New Journal: an error ocurred
Hi,
I have done the "set up Journals" wizard in the admin console for an application and I get the message that it has successfully finished.
However when I go into Excel and click on Journals and then "Enter a new Journal" I get the following Error message:
"New Journal: an error occurred". Also when I click on Opening an existing Journal I get another error message:
"Run time error 91 object variable or with block variable not set".
I have done a modify application but I still get the same result. Does anybody have an idea or experienced the same problem?
Best regards
Robert
Is this server setup on a single machine, or two?
I had a similar problem recently creating a journal template, on a 2-server setup, that was somehow related to the Reporting Services installation on the app server not correctly communicating with the DB server, during the creation of the journal template.
I ended up working around the problem by backing up the appset, restoring it to my own virtual machine (a single-server setup), creating the journal template file there, and copying that Excel template over to the correct path in the webfolders directory on the 2-server setup.
I never figured out the root cause, or resolved it -- but it was somehow related to Reporting Services.
Similar Messages
-
Can not get new 7.0.2 download to work keep getting message saying error ocurred please try again. How do I get download to work?
There are a dozen or more possible causes, so without additional information no one can help you. To start with, what is the number associated with the error message?
-
I have Windows Vista, when I tried to install iTunes, the following error pops up:
"An error ocurred during the installation of assembly policy 8.0 microsoft VC80.CRT. Win32 policy version"
What can I do to complete the installation?
Thanks in advance!"An error ocurred during the installation of assembly policy 8.0 microsoft VC80.CRT. Win32 policy version"
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Reader 7.0.9, Win 2k - "An Internal Error Ocurred" Error
Due to a new system being implemented, everyone needs a newer version of Adobe Reader (previously 5). The last 'supported' version of reader for this system is v7.0.9.
So far, I have uninstalled 5, then proceeded to install 7.0.9 and this has worked on all I have done so far on both 2000 & XP.
Today, I tried doing exactly the same but on 3 computers hit a problem. These computers are better than the recommended requirements and run 2000 SP3. The install runs the same as the others and finishes fine, but when clicking on the new Adobe Reader shortcut, the error
b An Internal Error Ocurred.
I then unistalled, rebooted then went on to remove all traces of adobe I could find. Reinstalled and unfortunately had the same problem.
I hope someone has some idea of what causes this error and how to solve it. I have no luck so far in my search, with most references to it ending with 'flatten windows' or using v8 which we can't.
Thanks in advance,
MattCould you please try and execute the following commands on your end (via both the processes i.e. User logged in on Domain and User logged in after bypassing domain)
echo %userprofile% (Should return an existing and verifiable path for the logged in user's data)
echo %username% (Should return the User Name of the logged in user)
This would help you to figure out whether this is a problem with the User Profile path being incorrect or not. -
VO Ext- Error ocurred trying to activate the wizard pageAttribute settings
Hi
I am new to OAF and working on R12.1.3 vesrion. I am facing an issue while extending standard VO CustomerAccessesVO which is in the path
/oracle/apps/asn/common/customer/server. My requirement is to add a new column AS_ACCESSES_ALL.SALESFORECE_ROLE_CODE in the extended view.
This VO uses the entity object CustomerAccessEO(/oracle/apps/asn/common/customer/schema/server) and this entity object extends another EO AccessEO which is having base table AS_ACCESSES_ALL (/oracle/apps/asn/common/schema/server).
While extending this VO, I only select EO CustomerAccessEO and then I will have the attribute in available attribute list and selected attribute list.
Available attribute list is having all the attributes which are in EO AccessEO(As CustomerAccessEO is not having any attribute it only extend AccessEO).
Selected attribute list is having all the attibutes which are present in the query of CustomerAccessesVO.
Now if I include a new attribute as my new column and even I don't include any new attribute and click on Next button. I got error 'Error ocurred trying to activate the wizard pageAttribute settings' java.lang.NullPointerException.
Now If I included my new column by adding new attribute and ignore this error I am able to extend this VO and able to get all the file Server.xml, XXCustomerAccessesVO.xml, Voimpl.java, Rowimpl.java.
But the problem is rowimpl.java file is generated empty.*
However I substitute this extended VO I am able to see the extended VO in application but that says- No entity object used. No attributes are selected.
In short my problem is:-
*1) Getting error 'Error ocurred trying to activate the wizard pageAttribute settings' in Create View Object wizard.
2) If I ignore error why *rowimpl.java file is generated empty even I checked all the check boxes.
3) Why I am getting message in application-- No entity object used. No attributes are selected.*
Please reply as this is have become critical.
Thanks
PiyushHi All,
Problem is still not yet resolved.
Can any one please look into it. -
Payroll Journal Import Error EF04
Hi,
we are working in oracle applications 11i (11.5.0) TEST Instance.
As monthly operations the payroll personnel upload the salaries journal to Gl Interface with oracle web adi. We have oracle hrms full install.
We are trying to setup and use the direct payroll gl interface. The following steps are done so far:
1. Cost Allocation Flexfield is setup and points to the same value sets as in the Accounting Key Flexfield.
2. KFF qualifiers NOW are all enabled for all segments.
3. 5 Costing accounts for 5 elements are entered directly to an employee at employee assignment element entry level.
4. GL map to costing segments is done and although the employee is paid in foreign currency, his payroll is assigned to the functional set of book.
5. costing is run
6. cost break down report for costing run and only 2 lines are there! this is my first issue
7. transfer to GL is requested .
8. On the attempt to import the journals from payroll the request completes with warning And the two line have error code EF04
The GL super user have checked the 5 accounts and they are valid and their combinations exist in the system.
What do we need to check?
Thanks ...Please review these docs and see if it helps.
Journal Import Error with Status Code EF04 [ID 235029.1]
Journal Import fails with EF04 error but security rule violation for new code combinations [ID 953109.1
Journal Import - Record With Two Errors Ef04 And Em30 - Em30 Code Is Incorrect [ID 1175769.1]
Receiving EF04 Error when Consolidation Run Option is Set to Run Journal Import [ID 150841.1]
Doing a Journal Import Encounters EF04 Invalid Accounting Flexfields [ID 107896.1]
EF04 error in GLLEZL incorrect, as code combination gets created [ID 368198.1
Errors Caused Because of Misclassified Accounts [ID 231948.1]
How to Use the Journal Import Correction Screen [ID 1056801.6]
Thanks,
Hussein -
Change the field 'StornoToTr' in new journal entry.
6.50.098 SP:01 EF:14
Hi,
When I reverse (Cancel) a journal entry (Storno), I create a new one with
opposite values and then I insert it (with oJournalEntries Object). But in table 'OJDT' the field 'StornoToTr' in new journal entry, must be changed with transID of cancelled Journal Entry.
How can I do that with 'oJournalEntries' Object?
Best Regards,
Ricardp Pereirahi,
Here is a nice piece of code that set the journal entries for reversal on a certain date. So when a user logs into B1 on that date they will be shown a list of journal entries that are scheduled to be reversed. The user click execute and the journal entries are revered and the functionality you are looking for will be implemented.
Dim journal As SAPbobsCOM.JournalEntries
journal =
oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oJournalEntries)
If journal.GetByKey("665") = True Then
journal.StornoDate = "1/11/04"
journal.UseAutoStorno = SAPbobsCOM.BoYesNoEnum.tYES
lErrCode = journal.Update()
'// Check for errors d
oCompany.GetLastError(lErrCode, sErrMsg)
If lErrCode <> 0 Then
MsgBox(sErrMsg)
End If
End If
Its an alternative way to reverse journal entries.
Thanks,
Cormac -
First time Journal saving Error NW7.5 Sp4
Hi,
I am using the BPC NW sp4 version and have created a journal template. When I try to save the journal entry, I get the following error "new journal ID: Failed to get next member of range member (UJJ_JRNID - ). "
I saw a similar posting earlier on sdn which mentioned about an Application parameter but I already have that setup.
Regards
Anupam
Edited by: Anupam Gupta on Jul 14, 2011 1:44 PMHi Anupam,
My issue is same of urs. My application parameter is setup , but still getting the error.
Could you please tell me how u fix it,
Thanks in advance
Aryan -
Hi experts,
I detected an error that occurs when I try to copy an existing journal entry. I think that the problem is related to the maximum length of the description of the journal entry, that is 160 characters. When I copy an existing journal entry, BPC adds a prefix at the beginning of the description (for example: "COPY TO #379 :" ). The problem occurs when the length of the description of the original journal entry is close to the maximum lenght and therefore, the length of the new journal exceeds 160 characters. The only solution that comes to my mind is to try to limit the number of characters in the descriptions. Is there a different solution so that there is no need to reduce the description? Thank you in advance.Hi Tao,
it´s better to use tools like DataTransfer (DTW) or copy Express.... however if you need to "replicate" via SDK... you should use the following object of SAP:
-Company (for connect to other company)
-2 JournalEntry (for get journal entries of other database and Add on my current DB)
-SAPbobsCOM.Recordset : for get data for "other" DB
The code is something like this:
Dim rsJournalSource As SAPbobsCOM.Recordset -- get data from SQL
Dim oJournalEntries As SAPbobsCOM.JournalEntries
dim oJEMyCurrentDB as SAPbobsCOM.JournalEntries
rsJournalSource = vCompanySource.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset) -- NOTE: vcompany is connection to "other" DB
rsJournalSource.DoQuery("SELECT transID FROM OJDT WHERE your criteria")
oJournalEntries.Browser.Recordset = rsJournalSource
oJournalEntries.Browser.MoveFirst()
While Not oJournalEntries.Browser.EoF
... copy field to field and line to line...
oJEMyCurrentDB .add
oJournalEntries.Browser.MoveNext()
End While
I hope help!! -
i was doing update on my apple iphone 3g 8gb during update an error ocured namely 1015. and when i was doing restoration of my previous software version once again error ocured namely 1015.
and 2nd i have downloaded few free apps like face book twitter etc on my itunes but when iam installing them to my iphone its not installing i dont know why plz help me to install them thanksErrors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
Maybe you phone has been jailbroken -
An error ocurred during the installation of assambly
trying to install the new itune have the older one just got the 4S but cant use it on my curent itune have an error ocurred during the installation of assambly it what it says and then back tracks and stops
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
제품 : FIN_GL
작성날짜 : 2003-11-18
POSTING JOURNALS PROCESS ERROR:GL_ACCOUNT_HIERARCHIES_U1 UNIQUE CONSTRAINT Violated
========================================================================
PURPOSE
==================
GL Posting 시 발생하는 문제를 좀 더 손쉽게 파악하여 해결 할 수 있도록 한다.
Problem Description
GL Posting 시 다음과 같은 error 가 발생하였다.
SHRD0114: Executing Pro*C statement Insert into gl_account_h...
GL_PROPABLE_DUPLICATE_RANGES: APP-00001 cannot find message name
GL_PROPABLE_DUPLICATE_RANGES
SHRD0043: ERROR: ORA-00001: unique constraint (GL.
GL_ACCOUNT_HIERARCHIES_U1) violated
Workaround
N/A
Solution Description
1. 다음 문장을 수행한다.
SELECT DISTINCT
fvh1.parent_flex_value "Segment w/Overlapping Children",
SUBSTR(fvh1.child_flex_value_low,1,30) "Overlapping Child Low Value",
SUBSTR(fvh1.child_flex_value_high,1,30) "Overlapping Child High Value",
SUBSTR(fvh2.child_flex_value_low,1,30) "Overlapped By Child Low Value",
SUBSTR(fvh2.child_flex_value_high,1,30) "Overlapped By Child High Value"
FROM FND_FLEX_VALUE_HIERARCHIES fvh1, FND_FLEX_VALUE_HIERARCHIES fvh2
WHERE fvh1.parent_flex_value = fvh2.parent_flex_value
AND fvh1.flex_value_set_id = (select flex_value_set_id
from fnd_flex_value_sets
where flex_value_set_name = '&Value_Set_Name')
AND fvh1.rowid != fvh2.rowid
AND fvh1.flex_value_set_id = fvh2.flex_value_set_id
AND NVL(fvh2.CHILD_FLEX_VALUE_LOW,'X') <= NVL(fvh1.CHILD_FLEX_VALUE_HIGH,'X')
AND NVL(fvh2.CHILD_FLEX_VALUE_HIGH,'X') >= NVL(fvh1.CHILD_FLEX_VALUE_LOW,'X')
2. 다음과 같은 output 이 나올 것이다.
EXAMPLE OF OUTPUT
Enter value for value_set_name: VALUE_SET_ACCOUNT
old 11: where flex_value_set_name = '&Value_S)
new 11: where flex_value_set_name = 'VALUE_SE)
Segment w/Overlapping Children
Overlapping Child Low Value Overlapping Child High Value
Overlapped By Child Low Value Overlapped By Child High Value
1000
6000 6000
5000 6000
1000
5000 6000
6000 6000
3. 위의 output에 대한 설명은 다음과 같다.
고객이 GL Application에서 Setup->Financials->Flexfields->Key->Value화면을 열어 다음과 같은 작업을 하였다.
Entered values:
1000 defined as:
* parent
* child ranges:
From To Include
6000 6000 Child values only
3000 3000 Parent values only
3000 defined as:
* parent
* child ranges:
From To Include
2000 2000 Child values only
4000 4000 Child values only
5000 6000 Child values only
The hierarchy structure is like this:
1000
_________|___________
6000 3000
____|______________
2000 4000 5000 6000
위에서 볼수 있듯이 6000 이라는 value 가 중복이 되고 있고 그 사항이 제일 처음에 수행한 script의 output 에 overlapping child ranges 로 나타나고 있는 것이다.
4. 정정하는 step
4.1 Setup->Financials-> Flexfields-> Key->Values. 로 가서 화면을 open한다.
4.2 COA 를 Query 한다.
4.3 Overlapping 된 child ranges 를 찾아서 정정한다.
Reference Documents
Note 118130.1You can use the debug script $GL_TOP/patch/115/sql/glxacovl.sql, to isolate overlapping child ranges within summary account rollup groups.
-
RE: (forte-users) 3J= 3M new to me error
Hi Thomas,
Thanks for your email but I think it will be interesting for Brenda not me.
It is exactly what I have expected from Forte Support: detailed information
about bugs and workarounds. But what I cannot understand is that #53398 was
released without any information about possible reasons for this problem or
suggested workarounds. My first reaction after reading this bugreport was to
open a new case at CallCenter to get more information about it. Please
release more information with your bug reports !
Regards
Zenon Adamek
Information Services
Senior Programmer Analyst
Tel: 905 712-1084 ext. 3628
Fax: 905 712-6709
E-mail: zadamekpurolator.com
-----Original Message-----
From: Thomas Degen - Sun Germany Forte Tools - Bonn
[SMTP:thomas.degensun.com]
Sent: Wednesday, September 27, 2000 9:49 AM
To: Adamek, Zenon
Cc: 'Brenda Cumming'; Forte-userslists.xpedior.com
Subject: RE: (forte-users) 3J=>3M new to me error
Hi Zenon,
bug #53398 is not a bug which will likely get fixed, it's an informational
bugreport.
You might see an errorstack like Brenda has reported (and described in
informational
bugreport #53398) probably when you are doing something illegal that is
possible
via Forte Tool but Forte is not trapping it for performance reasons. Hence
you will see
the error coming from your illegal operation only at runtime, probably
only
while
running interpreted in the Forte IDE, but in worst case it might be even a
segmentation
violation.
Technotes 12448 'Sudden client partition crashes at runtime' and 11225
'Don't reparent
mapped Widgets between UserWindows at runtime' explain this matter . See
attached.
But maybe Brenda is much more experiencing a problem as described by Forte
Technote 11398 'Read Only Workspace Errors using ListViews or ActiveX
control'
that might get easily resolved via setting of FORTE_YIELD_THROTTLE=0.
Good Luck and Best Regards !
BTW: I've logged bug #53398, so I've felt responsible to explain its real
background.
Thomas
Thomas Degen
Sun Microsystems - Forte Tools
Forte CTE & Sustaining Group
Technical Support Germany
tel.:+49.228/91499-50
MailTo:thomas.degensun.com
Technote 11398 Read Only Workspace Errors using ListViews or ActiveX
control
SCENARIO:
Getting some unusual interpreter errors that result in an error stating
that
the workspace has been set to read only. Please see Enclosures for the
two
most common error stacks that have been encountered. The abbreviated
versions of the errors are:
- Can't read record (record size = -1)
- Id in index does not match id in record header in data file
- Recursive deserialization attempted.
- Unknown Mark type in deserialization
- Could not read record (64,74615) from repository data file.
Header
is corrupt.
These errors can be happening in either the development environment when
running from one of the development workshops, or with the deployed
application.
The bug outlined in this Technote may be the culprit if the errors above
are
seen when running a client on Windows NT or Motif and the user interface
incorporates ActiveX controls or ListView/TreeView widgets.
CAUSE:
Basically what is happening is that in rare circumstances Forte may invoke
a
nested copy of the interpreter while the first interpreter has yielded.
This
is not a problem in and of itself, but in the case where the original
interpreter was in the middle of a repository fetch when it yielded, and
the second interpreter needs to fetch code as well, we will get one of the
errors listed above, depending on the exact timing. The reason for the
errors is that the repository code at this level is thread-safe but not
re-entrant. It is protected by a mutex that is already owned by the
current task. Which, given the scenario outlined here, where the two
interpreters are running inside of the same task, results in the nested
interpreter being allowed to change data out from under the first.
While for every fetch one or more calls to WindowSystem.Yield will be made
(this is there to prevent the semblance of system lock-up on Win 3.1,
where
Yield is the only way other applications can be allowed to run), there is
a parameter which controls how often to actually yield, which by default
is
set to one out of every 100 calls. This is the reason the problem is
intermittent--you need a yield to occur during a repository fetch
which starts another interpreter which also needs to fetch code from
disk.
The reason this has only surfaced recently is that the nested interpreter
scenario can only happen in 2 cases that we know of:
- ActiveX controls which respond to events/Windows messages
- Outline fields/ListViews with column(s) mapped to virtual
attributes
In all other normal cases, the yield can process the message (typically a
paint message) without starting another interpreter, so regardless of
whether
the first interpreter yielded during a repository operation or not, there
is
no conflict.
SOLUTION:
The workaround is to prevent yields altogether by setting the
FORTE_YIELD_THROTTLE environment variable equal to 0 in the client's
environment. This should have no detrimental effects since the yield code
is in place solely for Windows 3.1x clients.
ERROR STACK 1
SYSTEM ERROR: Because of a prior error, your workspace was set to
read-only to
prevent the application from attempting to write to the repository. The
repository and work you have saved to the repository are safe. If your
workspace
contains unsaved work, you may use the following procedure to save this
work.
First, export the changed components. Then, shut down and restart this
application and reopen this workspace in read-write mode. Finally, import
the
changed components and save your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 695]
Detected at: qqrp_Session::GetObjectById
Last TOOL statement: method EFWindowController.EFEventLoop
Error Time: Tue Nov 18 15:58:47
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1,
taskId =
[7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1.23]) in application
"ConPlus_GUI_cl0", pid 147 on node ISD060 in environment EdgeTest.
The remainder of the Error Manager stack is:
SYSTEM ERROR: Internal Error attempting to deserialize element (64,67470)
(fetch
bitmask is 0x20). Your workspace is now read-only to prevent the
application
from attempting to write to the repository. The repository and work you
have
saved to the repository are safe. If your workspace contains unsaved work,
you
may use the following procedure to save this work. First, export the
changed
components. Then, shut down and restart this application and reopen this
workspace in read-write mode. Finally, import the changed components and
save
your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 61]
Detected at: qqrp_LogicalSession::MaterializeObject
Last TOOL statement: method EFTabManagerNew.EFNoteBookHandler
Error Time: Tue Nov 18 15:58:47
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1,
taskId =
[7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1.23]) in application
"ConPlus_GUI_cl0", pid 147 on node ISD060 in environment EdgeTest.
SYSTEM ERROR: Unknown Mark type in deserialization.
Class: qqsp_ImplementationException
Error #: [1101, 34]
Detected at: qqrp_DeSerializeObject::ProcessHdr
Error Time: Tue Nov 18 15:58:47
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1,
taskId =
[7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1.23]) in application
"ConPlus_GUI_cl0", pid 147 on node ISD060 in environment EdgeTest.
ERROR STACK 2
SYSTEM ERROR: A serious error has occurred in Repository
(c:\PROGRA~1\CSSPTEST\conplu0). Corrective action may be necessary.
Notify
your repository administrator.
Class: qqsp_ImplementationException
Error #: [1101, 198]
Detected at: qqrp_Repository::Fetch
Last TOOL statement: method
SalesDevelopment_NWC.DEVNotifyofTabSetCurrent
Error Time: Wed Dec 03 10:27:22
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1,
taskId =
[769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1.22]) in application
"ConPlus_GUI_cl0", pid 172 on node ISD42 in environment Edge.
SYSTEM ERROR: Could not read record (64,74615) from repository data file.
Header is corrupt.
Class: qqsp_ImplementationException
Error #: [1106, 612]
Detected at: qqbt_BtreeAccess::FetchDataFileRecord
Error Time: Wed Dec 03 10:27:22
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1,
taskId =
[769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1.22]) in application
"ConPlus_GUI_cl0", pid 172 on node ISD42 in environment Edge.
Technote 11225 Don't reparent mapped Widgets between UserWindows at
runtime
It is sometimes tempting to unparent a widget from one UserWindow and
reparent
it into another at runtime. However, this can cause crashes if the widget
(or
its decendants) are "mapped" to data. Here's why...
Suppose you have two UserWindows, UW1 and UW2. UW1 contains a DataField
(DF1)
which is mapped to a TextData. UW2 contains a RadioList (RL2) which is
mapped to
a scalar Integer. At compile time, every mapped attribute is internally
assigned
a "Map ID" (a small integer) which is used to tie the Widget to its
corresponding attribute. These Map IDs are used by the Widget to look up a
pointer to their data in a "Map" which is maintained by the UserWindow.
Each
UserWindow is assumed be to independent of the others, so there is nothing
wrong
with Widgets in different UserWindows being assigned the same Map IDs.
In
this
case, let's assume that DF1 and RL2 both got assigned the same Map ID of
3. No
problem so far, since each lives in a separate UserWindow with a separate
map.
Now suppose at runtime the application "detaches" or unparents DF1 from
its
UserWindow and reparents it somewhere into UW2. When it comes time for DF1
to
paint itself the Display System it must ask the Runtime System for the
value of
DF1's mapped attribute. To do that it says "give me the value of the
TextData
for DF1. You'll find it in the Map for this UserWindow (UW1), and its Map
ID is
3". When the runtime system goes to do this it expects to find a TextData
in
this "slot" of the map, but instead it picks up the integer which is
mapped to
RL2. At best this leads to bad data being returned; more likely you get a
segfault and a crash.
If DF1 was not a mapped attribute (say, a Rectangle) there would be no
problem
because there is no data mapped to a Rectangle. If instead of moving DF1
you
created a brand new DataField on the fly there would be no problem,
because the
dynamic DataField would not have any Map ID and so couldn't conflict with
any
IDs in UW2.
So how do you solve this problem? This is exactly what Nested Windows are
all
about. While you can't move DF1 into the middle of UW2, you can nest
UW1.
This
works because UW1 brings its map with it, and when you access DF1 it knows
to
look up its value in UW1's map.
UserWindows are intended to be the "unit of compilabilty" that can be
nested
inside other UserWindows. It is dangerous to "transplant" anything from
inside
one UserWindow into another at runtime.
(Note that you can't avoid this problem by cloning DF1 because the MapID
gets
copied along with it, and the clone will fail in the same way.)
Further details explained in related technote 12448 'Sudden client
partition
crashes at runtime.'
Technote 12448 Sudden client partition crashes at runtime
Scenario : You have two UserWindows, A and B. When Window A starts up, it
instantiates an instance of B and reparents some component of B into A's
window
hierarchy.
This is not allowed and almost always leads to an error at best or at
worse a
segmentation fault.
Here's why :
When you compile a UserWindow in Forte, each "mapped attribute" (whether a
form
element or menu element) is assigned an internal ID which represents an
offset into
that UserWindow's table of mapped attributes. This offset is only valid
in the
context of the UserWindow in which it was compiled. If you detach a
FieldWidget or
MenuWidget from one compiled Window ("tmpMenu" for example) and then
parent
into another compiled window ("tmpWindow") the internal ID comes with it.
When Forte tries to make use of that copied widget it uses the ID as an
offset
into tmpWindow's table of mapped attributes. But that copied offset is
meaningless in the context of tmpWindow's table, so you get some kind off
error.
In this case it found that the data type of the variable in the slot
wasn't
what
was expected. But you might even index off the end of the table and get a
segmentation fault.
There is nothing to prevent you from dynamically creating menu items and
adding
them to a window at runtime; that will work fine. Although of course you
can't
access them via mapped attributes, since those can only be created at
compile time.
But you are not allowed to reparent a widget from one compiled UserWindow
into
the hierarchy of another.
More information may be found in technote 11225 'Don't reparent mapped
Widgets
between UserWindows at runtime'.
Possible errorstacks seen at runtime instead of a complete crash or
segmentation
violation while you are illegally reparenting a widget or menuitem between
windows
at runtime:
Map::SetSubjectData: Invalid conversion from map type 0 to subject type 22
SYSTEM ERROR: Bad parameter at location 3 in method
qqrt_MapClassAccess::ProcessSubjectData.
Class: qqsp_Exception
Error #: [1001, 381]
Detected at: qqrt_MapClassAccess::ProcessSubjectData at 3
Error Time: Wed Aug 09 13:03:57
Exception occurred (locally) on partition "testproject_CL0_Client",
(partitionId = D4914A10-36C1-11D4-91B3-419AA33BAA77:0x208:0xd,
taskId =
[D4914A10-36C1-11D4-91B3-419AA33BAA77:0x208:0xd.68]) in application
"FTLaunch_cl0", pid 672 on node ONEWAY in environment Audi3M2Env.
At 13:14 26.09.00 -0400, Adamek, Zenon wrote:
Hi,
It is the unfixed defect 53398. Please contact Forte support.
Zenon
-----Original Message-----
From: Brenda Cumming [SMTP:brenda_cummingtranscanada.com]
Sent: Tuesday, September 26, 2000 1:15 PM
To: Forte User group
Subject: (forte-users) 3J=>3M new to me error
Hi,
We are in the process of going from 3J1 to 3.0.M.2, and I am getting
this error that I am unfamiliar with on a GUI that works fine in 3J.
It
does not happen all the time, and I have been unable to establish the
pattern that kicks it off. Has anyone seen this before?
PS- this error is not occurring in the deployed (non-compiled) app,but
when I am running locally from my workspace.
SYSTEM ERROR: Bad parameter at location 6 in method
qqrt_MapClassAccess::ProcessSubjectData.
Class: qqsp_Exception
Error #: [1001, 381]
Detected at: qqrt_MapClassAccess::ProcessSubjectData at 6
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition
"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2,
taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Can't find scope 20070 for a class.
Class: qqsp_Exception
Error #: [201, 11]
Detected at: qqlo_ClassTableLoadScope at 1
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Because of a prior error, your workspace was set to
read-only to prevent the application from attempting to write to the repository.
The repository and work you have saved to the repository are safe. If
your
workspace contains unsaved work, you may use the following procedure
to save this work. First, export the changed components. Then, shut down and
restart this application and reopen this workspace in read-write mode.
Finally, import the changed components and save your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 695]
Detected at: qqrp_Session::IsDistributed
Last TOOL statement: method PPMeasWin.
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition
"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Internal Error attempting to deserialize element
(64,120684) (fetch bitmask is 0x20). Your workspace is now read-onlyto
prevent
the application from attempting to write to the repository. The
repository
and work you have saved to the repository are safe. If your workspace
contains unsaved work, you may use the following procedure to savethis
work.
First, export the changed components. Then, shut down and restart this
application and reopen this workspace in read-write mode. Finally, import the
changed components and save your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 61]
Detected at: qqrp_LogicalSession::MaterializeObject
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition
"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Recursive Deserialization attempted, Internal Error!
Class: qqsp_UsageException with ReasonCode: SP_ER_INVALIDSTATE
Error #: [301, 231]
Detected at: qqsp_DeSerializeDriver::Run at 1
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to:forte-users-requestlists.xpedior.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.comHi Thomas,
Thanks for your email but I think it will be interesting for Brenda not me.
It is exactly what I have expected from Forte Support: detailed information
about bugs and workarounds. But what I cannot understand is that #53398 was
released without any information about possible reasons for this problem or
suggested workarounds. My first reaction after reading this bugreport was to
open a new case at CallCenter to get more information about it. Please
release more information with your bug reports !
Regards
Zenon Adamek
Information Services
Senior Programmer Analyst
Tel: 905 712-1084 ext. 3628
Fax: 905 712-6709
E-mail: zadamekpurolator.com
-----Original Message-----
From: Thomas Degen - Sun Germany Forte Tools - Bonn
[SMTP:thomas.degensun.com]
Sent: Wednesday, September 27, 2000 9:49 AM
To: Adamek, Zenon
Cc: 'Brenda Cumming'; Forte-userslists.xpedior.com
Subject: RE: (forte-users) 3J=>3M new to me error
Hi Zenon,
bug #53398 is not a bug which will likely get fixed, it's an informational
bugreport.
You might see an errorstack like Brenda has reported (and described in
informational
bugreport #53398) probably when you are doing something illegal that is
possible
via Forte Tool but Forte is not trapping it for performance reasons. Hence
you will see
the error coming from your illegal operation only at runtime, probably
only
while
running interpreted in the Forte IDE, but in worst case it might be even a
segmentation
violation.
Technotes 12448 'Sudden client partition crashes at runtime' and 11225
'Don't reparent
mapped Widgets between UserWindows at runtime' explain this matter . See
attached.
But maybe Brenda is much more experiencing a problem as described by Forte
Technote 11398 'Read Only Workspace Errors using ListViews or ActiveX
control'
that might get easily resolved via setting of FORTE_YIELD_THROTTLE=0.
Good Luck and Best Regards !
BTW: I've logged bug #53398, so I've felt responsible to explain its real
background.
Thomas
Thomas Degen
Sun Microsystems - Forte Tools
Forte CTE & Sustaining Group
Technical Support Germany
tel.:+49.228/91499-50
MailTo:thomas.degensun.com
Technote 11398 Read Only Workspace Errors using ListViews or ActiveX
control
SCENARIO:
Getting some unusual interpreter errors that result in an error stating
that
the workspace has been set to read only. Please see Enclosures for the
two
most common error stacks that have been encountered. The abbreviated
versions of the errors are:
- Can't read record (record size = -1)
- Id in index does not match id in record header in data file
- Recursive deserialization attempted.
- Unknown Mark type in deserialization
- Could not read record (64,74615) from repository data file.
Header
is corrupt.
These errors can be happening in either the development environment when
running from one of the development workshops, or with the deployed
application.
The bug outlined in this Technote may be the culprit if the errors above
are
seen when running a client on Windows NT or Motif and the user interface
incorporates ActiveX controls or ListView/TreeView widgets.
CAUSE:
Basically what is happening is that in rare circumstances Forte may invoke
a
nested copy of the interpreter while the first interpreter has yielded.
This
is not a problem in and of itself, but in the case where the original
interpreter was in the middle of a repository fetch when it yielded, and
the second interpreter needs to fetch code as well, we will get one of the
errors listed above, depending on the exact timing. The reason for the
errors is that the repository code at this level is thread-safe but not
re-entrant. It is protected by a mutex that is already owned by the
current task. Which, given the scenario outlined here, where the two
interpreters are running inside of the same task, results in the nested
interpreter being allowed to change data out from under the first.
While for every fetch one or more calls to WindowSystem.Yield will be made
(this is there to prevent the semblance of system lock-up on Win 3.1,
where
Yield is the only way other applications can be allowed to run), there is
a parameter which controls how often to actually yield, which by default
is
set to one out of every 100 calls. This is the reason the problem is
intermittent--you need a yield to occur during a repository fetch
which starts another interpreter which also needs to fetch code from
disk.
The reason this has only surfaced recently is that the nested interpreter
scenario can only happen in 2 cases that we know of:
- ActiveX controls which respond to events/Windows messages
- Outline fields/ListViews with column(s) mapped to virtual
attributes
In all other normal cases, the yield can process the message (typically a
paint message) without starting another interpreter, so regardless of
whether
the first interpreter yielded during a repository operation or not, there
is
no conflict.
SOLUTION:
The workaround is to prevent yields altogether by setting the
FORTE_YIELD_THROTTLE environment variable equal to 0 in the client's
environment. This should have no detrimental effects since the yield code
is in place solely for Windows 3.1x clients.
ERROR STACK 1
SYSTEM ERROR: Because of a prior error, your workspace was set to
read-only to
prevent the application from attempting to write to the repository. The
repository and work you have saved to the repository are safe. If your
workspace
contains unsaved work, you may use the following procedure to save this
work.
First, export the changed components. Then, shut down and restart this
application and reopen this workspace in read-write mode. Finally, import
the
changed components and save your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 695]
Detected at: qqrp_Session::GetObjectById
Last TOOL statement: method EFWindowController.EFEventLoop
Error Time: Tue Nov 18 15:58:47
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1,
taskId =
[7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1.23]) in application
"ConPlus_GUI_cl0", pid 147 on node ISD060 in environment EdgeTest.
The remainder of the Error Manager stack is:
SYSTEM ERROR: Internal Error attempting to deserialize element (64,67470)
(fetch
bitmask is 0x20). Your workspace is now read-only to prevent the
application
from attempting to write to the repository. The repository and work you
have
saved to the repository are safe. If your workspace contains unsaved work,
you
may use the following procedure to save this work. First, export the
changed
components. Then, shut down and restart this application and reopen this
workspace in read-write mode. Finally, import the changed components and
save
your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 61]
Detected at: qqrp_LogicalSession::MaterializeObject
Last TOOL statement: method EFTabManagerNew.EFNoteBookHandler
Error Time: Tue Nov 18 15:58:47
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1,
taskId =
[7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1.23]) in application
"ConPlus_GUI_cl0", pid 147 on node ISD060 in environment EdgeTest.
SYSTEM ERROR: Unknown Mark type in deserialization.
Class: qqsp_ImplementationException
Error #: [1101, 34]
Detected at: qqrp_DeSerializeObject::ProcessHdr
Error Time: Tue Nov 18 15:58:47
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1,
taskId =
[7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1.23]) in application
"ConPlus_GUI_cl0", pid 147 on node ISD060 in environment EdgeTest.
ERROR STACK 2
SYSTEM ERROR: A serious error has occurred in Repository
(c:\PROGRA~1\CSSPTEST\conplu0). Corrective action may be necessary.
Notify
your repository administrator.
Class: qqsp_ImplementationException
Error #: [1101, 198]
Detected at: qqrp_Repository::Fetch
Last TOOL statement: method
SalesDevelopment_NWC.DEVNotifyofTabSetCurrent
Error Time: Wed Dec 03 10:27:22
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1,
taskId =
[769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1.22]) in application
"ConPlus_GUI_cl0", pid 172 on node ISD42 in environment Edge.
SYSTEM ERROR: Could not read record (64,74615) from repository data file.
Header is corrupt.
Class: qqsp_ImplementationException
Error #: [1106, 612]
Detected at: qqbt_BtreeAccess::FetchDataFileRecord
Error Time: Wed Dec 03 10:27:22
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1,
taskId =
[769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1.22]) in application
"ConPlus_GUI_cl0", pid 172 on node ISD42 in environment Edge.
Technote 11225 Don't reparent mapped Widgets between UserWindows at
runtime
It is sometimes tempting to unparent a widget from one UserWindow and
reparent
it into another at runtime. However, this can cause crashes if the widget
(or
its decendants) are "mapped" to data. Here's why...
Suppose you have two UserWindows, UW1 and UW2. UW1 contains a DataField
(DF1)
which is mapped to a TextData. UW2 contains a RadioList (RL2) which is
mapped to
a scalar Integer. At compile time, every mapped attribute is internally
assigned
a "Map ID" (a small integer) which is used to tie the Widget to its
corresponding attribute. These Map IDs are used by the Widget to look up a
pointer to their data in a "Map" which is maintained by the UserWindow.
Each
UserWindow is assumed be to independent of the others, so there is nothing
wrong
with Widgets in different UserWindows being assigned the same Map IDs.
In
this
case, let's assume that DF1 and RL2 both got assigned the same Map ID of
3. No
problem so far, since each lives in a separate UserWindow with a separate
map.
Now suppose at runtime the application "detaches" or unparents DF1 from
its
UserWindow and reparents it somewhere into UW2. When it comes time for DF1
to
paint itself the Display System it must ask the Runtime System for the
value of
DF1's mapped attribute. To do that it says "give me the value of the
TextData
for DF1. You'll find it in the Map for this UserWindow (UW1), and its Map
ID is
3". When the runtime system goes to do this it expects to find a TextData
in
this "slot" of the map, but instead it picks up the integer which is
mapped to
RL2. At best this leads to bad data being returned; more likely you get a
segfault and a crash.
If DF1 was not a mapped attribute (say, a Rectangle) there would be no
problem
because there is no data mapped to a Rectangle. If instead of moving DF1
you
created a brand new DataField on the fly there would be no problem,
because the
dynamic DataField would not have any Map ID and so couldn't conflict with
any
IDs in UW2.
So how do you solve this problem? This is exactly what Nested Windows are
all
about. While you can't move DF1 into the middle of UW2, you can nest
UW1.
This
works because UW1 brings its map with it, and when you access DF1 it knows
to
look up its value in UW1's map.
UserWindows are intended to be the "unit of compilabilty" that can be
nested
inside other UserWindows. It is dangerous to "transplant" anything from
inside
one UserWindow into another at runtime.
(Note that you can't avoid this problem by cloning DF1 because the MapID
gets
copied along with it, and the clone will fail in the same way.)
Further details explained in related technote 12448 'Sudden client
partition
crashes at runtime.'
Technote 12448 Sudden client partition crashes at runtime
Scenario : You have two UserWindows, A and B. When Window A starts up, it
instantiates an instance of B and reparents some component of B into A's
window
hierarchy.
This is not allowed and almost always leads to an error at best or at
worse a
segmentation fault.
Here's why :
When you compile a UserWindow in Forte, each "mapped attribute" (whether a
form
element or menu element) is assigned an internal ID which represents an
offset into
that UserWindow's table of mapped attributes. This offset is only valid
in the
context of the UserWindow in which it was compiled. If you detach a
FieldWidget or
MenuWidget from one compiled Window ("tmpMenu" for example) and then
parent
into another compiled window ("tmpWindow") the internal ID comes with it.
When Forte tries to make use of that copied widget it uses the ID as an
offset
into tmpWindow's table of mapped attributes. But that copied offset is
meaningless in the context of tmpWindow's table, so you get some kind off
error.
In this case it found that the data type of the variable in the slot
wasn't
what
was expected. But you might even index off the end of the table and get a
segmentation fault.
There is nothing to prevent you from dynamically creating menu items and
adding
them to a window at runtime; that will work fine. Although of course you
can't
access them via mapped attributes, since those can only be created at
compile time.
But you are not allowed to reparent a widget from one compiled UserWindow
into
the hierarchy of another.
More information may be found in technote 11225 'Don't reparent mapped
Widgets
between UserWindows at runtime'.
Possible errorstacks seen at runtime instead of a complete crash or
segmentation
violation while you are illegally reparenting a widget or menuitem between
windows
at runtime:
Map::SetSubjectData: Invalid conversion from map type 0 to subject type 22
SYSTEM ERROR: Bad parameter at location 3 in method
qqrt_MapClassAccess::ProcessSubjectData.
Class: qqsp_Exception
Error #: [1001, 381]
Detected at: qqrt_MapClassAccess::ProcessSubjectData at 3
Error Time: Wed Aug 09 13:03:57
Exception occurred (locally) on partition "testproject_CL0_Client",
(partitionId = D4914A10-36C1-11D4-91B3-419AA33BAA77:0x208:0xd,
taskId =
[D4914A10-36C1-11D4-91B3-419AA33BAA77:0x208:0xd.68]) in application
"FTLaunch_cl0", pid 672 on node ONEWAY in environment Audi3M2Env.
At 13:14 26.09.00 -0400, Adamek, Zenon wrote:
Hi,
It is the unfixed defect 53398. Please contact Forte support.
Zenon
-----Original Message-----
From: Brenda Cumming [SMTP:brenda_cummingtranscanada.com]
Sent: Tuesday, September 26, 2000 1:15 PM
To: Forte User group
Subject: (forte-users) 3J=>3M new to me error
Hi,
We are in the process of going from 3J1 to 3.0.M.2, and I am getting
this error that I am unfamiliar with on a GUI that works fine in 3J.
It
does not happen all the time, and I have been unable to establish the
pattern that kicks it off. Has anyone seen this before?
PS- this error is not occurring in the deployed (non-compiled) app,but
when I am running locally from my workspace.
SYSTEM ERROR: Bad parameter at location 6 in method
qqrt_MapClassAccess::ProcessSubjectData.
Class: qqsp_Exception
Error #: [1001, 381]
Detected at: qqrt_MapClassAccess::ProcessSubjectData at 6
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition
"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2,
taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Can't find scope 20070 for a class.
Class: qqsp_Exception
Error #: [201, 11]
Detected at: qqlo_ClassTableLoadScope at 1
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Because of a prior error, your workspace was set to
read-only to prevent the application from attempting to write to the repository.
The repository and work you have saved to the repository are safe. If
your
workspace contains unsaved work, you may use the following procedure
to save this work. First, export the changed components. Then, shut down and
restart this application and reopen this workspace in read-write mode.
Finally, import the changed components and save your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 695]
Detected at: qqrp_Session::IsDistributed
Last TOOL statement: method PPMeasWin.
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition
"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Internal Error attempting to deserialize element
(64,120684) (fetch bitmask is 0x20). Your workspace is now read-onlyto
prevent
the application from attempting to write to the repository. The
repository
and work you have saved to the repository are safe. If your workspace
contains unsaved work, you may use the following procedure to savethis
work.
First, export the changed components. Then, shut down and restart this
application and reopen this workspace in read-write mode. Finally, import the
changed components and save your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 61]
Detected at: qqrp_LogicalSession::MaterializeObject
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition
"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Recursive Deserialization attempted, Internal Error!
Class: qqsp_UsageException with ReasonCode: SP_ER_INVALIDSTATE
Error #: [301, 231]
Detected at: qqsp_DeSerializeDriver::Run at 1
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to:forte-users-requestlists.xpedior.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
Webex Connect "An unknown error ocurred connecting the server" Error Message
Hi,
We have the latest Cisco Webex Connect Clients (7.1.1 Build 16597) in use in our company. With no obvious reason one of our employees now can't connect to Webex Connect getting the Error Message "An unknown error ocurred while connecting to the server." We tried to close and re open the client and to re-enter the password, both with no succes. Using another Jabber/XMPP capable IM Client works but not using Cisco Webex Connect.
Can anyone help?
Cheers,
PatrickYou may face this issue if your IE is working in offline mode.
To resolve:
Try going to google.com on internet explorer.
Click on connect when prompted.
Once google.com opens fine then try logging in to the WebEx Connect again.
It should work now. -
When I try to download all my info like notes and contacts onto a new iphone an error appears saying that it is incompatible or the backup was corrup, how do I fix this?
Which is it? Is "it" incompatible or is the backup corrupt?
What specifically are you attempting and what specifically is occurring?
Maybe you are looking for
-
Search Item drop-down does not show any data for Advanced Search.
Hi, I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the b
-
Anyone else having trouble with home sharing? It was working fine just yesterday. Today, my AppleTV doesn't see my computer and I can't use AirPlay from my iPhone. I rebooted the AppleTV, which wasn't even able to connect to iTunes. It connected just
-
How to edit working hours in the calendar rules
Hi.. Does anybody know how to change the working hours in the calendar rule editor as in mine case those working hours are already frozen. Ritu
-
Help needed to configure WVC54GC cam with BEFW11S4 router:
OK...I have to admit that I'm finally having to ask for help! I'm handy with most computer problems, but i.p. addresses, port forwarding and dns stuff is kinda over my head. I need someone to walk me through the steps. I've got the camera setup to
-
How to recover till point of failure
dear all, i m a newbie and i have one q regarding rman --i have yesterday backup and i want to recover the database till point of failure (eg.point of failure of any datafile or tablespace or redolog or controlfile).how can i recover the database? to