New itunes 11 not working on my pc
after install new itunes 11, my pc shows: MSVCR80.dll can not found, so i have no itunes to use sysc my phone, and can not re load older version of itune i used to have, what i should do now
See Troubleshooting issues with iTunes for Windows updates.
tt2
Similar Messages
-
New Itunes is not working because my imac is 10.6.8 need help ?
New Itunes is not working because my imac is 10.6.8 need help ....
Because you require Lion to run it. You should not have installed it.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
Identifier 5,1 or later.
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite- System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
i downloaded the new itunes and it will not work
this application has failed to start because MSVCR80.dll was not found. re-installing this application may fix this problem. and itunes was not installed correctly. please reinstall itunes. error 7 (windows error 126)
Many thanks, that's perfect.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
New iTunes still not working with 64 bit operating systems?
When will iTunes support advanced 64 bit operating systems...
Would seem that a next generation phone would work with the next generation of operating systems...iTunes does work with vista 64 bit. I can sync my iPod with it. It's the 'Apple Mobile Device Support' portion that is required by the iPhone that isn't working.
-
HELP!!! New itunes is NOT WORKING!
I've tried EVERYTHING. MSCONFIG, uninstall, reinstall, restore..I worked on this all day yesterday and I can't waste another day on this mess! I'm not totally stupid when it comes to computers..but I can not get this to work.
HEY APPLE - COME UP WITH A FIX! From all the post...I'm not the only one!
If anyone else has another idea...or something YOU KNOW works....please let me in on it! All the others things have been a waste of time thus far!!!I've tried EVERYTHING. MSCONFIG, uninstall, reinstall, restore..I worked on this all day yesterday and I can't waste another day on this mess! I'm not totally stupid when it comes to computers..but I can not get this to work.
HEY APPLE - COME UP WITH A FIX! From all the post...I'm not the only one!
If anyone else has another idea...or something YOU KNOW works....please let me in on it! All the others things have been a waste of time thus far!!! -
New IPAD - cannot swith on for first use as iTunes activation not working - unable to set up new account- new user
Go to iTunes.com/download
Download and install latest version of itunes on pc (if not working chance pc. That's what i did)
Register
Connect the iPad to the pc
Follow instruction on iPad
Ciao -
I just got a new laptop and itunes is not working I have tryed to reinstall it and do alomst everything and it's still not working. Help?
What do you mean "not working"? That could mean multiple different things.
If help is desired, be as specific as possible. -
Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please
Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom -
Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.
When I sync my MacBook Pro with my iPhone and iPad, the events set in both devices (iPhone & iPad) are not transfered to the iCal on my labtop. Events created in both devices are transfered and copied betwen them when I sync them with the iTunes app (through the MacBook Pro) but they are not trasfered/copied into the labtop (iCal). The events created in the iCal (on my MacBook) are tranfered to the devices as two events on same hour. One, with the description created on the iCal, and the other as a New Event (no description). This is happening since I installed the new OS X Lion last week.
I file a report and talked with an Apple Support Representative, but they could not help me. They have not receive any other reports on this matter. Do someone has confronted this issue. I need to find out how to solve this problem.
Regards,
JADHi Sydness,
Thank you very much for your help. It just worked fine. I have 4 macs in my company for 25 years (one is updated each year), and it is the first time I could not solve a problem for weeks. It gave me the opportunity to join this great community.
Charles
Sydness wrote:
I reset my SyncServices and the calendar sync worked perfectly after that.
I followed the instructions found here:
http://support.apple.com/kb/TS1627?viewlocale=en_US
Mac OS 10.7.1 - MacBook -
What if sync with new computer does not work?
logical connection to old with WindowsXP, 32 bit version of iTunes.
New is Windows7 with 64bit versionSyncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
If your iPod can't be recognized by Windows, try these tips: iOS: Device not recognized in iTunes for Windows -
Hello Team,
I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion.
Also, I am not being able to upgrade Mac OS X 10.7 to 10.7.4 or letest for lion.
I am facing following messages when I open itunes ( I down loaded and install new for 10.7)
Process: iTunes [463]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: 10.7 (10.7)
Build Info: iTunes-10702101~1
Code Type: X86-64 (Native)
Parent Process: launchd [273]
Date/Time: 2012-10-22 23:33:07.226 +0200
OS Version: Mac OS X 10.7 (11A390)
Report Version: 8
Interval Since Last Report: 4918 sec
Crashes Since Last Report: 2
Per-App Crashes Since Last Report: 2
Anonymous UUID: 3DE933E2-7A48-4840-91F4-7DC466ED9C26
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
0x102a96000 - 0x103c36fff com.apple.iTunes (10.7 - 10.7) <0CC47E12-134F-A9E1-7E4F-3EAC797C3050> /Applications/iTunes.app/Contents/MacOS/iTunes
0x7fff62696000 - 0x7fff626cb1ff dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2160BH, 160.04 GB
Parallel ATA Device: MATSHITADVD-R UJ-867
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x1d100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x022a, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
And Google chrome just keep loading the page for hours and nothing is appear on its browser. But safari and firefox working absolutly fine.
In addition, I have reboot computer as well but it never worked. Please help me in this occasion.
Eagerly waiting for your response on this issue.
Best Regards,You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.
-
Itune is not working in my laptop which is having windows 8 operating systems
itune is not working in my laptop which is having windows 8 operating systems after installing itune 64bits.
Dear Thomas A Reed,
Thank you so much for you reply. Is that possible to do the retore of my Mac without Disk. I have tried other Movie Disk as you mentioned and that worked properly. so now according to you my disk is not good.
Its really strange that i am using my installtion disk first time and it has no scratch but its not working. now I guess I have to replace new DVD with this one.
Thanks again.
Kind Regards,
Sghalay81 -
Windows Vista and iTunes does not work
First Time sorry for my bad English, I'm from Germany and my English is not the best.
I have the new Windows Vista but iTunes does not work good.
And I have to use it, to manage my music on my iPod.
When there will be a Vista compatibles Version of iTunes??
And when will come an 64-Bit Version?
Thanks for Help,
KarsteniTunes running under VISTA does not recognize media burned by iTunes Backup (v7.0.2) from a non-Vista machine.
The original machine recognizes the media just fine, but the new VISTA machine does not recognize the dvd at all.
Anyone else having a problem with VISTA recognizing burnt media? -
I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.
martinfromdevon wrote:
Warning to iPhone users. Do not start the update of the iPhone software using iTunes.
Nonsense, and very misleading advice. I've updated iPhone 3G, 3Gs,and 4 through itunes many times, never had a problem once, not with one single update in nearly 5 years of iPhones. Of course, I've never jailbroken my phones either. Hack your phone and have update problems? I've got news for you, the problems are not a result of iTunes or Apple's updates. -
it says that the download for the new itunes is not a valid Wn32 application. what do i do?
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?
Maybe you are looking for
-
So frustrating! I open the photo. Edit by cropping, adjusting color, etc. It's perfect. I click DONE and move on to the next. When I come back, the first photo is gone. I can see it in the album but cannot open it. When I look at the file info
-
Help regarding attaching smartform to a report program for QM module
Hii, I have developed a certifiacate of analysis smartform for QM module and i attached it to a output type ...but i need to attach this smartform to a standard report RQCAAP01. can anyone help me what customizations i should do in report program in
-
How can I get the display resolution as set by the system control panel. Not the Primary Workspace size. Solved! Go to Solution.
-
I'm using the NI-7344 motion-controller (for the control of 2 servo-motors) in combination with an E-series DAQ-card. I need to acquire data at two different scanrates using breakpoints over RTSI, one channel for example every 10 encoderpulses, the s
-
Server Issue with Oracle and ASP Connection
We got a new server and are trying to set it up with Oracle Client to allow our web application to connect to the database server. We are getting connection errors, but on the old server, it works fine. We have Windows 2003 and IIS 6.0 on the new ser