New Item category Determination in delivery

Hi Experts ,
I want new item category to be determined in delivery i did all the customisation for Del Item category to be determined in IMG ,any suggestions in this .
Regards
VKS

Hi,
You have to define the new item categories for the deliveries in the IMG
path:
IMG-->LOGISTICS EXECUTION-->SHIPPING-->DELIVERIES-->DEFINE ITEM CATEGORIES
After defining the Item categories yo have to assing the item categories to the delivery documents in the IMG
Path:
IMG-->LE-->SHIPPING-->DELIVERIES-->DEFINE ITEM CATEGORY DETERMINATION IN DELIVERIES
here you have to assign the default item categories for the
DELIVERY DOCUMENT TYPE
ITEM CATEGORY GROUP
USAGE
HIGHER LEVEL ITEM CATEGORY
for the above combination assign the default item category and save
Now the item category will be atomatically determined in the transaciton of delivery creation once you create the delivery
Please check the above settings and revert
thanks,
santosh

Similar Messages

User exit -Item Category Determination for a Home Delivery Shipping Condn

Hi All
1.     A Standard Order is created in ECC and if the shipping condition is HOME DELIVERY the default site that gets determined will be a HUB and if it is an UPS shipping condition the default site that gets determined is the PDC
2.     The default Item category determined for the delivery relevant items (Box1 and Box2) will be ZSNP which is fine if the Shipping condition is UPS and the site is PDC.
3.     However if the Shipping condition is HOME DELIVERY and the site is a HUB then the ZSNP Item Category has to be flipped to ZTBB which then will determine the correct Schedule line category ZB and triggers the IPO process. This in turn auto creates a purchase requisition on the PDC when the Sales Order is saved
plz help
thnx
rohit

Hi Lawrence Tam,
         If you are going to create a new item category usage to determine an item category, you need to add a new line in transaction VOV4 for the new combination of sales document type + Item Cat. group + usage + high leve item cat. to determine the item category.
Thanks in advance,
Mariano.

What is the use of usage in item category determination?

Hi Gurus,
What is the use of usage in item category determination? pls give examples.
Thanks,
Paul

Hi John,
Assign Item Categories
In this menu option, you can specify which item categories the system proposes during document processing for each sales document type and item category group. At the same time, you can specify additional item categories with which the system default can be overwritten. There is a maximum of three possible alternative item categories.
If, for example, you enter a material with the item category group NORM in a standard order, the SAP System determines the allowed item category via the assignment of item categories to sales document types and item category groups.
The system default and the allowed alternatives are always determined from the sales document type and one or two further criteria. The system default depends on the following criteria:
sales document type
item category group
item category of the higher-level item
item category usage
Note
The SAP System automatically copies the item category determined for a sales document item to the delivery.
Recommendation
Depending on the initial situation you can start the assignment differently:
When you define a new sales document type, you should specify the proposed and the allowed item categories for the materials that are represented by the item category group.
When you define a new item category, you should specify for which sales document types an item category is proposed or which item category is possible for the materials represented by the item category group.
When you define a new item category group, you are to enhance the assignment of item categories to sales document types by this new item category group.
Actions
To define item category determination, proceed, for example, as follows:
1. Choose the sales document type to which you want to assign item categories.
2. Then choose one of the item category groups.
3. Specify all the allowed item categories for the combination of sales document type and item category group.
If you are dealing with a non-material item, you must specify the corresponding item usage.
If it is a subitem, specify the item category of the higher-level item.
If it is an item category that is to be proposed in the sales document, you must indicate the combination of item category, item category group and sales document type as a default value.
4. If necessary, specify between one and a maximum of three item categories, with which the system default can be manually overwritten during document processing.
Thanks & Regards
Sasikanth.Ch

Reason for creating new item category

when should we create a new item category

HI premkumar
A rule of thumb in SAP is "Not to change the Standard Setting" Either it is Order document, item category,schedule line, pricing procedure, delivery type, billing type e.t.c.
Basically it depends on the BUSINESS REQUIREMENT,why we go for customization. 90% of the BR will not fit into SAP STANDARD setting. So, when u have to change any of the existing setting like creating a New sales order document for particular business only ( Foods business..) ( though we generally use TAN as standard item category ) we can derive a cusomtized one as per our needs.
BR needs may be:
1. New Partner Determination procedure
2. New Text determination procedure.
3. New pricing setup
4. New incomplete procedure.
there are a lot more to come. When your Business needs any change in the existing TAN setting, SAP gives u the flexibility of creating new Item category.
Also, if you start changing STANDARD setting ( TAN) as per your needs, SAP doesn't support it when u have some problems or any UPGRADE issue.
This is the real need of CUSTOMIZATION in any Business /CLIENT.
Hope this helps.

User Exits for Item Category Determination based on Item Category Usage

Hi Gurus,
If I need to create a new item category usage code and perform item category determination using the new item category usage code, is there a user exit or function module which is able to perform this?
Thanks & Regards

Hi Lawrence Tam,
If you are going to create a new item category usage to determine an item category, you need to add a new line in transaction VOV4 for the new combination of sales document type + Item Cat. group + usage + high leve item cat. to determine the item category.
Thanks in advance,
Mariano.

Item Category Determination for a service order

Hello experts;
I have the following funny issue, When i try to create a service order my item category doesn't get determined properly: specifically when i fill in the product in the SAP GUI the item category field doesn't get populated automatically...funny thing is that i do the exact same thing in the Web UI the very same field Does get populated correctly!
The following are the customizations i have on SPRO: The all thing is copied from the standard but in the GUI the standard doesn't work either! and it does in the WEB UI. Any lights????
Trans Type:ZSVO
Desc:DSGi Service Order
Item CtgGroup:NORM Sales Item (Norm)                                                                                Item Category:ZRVS
Desc:DSGi Product
Alternative Category: SRVS     Desc:Product

I don't get it...
It's as simple as that: the item i'm adding in the service order has Ctg Group DIEN and it was correctly downloaded from R3. The Item Category Determination is as follow:
Trans Type: ZRVO
Desc: DSG T Service Order
Itm Ctg Group: DIEN Service w/ Delivery                                                                                Item Category: ZTVS     Service Sales Item
Where ZTVS is the copy of the item category SRVS (Standard) which for some reason if i put instead of the ZTVS doesn't work either!
What am i doing wrong?

Item Category Determination during Sales Order Creation

Dear All,
This is Chee Wee, i'm new to SD, i would like to seek for an advice for the topic related to Item Category in Sales Order.
We have a material "Mat005" define as "Stocked" Item category in MM03,
*Stocked means our MM team will always keep stock for the material.
The document Item category assigned to this "Stocked" are "NoPo" --> No Auto Po creation and "AuPO" --> AutoPo creation.
During the SO creation for Mat005 with Qty50 and warehouse stock availale for 60, i'm wondering when i select the itemCat "AuPO", the system automatic changed to "NoPO", but when i change the order qty to 70, then i'm able to changed the itemcat to "AuPo"!!
Can any Guru advice me what is the actual setting or configuration behind to determine which are the correct Item Category that i can choose?
Thank you very much,
Regards,
Chee Wee

Dear Chee Wee,
Basically tem category will determine based on these key combination
Item category group(Material master)+Sales document type(We enter doc type in the creation initial screen)--->Item category
For Example NORM+OR--->TAN.
As per your explanation
I hope In your case stock availability also one of the factor in the item category determination.This might have done some enhancement.
There are two item categories in your process one is "NoPo" --> No Auto Po creation and second one is "AuPO" --> AutoPo creation.
the system automatic changed to "NoPO", but when i change the order qty to 70, then i'm able to changed the itemcat to "AuPo"!!
60 Qty Stock available, you have created sales order for 50 Qt here requirement is less than stock availability so system will not allow you to enter AuPo item category Because there no need of auto PO creation for stock.
When you created sales order for 70 Qty, stock available only 60 so there is shortage of 10 Qty.now system needs to allow to create Auto PO to procure the shortage stock of 10 Qty, so system is allowing you to enter Yaupon item category.
There might be some work around kind take help of ABAPer to get the more details about your item category determination.
I hope this will help you,
Regards,
Murali.

Item Category Determination in Deliveries against STO

Dear Guru,
In our STO process, there will always have a Outbound delivery created for this STO PO.
Actually my question is how the system deterermine the correct item category for the outbound delivery.
I checked through configuration under "Define Item Category Determination in Deliveries" or tcode "0184", from which i can find the conbination by "delivery type" + Item category group, but there are many different item category usage and default item category
As such, can anyone please advice me if there is any place where i can maintain the "item category usage" or "Default Item category" to allow the UB STO PO determine the correct item category.
thank you very much
Regards
Chee Wee

Dear Pankaj,
So sorry, i'm still not clear.
Actually for my client, they have a non-standard PO document type UB2 for the Stock transport order between 2 different plant and the physical address or location will determine by the storage location.
and the complete flow is STO PO--> Outbound delivery --> Inbound Delivery with Ref. with outbound Delivery
--> Goods Issue --> Goods Receipt
and understand from other post, the Mvt type to be use for the outbound delivery will be determine by the item category and Sales Order Schedule line.
For my case, the default Order type is YDL, and Item cat group in Sales Org view 2 is Norm, but for YDL + Norm conbination are many which having different Item catogory usage and Item category.
So how can i know which one the correct item category in "0184" which i can use it to determine the Sales order schedule line.?

Usage in Item category determination

Hi friends,
In delivery item category determination there will be in field called "Usage" . Delivery type will be coming from delivery document type, Item category group will be coming from material master. In the same way where from this Usage data will be coming. How come the system knows which is FREE, CHSP, Etc??
Can anyone explain me in detail please.
Ratna Kumar

Hi ramarao
Spro --> Sales and Distribution --> Sales --> Sales Documents --> Sales Document Item --> Define Item Category Usage
Item usage controls how the item category should behave during a document processing. Item usage controls the usage of the item. Item usage tells wheather it is a text item , free item , product selection item etc
We can maintain Item usage feild at CMIR also
Regards
Srinath

Item Category and item category determination

Dear Guru's,
I have BOM for one material. I have done the full cycle from sales order to billing, everything is fine. I have mainatined combination for item catergory determination as OR+ Norm =Taq and ORNormTaq=TAE. and also maintained copy controls.
The same i have maintained for Consignment porocess.
Now i am having problem in the cases return delivery,consignment pickup and consignment returns..
What are the combinations to be maintained.. What are the standard item categories and assignments to be maintained..
Regards,
CS

hello,
these are very basic question and can solved if you search over the net or ask your instructor to recommend any book.
coming to your question
item category determination in sales document is done via following rule
sales document typeitem categorygroupusage+higher level item cat=item cat det in sales doc
OR + NORM =TAN
SCHEDULE LINE CAT determination in ITEM OF A sales document is done via following rule
item category+mrp type=schedule line category
TAN +PD =CP
revert if helpful
Mohit Singh

Created new Item category, guidence required for assignment.

Dear All,
We have created new Item Category for Advance Booking, now we required guidence from you, in what combination we have to assign Item Category to Sales Order type. i.e.Sales Doc. Type-Item cat.group-Item usage-ItemCat-HgLvItm.
Please advice.
Regards
Prashant

Hello,
We have created new Item Category for Advance Booking, now we required
guidence from you, in what combination we have to assign Item Category to
Sales Order type. i.e.Sales Doc. Type-Item cat.group-Item usage-ItemCat-HgLvItm.
Important fieldsfor Item category determination process:
Define Item Categories*
Define Item Category Groups*
Define Default Item cat grp for Material Type*
Define Item Category Usage*
Assign Item Categories*
The method of assignment of item category is carried out in t-code VOV4 and please have a look into this t-code and you wil have the exact idea regarding the sequence/combination for item category determination.
Regards,
Sarthak

Returnable Packing - Sales order maintainance / Item Category determination

Gurus,
I have question about returnable packing regarding sales order entry and item category determination
1) Sales order : Should we do entry of returnable packing in Sales Order as a regular item
Example : The material M1 - 100unites needs returnable packing materials PK1 5 unites.
Therefore in sales order it should be entered as below
M1 - 100unites
PK1 - 5unites
Please commnet.
2) Item category determination should be done at sales document level
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (???) = TAL
Please commnet.
Regards,
Ashish

Hi
Yes Ashish you need to enter the returnable as a separate item in the sales order
For qn no 2 the item categories of higher levelitems can be TAN and TAX
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (blank) =TAL
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (TAN) =TAL
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (TAX)=TAL
Note returnable packing items are creates as a separate materials with material type as LEIH and item category group as LEIH
How to bring back the returnable packaging stocks to your plant
Creating a Returnable Packaging Pick-Up
Create a sales order using order type LA /AT.
Enter the required data on the customer, the returnable packaging, and the plant to which the materials are to be returned.
Enter all other relevant data and save the order.
Create a returns delivery for the sales order when the materials reach your company.
The system proposes delivery type LR automatically. The transaction is completed by the goods receipt posting which initiates a transfer posting from the customer's special stock to your plant stock.
Regards
Raja

Setting for new item category

Hi friends,
Company's requirement is to Create new Item Category and respective settings for normal business process.
please let me know, what all the mandetory setting which i need to do for normal business process.
As i know , item category determination in VOV4.
please tell me, the main mandetory setting which should be maintained.
thanks in advance.
VARMA

Dear Ravi Varma,
Please copy the standard ITEM CATEGORY based on your scenario and then save in VOV6.
Assign the same for your document type in VOV4.
Another important thing you have to keep in mind is you have to include this NEW ITEM CATEGORY in the copy controls as well.
(in VTLA & VTFL)
Please check and revert back.
Thanks & Regards,
Hegal K Charles

Usage in Free Goods Item category Determination

Hi,
I have configured the Free Goods and it is working fine and I had to utlize the SAP standard Usage "FREE" in the Free Goods Item category determination as per the below:
Sales Doc Type    It.Cat.Grp.     Usage   HLevItCat. DItemCat    MitCat
ZOR1                    NORM           FREE        ZAN1         ZANN
ZOR1                    NORM                            ZAN1         ZANN          TAX
I know this "Usage" is available in CMIR and I don't find it in any other places. So, if any materila for which there is no CMIR, then in that case where should I use this "Usage"? Because I want to change the standard SAP Usage "FREE" to "ZREE". How can I change it and assign it? Please guide me.
Thanks,
Jans

Hi,
Try to do as mentioned below.
step by step process for free goods.
1. need to create the free goods condition(condition tables/access seq and types) and pricing procedure and then assign the same to sales area, doc. Priccing proce and cust pri. Procde.
2.you need to maintain the condition records( tcode: VBN1) and maitain the data as mentioned
above(check Notes 2 sheet)
3. if you don't want the free goods item to be created, then you need to add the NRAB condition type to the pricing procedure(document pricing procedure not Free goods pricing procedure) and need to maintain the condition record for this
condition in VK11.
once all this is done, you can see free goods price reduced in the net price and if additional item is added, then you will the quantity (as per condition record) for that free good.
Thanks,
Srini.

Item category determination for Free Goods

Hi
I have configured inclusive Free Goods and have a second line correctly determined when I create a quotation or a sales order for a particular product.
However, I keep getting the error "Item 20: No item category could be determined".
I have created an entry in item category determination with TAN as my main item category and TANN as the item category for the free goods.
Any ideas?
regards
Tim

I forgot to specify that the usage was for Free Goods in the item category determination.
It now works.

New Item category Determination in delivery

Similar Messages

Maybe you are looking for