New item in menubar - need it gone now

Menubar items: dont remember which folder holds these items, does anyone recall ? I need to uninstall

that didnt work / wont work. Is that only for Apple installed items ? It does work with for example:
iSync
Keychain access
Internet Connect
Apple Remote Access
So again, does anybody know where the Menubar items are actually installed ? I want to remove these items from the folder where they get installed....
Cheers

Similar Messages

Wanted a new item to be released for Blanket PO instead of old item

Hi All,
I have a requirement :
A new item (B) is replaced for an old Item (A), ie the purchasing flags are disabled for the old Item (A).
And the item releationships for the Old and New Item are defined in inventory.
There are few Open Blanket PO's where the old item is present in the Po's,now we wanted to release a PO for the new item instead of old item in the PO.
Client don't want to update the new item to the old item.
Please let us know how to use this functionlality.And the steps /setups to achive this.
Thanks
Sreekanth

Hi Sreekanth,
I guess your requirement is not achievable...
As long as the item is present in BPA then the same item will be defaulted in Release...we cannot use new item here even touch we have item relationship.
if you require a new release for the new item then you need to create a new BPA.
I guess Item releation ship wont work here.
I tried to work it out thru sourcing rules by creating a BPA with old item and putting new item in assign sourcing rule window....but while releasing thru autorelease old item got defaulted in the new release.
HTH
-Arif.

My daughters computer crashed, got new one. Trying to transfer ipod to new computer only does some of content tells me I need to aurtherize computer my wife shared itunes with daughter that ipod is gone now and dont have password.

Trying to transfer ipod to new computer. It is telling me to autharize computer. Had another ipod on same account, it gone now. Don't have password or any info about it. What do I do?

The password is for your iTunes account. Not for your old iPod. Enter your Email and password will give you access to all the music you bought from iTunes. If you forget it then I dont know how to help you there guess your SOL.

My computer crashed. I now have a new one and I need to know how to sync my iPad without losing all the photos, contacts, podcasts, etc I have on my iPad.

My computer crashed. I now have a new one and I need to know how to sync my iPad without losing the photos, contacts, podcasts, apps, etc I have on my iPad. Can anyone help?

Downloading past purchases from the App Store, iBookstore, and iTunes Store
Some items cannot be redownloaded. You will need third-party software for them - Phone to Mac - Pod to Mac | Macroplant.com or Phone to PC | macroplant.com depending on your hardware.
You might consider modifying your profile information so we will know what your hardware, OS, etc. is. Makes it easier to provided assistance.

Cannot create new folders on desktop. Cannot drag new items onto desktop. Desktop in Finder opens with Terminal. Not sure if this has anything to do with upgrading to Mavericks but I need help if anyone has ideas. Thank you.

I can no longer create new folders on my desktop. The option to do that is now light gray on the drop down menu and can't be selected.
I cannot drag new items onto desktop any longer either.
The Desktop in Finder opens with Terminal.
Folders and items on Desktop open and work normally.
Not sure if this has anything to do with upgrading to Mavericks but I need help if anyone has ideas.
Thank you.

Take these steps if the cursor changes from an arrow to a white "prohibited" symbol when you try to move an icon on the Desktop.
Sometimes the problem may be solved just by logging out or rebooting. Try that first, if you haven't already done it. Otherwise, continue.
Select the icon of your home folder (a house) in the sidebar of a Finder window and open it. The Desktop folder is one of the subfolders. Select it and open the Info window. In the General section of the window, the Kind will be either Folder or something else, such as Anything.
If the Kind is Folder, uncheck the box marked Locked. Close the Info window and test.
If the Kind is not Folder, make sure the Locked box is not checked and that you have Read & Write privileges in the Sharing & Permissions section. Then close the Info window and do as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
xattr -d com.apple.FinderInfo Desktop
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You should get a new line ending in a dollar sign (“$”). Quit Terminal.
Relaunch the Finder.
If the problem is now resolved, and if you use iPhoto, continue.
Quit iPhoto if it's running. Launch it while holding down the option key. It will prompt you to select a library. Choose the one you want to use (not the Desktop folder.)

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working.

I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working. Adobe Acrobat has been a primary tool for accommodating memory problems after a brain injury. (A car ran me down while I was out getting exercise.) I installed the SSD because I needed my management of PDF files to run faster. I called tech support for help when the software first stopped working, but they needed me to give them a number from my original disks. Because of my disability, I've been having someone come in to clean, and the shelves where I kept my software packages were cleared. I've been hunting for them ever since, but I can't look for them myself for very long at a time. Today I finally found them, but now I can't seem to contact tech support. What happened? I don't want to delete my old files because I need the setup to remain unchanged, because I don't do well with changes. I think all I should need is to have someone located the license file on drive E: and move it to wherever it is needed on the SSD drive, but I don't know what to look for.

Tech support is not normally available on weekends. You should contact them as soon as the weekend passes and pick up where you left off with them.

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have manged to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the pr

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?

The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
David

Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Thanks

Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Yellow on white is harder to read. Thanks

Another question. How do you bookmark something. It was so easy before, why did they change it? Can I uninstall it?

I downloaded the new os7 on my Ipad mini. Now in order to use the ipad I need to use a passcode. I cannot get pass the login screen and I never set up my ipad to use a passcode. What can I do?

I downloaded the new os7 on my ipad mini. Now in order to use the Ipad, I need to enter a passcode. I cannot get pass this screen. I did
not set it up to use a passcode. What can I do? I am not too computer savy.

I have the same problem. I upgraded to iOS7, entered my usual passcode when prompted in setup, and when I tried to access my iPad after installation was finished it denied my passcode. I can't connect to any internet to erase it or anything because the new iOS hasn't yet been configured to a wifi network, so I can't backup from anything either.
When I connect the iPad to iTunes, it tells me that Find My iPad must be disabled on my iPad before backup or restore can continue - and I can't access anything beyond the lock screen of my iPad at all because it refuses to accept my passcode, so I can't get to Find My iPad.

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and g

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message

JQuery Tutorial needed to customize Add New Item and Edit Item forms

Hello,
I need a tutorial to use JQuery to customize the UI Screen of SharePoint to add a new item in a list.
since I don't have prior UI experience it will be nice if the tutorial is specifically targetted towards customizing the automatic form which is presented by sharepoint when we try to add an item to a custom lists.
val it: unit=()

Hi,
According to your post, my understanding is that you want to customize the New Item and Edit Item forms using jQuery.
The following examples for your reference:
http://ankursharepoint.blogspot.com/2012/10/jquery-for-tabbed-navigation-in.html
http://social.technet.microsoft.com/wiki/contents/articles/21730.sharepoint-2010-conditionally-hide-fields-on-standard-list-forms-using-jquery.aspx
https://www.nothingbutsharepoint.com/sites/eusp/Pages/10-jQuery-Snippets-for-SharePoint-2010.aspx
jQuery Tutorial
http://www.w3schools.com/jQuery/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

HT1338 Just bought a new iPod - says I need itunes 10.7 - downloaded it, now says I need to update my OS software. I go to update my OS software and it says I'm up to date - any advice?

Just bought a new iPod - says I need itunes 10.7 - downloaded it, now says I need to update my OS software. I go to update my OS software and it says I'm up to date - any advice?

Your Tag states you are running OS X 10.5.8 = Leopard... If this is the case... read on...
The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...

I need to re activate CS 4 Creative suite, normally I got a challenge code by telephone, and the software worked. Now it's impossible to speak someone by telephone, how can I activate my software on my new mac? I need a challenge code because it is an upg

I need to re activate CS 4 Creative suite, normally I got a challenge code by telephone, and the software worked. Now it's impossible to speak someone by telephone, how can I activate my software on my new mac? I need a challenge code because it is an upgrade version.

Try serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

i have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

This is not my problem. However, I think it may be related to an old speaker. I was using the 30 pin adapter for about a week after the upgrade to 7.1.2. But I think with the update the speaker won't work anymore. I will try with a new speaker system. Thank you for trying to assist.

New item in menubar - need it gone now

Similar Messages

Maybe you are looking for