New iTunes freezing after launch, what's going on?

After downloading the new iTunes with no problem, I've discovered that after a few seconds the programme freezes from any action. It's really starting to do my head in right now. Everything was going fine, I was downloading iOS 5 when it decided to lose connection, I tried again and same thing. After that, the problem with iTunes it self occured.
After spending a whole HOUR trying to get to the point of asking this question I am seriously fed up with this. Apple has well and truely messed up any chance of trying to persuade Blackberry users that the iPod is better since the whole update is causing more problems than what it's fixing.
If anyone can help find a "cure" for this freezing, I'd be extremely grateful. Thankfully my iPod didn't get wiped during the whole problem even though it was trying to sync at the time and then black screened for five minutes before coming to life again.

Hi kristenleducphotography,
I have a link for you that will help you troubleshoot this issue with your iPod classic. This link is to a troubleshooting assistant that will take you through the steps necessary to determine the source of the issue:
Apple - Support - iPod - iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Similar Messages

  • ITunes freezes after launching

    iTunes version: 11.2.2
    OS X 10.9.3
    MacBook Pro Early 2011
    Recently, iTunes has been freezing almost immediately after launching, irrespective of other applications running. The problem persists even in Safe Mode, and I have to Force Quit the application each time. Some times it runs fine for one song, but usually freezes immediately (not responding with spinning pinwheel).
    What are the troubleshooting steps for this issue? Restarting my computer has not resolved the issue.

    Plasma Prestige!  Success!  iPhone was recognized immediately and is syncing presently.  Thanks very much for your help!
    Plasma Prestige wrote:
    After reading about your issue, I tried syncing my own iPhone and experienced the freeze as well. I scoured the Support Communities and finally stumbled across a solution. I am not sure if this fixes the problem permanently but it certainly fixed it for now.
    1. Open the Finder
    2. In the Menu Bar, click Go
    3. While holding the 'Option' Key, select Library
    4. Expand the Application Support folder
    5. Expand SyncServices and delete the Local sync file
    6. Restart the system
    Plug in your iPhone after this and it should resolve the issue. Let me know if it works.

  • When I plug in my iPhone, iTunes freezes and crashes, what is going on?

    I've tried uninstalling and reinstalling iTunes, as well as restoring my iPhone to factory settings. But whenever  I plug in my phone, itunes crashes. It works with other programs but I've ran out of ideas. Anyone had this problem before?

    Hey Shunamoney,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following resources may provide a solution:
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/TS3219
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks,
    Matt M.

  • Why does the new Itunes freeze/do nothing when i click on my Ipod touch icon ?

    Why does the new Itunes freeze when i click on my Ipod touch icon to manage my content? All buttones, video, tv, info, music, they all do nothing. i was only able to sync by bringing up the old sidebar. Is this a software glitch, or am i missing a step? I just spent two days reorganizing and labeling all my music for the new itunes, and had to restore my ipod so i could upload my new library. i know what is supposed to come up when you click on the music or info tabs, but nothing happens, only the eject button works. whats going on?

    The screen is telling you to connect the iPod to your computer with iTunes with the USB connector.  iTunes should open and give you instructions as to what to do.  Whatyou need to need to do is to restore the iPod via iTunes.

  • Complete mac system; running mt lion; itune downloads incomplete.  What is going on?

    Complete mac system; running mt lion; itune downloads incomplete.  What is going on?
    Song plays for second to minutes then changes to next track.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Itunes freeze after 10.9.3 update...

    itunes freeze after 10.9.3 update...
    it seems looking for the store and then freeze...
    anyone else? suggestion?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5

    Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5.
    I tried it with a differnt Iphone and the results are the same. Any suggestions?

    Hi JZN1994,
    Welcome to the Apple Support Communities! I understand that after updating your computer to 10.9.3 iTunes stops responding when an iPhone is connected to it. There may be few different steps you will need to go through to get this resolved. I suggest working through the steps in the attached article.
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ts3219
    Thanks for reaching out, 
    -Joe

  • TS1424 when purchasing something it says contact itunes support to complete what is going on can any 1 help me

    when purchasing something it says contact itunes support to complete what is going on can any 1 help me

    Apple - Support - iTunes Store - Contact Us
    Glee Karaoke is an in app purchase ...
    Check out these support articles...
    iTunes Store: About In-App Purchases
    iTunes Store: Purchasing and managing auto-renewing subscriptions

  • ITunes freezing after 20 secs of syncing iPhone 3G ......

    iTunes freezing after 20 secs of syncing iPhone 3G>...... HELP
    it started to do this around 4 hours ago, i Havnt done anything abnormal....
    I have re-installed iTunes with no success... any suggestions??
    Thanks

    Left it to sync for an hour problem resolved

  • ITunes freeze after going to the overview of my iPad

    Hey guys!
    I just bought today the iPad 1 and I tried to update my IOS to 4.3. It worked everything fine, after restarting the iPad there is now a blackscreen with the apple logo and the loading icon in it.
    Actually, I tried now to reset the whole iPad - but there is a problem. I connected the iPad via USB to my computer but when I'm clicking to "Pascal's iPad" (Thats the name of my iPad) iTunes freezes and I need to close it via task manager.
    Wheres the problem? I really want to try out my iPad..
    Thannks in advance,
    Kardashina
    Message was edited by: Kardashina

    Tunes froze when I upgraded to 10.2.1.1 after recently acquiring a 3rd generation Nano to replace my 1st generation that wouldn't reset. It's all working now after uninstalling 10.2.1.1 and then installing 10.1.2. I had to delete "iTunes Library.itl" for iTunes to load. I then had add my folder to get back all my Poscasts and then re-subscribe to my relevant podcasts. After this I upgraded back to 10.2.1.1 and everything is sweet . So effectively I rebuilt my "iTunes Library.itl" file - I suspect that this file became corrupted either during the iTunes upgrade and/or introducing mt new iPod Nano and/or something else.

  • ITunes freezing after latest update 10.6.3

    Yesterday, iTunes installed an update to 10.6.3, and since then freezes less than a minute after launch. The beachball just spins and iTunes is completely unresponsive. It is usually downloading a new podcast at the time, but that is simply because that's the first thing iTunes does if I'm not syncing.
    I tried restarting.
    I tried restarting in Safe Mode.
    I tried restarting without anything connected to any ports.
    I tried uninstalling iTunes, restarting, installing a new download from apple website, and restarting again.
    I'm not sure what to do next....
    Everything was working fine up the the moment the upgrade finished.
    I'm running a fairly new Macbook Air running OSX 10.7.4 with all software updated.
    Thanks for any help!

    Hi,
    I'm having similar issues. When open iTunes, I now wait a couple minute before trying to sync iPad or iPod, or add or delete files.
    iTunes appears to doing something in the background and usually lasts 2 or 3 minutes. This background active occurs  when I have updated iTunes match, the deleting files I want to replace with the matched version.
    This very annoying as it stops downloads until background work finished. There are also memory issues.
    Has only happened since last update.
    Jim

  • ITunes freezes after playing one song

    Since upgrading to the new iTunes that was released today, after playing one song in iTunes in Windows, the program freezes and the only way out is to End Process on it. This only happens the first time that Windows starts up. After iTunes freezes and I End Process on it, and then run it again, it doesn't have this problem until the next time that Windows starts up.
    Anyone know what's going on and how to fix it?

    Turns out "Windows Media Player Network Sharing Service" was doing something that held up the computer when I used iTunes. So I followed these steps to disable the service permanently (since I don't use Windows Media Player): http://www.addictivetips.com/windows-tips/fix-wmpnetwk-exe-in-windows-7/

  • Itunes freezing when launched.

    I just upgraded to 7.5 and now my itunes will not open properly. I read other peoples posts about "missing files" and itunes not even starting up at all.. I think my problem is a bit different. When I click on the itunes application to launch.. itunes will start up and I see my playlists load up and than I get a little window that pops up asking to enter my password for my itunes account. The little window already has my username filled in and all I have to do is enter my password.. but as soon as the window fully loads it goes blank.. the window is there.. just with nothing in it and my itunes program is still in the background.. just with none of my playlists there anymore.. and on top of that its frozen.. so I have to go to my task manager to end the program. I've tried reinstalling itunes, installing quicktime 7.2, msconfig troubleshoot and using an older version of itunes.. nothing is working.

    I had a very similar, but slightly different problem (in Vista). After upgrading to 7.5, I could get into iTunes, and get a song to start playing, however, after a random time (2 seconds to 10 minutes), the playback would freeze (jitter like a skipping CD), and I would loose system control (keyboard and mouse). The only way out was to 'reset'.
    I tried the advice in some other posts (which is actually fro a different issue again), and uninstalled Quicktime (7.3) in 'add/remove programs'. I then installed v7.2 9from the link in other posts), and have had no issues with iTunes since.
    I would suggest giving it a try. It will only take 10 minutes, and can't really do any damage.
    How iTunes 7.5 and QT 7.3 got through testing is beyond me!

  • Itunes freezes on launch ever since signing up for iTunes Match

    Ever since I signed up for iTunes Match, iTunes on my Mac Mini freezes up right after launch... Help!

    Hi, I had a similar problem but in Windows.  The help page for that is at http://support.apple.com/kb/ts1717 and although I've searched, I can't find the equivalent for a Mac mini. Anyway, I'm posting because what worked for me was to delete the 'local' and 'roaming' profiles.  They are re-created automatically and iTunes then works fine.  But, as soon as you try to sign in to the iTunes store - BANG. It freezes every time and you have to delete those profiles again.
    So I think this is a definite bug with iTunes that is linked to the sign-in process. Hence why it is affected by iTunes Match. I don't believe it's a memory issue; the problem is repeatable and no other applications are running. Do try running it without signing-in and see how you get on . . .
    Good luck.
    Francis

  • ITunes freezes after 30 seconds

    No matter what I do on my computer, my iTunes automatically freezes after 30 seconds of opening. How can I fix this? Because I can't even buy music or sync my iPod.

    Hi if not now,
    In order to see your device in iTunes you may just need to select the option to have the Sidebar shown, something that by default is not displayed. This is where Devices and other items are displayed that you may be trying to locate.
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Show Status Bar - Choose View > Show Status Bar (this feature will conveniently display the number of items and playback time for a category, for example, music or movies).
    I hope this helps!
    - Ari

Maybe you are looking for

  • Strange Charz shown in my created .TXT file

    Hi, I have createt an empty .txt file with the following command: FileOutputStream fot = new FileOutputStream("Test.txt"); Then I wrote a simple String into it which should be written into 2 lines like that: MY FIRST TEXTFILE I used that code snippet

  • XI taking 4-5 hrs to process 30000 records....

    Hi All, we are loading MATMAS to ECC....   and got.. irritated to PI is taking 4-5 hrs to load 40000 iDoc my input file contains... 10000 record.... for each record  4 MATMAS idoc are created.... only 50 fields per record i have...... Why it takes 4-

  • Telnet server can't be disabled

    SENSOR-01# conf t SENSOR-01(config)# service host SENSOR-01(config-hos)# net SENSOR-01(config-hos-net)# show settings network-settings host-name: SENSOR-01 default: sensor telnet-option: disabled default: disabled access-list (min: 0, max: 512, curre

  • How to change keepalive between active and secondary sup on 6500

    how can I change the default keep alive time between redundant sup modules.

  • User switch scenario involving BSP application

    Hi    I am new to BSP application design. We have requirement from a BSP  application wherein different sales force personnel need to see different segments of same data on the BSP application - owing to security requirements. We are thinking of usin