New items not shown

Portal 3.0.8 - Solaris.
I'm adding item to my content area and everything looks good until the item is submitted. It is then not shown on my CA page.
If I create a new CA page the items will appear. But then the same thing happens all over again when adding new items.
Anyone have a clue ?

I was just over to my client and found some things out.
No, I did not clear my browser cache but set it to check the page on every visit. Items still invisible.
The items are invisible in both view and edit mode.
This client originally created a content area with the NLS params set for the wrong language (default which didn't handle swedish chars). They then created a new content area using the correct NLS params. All CA pages created for this new CA will render items invisible. Creating new CA pages will not change anything.
If setting the CA to use the CA page originally created for the first (default NLS) CA all items will be visible.
Are we homing in on the problem here ?
And yes, all this is done using the PORTAL30 user.

Similar Messages

  • How can I display the 11000+ "items not shown?"

    I have Elements 7 and running Windows 7 64bit. "Show all" only shows a couple of thousand photos and 11000+ "items not shown."  I have never stacked or hidden any photos.  I've tried everything.  The "show hidden" gives me 0 photos.  When I ask to show a tag of some of the missing photos, I again get 0. The photos are not shown in any of the views.  When I try to reimport the photos, it says they are already there. I need help desperately. I've put too much work into this organizer to start from scratch.

    Thanks for the reply and the terrific FAQ source.  I followed the directions suggested, but things actually got worse.  When I tried display all, I got 0 photos - nada - zip.  I kept messing around and finally success.  I tried so many combinations of things that I'm not sure which actually solved the problem, but I believe it was reconnect all.  I had tried this a couple of times before without success, but this time I deleted from the catalog all items elements couldn't find, even though I knew where they were.  Lo and behold all 13000 photos appeared.  BTW many of those are duplicates.

  • At bottom of screen '36 items not shown" comes and goes??

    Thanks is advance for your help.
    At the bottom of the Organizer screens it always says "972 items dated etc". But then depending on something I do, possibly with tags, it sometimes shows "36 items not shown"  for a total of 1008.   Note the View does not show any hidden files.  One thing I noticed is when I put just one photo in an album and click on the album it will say "1 item found 1007 items not found for a total of 1008.
    What concerns me most is that I have 36 photos floating around somewhere that I can't see.

    Thanks Brett; However, the View hidden files and edit visibility seem to be the exact same settings?   Are you referring to anything else when you mention the "hidden" attribute are you referring to anything else. The only choices oh both are to:  Show all files, show hidden files and hide hidden files. None of these choices including show all files seem to show all the files. Any other suggestions would be helpful.  Thanks much

  • New images not shown

    Hi,
    Apparently images that are not on the disk when a Java application starts but that are added on disk during program execution, are not shown on JLabels, JButtons, ...
    Anyone knows why?
    Taaje

    Dunno, coz it works 4 me. Y ! 4 u?
    import java.awt.*;
    import java.awt.event.*;
    import java.io.*;
    import java.net.*;
    import javax.imageio.*;
    import javax.swing.*;
    public class Example {
        public static void main(String[] args) {
            final File file = new File("temp.jpg"); //constructor doesn't create file in file system, right?
            final JPanel cp = new JPanel(new BorderLayout());
            JButton write = new JButton("write image file");
            write.addActionListener(new ActionListener(){
                public void actionPerformed(ActionEvent evt) {
                    try {
                        URL url = new URL("http://today.java.net/jag/bio/JagHeadshot-small.jpg");
                        ImageIO.write(ImageIO.read(url), "jpg", file);
                    } catch (IOException e) {
                        e.printStackTrace();
            JButton read = new JButton("attempt to read file and create label");
            read.addActionListener(new ActionListener(){
                public void actionPerformed(ActionEvent evt) {
                   try {
                       cp.add(new JLabel(new ImageIcon(ImageIO.read(file))));
                       cp.revalidate();
                       cp.repaint();
                   } catch (IOException e) {
                       e.printStackTrace();
            JPanel buttons = new JPanel();
            buttons.add(write);
            buttons.add(read);
            cp.add(buttons, BorderLayout.NORTH);
            cp.setPreferredSize(new Dimension(400, 300));
            JFrame f = new JFrame("Example");
            f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            f.setContentPane(cp);
            f.pack();
            f.setLocationRelativeTo(null);
            f.setVisible(true);
    }

  • SAP Inbox items not shown in UWL

    We are working on ESS , we have items in SAP Inbox and not shown in UWL for a employee.
    We are not able to login with the actual user. Is there any possibility to see UWL items of the item without his login?
    we have UWL connecters enabled for R/3 but still have problem for this user.

    Hi Kiran,
    If this is specific to one user or have you found same issue with others. To receive any workflow from backend system system need to be registered to UWL.
    Have a look at following threads for pointers
    /message/6018381#6018381 [original link is broken]
    /message/5093279#5093279 [original link is broken]
    /message/5093308#5093308 [original link is broken]
    Cheers,

  • New information not shown in the box view

    Hi Experts,
    I am working for a customer that has the requirement of creating a new box view.
    I am using NAKISA 4.0 SP1.
    I think that I have followed the correct steps in order to achieve this goal, but of course something is missing.
    This is the sequence that I have followed:
       1- Enhance the standard RFC /NAKISA/OC_OU_STRUCTURE for including a new output table and the corresponding code to fill it.
       2- Modify the OrgUnitHierarchyDataElement.xml specifying the new output table. The file is in the .delta/AppResources/dataelementconfiguration/ folder.
       3- Restart the server to make these changes visible from the admin console.
       4- Create the new xsl box template in the .delta/Templates_deployed.
    After doing all this steps, I have created a new view in my OrgChart using the new template and with a linked detail. The link field is orgeh. The problem is that I can't see the linked information in the box.
    Any suggestions?
    Thanks in advance.

    Sudha,
    Include the web item Text Elements and within that select the Variables you want to view.
    Regards
    Gill

  • Line items not shown in GLs

    Hi All,
    I have a problem with line item display.  When I am running FS10N for some of GLs, they are showing values in the report.  But when I drilldown for line items, it is not the value that is appearing same as a total as the overall balance.
    It is happenning over the years.  In the previous years I have such problem for those GL accounts.  I have run the program for line item display, but the output is nothing changed.
    Do anyone have idea to solve this issue.
    Regards,
    AJ

    Hi,
    Do the following things ...
    1. Run F.16 (Carryforward GL balances) from the previous years to current year .. say for example 2006 to 2007, then 2007 to 2008.  Then check the balances once again.
    Still if you issue is not resolved, then let me know ur R/3 version and support pack level, this information is required to provide further help.
    all the best
    Prasad

  • Items not shown  in Periodic Cost Update form

    Hi,
    I'm working with Periodic Average Cost, for a Colombia project. Instance is still in 11.5.10.2.
    The issue I have is that when I try to select an item to update periodic cost, the item is not retrieve from LOV. In the form the corresponding LE / Cost Group / Cost Type. Cost Group is associated to the Item Master Org.
    After checking, the LOV for items is not showing all my IMO items nor my IO items. It's showing the items for another IO (UK) which happens to be the IO #1 created after IMO
    The OU has its own IO under Standard Cost and the IO depends from IMO. The responsibility has profiles for correct SOB and OU.
    Does anyone know if there is any profile or setup used byt this form to deafult items' org? As it;s so far it seems we are missing a setup, but there is no reference in Metalink on similar issues
    Thanks in advance,
    Gerry

    Good day uzma
    abidi
    It has been long time since I used Webforms but it look to me like you are using the default options and if there is no data that return in the query then you will not see the PagerTemplate.
    1. execute the SP from the SSMS.
    2. make sure that you pass the correct @status while executing the SP from the ASPX.
    3. check the SQL Server profiler, what query the SQL Server got.
    4. Check if DataTable (dt) has data after filling it. else you do not get the "DataBind" part, and the PagerTemplate will not display.
    * The basic code look ok in fast review. I might missed something. You should monitor it and get the line that make the issue.
      Ronen Ariely
     [Personal Site]    [Blog]    [Facebook]

  • Item not shown for clearing

    Hi everyone,
    I have a question for you concerning strange behavior of the clearing for vendor accounts. This is what it is about: I have a vendor let's say 12345. On this vendor's account I have two postings. One is posted with doc type KR (Vendor Invoice) and posting key 31 and the other one is doc type SA (G/L posting) and posting key 21. Selecting the accounts open items in FLB1N TC gives me both open items. However, going to F-44 to clear account 12345 without any selection gives me only the debit posting on the account.
    Both items are of the same month (only some days difference in posting date, etc.) The amount is exactly the same in Doc. Currency and Local Currency.
    Has anybody got any hints for me how to fix this and clear the account?
    Thanks a lot in advance for your help!
    Best regards
    Martin

    Hi Tony,
    thanks for your reply. I have checked that. The items have no clearing date. I have viewed the account selecting open items at key date today. This gives me both line items in the FBL1N view. The line items definitely do not have any clearing information set. In F-44 I still see the debit posting only.
    Regards
    Martin

  • Recently created items not shown in finder.

    In an effort to replace the invaluable (IMO) recent item canned searches that were on the older Mac OSX finder sidebars, I've changed the settings of the "All My Files" folder to display by "last modified". Only problem is that it doesn't want to show InDesign files or pdfs. The pdfs will show up about 20 minutes after creation, but that's not very helpful if I've just created something I need to email to a client immediately. Granted, I can navigate through the finder windows to the file and drag it into an email, but it's a lot easier just to open the "Today" or "All My Files" folder and see recently created files right there. Is anyone else having this issue?

    You don't say how long ago you migrated. If it was very, very recently it may still be indexing. If not you may try reindexing as directed in Spotlight: How to re-index folders or volumes

  • Items not shown.

    Hi all,
    I developed an application in a user xxx.
    Later that user get corrupted and so i created another user and accessing the application created on xxx.
    My application template will be like this.,
    LOGO                      HEADING                       LOGOUTLINK
    TAB1      TAB2          TAB3
            I logged in as portal user and accessed my application,
    Everything is working fine except when i clicked TAB2 the LOGO,HEADING,LOGOUTLINK is not visible.
    For TAB1 & TAB3 it's visible.
    I logged in as new user.,
    Working fine but..for all 3tabs LOGO,HEADING,LOGOUTLINK is not visible..
    I can see all them in edit mode...and i think access settings is looking to be right..
    Please suggest me a solution for this...
    Regards,
    Paappu.

    glad that it worked out for you..
    - another way to do this is to make a navigation page. this may contain your organization's logo, heading and some useful links.
    then you create fresh pages containing at least two regions. the top region may contain the navigation page portlet as defined above, and the lower region/s may contain other portlets and content as you like. you might also use the multi-tab scheme in these regions.
    - there are several other methods too. you can create a portal page template and then incorporate it in your pages.
    hope that helps!
    AMN

  • New items not showing up until itunes is restarted.

    ok i'm starting to get annoyed now.
    i have ATV set to stream everything.
    now when i add items to itunes they don't show up until i close and re-open itunes. in v1.1 they showed up in ATV almost instantly.
    what's the deal with that.

    PC Defector wrote:
    sup Chenks...
    i know you're streaming... but what happens if you just click sync from iTunes (even though you're not syncing anything) does it update the library then?
    what about if you're under sources on the AppleTV and choose your computer again?
    These are obviously not solutions... just curiosity questions to see if it persists that way too. Or, put another way, is if restarting iTunes is the only way.
    haven't tried pressing sync, but i never had to press sync when using v1.1.
    in sources (now computers), i can remove the computer and then re-add it, but i need to go thru the process of entering the code etc.
    rebooting the ATV updates the library also, so it seems the dropping the library connection and adding it again (be it automatically or manually) will update the library.
    shouldn't need to do this though as previously it was fine.

  • Why do new items not appear in my library?

    I have noticed that new song, movies, etc. do not appear in my library under iTunes 10.7 I can see them in the Recently Added playlist, but not in my library. I just bought The Avengers. The digital copy downloaded and installed to my iTunes and I synced it to my iPad, but it is not in the library under Movies. Likewise the free MP3 Avengers Assemble album is not there. Apps I buy do show up in the list and do update.

    This happens when you apply a motion tween to a shape that
    wasn't converted to a symbol *first*. For
    reasons of organizing and managing a flash doc - always
    convert shapes/images to a symbol forst -
    then apply motion tweens.
    If you delete these "tween" symbols in the library - the
    animation on stage will be lost -
    animations (specifically symbols) reference the symbols in
    the library.
    Search help docs for "symbols" to learn how Flash works in
    this regard.
    ~~~~~~~~~~~~~~~~
    --> Adobe Certified Expert
    --> www.mudbubble.com
    --> www.keyframer.com
    ~~~~~~~~~~~~~~~~
    MarkSLC wrote:
    > In my Flash document library I noticed all these Tween
    entries ( Tween 1, Tween
    > 2, Tween 3, etc.). I didn't expressly create them or
    name them, they just
    > appeared. Can someone tell me what's up with this?
    Should I keep them? Delete
    > them? I'm pretty new at Flash. Thanks.
    >

  • My user defined menu items not shown up in Main Menu

    Hi,
    I have some my own menu items need to add into Main Menu list, it works fine but only issue is the screen flash lot. Since all the menu items are in the form called "Main Menu" form then I tried to use oForm.Freeze(true) and oForm.Freeze(false) before and after adding menu items. Now the weird thing is though the screen doesn't flash but i can't see the new added menu items in the Main Menu form. But I can see them under the system menu Modules menu. Any idea?
    Thanks!
    Lan

    Hi All,
    After check the SDK help, I found the reason. I need to call oForm.Update() after. Now it works well.
    Lan

  • URL item not shown

    I added an URL item in a folder, but when wieving the folder portal returns the following error:
    Error: Call to utl_http failed (WWS-32136)
    ORA-1: User-Defined Exception (WWC-36000)
    Using: IAS102, Portal 3.0.6.5 on Solaris.
    Thanx & Bye all
    Fab
    null

    I solved this problem.
    There is a table called wwv_things (portal30) where u can modify the column 'inplace' to '0' where the value is '1', then all works.

Maybe you are looking for