New itunes/ipod software blocks Internet Explorer (IE)

I have new ipod (30 GB) for Xmas, which comes with new software and recommends installing it, even if you have it already for better performance..., but it blocks connection to Internet among many other problems caused to many other users.
Is any way to fix it or have to wait until new software is fix?
Between all many bigger problems I read I did not see this.
Check settings deeply by myself first and then with IP: PC not shows any signs of changes on settings, modem works properly and my other computer was able to connect to Internet. We conclude it was no problem of connection with IP system or hardware, was with any new software update or program installed yesterday as itunes, real player or windows media player.
Then uninstall ipod software and after restart was able to reconnect to Internet.
Reinstall ipod software to see if now all works properly but not, same problem again, so I have to uninstall again new ipod/ itunes software, just hope Apple fix it or be able to use old software with new ipod.
Before have a shuffle only .
Does old itunes software should work in the same way for both, right?
Because I am not using new again until is fix.
Reading all problems everybody else has I am very lucky, not lost previous songs and was able to install and download songs to ipod from itunes, real player and windows media player. I did not try quick time yet.
Thank you for any help.

bcr88
I'm assuming you haven't gotten any help with this problem?
So perhaps I can revive a little activity here ... I have the same problem, but with a twist:
1) From behind my corporate firewall, I can do all sorts of "iTunes things" such as access the iTMS and download purchases. And, of course, I can access all sorts of other services on the internet via the firewall just fine (so obviously my proxy settings are correct).
2) From behind the firewall, if I connect either my 5th gen iPod or 3rd gen Nano and the iPod firmware is out of date, I'll get the message saying there's a newer version of the s/w ... and if I click "Update" I'll then get a dialog saying "iTunes could not contact the iPod software update server because you are not connected to the Internet. Make sure your Internet connection is active and try again."
3) From outside of the firewall (with proxies turned off), the update works just fine.
This seems to point to iTunes (7.6.1) as having a problem with negotiating a firewall for the download service only.
Hoping someone from Apple is listening and replies with some clues to fixing this ...

Similar Messages

  • New HP probook 440 G1 internet explorer ver.11 not working in windows 8.1 64 Bit

    New HP probook 440 G1  internet explorer ver.11  not working in windows 8.1 64 Bit. When I open it closed or crash in a moment.Please help for the issue.
    M Khan

    Hi,
    I suggest you check the fix in this article:
    Fix: Internet Explorer freezes, crashes, hangs in Windows 7 | 8
    http://www.thewindowsclub.com/internet-explorer-freezes-crashes-hangs
    If it doesn't work, please help to post back the IE crash dump file here for our research:
    First enable app crash dump collection by copying following words into notepad, saving it as dump.reg and importing it:
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\localdumps\iexplore.EXE]
    "DumpFolder"=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,\
      00,6d,00,70,00,73,00,00,00
    "DumpCount"=dword:00000010
    "DumpType"=dword:00000001
    "CustomDumpFlags"=dword:00000000
    Then, open IE to repro the issue. If crash issue appeared, please find the crashdump file under c:\.
    To further help you, please upload this file into Skydrive and shared the link here.
    Also, you can try to analyze dump by yourself if you would like to：
    How to analyze app crash dump file:
    http://blogs.technet.com/b/askperf/archive/2007/05/29/basic-debugging-of-an-application-crash.aspx
    Kate Li
    TechNet Community Support

  • Firefox either closes suddenly when I click on the address bar after startup or it hangs and also blocks internet explorer from loading

    On my Windows XP sp3 system the current the last two releases of Firefox both exhibit the same behavior. When I launch Firefox it will either shutdown within seconds with no crash reporter or other error logged or it will hang completely and indefinitely. When it hangs it also blocks internet explorer 8 from loading. I have tried and followed all the steps in the crashing FAQ including safe mode, uninstalls, re-installs, profile deletes (even the profile dialog closed suddenly). I use Norton Internet Security version 18.6.0.29. A full virus scan does not find any problems. I have disabled all toolbars, plugins and addons and the problem persists. Google Chrome, Internet Explorer and Opera all work fine. Only occasionally does Firefox load and keep running. It's as if it is failing on some check at startup and either crashes or hangs most of the time.

    That is a Flash Player that plays an MP3 file.
    *http://instantteleseminar.com/?eventid=29457633
    *http://ds1.downloadtech.net/cn1086/audio/59175301551694-002.mp3
    Is Flash installed and working?
    *http://www.adobe.com/software/flash/about/
    *http://helpx.adobe.com/flash-player.html
    *http://helpx.adobe.com/flash-player/kb/troubleshoot-games-video-audio-flash.html
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Tried to sync iPod Touch, noted "new" iTunes. iPod won't sync ("iTunes is unable to load data class information from Sync Services"). Tried the fix, but iTunes hangs when I try to open Preferences.

    Just tried to download new audiobooks to my iPod Touch 3, and noted new iTunes. iPod won't sync ("iTunes is unable to load data class information from Sync Services"). Tried to Reset Sync History per Support Article, but it didn't work. My purchased audiobooks are also gone from my iTunes Library.  Any fix, or is my best bet to uninstall new iTunes and reload earlier version??

    http://support.apple.com/kb/TS2690
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • The new flash player update crashes internet explorer and firefox

    The new flash player update crashes internet explorer and firefox, please send a new release to fix the problem ASAP!

    ok   here's more mystery.  i just uninstalled and reinstalled flash player using the adobe uninstaller and rebooting after each step.  aqlso installed latest java.  i started looking at videos and here are the ones that worked: you tube
                                                                                           imdb
                                                                                           hulu
                                                                                           ebaumsworld
                                      here are the ones that didn't work:    yahoo
                                                                                           msn
                                                                                           reuters
                                    here are the ones that partially worked: the blaze (works on videos that originate from you tube, but not from news stories)
                                                                                              bing (work on videos from their video section - entertainment type, but not from news videos)
    the common thing here seems to be that news type videos crash and entertainment type don't.  also videos seem more likely to crash on internet portals like yahoo

  • Trying to install older version of photoshop elements on new windows 7 computer with internet explorer 11. Install program does not recognize windows explorer 11. What can I do

    trying to install older version of photoshop elements on new windows 7 computer with internet explorer 11. Install program does not recognize windows explorer 11. What can I do

    HI Bill,
    Did you set Internet Explorer as the default browser? If not the set it as the default. Check to see if you can do custom install
    Thanks
    Scott
    Here is the system req.
    Photoshop Elements 6.0
    Windows
    Intel Pentium 4, Pentium M, or Intel Centrino 1.3 GHz (or compatible) processor
    Microsoft Windows XP with Service Pack 2 or Windows Vista
    256 MB of RAM (512 MB recommended)
    1.5 GB of available hard-disk space
    Color monitor with 16-bit color video card
    1024 x 768 monitor resolution at 96 dpi or less
    Microsoft DirectX 9 compatible display driver
    CD-ROM drive
    Web features require Microsoft Internet Explorer 6, Netscape Navigator 7.0, or Mozilla Firefox 1.5
    Languages

  • Setup failed (Could not write value devenv.exe to key \SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BLOCK_CROSS_PROTOCOL_FILE_NAVIGATION)

    Hello, all,
    I encounter a really confused problem while installing Visual Studio 2013 Professional.
    It say Install cannot continue because some required components failed.
    And there is error information given by log file.
    [1868:0558][2015-04-18T00:55:46]i000: MUX:  ExecuteError: Package (vs_devenv) failed: Error Message Id: 1406 ErrorMessage: Could not write value devenv.exe to key \SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BLOCK_CROSS_PROTOCOL_FILE_NAVIGATION.
      Verify that you have sufficient access to that key, or contact your support personnel.
    [2058:2044][2015-04-18T00:55:47]e000: Error 0x80070643: Failed to install MSI package.
    [2058:2044][2015-04-18T00:55:47]e000: Error 0x80070643: Failed to execute MSI package.
    [1868:0558][2015-04-18T00:55:47]e000: Error 0x80070643: Failed to configure per-machine MSI package.
    Strange is that I cannot even find the key FEATURE_BLOCK_CROSS_PROTOCOL_FILE_NAVIGATION under
    FeatureControl.
    I have searched in Internet, but no one gives out a effective way to solve this problem.
    Could you help me!!! Thank you very much.

    Hello Forever_fzf,
    The problem is that Visual Studio is trying to write that key to your OS but failed. There are many possible reasons so it is hard to check it just from the above error info, I think you can take the following actions to test whether they can fix your problem:
    1. It is possible the the source(the installer) is corrupt on your OS. So our first step is to check the source. Please download the ISO format and verify its hash checksum sha-1 value by refer to the following page:
    https://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs
    2. If the source is alright, check that you are administrator and you have ran the setup as administrator. If you've already checked that and you still do not have privilege when install. We need to refer to the following blog:
    http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-setup-errors-by-using-the-subinacl-tool-to-repair-file-and-registry-permissions.aspx
    It contains a script, the script will involve subinacl tool to give all registries the Admin privilege, then you will be able to write keys to that registries.
    3. The reigistry key HKLM\SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BLOCK_CROSS_PROTOCOL_FILE_NAVIGATION sounds related to IE. May I also know your IE version?
    Best regards,
    Best regards, 
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Problem with new iTunes & iPod update

    Ever since installing the new iTunes update I've been having problems updating my iPod.
    At first when I ran the new version of iTunes a message popped up telling me that I needed to update the software on my iPod. Upon trying to do that, another window popped up saying that 'iPod couldn't be mounted'.
    So now my computer can't detect my iPod. I've restored my ipod which didn't help. I would reset my ipod but I can't even do that since when I run the ipod updater program it doesn't detect it. I've tried numerous times to see unplugging/plugging my ipod with the firewire and noticed the ipod hdd was whirring like crazy (and still no detection).
    Since the last time I attempted doing that I've noticed that some of my mp3 files on my ipod have become corrupt and would stop halfway through play and just skip to the next song.
    Any idea whats going on and how I could fix this??

    iPod won't turn on.
    iPod doesn't appear in iTunes or on the Mac desktop.
    iPod does not appear in iPod Updater or iTunes in Mac OS X.
    iPod appears on the Mac OS X desktop but not in iTunes.
    Try to restore it in disk mode.
    Putting iPod into disk mode.

  • Itunes 5 killed my internet explorer??

    I recently upgraded to itunes5 and it's had the nasty effect of killing internet exporer. All I can now get is 'cannot display page'. My connection is fine but it just won't display pages. I've tried deleting addtional winsock files etc. but no joy.
    In desparation I reformatted and the problem dispeared - until i reinstalled 5 and it killed ie again. I've now reformatted again but need my itunes!! any help, suggestions much appreciated

    Hello there!
    Exactly the same thing happened to me (I have a PC and windows XP)!!! After downloading the new Itune5, my internet explorer crashed...i had to restore my computer to an earlier date and now my Itune doesn't work anymore..it says that there are some missing files...thanks Apple! I have tried to re-install an older i-tune version but doesn't want to know anything...i basically have to delete and re-install the older version...what a pain!!!!!!!!! anyone has a solution????????

  • Newest iTunes/iPod software compatability

    Hi there,
    I have a 4th gen. click wheel iPod. A month or so back I installed iTunes 7.0, and immediately upon connecting my iPod it stopped working. Now any time I try to turn it on, it sounds as though the actual disc drive inside is skipping, and I either get the sad iPod or folder icons. Is this a compatability issue between older iPod models and the new iTunes? I need to figure out whether I should get a new iPod, because my poor old one will NOT reset. Please help!

    Hello,
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Updating iTunes & iPod software

    I recently puchased some songs from the iTunes store, but did on a different computer to the one on which I keep my music. I then tried to import the songs into my iTunes directory and I was propmted to update iTunes to version 7 (7.0.1.8). Having done this, I could play the new music, but the songs had to be placed in a different directory i.e. it would not place them in the iTunes directory. Next I went to synchronise my iPod, and I was told to update my iPod software to version 3.1.1 which I did. When propmted I disconnected the iPod from my pc, connected to external power to allow the update to complete. Reconnecting my iPod to my pc, I was told that the new songs would not synchronise because I had to update my iPod software !!
    So I disconnected my iPod once more, deleted the new songs from iTunes, made a few palylist changes, and reconnected my iPod. Very quickly I was told that iPod update was complete in iTunes, but my iPod is stilling flashing "Do Not Disconnect". Is this normal?

    I am removing this question as I posted another which was more concise

  • Downloaded new iTunes/iPod updater, iTunes now crashes during iPod updating

    I downloaded the new iTunes and iPod updater yesterday-- now when I plug my iPod into the USB, it recognizes my iPod, the "Updating iPod. Do not disconnect." message comes up, but as soon as "Updating Track 1 of 9." appears, I get a Send Error Report message "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience. etc" (I wasn't sure what, if anything, I shoudl include here from the Error Report Contents.) Has anyone else encountered this or have any tips? I've tried the uninstall/reinstall trick to no avail.
    Thanks!

    I fixed this for my Nano by using the iPod Updater Restore to revert the firmware to version 1.0 and removing iTunes 6.0.2 through Control Panel. I didn't delete the leftover directories. I then reinstalled iTunes version 6.0.1.3.
    The Nano is now happily recopying all my music. Should be done by midnight.
    Good luck.

  • When I click on run to start my download of itunes a box from internet explorer pops up and says "The connection to the server was reset." Any idea what's going on?

    In attempting to install itunes on a laptop I keep encountering a problem with internet explorer. When I click on run a box pops up and says, "The connection from the server was reset." I don't know how to get past this.

    Use a different browser.

  • Svt hompage play prima dosent whor in new firefox i must have internet explorer 8

    I cant play svt prima in firefox i must have internet explorer 8
    fix the problem in firefox 4 please
    == This happened ==
    Every time Firefox opened
    == svt prima

    Well I downloaded FireBug but I don't see how it debugs flash.  IE8 is case sensitive so spelling isn't an issue.  I tried to simplify the original example because I get the URL from XML var hardcodedXML:String="<photos><image title='Test 1'>image1.jpg</image></photos>";  It works under IE8 - I just can't get it to work in FireFox.
    Options
    Name
    Size
    Type
    Date Modified
    Permissions[?]
    Folder
    Nov 7 23:00
    drwxr-xr-x
    Folder
    Oct 31 21:49
    drwxr-xr-x
    Folder
    Oct 31 22:01
    drwxr-xr-x
    Folder
    Oct 31 21:59
    drwxr-xr-x
    Folder
    Oct 31 20:44
    drwxr-xr-x
    FrontPage.xml
    648 B
    XML file
    Oct 31 19:53
    -rwxr-xr-x
    New.xml
    1.23 KB
    XML file
    Oct 31 19:53
    -rwxr-xr-x
    OriginalTemplate.swf
    58.97 KB
    SWF file
    Nov 7 23:00
    -rwxr-xr-x
    WorkingGallery.swf
    93.94 KB
    SWF file
    Oct 31 20:32
    -rwxr-xr-x
    gallery-new.htm
    3.84 KB
    HTM file
    Oct 31 19:49
    -rwxr-xr-x
    image1.jpg
    78.96 KB
    JPG file
    Nov 2 06:58
    -rwxr-xr-x
    image2.jpg
    18.54 KB
    JPG file
    Nov 2 06:58
    -rwxr-xr-x
    image3.jpg
    19.8 KB
    JPG file
    Nov 2 06:58
    -rwxr-xr-x
    image4.jpg
    80.29 KB
    JPG file
    Nov 2 07:00
    -rwxr-xr-x
    index.html
    2.07 KB
    HTML file
    Nov 7 23:00
    -rwxr-xr-x
    Select All
    Total: 3 folders, 10 files
    Total file size: 358.27 KB

  • Charging a Shuffle on a PC without iTunes/iPod software???

    Can i charge my iPod Shuffle on a Windows PC/Notebook, that does NOT have iPod Software or iTunes installed on it???

    There's one caveat to doing this. If Windows mounts the iPod and doesn't unmount it (I think this is a function of iTunesHelper.exe) then you should eject the drive before disconnecting. You will tell because the iPod will flash orange while it's mounted. Solid orange or green means it is safe to unplug.

Maybe you are looking for

  • How to setup the RV120W for quickvpn

    Hello, The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn. Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ? Thanks for any help

  • Payload structure not visible in Moni

    Hello All, One of the interface where we are calling RESTful webservice thru java code, when we calling java code from standalone the webservice working fine based on input parameters webservice sending response back, but the same one when I import i

  • "E-mail sender address rejected message"

    Hello guys. I have a big issue with my mobile devices. My Apple ID is [email protected] When I started using iCloud I created a [email protected] email address. In Mail on my Mac all works perfectly, but on my iPhone 4 and iPad2 I cannot send mails,

  • Moving checkbox items into other group

    I have a very simple Word doc that when I have Acrobat automatically create a form from it, puts checkbox items into groups I need to change. For example, the grouping should be GroupA Item1 Item2 Item3 Item4 but what I get is GroupA Item1 Item2 Grou

  • Genius in iPod classic 80GB ? Is it working?

    Hi everyone I am new here with my first 'issue' of my ipod. I always thought I can use geniuas with my ipod classic until I actually started to using it. I cannot see any option called genius in my ipod classic 80GB. Is something wrong with my ipod o