New itunes update - I now can't open itunes

i have a MacBook Pro with OSX 10.6 and have just updated my itunes software, but I can now not open itunes.

Apple menu > Software Update.
You should update your OS to 10.6.8 (as well as any other updates).
have just updated my itunes software
to what version of iTunes?

Similar Messages

  • Did Itunes update and now can't open it. It tells me msvcr80.dll is not installed,

    Did update and now can't open itunes due error of msvc80.dll

    Hello Nailjack,
    Thank you for the details of the issue you are experiencing with iTunes.  I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described.  The following article has steps to do this(it is important to remove all components in the order listed):
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    I recommend continuing with this article if you continue to experience issues with installing iTunes:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT1338 Help since installing latest software updates I now can't open safari????

    Help since installing latest software updates I now can't open safari????

    Hi Stewartirl,
    Welcome to the Support Communities!
    Are you only having issues opening Safari? Are you able to connect to the internet with other Browsers or using Mail?
    The article below is a good starting point for troubleshooting.  I'd start by plugging in an ethernet cable and restarting the computer.  If the wired (LAN) connection works, then unplug the ethernet cable and continue troubleshooting the wireless connection.
    Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    http://support.apple.com/kb/HT1714
    Cheers,
    - Judy

  • Recently I did an update and now can't open iTunes.  I get a Runtime Error telling me C Runtime library loaded incorrectly.  Please help?

    Recently, I did an update on iTunes on my Acer laptop. Now I can't open iTunes & I get a Runtime Error telling me C Runtime library is loaded incorrectly.  I have Windows 7 64-bit. Do I need to reinstall iTunes.

    Hi sungoddess69,
    Thanks for visiting Apple Support Communities.
    To resolve this error, I recommend completely removing and reinstalling iTunes and all of its related components using these steps:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    You can find the article with these steps and more information here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Best,
    Jeremy

  • Downloaded latest IOS update and now can't open apps or mail attachments.  Help?

    Just downloaded the latest IOS update on my iPad and now can no longer access app's or attachments in my mail box.
    I am receiving my e-mail but cannot access the internet, Google etc
    Does anyone have any suggestions?
    Many thanks

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • I already did this but don't know where to go for an answer. Fire fox crashed and I updated and now can't open IM's or SMS's from down arrow in Compose box on email page.

    ''dupe of https://support.mozilla.org/en-US/questions/910470''
    I guess I have done enough and will check it out and see if I can get another Internet company as Firefox is to complicated for me.
    I have been working on this for 3 days and have more to do in my life than fool with this. I have already posted the problem and don't know where to find the answer. I can't open SMS's and IM's in the pull down in Compose box on email page.

    Its known issue, see;
    * https://bugzilla.mozilla.org/show_bug.cgi?id=713014
    you can open a bugzilla account and follow the bug, but i think its fixed in nightly
    * firefox.com/beta

  • Updated to the new ios 6 and now can't open app store

    I updated my iphone 4s and now when I go to open the app store, its just a white page with the loading message, I have waited over a minute, and nothing.  Also half my apps wont open either.  Im not impressed with this!!   Do I have to restore my phone cause I updated it?

    Photo stream only keeps your photos for 30 days.  After that, they are removed from your photo stream but not from any device that has already received them.  Chances are, the 44 photos are from the last 30 days; the others are not there because they are no longer in your photo stream.
    If the photos were in your camera roll when you last backed up, restoring to the backup should recover them.  However, you will have to restore to the entire backup to do so.  If they weren't backed up or imported to your computer, there is no way to recover them now.
    To be sure your photos are saved, regularly import them from the camera roll to your computer as outlined here: http://support.apple.com/kb/HT4083.

  • I installed a new hard drive and now can't open Adobe Photoshop Elements - what do I need to do?

    My hard drive on my iMac crashed 2 wks ago, and I now have a new SSD harddrive. I had an image of everything from my old hard drive, but Elements won't open. What to do?

    Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
    1. Revert back to Snow Leopard.
    2. Purchase FCP X... 
    if you can't stand FCP X
    3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
    I just got FCS 3 today through apple phone sales..

  • HT5167 Great I updated and now can't open outlook or eye tv. Thanks apple now have to do a restore!!

    Warning!! Do not update to OSX 10.7.4 Lion! I updated this afternoon and now none of my office suite works or my eye tv application. I am now in the process of using a backup to fix the problem. Well done Apple! I'd expect this from Microsoft not Apple.

    Well I eventually fixed the problem! I downloaded a copy of Lion, then created a bootable disc. I then reinstalled Lion which took about 2 hours because there was some downloading going on which said 107 hours to start with then eventually whent down to 1.20 Minuts. But after the download the install started which took about another 50 mins.
    Not sure what happened but all I can say is everything was working fine until I did the 10.7.4 update. I did try to do a repair on permissions via disc utility but there were no issues to repair. So that wasnt the problem. Not only could I not open Outlook or EyeTV but most of my Apps could not open. Im not convinced that Lion is all its cracked up to be. I dont think Ill be wasting my money on Mountain Lion when its released if there is going to be more problems like this one.

  • After OSX Mavericks update I now can't open the App store

    Upgraded to the new Mavericks OS however when i try to open the App store as well as a few other apps fail to load at all.
    Any advice would be appreciated.
    Thanks
    Tom

    If you haven't solved this yet, try re-installing the OS. If you have solved it, please share how you fixed it.
    Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions. Then reinstall the OS.
    OS X Recovery
    OS X Recovery (2)

  • Downloaded new upgrade Firefox and now can't open firefox. I get the following error message "Offline Mode Firefox is currently in offline mode and can't browse the web."

    The error message says to uncheck the "work offline" menu. Where is the work offline menu?
    I have a Imac and Safari works fine.

    The work offline option can be found from Firefox button -> Web developer or from the menubar toolbar -> Work offline (Or at least thats what happens in Windows).
    Have you any other reason for being offline; router off, firefox not dialing up or whatever. Or is security software or a firewall blocking firefox, or a network connection, or firefox setting etc set wrongly.
    See also
    *[[cannot connect after upgrading firefox]]
    *[[options window - advanced panel]]
    * [[error loading web sites]]

  • I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?

    I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?

    1)Copy this below from --{code} to --{code}
    --{code}
    set p2l to "" & (path to library folder from user domain)
    set the_cache to p2l & "Caches:com.apple.iWork.fonts"
    tell application "System Events"
              set maybe to exists disk item the_cache
              if maybe then delete disk item the_cache
    end tell
    if maybe then
              display dialog "I deleted the file :" & return & the_cache
    else
              display dialog "The file :" & return & the_cache & return & "was unavailable !"
    end if
    --{code}
    2) Than open Applescript Editor in your applications and paste it
    3) Than select "Compile"
    4) Than select "Run"

  • Upgraded to 11.3.1 now can't open library. Won't read. I have an older iMac (2008). Message I get is: cannot be read because was created by newer version of iTunes. Would you like to download iTunes now?' ... so I do and it fixes nothing. OS 10.6.8

    Upgraded to 11.3.1 now can't open library. Won't read. I have an older iMac (2008). Message I get is: cannot be read because was created by newer version of iTunes. Would you like to download iTunes now?' ... so I do and it fixes nothing. Same message again. OS is 10.6.8.

    Thanks again. The option thing got me further than I've gotten thus far but when I went to choose a library I got that same message.
    I do have options. I have 2 iMacs. I can still access my music through 'sharing' and download it onto my newer iMac. Trouble is it doesn't have a CD port and I like to burn. From what I've read about their new Mac portable CD/DVD drive, it's shaky at best. Incidentally, do you know of any drives that work well with Macs and cost less than $89.00?
    I've figured out I can download a previous library from my old Mac then upload it from the new one which should put me back in business, but what do I do with the corrupt one that's there now, just trash it? Also, when I do the option key my other choice is Create A New Library. Should I do that and put the good previous library into it?
    Thanks a million, I really appreciate your time. I'm an old fogey and computers often mystify me, especially when they lock me out of things for no apparent reason.

  • TS1717 since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?

    since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?
    these are the boxes that open up:
    I am unsure as to wether I need to unistall and start again but then worry about the vast amount of songs already in the folder that I would have to reload.

    anyone able to help me with the above?

  • I tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?

    i tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?

    Hello bajura007,
    Thank you for the details of the issue you are experiencing with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
    You can find the full article here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Can I script the robohelp compiler?

    Hi! I'd like to know if I can write a command line script to automate CHM file compilation. I am a developer so I'm not afraid of writing code. I just want to know if there's any way to connect to the robohelp (CHM) compiler via a script (Javascript,

  • Why a non static member class can be defined in an interface

    Non-static member classes are defined as instance members of other classes, just like fields and instance methods are defined in a class. An instance of a non-static member class always has an enclosing instance associated with it. An interface can't

  • Iphone 2.01 update troubles

    Prior to updating my phone i had no problems. Post update it crashed and it wouldn't reset. Finally im back up and running but i'm finding in areas where i had a previous connection its now saying "cannot access the network". Anyone else getting this

  • Perpetual "Not Responding" message/unresponsive script/see all that I've tried

    I have: * Restarted in "Safe Mode" * Reset my Firefox to "out of the box" (there are no themes or plugins currently installed) * Run with Java activated and with Java disabled (I'm aware that there are issues with the current version of Java 7). * Un

  • Create Local Term Store in code

    I've seen some posts on how to create Term Stores on Central Admin level but I was wondering if it's possible to create a Local Term store using c# ? Thanks in advance !