New issue breaking Gmail when using custom domain name

I have been using my own domain name in conjunction with Gmail since the launch of Gmail. The use case is fairly straightforward -- I have my own domain name and have created an email address alias on this domain ("custom email address') that forwards email to my Gmail account. I have configured Gmail to override the From field with this custom email address. With this configuration, Gmail is happy.
On my Z10, I had created a Gmail email integration account via the Advanced Settings with my custom email address in the "email address" field and my gmail email address as the username with the appropriate gmail server settings. When I continue from the advanced screen, I was taken to the Google account login screen where I grant permissions for my BlackBerry to access my account. On this screen, I logged in using my gmail email address. This worked fine and I received email without incident on my Z10 since I bought it on the Feb launch date ... until this past weekend. My Z10 then suddenly reported that my settings had changed and nothing I could do could convince it to accept the above settings as correct.
If you have a similar configuration and have noticed recent issues, there is a solution. This new "issue" appears to be that when you log into the Google permissions screen during the BB10 email account configuration process (i.e. the Google login page after you enter all the server settings in Advanced section of BB email account setup), you are no longer allowed to enter a username that differs with the custom email address you are setting up. It won't ever tell you that this is the problem. You just get a vague email settings error at the end of the process and you can't get your mail. It is possible that Google is the one who introduced this glitch, since the solution is within your Google account configuration, not BlackBerry. Simply put, you must associate your custom email address with your gmail account login within Google.
To do this, log in to Gmail using your usual gmail address. Click on your Gmail address in the top right corner, select the "Account" link in the drop down. Click the "Edit" link to the right of the Email heading. At the bottom of this edit page add your custom email address in the field next to the label "Add a new alternate address". After you add it, you will need to verify this address via an email that will be in your Gmail account. I probably should have done this long ago, but never had the need to until now.
Now you can get BB email working again. Go back to the BB10 account settings page for your Gmail account. This time when are kicked over to the Google login page to grant permissions to your BlackBerry to access your account, use your custom email address as your Google username and use your usual Gmail password.

Amazing, Thanks !

Similar Messages

Problem when using own domain name

Hi,
I recently updated my site and gave it a fresher look. I have my own damian name and use iweb and mobileme to host it. the site works fine but the one problem i have is that no matter what page I view of my site it always says my web address in the address bar. For example my site is thecarpetfitter.co.uk. It this site I have 7 pages plus some pages of photos. Now when i'm viewing my about me page the address bar still only says the main site address not thecarpetfitter.co.uk/about me. It does this for all my pages. It's a problem because nobody can bookmark an the actual page they want only the first pages that loads up (welcome page). How can I change this?
cheers

It sounds like you're using Forwarding rather than CNAME to link to MobileMe. See this article for the difference in the browser address bar:
http://iwebfaq.org/site/iWeb_Domains.html
Also this Apple doc for setting up CNAME:
iWeb ’08: Using your own domain name

Xperia Z1 mic issue (low volume) when using WeChat

Was searching this forum for a solution, but to no avail. Using Wechat on Xperia Z1 with Android 5 is impossible because mic records at very low volume and other parties strugle to hear me. Microphone suppresion and voice enhancement are turned off, equalizer set to normal. PC companion shows most current version of software. Dear users and/or Sony, could you suggest for any solution?

Please consider this before buying Sony Xperia phones: Chat TranscriptPlease wait while we find an agent to assist you...You have now been connected to an agent.Emir: Hi Client Name! Welcome to Sony Xperia Support, my name is Emir.
I'm currently reading your message. In the meantime, I would appreciate if you kindly could leave your first and last name, your e-mail address and mobile phone number.Client Name: Client Name, [email protected], +37067530xxxEmir: How may I help you?Client Name: Hello, I have posted a topic about an software issue in Xperia Z1: http://talk.sonymobile.com/t5/Xperia-Z1-Z1s/Xperia-Z1-mic-issue-low-volume-when-using-WeChat/m-p/1020748/highlight/true#M44196Client Name: it was ignored by staff, so I posted another topic about how Sony ignores issues of flagship phone ownerClient Name: this topic was moved out of forum to this topic to be burriedClient Name: can I speak with someone in charge?Emir: No, there's no such contact I can refer you to,.Emir: I'm sorry to hear that your thread has not been replied to.Client Name: What do you mean? You're independant worker not accountable to anyone?Client Name: its been replied with default answer that all posters with similar problem receivedEmir: I'm a technical support agent for the chat, I don't have any information about the Forum team.Client Name: we are specifically ignored until Z1 goes broke and out of your problemsClient Name: I need someone in charge from your department who could personally overlook this issue that many users haveClient Name: its not just me, mic problems are apparent for many usersEmir: This issue concerns a third party app, and you have already been in contact with me regarding this issue. We can't guarantee that third party apps are compatible with your device since we do not develop them. I recommend that you contac the app developer for more information.Client Name: I dont understand why phone hacker can solve this software issue by themselves, but Sony engineers choose to ignore usClient Name: no, this issue also goes to many other apps, including native app TrackIDClient Name: its the problem in new Android releaseEmir: You may try a software repair to see if the issue persists in TrackID like the agent on the forum suggested - if the problem persists and you suspect there's something wrong with your device you may have it sent in to an authorized service center so that a technician may examine it.,Client Name: These steps were performed by other users with no luckClient Name: I wont repeat this to come to the sameClient Name: I ask engineers to look into solution developed by XDA team and implement for us normal usersEmir: Those are the troubleshooting steps I can refer you to in this case.Client Name: They dont work, please find another solution or ask for person who can do it, if you cantEmir: I have already provided troubleshooting steps, you may try that. If a software repair does not help then I can only refer to service.Client Name: I already told that these steps didnt work for other users, who have same problem. So you admit that you wont help your client?Emir: I can't suggest a possible solution other than what I've already suggested unfortunately.Client Name: So I have no choice, but to share our chat in all possible internet sources for other existing or would be Sony users to consider how they will be treated upon problems arise.Client Name: Thank you for your support, I hope you will be promoted for high quality service

Add Gmail account with custom domain to mail

Hi there,
I've added my standard Gmail account to the Mail app on my macbook air 2013 but i also have a school email from Google that I would like to add as well. This email uses a custom domain name so instead of [email protected] it would be [email protected] I've tried to add it in as a google account and as 'other' but i can't seem to make it work. Would be much appreciated if someone could walk me through the steps.
If you have any questions let me know!

I finally figured out my workaround (I'm using Mavericks).
Go into Mail and Add Account. Then do what wubie317 says, select "Add other account" DO NOT select Google / Gmail.
You will then be asked to enter the mail server addresses for Gmail. The info is below. Good luck!
Incoming Mail (IMAP) Server - Requires SSL
imap.gmail.com
Port: 993
Requires SSL:Yes
Incoming Mail (POP3) Server - Requires SSL:
pop.gmail.com
Use SSL: Yes
Port: 995
Outgoing Mail (SMTP) Server - Requires TLS or SSL
smtp.gmail.com
Port: 465 or 587
Requires SSL: Yes
Requires authentication: Yes
Use same settings as incoming mail server
Full Name or Display Name: [your name]
Account Name or User Name: your full Gmail address ([email protected]). Google Apps users, please enter user...@your_domain.com
Email address: your full Gmail address ([email protected]) Google Apps users, please enter user...@your_domain.com
Password: your Gmail password

Interactive Report - search does not work when using custom authentication

Apex 3.2.x
I can authenticate fine with my custom authentication and all of my pages work okay except for one page that uses the Interactive Report feature. When I click 'Filter' then enter the column name, operation (contains, =, like, etc.) and the expression, then click the 'Apply' button, the page just re-displays and my filter information is missing?
If I first login to Apex, select and run my application, the Interactive Report features work just fine. What's missing?

More information:
After login into my Apex workspace (development environment), when I display the Interactive Report and click debug I see this debug message:
"using existing session report settings"
When I login using my application's custom authentication and click debug I see this debug message:
"creating session report settings as copy of public saved report"
Based on this, it appears that my session info in not set correctly when using custom authentication... but I'm not sure what needs to be set.
Edited by: user9108091 on Oct 22, 2010 6:44 AM

Custom domain name pointing issues

Hi
I've set my custom domain name for my webpages and it is working fine - www.domain.com points to my iweb site. But how can i make sure that domain.com (without the www.) also points to my iweb site? I know I could change settings on my domain registrar (godaddy) and create an A record but it requires an IP address to point to...
Any ideas?

But how can i make sure that domain.com (without the www.) also points to my iweb site?
Please read the 3rd bullet on the godaddy instructions
http://help.godaddy.com/topic/163/article/4100
I know I could change settings on my domain registrar (godaddy) and create an A record but it requires an IP address to point to...
If you want to do it that way, you use the IP for web.me.com You can find this at any of the countless websites which let you look up IP's.

Azure AD user name not using configured custom domain name

I have configured a few users for Lync Online that I setup before I had custom domain name work with Azure AD. Now I have the custom domain setup and verified and configured as the primary domain. The users that were configured for Lync
Online are still displayed with the *.onmicrosoft.com username in Azure AD.
Is there a way I can change these users so their usernames use our custom domain?

You can easily change the UPN via PowerShell:
Set-MsolUserPrincipalName -UserPrincipalName [email protected] -NewUserPrincipalName [email protected]
If you want to do this in bulk for all users, you can use something like this:
$all = Get-MsolUser -All
$users = $all | ? {$_.UserPrincipalName -match "tenant.onmicrosoft.com"}
$users | % {Set-MsolUserPrincipalName -UserPrincipalName $_.UserPrincipalName -NewUserPrincipalName $_.UserPrincipalName.Replace("tenant.onmicrosoft.com","domain.com")}
Test it first against a single user of course :)

How can i set "Createdby" attribute When using Custom JheadStart Security

Hello
We do not use JASS for Authentication , please help us how can i set createtby attributes with jhs.username in application for any entity object?
thanks

See a similar question at History Attributes when using Custom Authentication Type

Smartform font spacing Issue when using SAP printer name

Hi Friends,
I am facing some spacing issues when printing a form using SAP printer name. If I use LOCL then the output comes perfectly but when I use the SAP printer name the space between characters are getting widened and so the alignment of each column goes wayward. I suspect it could be due to the device type but not sure which seeting controls this. There is a similar problem in the logo as well. When using LOCL the logo comes out good but when using the printer name the quality is not good and becomes pixelised. Have any of you faced similar issues? Can you provide some guidance or pointers for the solution.
Device type of LOCL : ZSAPWIN
Device type of SAP printer name : ZHPLJ5
CPI is defined in smartform as 10.
Please let me know if you need more information.
Thanks,
Praveen

Hi,
This problem occurs because the printer driver for both the printers are different,
I suggest you use Local printer only or configure any other printer with printer diver in SAP as SAPWIN.
Regards,
Bharat.

Custom Domain name for Azure virtual machine using azure websites

Hie, I am using a cloud service (e.g cloud1) and it has a hosted VM in it (Windows server 2012). It is having a URL cloud1.cloudapp.net. So I want to use the domain name (e.g azuresite1.azurewebsites.net)created from azure.
So how do I add the Cname record and everything in this setup .
I already tried to use
this but that didn't work
What additional steps are required to add custom domain name to an azure virtual machine and, the custom domain name is also an azure website

If you want to use azuresite1.zurewebsites.net then i think, you have to create a azurewebsite. If you have a custom domain then following should work.
You have findout the IP that is attached to the VM.
Point your domain name to that IP (using domain dashboard)
Now your domain points to whatever the site hosted on the VM (port 80)
If you have more sites then, you have specify HostName for the site which you want to use with domain name.
Try and let me know if this helped.

Error message when publishing to MobilMe using GoDaddy domain name

Hi all,
I am trying to publish my site from iWeb '09 to MobilMe. I am using a domain name purchased through GoDaddy. When I publish the entire site in iWeb, it seems to publish fine, but when I click to "visit site", I get a page with an error message, "Looking for something on MobileMe?
The account you requested doesn't exist or is currently inactive. Please make sure the URL is spelled and capitalized correctly, and try again.
MobileMe Login | MobileMe Support | Learn more…
I have checked my login info, etc. I have no idea why this isn't working. Any thoughts???
Thanks so much - Chris

That Vist button has been a problem for others also. Why, I don't know. Try using the File ➙ Visit Published Site menu option. That has worked for me when the Visit button wouldn't.
If that menu option works you can try the following to see if you can get the Visit button to work:
1 - close iWeb.
2 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
3 - go to your Home/Library/Caches/com.apple.iWeb folder and delete the contents.
4 - reboot.
5 - launch iWeb and try again.

Design a site, use my domain name, and host it via .mac

It sounds simple, and I thought a search through these forums would yield some easy answers, but no luck, so here goes:
I'm an advanced Photoshop and Final Cut Studio user, running an audio/video/image restoration and transfer business, but I'm a total beginner in the iWeb/.Mac area.
About three years ago, I decided it was time for a web site, so I went to a local company; they designed and still host my site, for which I pay them $30.00 per month; it's a simple site with no ecommerce, and six or seven pages. There is a contact form through which potential customers can email me.
I also have a domain name, for which I pay $15.00 per year to the same company.
My site is OK, but it's the same as it was three years ago; any small changes I have asked the company to make (mostly just text additions/changes) they have done at the rate of $75.00 per hour.
What I want to do is cancel my account with them, design a totally new site using iWeb, start a .mac account, and have the site hosted using my domain name, so that the average customer who sees my newspaper ad can navigate to my new site exactly as they can with the current one. (I only have one email account, through my ISP, which I don't want to change.)
I've got lots of questions, but mostly, what else do I have to do to make this switch besides cancelling my account with my current company? (After an overlap period, of course) What happens with my domain name--who will I pay to keep it? And finally, what simple things am I not thinking of?
Many thanks in advance to anyone with enough patience to read through this, and still find time to provide some assistance.

You can design your site in iWeb and upload it to either .Mac or a commercial server.
You would then provide the domain name registrar with your server ID number or, in the case of .Mac, your .Mac URL and instruct them to point your domain name in that direction.
.Mac is neither intended for, nor the best option, for a business site.
For example the company I host with - Host Excellence - allows you a free domain name registration and up to 6 sites with unlimited web mail and more server space than you are likely to need for about the cost of a .Mac account.
Commercial servers are a lot more reliable than .Mac, have wider bandwidth and usually have good tech support.
You only have to look at the number of problems in this forum concerning .Mac to see that tech support is not readily available from Apple.
I'm not putting down .Mac. I use it myself for various purposes and it is good for its intended use of one clicking publishing of personal websites.

Using Customized group name fields in Live Office

Hello everybody,
I've created a Crystal Reports based on a BEx Query and including a costcenter hierarchy. Now I want to add this report in Excel sheet via Live Office. I did this according to the official HowTos provided by Ingo Hilgefort. Now I've following issue. When I choose the data for the selected fields in Live Office, I could manage to insert the Live Office object into my report but the display of the cost center hierarchy nodes doesn't comply with the display in Crystal Reports. There I've defined a group with a customized group name field (costcenter.medium description) Live Office seems to use only the costcenter node ID.
Crystal Report:
Marketing und Vertrieb----
63     63     63     63     0     0
Vertrieb----
54     54     54     54     0     0
Vertrieb a----
1     1     1     1     0     0
Vertrieb a----
3     3     3     3     0     0
Vertrieb a----
4     4     4     4     0     0
Vertrieb a----
2     2     2     2     0     0
Vertrieb a----
2     2     2     2     0     0
Vertrieb a----
3     3     3     3     0     0
Vertrieb a----
2     2     2     2     0     0
Marketing----
34     34     34     34     0     0
Marketing a----
3     3     3     3     0     0
Live Office:
1000H1.1000H1000.1000H1300----
63      63     63     63     0     0
1000H1.1000H1000.1000H1300.1000H1310----
54      54     54     54     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3100-----1      1     1     1     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3105-----3      3     3     3     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3110-----4      4     4     4     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3120-----2      2     2     2     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3125-----2      2     2     2     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3130-----3      3     3     3     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3135-----2      2     2     2     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3140-----34      34     34     34     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3150-----3      3     3     3     0     0
How can I use customized group name fields in Live Office?
Thank you for helping me on my issue.
Regards,
Florian

live office uses web services to authenticate (dswsbobje) which depends on a java app server for kerberos to be enabled to login with AD. Is Infoview working with AD? This would be required. I'm not sure about your other issues.
Regards,
Tim

Using Multiple Domain Names to Access Our Portal

We operate one domain corp.company.com but all internal intranet web servers get assigned the address inside.ZZZ. The inside.ZZZ is on our IE exclusion list but company.com is not. Adding company.com seems to be a miserable task so we are looking at adding an alias so our users can access the server at the new inside.ZZZ url. We have DNS pointing the URL to the right server and that seems to be working properly.
Something within the application is redirecting the page to gnwhepdev.corp. company .com (our servers domain address) after the initial login. Since *.corp. company .com is not in the exclusion list, it is considered an outside address and rerouted. We are trying to find some way to pass the alias within the application itself so that we dont need *.corp. company .com in the exclusion list and we can point users to the inside.ZZZ url.
Our team researched this issue and found documentation that supported the use of multiple domain names to access a Enterprise Portal. The documentation that we found is below:
How ToConfigure the J2EE Engine Deployment Descriptor (Version 1.00 July 2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0eb8120-b66c-2910-5795-894f384fc054
Particularly on page 13-15 in the documentation it talks about enabling the portal via multiple domain names (Section 3.7: Using Multiple Domain Names to Access the Portal). Also, the documentation says the following:
You must have sever proxy servers, each with a different domain name. You then activate the filter mechanism and configure it to work with several proxy servers
We have several questions about the possiblities of being able to set this up and whether it would require another server where Web Dispatcher would need to be installed for this configuration to work properly. Can someone please provide some insight into what needs to be configured and answer the question about the Web Dispatcher? Also, if Web Dispatcher is required, what steps need to be done to configure? If Web Dispatcher is not needed, what will we need to do apart from that to set this up for our Enterprise Portal system?

It is but you have to use masking......
http://iwebfaq.org/site/iWeb_Domains.html

I want to know how to use my domain name in business catalyst

please I want to know how to use my domain name in business catalyst

Hello marionussen,
This issue of your's is specific to Buisness Catalyst and me have a forum for Buisness Catalyst. I would suggest you to post your query to forum: http://forums.adobe.com/community/business_catalyst for help.
Let me know for any further query.
Regards,
Ratandeep Arora

New issue breaking Gmail when using custom domain name

Similar Messages

Maybe you are looking for