New itunes download solved 100% CPU use

Apple haulted itunes download 8/2/11 due to issues. A new download was available the morning of 8/3/11.
Finally able to sync ipad to laptop without 100% CPU use by itunes or AppleMobileDevice
WinXP

Thanks for the update.  I tried to authorize my laptop last night for several hours, and am still getting the error message this morning, even after refreshing the page. I'll try again.

Similar Messages

  • TS3697 There is no camera roll download pop up after connected to iTune, to solve that I used Photo Transfer App to download the Photos, but how can I delete the photos in the camera rolls, as there are 9000 photos in the camera roll

    There is no camera roll download pop up after connected to iTune, to solve that I used Photo Transfer App to download the Photos, but how can I delete the photos in the camera rolls, as there are 9000 photos in the camera roll

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • HT2534 How can I make a new iTunes account so I can use the computer to download  music on my ipad

    How can I make a new iTunes account so I can use the computer to download  music on my ipad

    Why not use your previous iTunes account (Apple ID)? Explain a little more, please.

  • How do i delete an old itunes dowmload to let a new itunes download onto my laptop?

    how do i delete an old itunes download to let a new itunes download onto my laptop?
    I am having problems updating my iTunes on my laptop and I am wondering if anyone can shed any light on how to make it happen.
    the download gets too a stage where it fails too update fully because of a sourse problem with my current iTunes download
    Thanks for any help if you have any.
    Bryan

    If you want to sync your iPhone with a new computer, take a look at this Apple doc -> Using iPhone, iPad, or iPod with multiple computers
    iTunes will let you sync some stuff from multiple computers, but it'll only let you sync music, videos or apps from one iTunes library.

  • Some web pages causing 100% CPU use of iexplore.exe since Flash update

    I'm having a problem with certain Amazon.com pages hanging my
    Internet Explorer 6 using Flash Player 10,0,12,36, causing 100% CPU
    use for iexplore.exe and requiring me to End Task to quit. All the
    pages effected have an interactive mouseover Size and Color chart
    that intially says "Loading" but then says "Select Size and Color"
    once loaded. One mouseovers the various color patches and size
    options, each time giving item availability in that option. When
    the pages hang the IE browser with 100% CPU use that chart never
    gets to the "Select Size and Color" point, instead stuck at the
    "Loading" status. This happens most times, but not every time.
    Sometimes the pages load correctly, after a brief lag as it loads
    the chart.
    Amazon pages without this chart load fine.
    The start of this problem coincides with updating Flash.
    I can prevent the problem from happening almost every time if
    I can quickly get my cursor into that chart area while the page
    begins loading. If I allow the pages to load fully with no
    interaction they will hang almost every time.
    I have not noticed any problems on those same web pages using
    Firefox using Flash Player 9,0,124,0
    I also have not noticed any issues with other sites using
    Internet Explorer either. (YouTube, QVC, CNN...etc, all OK.)
    I had posted for assistance on the Experts Exchange site and
    there was some debate on whether the chart was a Java or
    Flash-based chart, so initially it was being approached as a
    possible Java issue, so I removed all Java versions on the system
    and installed various versions, but the same problem persists.
    I've downloaded but not run the Flash Uninstaller, as I'm
    reluctant to uninstall the Firefox Flash version without knowing
    for sure I could install 9,0,124,0 again.
    I've downloaded an archived fp9_archive.zip, which seems to
    indicate the contained files flashplayer9r124_winax.exe (Internet
    Explorer) and flashplayer9r124_win.exe (Netscape) would be versions
    9,0,124,0 to install after running the uninstaller.
    Can anyone check a few of the links below and see if the
    "Select Size and Color" chart is Flash based? If so, would
    executing the files listed above install 9,0,124,0 into my
    respective browsers again?
    http://www.amazon.com/FCS-Regular-7mm-Surf-Leash/dp/B00149XJ68
    http://www.amazon.com/Womens-Classic-Short-UGG-Boots/dp/B00064NH8W/ref=pd_ecc_rvi_cart_3
    http://www.amazon.com/Columbia-Sportswear-Womens-Benton-Springs/dp/B0006M6IQ2/ref=pd_ecc_r vi_cart_2
    http://www.amazon.com/Ladies-Chenille-Zip-Cardigan-Sweater/dp/B001E0YJ0C/ref=pd_ecc_rvi_ca rt_4
    XP IE 6 (error module : MSHTML.DLL)
    Flash Player version 10,0,12,36
    Firefox
    Flash Player version 9,0,124,0
    Thank you-
    Vickie

    I'm attempting to troubleshoot an issue with Amazon web pages
    since I've updated my Flash player. I would appreciate if someone
    could take a look at my initial post and advise if the issue seems
    to be Flash related.
    Thank you.
    I'm having a problem with certain Amazon.com pages hanging my
    Internet Explorer 6 using Flash Player 10,0,12,36, causing 100% CPU
    use for iexplore.exe and requiring me to End Task to quit. All the
    pages effected have an interactive mouseover Size and Color chart
    that intially says "Loading" but then says "Select Size and Color"
    once loaded. One mouseovers the various color patches and size
    options, each time giving item availability in that option. When
    the pages hang the IE browser with 100% CPU use that chart never
    gets to the "Select Size and Color" point, instead stuck at the
    "Loading" status. This happens most times, but not every time.
    Sometimes the pages load correctly, after a brief lag as it loads
    the chart.
    Amazon pages without this chart load fine.
    The start of this problem coincides with updating Flash.
    I can prevent the problem from happening almost every time if
    I can quickly get my cursor into that chart area while the page
    begins loading. If I allow the pages to load fully with no
    interaction they will hang almost every time.
    I have not noticed any problems on those same web pages using
    Firefox using Flash Player 9,0,124,0
    I also have not noticed any issues with other sites using
    Internet Explorer either. (YouTube, QVC, CNN...etc, all OK.)
    I had posted for assistance on the Experts Exchange site and
    there was some debate on whether the chart was a Java or
    Flash-based chart, so initially it was being approached as a
    possible Java issue, so I removed all Java versions on the system
    and installed various versions, but the same problem persists.
    I've downloaded but not run the Flash Uninstaller, as I'm
    reluctant to uninstall the Firefox Flash version without knowing
    for sure I could install 9,0,124,0 again.
    I've downloaded an archived fp9_archive.zip, which seems to
    indicate the contained files flashplayer9r124_winax.exe (Internet
    Explorer) and flashplayer9r124_win.exe (Netscape) would be versions
    9,0,124,0 to install after running the uninstaller.
    Can anyone check a few of the links below and see if the
    "Select Size and Color" chart is Flash based? If so, would
    executing the files listed above install 9,0,124,0 into my
    respective browsers again?
    http://www.amazon.com/FCS-Regular-7mm-Surf-Leash/dp/B00149XJ68
    http://www.amazon.com/Womens-Classic-Short-UGG-Boots/dp/B00064NH8W/ref=pd_ecc_rvi_cart_3
    http://www.amazon.com/Columbia-Sportswear-Womens-Benton-Springs/dp/B0006M6IQ2/ref=pd_ecc_r vi_cart_2
    http://www.amazon.com/Ladies-Chenille-Zip-Cardigan-Sweater/dp/B001E0YJ0C/ref=pd_ecc_rvi_ca rt_4
    XP IE 6 (error module : MSHTML.DLL)
    Flash Player version 10,0,12,36
    Firefox
    Flash Player version 9,0,124,0

  • New itune download. unable to right click copy

    new itunes download.
    I'm now unable to right click copy and past album artwork on my itune library.
    Please can you help

    The iTunes 12 Get Info dialog lacks right-click context menus (at least for now) but it still accepts most standard keyboard shortcuts and drag & drop actions.
    Delete Artwork
    On the artwork tab of Get Into, tap the image in question, use Backspace or Ctrl+X. Delete doesn't work.
    Or, tap the image at the top left of Get Info, this time use Backspace or Delete, it is Ctrl+X that doesn't work.
    Add Artwork
    Select artwork, press Ctrl+C to copy, tap the center of the Artwork tab, press Ctrl+V to paste.
    Or, select artwork, press Ctrl+C to copy, tap the small image area at the top left, press Ctrl+V to paste.
    Or, you can drag & drop to, or sometimes from, the same locations.
    You can also copy artwork from the Get Info dialog to Windows Explorer with the keyboard shortcuts.
    If the source image is on a web page right-click and use Copy Image rather than copy. (With Chrome I get a one pixel wraparound so tend to go for a temporary local copy anyway - not sure whose bug this is, but it isn't new.)
    If you have multiple images embedded drag the one you want to be the primary artwork to the leftmost position.
    Replace/Remove All Artwork
    The top left image box can be used to add or delete art from multiple tracks. In either case all existing artwork in all tracks is replaced/removed.
    Old Style Get Info Dialog
    Select some items, right-click, hold down shift, then click Get Info from the context menu. (Use alt/option on a Mac)
    tt2

  • HT201272 Import iPod music to new iTunes download

    My old laptop with my iTunes library crashed. I downloaded iTunes to a new laptop. I can not get my older iPod Nano to sync with the new iTunes download and import my older music. Is there anyway to import the old music from my iPod to the new iTunes download?

    You can transfer itunes purchases: File>Devices>Transfer Purchases

  • 100% CPU using LabView 7.1 and DSC module

    Seven years ago I used BridgeView and PXI to execute a project, and the results were so good that after that initial system, I installed one more using BridgeView, and three more using LabView 7.1.
    BridgeView is working very well, but lately, LabView 7.1 is giving me more and more problems. It all started in a system running LabView 7.1 and DSC on Windows XP, using a PXI-8187 controller with a PXI-1042 chassis. I have two PXI-6533 digital I/O boards, one PXI-6030E multifunction, one PXI-6713 analog output board, one PXI-6602 counter board and one PXI-8422 serial com. board. In may/06, all of the sudden, the CPU went to a 100% use. Since I am running PID's to control a flash-butt welding machine in a steel factory, this was extremely dangerous. I changed the controller and everything went back to normal. It was running fine until december/06, when the same behavior appeared again. This time changing the controller did not help. We increased the system memory, from 256 MB to 512 MB and everything worked fine. But one month later (january/07) the fault reappeared. This time we changed the chassis and from that moment to this time, we are running smoothly.
    Application problems were suspect from the very first time this problem appeared, but I was unable to identify the source, if any. I used PROFILE VI's and apparently the write/read tags were taking all the processor resources. However, changing the routines and disabling communications, and optimizing CPU intensive programs never solved the CPU overload.
    Until now, I was aware of only one system showing this erratic behavior. But today I went to check another system, with a totally different application. This one is used to measure the thickness of the steel sheet on a rolling mill. Is not so resource-intensive, but the maintenance folks told me that every time they turned off this particular system, they always had problems trying to turn it on.
    I was suspecting of a PLC-communication related issue, but what I found turned my alarms on. I turned off the system, which was fully functional, and turned it back on, and there it was, CPU load at 100%!. Is exactly the same problem that I have on the welder. This system has a PXI-8184, a PXI-1042 chassis, Windows XP, one PXI-6030E, one PXI-6713 and one PXI-6533. I battled for 20 minutes to put the system back in normal conditions.
    I specified every single board, installed everything and programmed all the applications. The BridgeView applications have never showed anything like this. I am using the DSC (Datalogging and Supervisory Control Module) on both applications, and the Lookout Protocol Drivers are communicating to Modicon PLC's.
    Please, I need help to solve this issue. I believe none of your actual Knowledge Base "100% CPU" articles apply to my case...
    Thanks in advance...
    Antonio Jimenez
    [email protected]

    Thanks for your reply...
    Yes, sometimes I have the feeling that the systems works again because some file or database gets initialized after so many reboots.
    Intentionally I turned off all the events and alarm logging to disk. Also the historical data logging is disabled. This is done by code, every time the main VI is started. This was included precisely to save CPU processing power. However, I am communicating to PLC's, and of course I have to declare variables inside the citadel database to make the communication possible.
    Right now I can't have access to the application, because the mill is rolling, but during the next maintenance stop I will check the database location and size, and I could change the directory location the next time the fault comes up.

  • 100% CPU use making me want to cry with 3 browsers

    I am using an Athlon XP 2500+ laptop/notebook with 1gb RAM
    and am having high CPU problems with Firefox 2.0.0.3 (no
    extensions), Opera 9.2 and IE.7.
    I have uninstalled and reinstalled Flash and Shockwave and
    uninstalled my AV, HIPS and firewall - temporarily!
    The following web slideshow makes any browser reach 100% CPU
    and causes the mouse to seriously lag on each browser.
    http://www.koat.com/slideshow/news/13245211/detail.html
    This high usage is constant, even when the mouse is not being
    touched and the page is not moving or playing music, etc.
    Strangely, if the controls of the slideshow are scrolled off
    the screen, then CPU returns to normal: <10%
    So I only get slowdown when I can SEE the buttons that move
    on to the next slide!
    Can anyone help?

    Hi,
    Welcome to the Discussions.
    This thread, Could it be the Logic Board?, is about the same problem. You may want to try the drive in an external firewire enclosure.
    John

  • Has anyone had issues with the new iTunes download?

    Unfortunately, I was one of countless folks that encountered issues with their iTunes on the previous download (mine did the whole choppy, skip thing whenever I tried to play music). I was able to rectify that with a suggestion posted here (NOWOOL was the author and many thanks by the way).
    That said, I was wondering if downloading the new iTunes would be worth it? Would appreciate some feedback. Thanks!

    Yep, half of my tracks are coming up displaying an error -69 ( http://docs.info.apple.com/article.html?artnum=302684 ) and every time I remove a track from the shuffle or update the shuffle, Itunes opens a window displaying the contents of J:\ (obviously the ipod) and hidden folder \iPod_Control.... I'm really irked with this. Been mucking around with the stupid thing for hours now.
    Nothing was wrong with it until it suddenly decided to stop working, it wouldn't play tracks and Itunes wouldn't recognise it, hadn't missed a beat up till now. Sifted through the Support site for an answer and getting told I needed to update Itunes and update the Ipod software, ***?? It was working fine before. Me thinks Apple have inserted software in ipod to force users to update to newer version of Itunes. Anyway, ever since updating to the latest Itunes, the Ipod is back in action, but it is trying to tell me that half of my mp3s are corrupt (see error -69), rofl, um no, it's your stupid software Apple, I'm off to by myself a decent MP3 player without the bloat software.

  • I have new itunes downloaded  , i have new itunes downloaded

    i downloaded new itunes & can't delete old podcasts I've already listened to. how do i delete them

    I have tried many things and none of them work i have purchased over 340 songs itunes and id really noy like to lose them all.

  • DW.exe 100% CPU use

    I'm using DW CS3 on a Dell laptop, XP-SP2, 1gig Ram, 1.6ghz
    processor. After 15 to 30 minutes of normal behavior DW starts
    using 99% of CPU cycles (according to Windows Task Manager) for 3
    to 5 minutes, effectively freezing the system. This can happen
    while doing normal code editing, or it can happen when absolutely
    nothing is going on. It will then release the system, but when you
    click on something, it goes right back into 99% CPU use. It doesn't
    seem to be associated with file transfers, but Task Manager does
    report "I/O Other" activity as though it's doing something on the
    internet.
    Any thoughts out there?
    Thanks!!!

    Are you running an antivirus on this box? Is it scanning
    realtime?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "CostaRica.John" <[email protected]> wrote
    in message
    news:fcjg0s$kse$[email protected]..
    > I'm using DW CS3 on a Dell laptop, XP-SP2, 1gig Ram,
    1.6ghz processor.
    > After
    > 15 to 30 minutes of normal behavior DW starts using 99%
    of CPU cycles
    > (according to Windows Task Manager) for 3 to 5 minutes,
    effectively
    > freezing
    > the system. This can happen while doing normal code
    editing, or it can
    > happen
    > when absolutely nothing is going on. It will then
    release the system, but
    > when
    > you click on something, it goes right back into 99% CPU
    use. It doesn't
    > seem
    > to be associated with file transfers, but Task Manager
    does report "I/O
    > Other"
    > activity as though it's doing something on the internet.
    >
    > Any thoughts out there?
    > Thanks!!!
    >

  • Need Help with music on my iphone with a new itunes download

    Hi,
    My old computer has died. All my music is on my iphone 5. Ive installed itunes onto a new computer and cant seem to get my music from my phone onto the itunes libary on my new computer. Also every time I try and get the music from my new computer onto my iphone it comes up with a error????
    I cant seem to sync the phone to the new itunes either, even though its the same apple id and password.
    Any help would be awesome.
    Cheers Evelyn )

    Once the Mac can see your Mac then you can use a program such as PhoneView (http://www.ecamm.com/mac/phoneview/) to see the content of you iPhone and transfer it to the Mac.
    Did the Mac die or did the HD die? If the issue is the Mac then you should be able to remove the HD and install in an external case to transfer the content to the new Mac.
    MJ

  • No audio on Ipad classic after new itunes download

    I have and IPOD classic that no longer plays audio through the ear phones or docking to Bose. It does play through the computer.  It happened around the time of the last itunes download and I did a restore and even an erase and restore. Apple said that it seems like a software problem. Has anyone else had this problem.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-Airplay-Icon-Missing. htm
     Cheers, Tom

  • TS4062 I purchased a used iPod Nano 4th Gen. I can't get it to sync on my new iTunes download

    I bought this iPod Nano 4th Generation in perfect condition, as a gift to my mother-in-law. I had been used once. I've downloaded a new version of iTunes onto her computer and added a music library from her CD's. I cannot the iPod it to accept the new data. It LOOKS like it's synching but the new data from iTunes is not transferring over onto the iPod.  It's as though this used Nano is locked or something. Does anybody have any ideas of what I can do? Thank you in advance to all you brainy types!

    Thanks Chris CA.
    In the Gen 4 they offer "Settings" then "Reset Settings"  Then it asks, "Do you want to reset your iPod?"  I click on "reset" but then nothing resets. :-(  This is what makes me think it might be locked or something....

Maybe you are looking for