't connect to my computer. I've tried Disk Mode as well as changing USB ports. This didn't work. What happens is that it says USB not readable or something similar to that on the connection for half a second than disappears. This has been occuring ever since I synced a movie to my Classic. Any suggestions on how to fix it?

  • IPod won't connect to iTunes/Computer

    Soo I plug my iPod into the cord which is plugged into the computer, the computer makes the little beep that lets me know its detected a device and... Nothing. It doesn't show up in iTunes. It doesn't show the little charging symbol on the iPod. Nothing.
    I've tried two different cords and three different USB ports. The annoying thing is it worked two days ago, and had been working prior to that for several months. Nothing has happened to the iPod or computer that would cause damage. They've both literally been sitting in this room for two days. I can plug my iPod into the wall charger and it will charge just fine. It can connect to the internet, etc. But it won't connect itself to iTunes via the USB cable... and I'm unsure of what to do next. I've googled around and checked the forums but I haven't found anything that works.
    Assistance :3
    Also, I can't download iOS 6.1.2, it just fails everytime after the verification process. I've never failed verification before so I'm not sure if this is a widespread issue or just me... The error I guess you would call it says "Software Update is not available at this time. Try again later."

    This was the result of the Sync Test:
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Gigabyte Technology Co., Ltd. To be filled by O.E.M.
    iTunes 11.0.2.26
    QuickTime not available
    FairPlay 2.3.31
    Apple Application Support 2.3.3
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.63.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0040BD380AA41E90
    Current user is an administrator.
    The current local date and time is 2013-03-01 10:06:48.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GTX 550 Ti
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.0.2.26 (x64) is currently running.
    iTunesHelper 11.0.2.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    It said it didn't detect any iPod etc, although it is connected. I'm looking at it right now.
    I also ran the Device Connectivity Test and the results were:
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Gigabyte Technology Co., Ltd. To be filled by O.E.M.
    iTunes 11.0.2.26
    QuickTime not available
    FairPlay 2.3.31
    Apple Application Support 2.3.3
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.63.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0040BD000AA41F10
    Current user is an administrator.
    The current local date and time is 2013-03-01 10:10:54.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GTX 550 Ti
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 11.0.2.26 (x64) is currently running.
    iTunesHelper 11.0.2.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26.  Device is working properly.
    Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D.  Device is working properly.
    Intel(R) USB 3.0 eXtensible Host Controller.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    VIA 1394 OHCI Compliant Host Controller.  Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPod touch (4th generation) running firmware version 6.1
    Serial Number:          C3RG90TPDCP9

  • IPod won't connect to my computer and constantly presents an error message

    My iPod has started acting really bizarrely recently. It constantly displays the folder with the exclaimation mark. (I've been to the apple site, their suggestions don't resolve this issue). Whenever I plug it into my pc, it shows up as an external hdd in my computer (but not named as "stu's iPod" like it usuaully is), but won't let me open it. On attempting to open it as an external hdd, my pc says the drive needs formatted (but won't let me format it, I get an error message if i try). Whenever I connect to the computer, the iPod automatically goes into disk mode, even though I haven't put it into disk mode. I have downloaded the software updater but it just sticks on "initializing" then crashes (the window containing the iPod updater goes completely white). I'm at my wits end with this and any help to resolve it would be much appreciated, thanks.

    similarly, my iPod had acted like that for a while. instead of the folder, it displays the "unhappy ipod" symbol, but if left on a charger for an extended period of time, it will return to normal function. after a few power up/power downs, it either will not boot correctly, or after booting, will not play the desired song (it just attempts to open it, fails, and tries the next song). it seems to come back to normal function faster if left connected to my laptop, as opposed to the wall unit or my car adapter. also, i opened the special menu (holding the center button and rewind/previous track button for a few seconds) and ran a harddrive scan. it returned the code "11ror!" is that a good or bad sign? i've only owned the ipod photo (4th gen, 30 gig) since june/july of this year, so it should still be covered by warranty...
    4th gen/IPod photo 30 gig   Windows XP  

  • IPod won't connect to my computer correctly

    When I plug my iPod Classic 80GB into the computer the screen of my iPod freezes.
    It is recognised as new hardware when plugged into the computer but does not appear in iTunes.
    When I first purchased my iPod it connected to my computer fine, but now that it has music on it it is failing to connect properly.
    My computer only has USB 1.1 ports, could this be the reason?
    If this is the case, is there any way to work around it without having to update to USB 2.0?
    Thanks

    I've had a similar experience. I just purchased the IPOD Classic (80gb) a few days ago. It originally synced up nicely. Out of nowhere, the IPOD froze, as did my O/S (Vista). I executed a System Restore on the O/S, and also reinstalled iTunes again (v7.5)
    Since I was unable to do anything with my device, I let the battery run out. Hoping that I would be able to reconnect the device to my PC and recharged the battery, and thus unfreeze the device, it was not to be.
    At this point, I have the device connected to the PC 9charging), but it continues to turn on and then off. I see an Appe insignia for a few seconds, then nothing. If the PC is not recognizing the device, how do you go about trying to reset the device?
    I'm ready to get a replacement, but am hoping someone can assist.
    Thanks,
    dgioia

  • HELP...ipod won't connect to my computer

    ok so my ipod was working just fine until a few days ago and now when i plugg my ipod into itunes it is saying that it doesn't recognize it and is asking me if i want to restore my ipod. I can't restore my ipod because i don't have my music backed up...is there any way what so ever that if i restore my ipod i can get my music back???

    First try repairing iPod using chkdsk on the drive letter allocated to the iPod. There are programs around which allow you to copy your song files from the iPod to a PC (do a google search or search the apple discussions to find them). One you've got a safe copy on the PC - which you've backed up. Then go ahead and restore (which will wipe your iPod).

  • My iPod won't connect to my computer

    I have an iPod nano 5th gen that's basically brand new. When I plug it in to my computer it briefly recognizes it then the iPod is disconnected. It can't even be found on My Computer. I've tried multiple cords and multiple computers but nothing helps. It charges fine though so it can't be the iPod can it?. Thoughts?

    Try opening i-tunes before plugging your ipod in.
    You could also try resetting it; switch the hold button on and off, then press and hold the menu and center buttons till the Apple logo shows up. Connect your ipod when the main screen shows up.

  • My ipod won't connect to the computer why?

    i tryed putting songs on my ipod today and at first it was working but i left and took it with me but i havent put the songs i wanted so when i came back i tryed connecting my ipod to the computer and nothing would happen.. idk what happened it just stopped working..=(

    i tryed putting songs on my ipod today and at first it was working but i left and took it with me but i havent put the songs i wanted so when i came back i tryed connecting my ipod to the computer and nothing would happen.. idk what happened it just stopped working..=(

  • Help! My iPod won't connect to ANY computer.

    I Recently replaced my iPod and got a new one. Out of the box, this one will not connect to any of my computers. It does not even charge. I have tried different cables, but that is not the issue. How can I fix this? Can I at all? By the way, I just got this one yesterday at an Apple store in Brandon, Fl if that helps.

    Do you have iTunes 10.7 or later on the computers? That is required.
    Next make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar       

  • My ipod won't connect to the internet but my friends ipod will and it's on an open network

    What should i do btw it's a 4th gen

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Ipod won't turn on and computer won't reconize

    my 80gp replacement ipod that i had for 1-2 days just all of a sudden wouldn't turn on and when i try to connect it to my computer the ipod won't connect to my computer. it is almost like the ipod isn't even connect to the computer. need help on this if any body know what to do it would be very appericated

    I've had my 120GB iPod since Christmas and it just happened to me now. I put it into my friend's iPod dock because she was complaining it wasn't working, and I wanted to see if it would work for other iPods. My iPod showed the charging screen, then promptly shut off.
    Hope this problem gets fixed or recognized soon, I don't want to have to switch to CDs in my car again!

  • 40GB Ipod Won't Connect...?

    My 40GB iPod won't connect to the computer when i plug it in. The display comes up with "Do Not Disconnect", but iTunes won't open or anything. It just stays like that.
    I've tried connecting to another USB port, restarting the computer and iPod, but nothing seems to work.

    The only time I use a USB is for my nano because it's not supported by a firewire; otherwise, I'm not a big fan of USB's and use the firewire for my other pod. Have you tried a firewire?
    http://docs.info.apple.com/article.html?artnum=93405
    http://docs.info.apple.com/article.html?artnum=32491

  • Ipod Won't Connect!

    hey
    ok so last night, i figured i'd put some more songs on my ipod... it kept having trouble connecting, but it eventually would... then i accidently pressed the "sync ipod" button, and it erased everything... then i felt a little bit better since i still have all the songs on my computer... but now my ipod won't connect to the computer... i plug it in with the usb cable, and on the ipod, it says Do Not Disconnect... but iTunes does not prompt when i plug it in... and it won't recognize my ipod... help please
    Amanda

    connect the Ipod and then restart the PC
    -reset the ipod
    -put the ipod in disk mode
    -then restore
    follow this article
    http://docs.info.apple.com/article.html?artnum=61711
    Thanks

  • Hy won't my ipod touch 5G connect to my computer or itunes? I've tried new USB cables, different USB ports and uninstalling itunes and reinstalling.

    Why won't my ipod touch 5G connect to my computer or itunes? I've tried new USB cables, different USB ports and uninstalling itunes and reinstalling.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

Maybe you are looking for

  • Why can't I import anything? "File video dimensions (width/height) too large"

    New to PP CS4 here (that will be obvious momentarily...).  I can't seem to import any footage into any project (well, at least none of the bits I've tried, and I don't think there's anything 'wrong' with them).  Every time I attempt to do so, I get t

  • 2 Computers - 1 Site

    I purchased iLife '06 not long ago and immediately took advantage of the iWeb application. I've already created my own site, constantly updating and improving it when I feel the need to. I'm quite pleased with the capabilities of iWeb, but now that I

  • Printing a HTML doc from a JEditor Pane

    I would like to print a HTML page from a JEditorPane. I've searched trhough the web, but haven't found any free libs yet... Does anybody have some tips?

  • Implementi​ng logarithmi​c sampling

    Hello, I have what is probably an easy question. I am quite new with labview and will appreciate someones help. I am logging some data from a sensor using a cfieldpoint. Currently I log the data every 'x' milliseconds using a control which allows me

  • Halo 5 and The Master Chief Collection at Best Buy

    Halo 5: Guardians Continue the Halo saga with next installment of the franchise, this time for Xbox One, Halo 5: Guardians. Pre-order your copy of Halo 5: Guardians from Best Buy today and get ready to don Master Chief’s armor again once it’s release