New issue in af:query

Hi!!
I am using jdeveloper 11.1.1.5
I had dragged and dropped EmployeesVO as a af:table
I had have an af:quickQuery and af:query so that if the user clicks the af:quickQuery Advance button it navigates to the af:query button
The Problem persist is
If i performing serach operation by entering the value and pressing search in af:quickquery it doent perform its operation if i refersh the page manually by pressing F5 it works!!
This problem only occurs in af:quickquery in af:query it works fine!!
Could anyone pls help me!!

Now i had dragged and dropped my AllQuerryable Attributes in my jspx page as adf:QuickQuery Panel
The search operation had not performed in this also!!!

Similar Messages

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to re-issue an SQL query in java code in deadlock situation ?

Hi all..
I have a java application (in Struts) which is running on JBoss 4.0.1 server. The database is MySql 6.0. It is an
application made to be used among multiusers. The background operating system is Windows Vista.
Now a days i am facing a peculiar problem due to which the further things go wrong. I am getting following error :
com.mysql.jdbc.exceptions.MySQLTransactionRollbackException: Deadlock found when trying to get lock; try restarting transaction
I searched over forums and i got response as restart the transaction in deadlock.
In my java code it is a delete query where i get such exception when multiple users are accessing the application. What i tried for time being is as follows :
Statement stmt = null;
String temp = null;
Connection conn = null;
String sUserID =(String) session.getAttribute("username")
try
conn = DBConnection.getJndiConnection();
stmt = conn.createStatement();
temp = "Delete FROM temptable where Login ='"+sUserID+"'";
System.out.println("QUERY:"+temp);
int rowCount = stmt.executeUpdate(temp);
System.out.println("Rows affected in try ="+rowCount+" for user :"+sUserID);
// in catch i re-issue the delete query in deadlock..
catch (com.mysql.jdbc.exceptions.MySQLTransactionRollbackException ne)
System.out.println("Error ....Deadlock occured for user: "+sUserID);
ne.printStackTrace();
try
int rowCount = s.executeUpdate(temp);
System.out.println("Rows affected in catch ="+rowCount+" for user :"+sUserID);
catch (Exception e)
System.out.println("Exception again after restarting transaction..with user :"+sUserID);
e.printStackTrace();
(all necessary imports are present in code)
Here i am properly establishing the database connection with the help of other class DBConnection. As most of the forum insisted to re-issue the transaction, i have tried upto one level with above code. But still the problem is just partially solved.
How can i write my code so that every time if there is MySQLTransactionRollbackException , then the delete query should be re-issued again and again untill the transaction is complete.
Can i use GOTO statement ? or is it bad programming practice?
What are the other possible ways ??
Can someone please help in this regard ??
Thanks in advance..
Regards
Prasad

Hi all
i am new for these kind of databae transaction operation i am getting following error
/resetattendancedata.dqlMessage: Deadlock found when trying to get lock; Try restarting transaction, message from server: "Lock wait timeout exceeded; try restarting transaction" Cause: null Error Message: Deadlock found when trying to get lock; Try restarting transaction, message from server: "Lock wait timeout exceeded; try restarting transaction" Cause: null Error code: 1205 Error state: 41000 java.sql.SQLException: Deadlock found when trying to get lock; Try restarting transaction, message from server: "Lock wait timeout exceeded; try restarting transaction"
Here is my code i have written
if(movements.equalsIgnoreCase("ON"))
System.out.println("Movement");
if(submovements.equalsIgnoreCase("statusonly"))
query="";
query="UPDATE TRNMOVEMENT SET PROCESSED='N',STATUSPUT='N',ATTDATE=NULL,TIMEDIFF='' "
+"WHERE ATTDATE BETWEEN '"datefrom1"' AND '"dateto"' AND EMPID IN "
+"(SELECT SYSEMPID "
+"FROM (((MSTPERSONALDETAILS PD LEFT JOIN MSTCATEGORY CAT ON PD.CATEGCODE=CAT.SYSCATEGCODE)"
+"LEFT JOIN MSTUNITDETAILS U ON PD.UNITCODE=U.SYSUNITCODE) "
+"LEFT JOIN MSTDESIGNATION DES ON PD.DESIGCODE=DES.SYSDESIGCODE) "
+"LEFT JOIN MSTDEPARTMENT DEP ON PD.DEPTCODE=DEP.SYSDEPTCODE "strFltrString" ) ";
leaveStmt.executeUpdate(query);
leaveStmt.executeUpdate("commit");
else if(submovements.equalsIgnoreCase("flagstatus"))
query="";
query="UPDATE TRNMOVEMENT SET PROCESSED='N',STATUSPUT='N',ATTDATE=NULL,FLAG='',TIMEDIFF='',BREAK='N'WHERE ATTDATE BETWEEN '"datefrom1"' AND '"dateto"' AND EMPID IN (SELECT SYSEMPID FROM(((MSTPERSONALDETAILS PD LEFT JOIN MSTCATEGORY CAT ON PD.CATEGCODE=CAT.SYSCATEGCODE) LEFT JOIN MSTUNITDETAILS U ON PD.UNITCODE=U.SYSUNITCODE) LEFT JOIN MSTDESIGNATION DES ON PD.DESIGCODE=DES.SYSDESIGCODE) LEFT JOIN MSTDEPARTMENT DEP ON PD.DEPTCODE=DEP.SYSDEPTCODE WHERE EMPID IS NOT NULL "strFltrString" ) ";
leaveStmt.executeUpdate(query);
synchronized(leaveStmt)
//leaveStmt1.executeUpdate("set TRANSACTION ISOLATION LEVEL REPEATABLE READ"); // setting transaction level using SQL
// leaveStmt1.executeUpdate("start transaction"); // Starting a transaction using SQL
query1="DELETE FROM TRNDAILYATTENDANCE WHERE ATTDATE BETWEEN '"datefrom1"' AND '"dateto"' AND EMPID IN (SELECT SYSEMPID FROM (((MSTPERSONALDETAILS PD "
+"LEFT JOIN MSTCATEGORY CAT ON PD.CATEGCODE=CAT.SYSCATEGCODE) LEFT JOIN MSTUNITDETAILS U ON PD.UNITCODE=U.SYSUNITCODE) LEFT JOIN MSTDESIGNATION DES ON PD.DESIGCODE = DES.SYSDESIGCODE )LEFT JOIN MSTDEPARTMENT DEP ON PD.DEPTCODE=DEP.SYSDEPTCODE WHERE EMPID IS NOT NULL "strFltrString" )";
//leaveStmt.addBatch(query1);
leaveStmt.executeUpdate(query1);
synchronized(leaveStmt)
query2="UPDATE TRNLEAVEAPPLICATION SET TAKENTOATT='N' WHERE '"datefrom1"' BETWEEN FROMDATE AND "
+"TODATE AND '"dateto"' BETWEEN FROMDATE AND TODATE AND EMPID IN (SELECT SYSEMPID FROM (((MSTPERSONALDETAILS PD LEFT JOIN MSTCATEGORY CAT ON "
+"PD.CATEGCODE=CAT.SYSCATEGCODE) LEFT JOIN MSTUNITDETAILS U ON PD.UNITCODE=U.SYSUNITCODE) LEFT JOIN "
+"MSTDESIGNATION DES ON PD.DESIGCODE=DES.SYSDESIGCODE) LEFT JOIN MSTDEPARTMENT DEP ON PD.DEPTCODE=DEP.SYSDEPTCODE WHERE EMPID IS NOT NULL "+strFltrString +") ";
//leaveStmt.addBatch(query2);
//leaveStmt.executeBatch();
leaveStmt.executeUpdate(query2);
//} // end of for loop
else
leaveStmt.executeUpdate("commit");
Please Solve my problem for this error thanks in advance........

Issue when execute query in JAVA portal

Hi all,
I aways used the Query Designer 3.x and now im using the Query Design and i know that run with JAVA portal. So I have new issues and it not expected.
When I run RSRT and select a query I have no problems running by ABAP but when I select JAVA Web i had issue.
I know that JAVA give the addres:
http://MACHINE:PORT/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.....
but in my case only give me:
/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.....
Anyone have some idea?
Thanks in advice
Ralph

Hello,
Let me understand the issue.
When you click on Java Web (RSRT), the browser opens the following URL "/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom....." ?
Download the note 937697 and follow the instructions. Maybe the BI Master data is not configured on your portal.
This note will detects the inconsiste and suggest a solution.
Also, there is a table which you have to maintain the Portal server name.
TABLE: RSPOR_T_PORTAL
Check if exist a default portal on this table.
Thanks...
Edward John

Create new variable in a query using if

Is it possible to create a new variable in a query based on an if statement.
eg select A, B, C from table where condition
C is the new variable and should have a value of 10 if A is > 100 and a value of one if A > 100 and B < 200 for example.

Yes. Why not.
select a,
         b,
         case
             when a> 100 then
                10
             when a> 100 and b<200 then
               1
          end c
from table
where <condition>;Regards.
Satyaki De.

Performance issue while generating Query

Hi BI Gurus.
I am facing performance issue while generating query on 0IC_C03.
It has a variable as (from & to) for generating the report for a particular time duration.
if the variable (from & to) fields is filled then after taking a long time it shows run time error.
& if the query is executed without mentioning the variable(which is optional) then the data is extracted from beginning to till date. the same takes less time in execution.
& after that the period has to be selected manually by option keep filter value. please suggest how can i solve the error
Regards
Ritika

HI RITIKA,
WEL COME TO SDN.
YOUHAVE TO CHECK THE FOLLOWING RUN TIME SEGMENTS USING ST03N TCODE:
High Database Runtime
High OLAP Runtime
High Frontend Runtime
if its high Database Runtime :
- check the aggregates or create aggregates on cube and this helps you.
if its High OLAP Runtime :
- check the user exits if any.
- check the hier. are used and fetching in deep level.
If its high frontend runtime:
- check if a very high number of cells and formattings are transferred to the Frontend ( use "All data" to get value "No. of Cells") which cause high network and frontend (processing) runtime.
For From and to date variables, create one more set and use it and try.
Regs,
VACHAN

New Yorker App No Longer Sees New Issues

Beginning with the October 7 issue, the New Yorker app on my iPad no longer "knows" about new issues. Before that I used to get notified when a new issue was available and the new issue's cover would appear in the Library.
In order to download new issues I have to:
Delete the New Yorker app from my iPad
Download the New Yorker app from the App Store
Download the new New Yorker issue
Redownload any previous issues that I want to have on my iPad.
Obviously, this is tedious, time consuming and stupid.
The New Yorker app on my iPhone works fine. I get notified of new issues and new issues appear in the Library.
I have no other issues with my iPad. I'm on iOS 7.0.2. I'm on WiFi with a decent connection. I have tried restarting the iPad and resetting it. No joy.
Does anyone else have similar problems?

Same problem and from the same issue. I'm in India, wonder if it's a geographical issue.

OS X 10.8.3 - Should I keep my heads up in regards to any new issues?

Hello,
Since OS X 10.8.3 has been released to the general public, I am wondering if there's any new issue that this update may be bringing to the table when compared to OS X 10.8.2 (build 12C60)? Honestly, my 10.8.2 installation has not been problematic in my system. What worries me about this new update is that Apple apparently changed some graphics drivers for Nvidia cards along other major changes.
On my end, I am trying to mitigate any issues by installing the Combo update instead of the Mac App Store Software Update version and Delta updater.
Thanks for your assistance...
If you are having issues please state the following...
How did you installed OS X 10.8.3? (Answers: Via Mac App Store; Using Combo Update; or Using Delta Update)
What's the issue?; Or have you seen any performance and stability improvements?
Thanks Again!

As I can see, OS X 10.8.3 updates near all OS X applications and drivers, including the graphic card ones, but always for better.
I installed OS X 10.8.3 from the Mac App Store (249 MB, much smaller than other OS X updates), and at the moment, I haven't noticed any problem. Furthermore, I feel my Mac faster, and the big difference is with Safari. Before upgrading, Safari was terrible, and now, it works properly without any problem. Now, with OS X 10.8.3, it looks like there are some problems with the Boot Camp drivers download, that could be related to the fact that some Macs aren't compatible with Windows 8, so they can only download the Boot Camp drivers for Windows 7.
You should make a Time Machine backup of your system and update to 10.8.3 from the Mac App Store. That's the best way to install an update, always making a backup before updating, to prevent problems

Issue with the query

Hi Friends,
I am having a problem with this query. The query is to fetch all the elements for the employees. The elements that need to be fetched are set up in the flex sets.
In the table fnd_flex_values there are columns start_date_active and end_date_active fields and these are null. In the below query when I use the condition
and trunc(sysdate) between NVL(ffv.start_Date_active,TO_DATE('01-JAN-1951','DD-MON-YYYY')) and NVL(ffv.end_Date_active,TO_DATE('31-DEC-4712','DD-MON-YYYY'))
the query fetches the results in 5seconds
but when I replace the same query with the statement
and to_date(to_char(ppa.date_earned,'DD-MON-YYYY'),'DD-MON-YYYY') between NVL(ffv.start_Date_active,TO_DATE('01-JAN-1951','DD-MON-YYYY')) and NVL(ffv.end_Date_active,TO_DATE('31-DEC-4712','DD-MON-YYYY'))
the query takes a lot of time. Infact it gets timed out
Columns start_date_active and end_date_active fields are date type. Can anyone say what is the issue with this query
When I give the sysdate instead of ppa.date_earned date
select papf.person_id, papf.full_name, papf.employee_number
,petf.element_name, pivf.name,
prrv.result_value, ppa.date_earned,ppa.effective_date, to_char(ppa.date_earned,'DD-MON-YYYY') date_earned, paaf.assignment_id, petf.effective_start_date
,petf.effective_end_date, ffv.*
from per_all_people_f papf
,per_all_assignments_f paaf
,pay_payroll_actions ppa
,pay_assignment_actions paa
,pay_element_types_f petf
,pay_input_values_f pivf
,pay_run_results prr
,pay_run_result_values prrv
,per_person_type_usages_f pptuf
,per_person_types ppt
,fnd_flex_values ffv
,fnd_flex_value_sets ffvs
where 1=1
and papf.person_id = paaf.person_id
and trunc(ppa.date_earned) between trunc(papf.effective_start_date) and trunc(papf.effective_end_date)
and trunc(ppa.date_earned) between trunc(paaf.effective_start_date) and trunc(paaf.effective_end_date)
and paa.assignment_id = paaf.assignment_id
and paa.action_status='C'
and ppa.payroll_id = 61
--and ppa.consolidation_set_id = 108
and ppa.payroll_action_id = paa.payroll_action_id
and prr.assignment_action_id = paa.assignment_action_id
and prr.element_type_id = petf.element_type_id
-- and trunc(ppa.date_earned) between trunc(petf.effective_start_date) and trunc(petf.effective_end_date)
and trunc(sysdate) between petf.effective_start_date and petf.effective_end_date
and prrv.run_result_id = prr.run_result_id
and prrv.input_value_id = pivf.input_value_id
and     prr.status in ('P','PA')
and pivf.name ='Pay Value'
and ppa.date_earned between pivf.effective_start_date and pivf.effective_end_date
and ppa.time_period_id=145
and paaf.person_id = pptuf.person_id
and pptuf.person_type_id = ppt.person_type_id
and ppt.user_person_type = nvl('Employee',ppt.user_person_type)
and trunc(ppa.date_earned) between pptuf.effective_start_date and pptuf.effective_end_date
and petf.element_name = ffv.flex_value
and ffv.flex_value_set_id = ffvs.flex_value_set_id
and ffv.enabled_flag ='Y'
and ffvs.flex_value_set_name='GROUP_ELEMENTS'
and trunc(sysdate) between NVL(ffv.start_Date_active,TO_DATE('01-JAN-1951','DD-MON-YYYY')) and NVL(ffv.end_Date_active,TO_DATE('31-DEC-4712','DD-MON-YYYY'))
-- and trunc(ppa.effective_date) between nvl(ffv.start_Date_active,trunc(ppa.effective_date)) and NVL(ffv.end_Date_active,trunc(ppa.effective_date))
-- and to_date(to_char(ppa.date_earned,'DD-MON-YYYY'),'DD-MON-YYYY') between NVL(ffv.start_Date_active,TO_DATE('01-JAN-1951','DD-MON-YYYY')) and
order by ffv.parent_flex_value_low, papf.employee_number;
Thanks

ʃʃp wrote:
/* Formatted on 2012/06/11 13:34 (Formatter Plus v4.8.8) */
SELECT DISTINCT fr_ir_code, fr_fc_code1, product1, param_rep_prd, no_of_links_start_ir, no_of_supps_start_ir
           FROM comm_exst_rp_comit_aggr_irview
          WHERE fr_ir_code = 'AS01'
            AND srta_period = 2
            AND srta_year = 2011
            AND param_rep_prd = '2011-2'
            AND DECODE (:bind_variable, 'All', 1, 0) = DECODE (:bind_variable, 'All', 1, 1)
       GROUP BY fr_ir_code, fr_fc_code1, product1, param_rep_prd, no_of_links_start_ir, no_of_supps_start_ir
UNION
SELECT DISTINCT fr_ir_code, fr_fc_code1, product1, param_rep_prd, no_of_links_start_irda AS no_of_links_start_ir,
                no_of_supps_start__irda AS no_of_supps_start_ir
           FROM comm_exst_rp_comit_aggr_irview
          WHERE fr_ir_code = 'AS01'
            AND srta_period = 2
            AND srta_year = 2011
            AND param_rep_prd = '2011-2'
            AND da_status = 'N'
            AND DECODE (:bind_variable, 'All', 1, 0) = DECODE (:bind_variable, 'All', 0, 0)
       GROUP BY fr_ir_code, fr_fc_code1, product1, param_rep_prd, no_of_links_start_irda, no_of_supps_start__irdaYes Union is one of the best solutions for handling two queries.
As per my understanding DECODE function use is:
DECODE (value,<if this value>,<return this value>,
<if this value>,<return this value>,
<otherwise this value>)
But I am little bit jumbled for understanding below two lines in the query..
1)
AND DECODE (:bind_variable, 'All', 1, 0) = DECODE (:bind_variable, 'All', 1, 1)
2)
AND DECODE (:bind_variable, 'All', 1, 0) = DECODE (:bind_variable, 'All', 0, 0)Can you please tell me how the comparision is done using DECODE function?

Issues with Bex query structures and Crystal Reports/Webi

Hi experts,
I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
Budget $
Budget %
Actual $
Actual %
Budget YTD
etc
if I drag the structure into the Crystal Report detail section with a key figure it displays like this
Budget $     <null>
Budget %     <null>
Actual $     300
Actual %     85
Budget YTD     250
the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
Actual $     300
Actual %     85
Budget YTD     250
Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
Business Objects Edge 3.1 SP2
SAP Int Kit SP2
OS: Linux
BW 701 Level 6
Crystal Reports 2008 V1
Thanks
Keith

Hi,
Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
ingo

New issue breaking Gmail when using custom domain name

I have been using my own domain name in conjunction with Gmail since the launch of Gmail. The use case is fairly straightforward -- I have my own domain name and have created an email address alias on this domain ("custom email address') that forwards email to my Gmail account. I have configured Gmail to override the From field with this custom email address. With this configuration, Gmail is happy.
On my Z10, I had created a Gmail email integration account via the Advanced Settings with my custom email address in the "email address" field and my gmail email address as the username with the appropriate gmail server settings. When I continue from the advanced screen, I was taken to the Google account login screen where I grant permissions for my BlackBerry to access my account. On this screen, I logged in using my gmail email address. This worked fine and I received email without incident on my Z10 since I bought it on the Feb launch date ... until this past weekend. My Z10 then suddenly reported that my settings had changed and nothing I could do could convince it to accept the above settings as correct.
If you have a similar configuration and have noticed recent issues, there is a solution. This new "issue" appears to be that when you log into the Google permissions screen during the BB10 email account configuration process (i.e. the Google login page after you enter all the server settings in Advanced section of BB email account setup), you are no longer allowed to enter a username that differs with the custom email address you are setting up. It won't ever tell you that this is the problem. You just get a vague email settings error at the end of the process and you can't get your mail. It is possible that Google is the one who introduced this glitch, since the solution is within your Google account configuration, not BlackBerry. Simply put, you must associate your custom email address with your gmail account login within Google.
To do this, log in to Gmail using your usual gmail address. Click on your Gmail address in the top right corner, select the "Account" link in the drop down. Click the "Edit" link to the right of the Email heading. At the bottom of this edit page add your custom email address in the field next to the label "Add a new alternate address". After you add it, you will need to verify this address via an email that will be in your Gmail account. I probably should have done this long ago, but never had the need to until now.
Now you can get BB email working again. Go back to the BB10 account settings page for your Gmail account. This time when are kicked over to the Google login page to grant permissions to your BlackBerry to access your account, use your custom email address as your Google username and use your usual Gmail password.

Amazing, Thanks !

Newstand - how to see which magazines have new issues?

I have an icon with the new editions availabe (eg 2 new issues in the newstand app) but then I cannot see of which magazine it is related to (i have like 40 maganize apps). how can I solve this (ipad) thanks

Read more about statspack or AWR in Oracle documentation.

In-app purchase approved for sale, folios published, why would new issue not show in Newstand?

Has anyone had this issue and what should I be looking for to problem solve?

Yes - I am having this problem as well. And if I delete the app and install it again - the new issue will appear in the newsstand... I am using an iPad 2 with OS 6.1.3 installed
I have gone through this and everything is correct...
http://helpx.adobe.com/digital-publishing-suite/kb/troubleshoot-newsstand-background-downl oading-digital.html
I am wondering if this might be the problem...
In the DPS App Builder, under advanced options - there are 2 settings (which are both unchecked in my app)
"Always open background downloaded issue"
"Auto download latest entitled folio on first launch"
I am wondering if these should be checked and if this affects my newsstand icon not updating...

Authorization issue for Jump query from Summary to Detail

Hello Gurus,
I am facing an interesting issue in Jump query authorization.
I have a query on a summary cube which has Company code as a authorization relevant object .From this query I launch a query on detail cube.This details cube has company code and customer as authorization relevant objects.Customer is present in free characteristic for this query.Summary cube doesnt have the customer object at all.
                 When the user drillsdown on the Customer level in the details query he get the authorization error.After this if he just refreshes the query it works fine .
                   Can anybody please suggest any innovative workaround for this issue.
Gautam

Hello Gurus,
I am facing an interesting issue in Jump query authorization.
I have a query on a summary cube which has Company code as a authorization relevant object .From this query I launch a query on detail cube.This details cube has company code and customer as authorization relevant objects.Customer is present in free characteristic for this query.Summary cube doesnt have the customer object at all.
                 When the user drillsdown on the Customer level in the details query he get the authorization error.After this if he just refreshes the query it works fine .
                   Can anybody please suggest any innovative workaround for this issue.
Gautam

Exceptional aggregation on Non *** KF - Aggregation issue in the Query

Hi Gurus,
Can anyone tell me a solution for the below scenario. I am using BW 3.5 front end.
I have a non cumulative KF coming from my Stock cube and Pricing KF coming from my
Pricing Cube.(Both the cubes are in Multiprovider and my Query is on top of it).
I want to multiply both the KF's to get WSL Value CKF but my query is not at the material level
it is at the Plant level.
So it is behaving like this: for Eg: ( Remember my Qty is Non-*** KF)
               QTY PRC
P1 M1      10     50
P1 M2       0     25
P1 M3      5      20
My WSL val should be 600 but it is giving me 15 * 95 which is way too high.
I have tried out all options of storing the QTY and PRC in two separate CKF and setting the aggregation
as before aggregation and then multiplying them but it din't work.
I also tried to use Exceptional Aggregation but we don't have option of ' TOTAL' as we have in BI 7.0
front end here.
So any other ideas guys. Any responses would be appreciated.
Thanks
Jay.

I dont think you are able to solve this issue on the query level
This type of calculation should be done before agregation and this feature doesnt exist in BI 7.0 any longer. Any kind of exceptional aggregation wont help here
It should be be done either through virtual KF (see below ) or use stock snapshot approach
Key figure QTY*PRC should be virtual key figure. In this case U just need to one cbe (stock quantity) and pick up PRC on the query run time
QTY PRC
P1 M1 10 50
P1 M2 0 25
P1 M3 5 20

New issue in af:query

Similar Messages

Maybe you are looking for